Engineering Education Commons^™

Elevating The Underrepresented And Marginalized Using Experiences In Stem (Lumens): A Stem Diversity And Inclusion Initiative, Robert Cobb Jr, Paula E. Faulkner, Deiadra Modlin, Obinna Chiekezi, Victoria Cobbold, Madison Beaudoin

Journal of Research Initiatives

The study offered a 5-week summer immersion program to address the shortage of students from underrepresented populations enrolling in degree programs and seeking careers in science, technology, engineering, and mathematics (STEM). The study also addressed the importance of offering summer immersion programs to close the achievement gap. A quantitative descriptive design was used to gather data from participants related to STEM lessons during the program. Gender, grade level, and race served as the demographic variables. The study included 21 secondary students in grades 9–12. Pre- and post-tests assessed participants' knowledge gain regarding STEM lessons. Data analyzed with SPSS version 29 …

Beyond Cultural Responsiveness: Elevating African American Stem Education Through African-Centered Models, Deanna Bailey, Charnee Bowens, Tamara Altman

Journal of Pre-College Engineering Education Research (J-PEER)

Researchers posit that the way science, technology, engineering, and mathematics (STEM) are taught to African Americans contributes to their underrepresentation in the STEM fields. STEM educators are increasingly utilizing culturally relevant pedagogy, culturally responsive teaching strategies, and culturally sustaining pedagogy to engage the African American STEM learner. However, these techniques are limited in addressing the holistic development, healing, and needs of African people.^[1] This essay advocates for the use and study of a new educational model titled African-centered STEM education (ACSE). The authors contend that this model is effective for African American STEM learners and African people and benefits …

Safety In P–12 Engineering Courses Within The Southern United States, Tyler S. Love

Journal of Pre-College Engineering Education Research (J-PEER)

Engineering education programs, especially at the P–12 level, pose inherent legal and ethical responsibilities pertaining to safety that cannot be ignored. Cultivating safer practices and habits during the design and hands-on development of engineering solutions starts well before students enter higher education engineering programs. P–12 engineering education programs play a critical role in enhancing safety awareness, developing safer habits, and improving safety culture, which has an influence on the safety practices that students carry with them into higher education programs and the workplace. This study analyzed the safety factors and accident occurrences reported by 305 P–12 engineering educators from the …

Immersive Virtual Labs For Enhancing In-Person And Online Education, Yiyang Li, Yuzhong Shen, Charles I. Sukenik

Electrical & Computer Engineering Faculty Publications

Labs play a critical role in science and engineering education, offering practical insights and hands-on experience to students that can't be achieved through theoretical learning alone. With the continuous advancement in technology, education is being reshaped and many universities are now offering online programs. This shift in educational paradigm offers students access to a wider range of academic resources, without being limited by geographical boundaries, time constraints, among others. However, the rise of online education also brings unique challenges, such as lack of face-to-face interaction and limited hands-on learning experiences. Virtual labs, which allow students to conduct experiments in a …

Library Steam Kits: Developing Circulatable Curriculum For Community Steam Learning, Daphne Fauber, Ashley Fletcher

Purdue Journal of Service-Learning and International Engagement

Public libraries serve as repositories for a movement described as cultivation of the Library of Things. In the wake of COVID-19, the West Lafayette Public Library enhanced its existing Library of Things collection through the creation of science, technology, engineering, art, and mathematics (STEAM) kits. Since 2017, the West Lafayette Public Library has held regular free STEAM programs for the community; those programs were put on hold during the height of the COVID-19 pandemic, which concurred with a library renovation. These kits provide the community with the ability to learn STEAM concepts at home engaging, hands-on activities that may otherwise …

Prairie Protector: Student Development Of Systems Thinking Habits In The Context Of Agroecosystems, Erin Ingram, Jennifer Keshwani

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Introduction: The Great Plains ecosystem offers an opportunity for young people to gain knowledge about intricate systems through practical learning. The spread of woody plants into grasslands, known as the “Green Glacier,” poses a risk to biodiversity and animal production. Although effective management strategies exist, some land managers are reluctant to use them. It is critical to cultivate a scientifically literate population that can think systematically and make informed decisions based on STEM principles to address such complex agroecosystem problems.

Methods: In this study, semi-structured focus group discussions with high school students were analyzed to determine whether Prairie …

Flipping The Digital Switch: Affective Responses Of Stem Undergraduates To Emergency Remote Teaching During The Covid-19 Pandemic, Angela Minichiello, Oenardi Lawanto, Wade Goodridge, Assad Iqbal, Muhammad Asghar

Engineering Education Student Research

The Corona Virus Disease-2019 (COVID-19) catalyzed a global shift to distance education known as an emergency transition to remote teaching (ERT). While prior research investigates students' experiences during traditional online learning, fewer studies examine students' affective responses (i.e., feelings, emotions) to those experiences, particularly when remote learning is unexpected and unplanned. To understand how science, technology, engineering, and mathematics (STEM) undergraduates responded affectively to the COVID-19 ERT, researchers generated open-ended survey data with 1340 undergraduates (253 female) in 27 courses across seven U.S. institutions. Using an inductive qualitative approach, researchers developed a three-tier thematic model to synthesize the self-reported reasons …

Blast-Building Leaders For Advancing Science And Technology: A Partnership Between The Virginia Space Grant Consortium And The University Of Virginia, Virginia Polytechnic Institute, And Old Dominion University, Cynthia Tomovic, Mary Sandy, Julie Back, Vukica Jovanovic, Kim Lester, Edward Murphy, Sueanne Mckinney, Mileta Tomovic

STEMPS Faculty Publications

This paper presents the development and delivery of educational summer intensive programs for high school students that are designed to encourage students’ interests in the STEM-related fields and the motivation to pursue a STEM-related degrees in college. BLAST (Building Leaders to Advance Science and Technology) is designed as a summer-intensive, residential, on-campus STEM-learning experience for rising ninth and tenth graders. With the intention of improving the STEM-related workforce pipeline in the Commonwealth of Virginia, Virginia Space Grant Consortium (VSGC) offers multiple BLAST programs across the Commonwealth. BLAST programs are designed as intensive three-day, STEM-related three-hour lecture-lab experiences that are reinforced …

Insights From Two Decades Of P-12 Engineering Education Research, Cary I. Sneider, Mihir K. Ravel

Journal of Pre-College Engineering Education Research (J-PEER)

The 21st century has seen a growing movement in the United States towards the adoption of engineering and technology as a complement to science education. Motivated by this shift, this article offers insights into engineering education for grades P-12, based on a landscape review of 263 empirical research studies spanning the two decades from January 2000 to June 2021. These insights are organized around three core themes: (1) students’ understandings, skills, and attitudes about engineering and technology; (2) effective methods of P-12 engineering education; and (3) benefits of P-12 engineering education. The insights are captured in the form of evidence-based …

Designing An Integrated Stem Semester For Pre-Service Elementary Teachers, Amanda Thomas, Matt Flores, Michael Hart, Elizabeth Hasseler, Tammera Mittelstet, Danae Peterson, Amy Sokoll Bauer

Department of Teaching, Learning, and Teacher Education: Faculty Publications

Teacher educators in an undergraduate elementary teacher certification program at a large university in the United States redesigned the traditional program to integrate STEM learning across multiple courses. During this Integrated STEM Semester, typically taken during the fifth semester of the undergraduate program, pre-service teachers (PSTs) enroll in mathematics content, mathematics methods, science methods, instructional technology, and practicum courses.

Facilitating Veteran And Adult Students' Learning And Retention In Engineering: Faculty-Student Partnership - A Model Of An Evidence-Based Practice, Kim E. Bullington, Anthony Dean, Cynthia Tomovic, Vukica M. Jovanović, Rafael E. Landaeta

Engineering Technology Faculty Publications

With the growing number of adult and military veterans entering higher education, it is important to understand and incorporate the basics of andragogy in curriculum, course development, and the learning environment to facilitate learning and degree completion. Researchers in this S-STEM project funded by the NSF share observations of a student-faculty partnership that resulted from the development of a formal learning community. A series of targeted seminars were conducted that appear to have increased adult and military veteran engineering and technology students’ levels of connectedness and self-efficacy. Results of this pilot study are shared as an evidence-based practice to enhance …

Possible Self Dynamics Of Community College Students Engaged In 3d Printing In Informal Environments, Lawrence Ralph Nightingale Jr.

Educational Leadership & Workforce Development Theses & Dissertations

The overall number of students from diverse backgrounds and women that graduate from community college with degrees in high paying Science Technology Engineering and Mathematics (STEM) disciplines is unacceptably low. The number of opportunities to gain exposure to STEM-based expressions of technology to overcome the dearth of exposure in high school is limited in community college. 3D Printing uses computer-controlled machines to build physical objects one layer at a time starting from the bottom up. The computer-controlled nature of 3D Printing provides a low risk, low cost platform to exercise elements of computer programming and engineering.

This study was a …

Saperi: Approaching Gender Gap Using Spatial Ability Training Week In High-School Context, Maria Giulia Ballatore, Gavin Duffy, Sheryl Sorby, Anita Tabacco

Articles

Maria Giulia Ballatore, Gavin Duffy, Sheryl Sorby, and Anita Tabacco. 2020. SAperI: approaching gender gap using Spatial Ability training week in high-school context. In Eighth International Conference on Technological Ecosystems for Enhancing Multiculturality (TEEM’20), October 21–23, 2020, Salamanca, Spain. ACM, New York, NY, USA, 7 pages. https://doi.org/10.1145/3434780.3436577

Sensing And Measuring The Environment Workshop As Exposure To Engineering Technology For High School Students In A Summer Residential Camp, Vukica M. Jovanovic, Otilia Popescu, Murat Kuzlu, Mujde Erten-Unal, Balŝa Terzić, George Mcleod, Tysha Batts, Cynthia Tomovic

Engineering Technology Faculty Publications

Summer programs are the latest trend in extracurricular STEM education programs offered by universities. Efforts are made towards residential summer programs, which have the ability to expose students not only to specially designed STEM activities but to the university campus environment and student life, as well. These types of programs are expected to have better success in getting students engaged and to capture their interest in STEM fields. This paper presents one example of designing and implementing a summer residential workshop in order to expose high school students to the field of engineering technology, specifically to electrical circuits, electrical prototyping, …

Exploratory Learning Activities In The Physics Classroom: Contrasting Cases Versus A Rich Dataset., Campbell Rightmyer Bego

Electronic Theses and Dissertations

In exploratory learning, students engage in an exploration activity on a new topic prior to instruction. This inversion of the traditional tell-then-practice order has been shown to benefit learning outcomes, especially conceptual knowledge and preparation for future learning, but not always. In three studies, the current work examines whether the type of exploration activity impacts learning mechanisms and outcomes, on the topic of gravitational field in undergraduate physics classrooms. Activities using either contrasting cases (CC) or a rich dataset (RD) are compared in two instructional orders, explore-first (EF) and instruct-first (IF). Learning outcomes measured procedural knowledge, conceptual knowledge, and performance …

A Systematic Review Of Studies On Educational Robotics, Saira Anwar, Nicholas Alexander Bascou, Muhsin Menekse, Asefeh Kardgar

Journal of Pre-College Engineering Education Research (J-PEER)

There has been a steady increase in the number of studies investigating educational robotics and its impact on academic and social skills of young learners. Educational robots are used both in and out of school environments to enhance K–12 students’ interest, engagement, and academic achievement in various fields of STEM education. Some prior studies show evidence for the general benefits of educational robotics as being effective in providing impactful learning experiences. However, there appears to be a need to determine the specific benefits which have been achieved through robotics implementation in K–12 formal and informal learning settings. In this study, …

Ocean Underwater Scene Dioramas Of First Graders With Submarine Porthole Views, Ksenia Zhbanova, Audrey C. Rule, Denise A. Tallakson

Journal of STEM Arts, Crafts, and Constructions

Ecology education of the younger generations is vital for worldwide change of people’s attitudes toward nature warranted by the current global ecological crisis. Yet, this goal needs to be addressed through age-appropriate activities that are educational and engaging. This practical article focuses on dioramas of ocean reef life made by first graders. This arts-integrated project served two main purposes: 1) education of primary students about ocean ecology and helping students realize their roles in saving nature 2) increasing student science content knowledge. Additionally, several other benefits of making dioramas emerged during this project, including highly creative student products, genuine interest …

Editorial: Developing Creativity Through Stem Subjects Integrated With The Arts, Ksenia Zhbanova

Journal of STEM Arts, Crafts, and Constructions

This issue of the Journal of STEM Arts, Crafts, and Constructions is focused on creativity - one of the most highly-desirable 21^st Century skills on personal and global levels. Time, pedagogical knowledge, and resource constraints limit the number of opportunities for teachers to develop creativity in students. In this editorial, creativity development steps and strategies are illuminated along with specific roles of STEM subjects and the arts in development of student creativity. The processes of creativity development used in STEM and the arts are compared to each other and to the non-subject-specific creative process model of Root-Bernstein and Root- …

Leaders Like Me, Kyle F. Trenshaw, Nir Aish, Elif Miskioglu, Philip Asare

Faculty Conference Papers and Presentations

The Workshop Program at the University of Rochester infuses collaborative learning into a variety of introductory STEM and non-STEM courses through small, weekly, peer-led problem solving sessions called "Workshops." Decades of data from these Workshops indicate that 1) African American, Black, Hispanic, and Latinx students are less likely to attend them than White and Asian students and 2) that every additional Workshop students attend improves their final course grades, even if they only miss a single Workshop out of the 13 or 14 that are offered each semester. To address this situation, the UR Workshop Program has partnered with the …

5th/6th Graders And Preservice Teachers Explore Engineering And Coding In A Combined After-School Technology Club/Educational Technology Course, Jennifer Kidd, Sam Sacks, Krishnanand Kaipa, Kelly Rippard

Teaching & Learning Faculty Publications

Elementary schools are increasingly encouraged to adopt STEM education efforts that include engineering and programming, yet pre-service teachers (PSTs) are not traditionally prepared to teach these subjects. This pilot study describes an innovative preparation experience designed to help PSTs gain experience and confidence in these areas. As part of an undergraduate educational technology course, PSTs led an after-school technology club at a local public school. PSTs enrolled in the course worked alongside fifth and sixth grade students on a series of collaborative design challenges that culminated in the creation of animal-inspired robots. The “WoW Club”, as it came to be …

Report From The Stem 2026 Workshop On Assessment, Evaluation, And Accreditation, Rebecca Bates, Angela Arnold, Cary Komoto, Peggy Brickman, R. Alan Cheville, Elizabeth Longley, Jose Mestre, Mihaela Sabin, James Warnock

Integrated Engineering Department Publications

A gathering of science, technology, engineering, and math (STEM) higher education stakeholders met in November 2018 to consider the relationship between innovation in education and assessment. When we talk about assessment in higher education, it is inextricably linked to both evaluation and accreditation, so all three were considered. The first question we asked was can we build a nation of learners? This starts with considering the student, first and foremost. As educators, this is a foundation of our exploration and makes our values transparent. As educators, how do we know we are having an impact? As members and implementers of …

Report From The Stem 2026 Workshop On Assessment, Evaluation, And Accreditation, Rebecca Bates, Angela Arnold, Cary Komoto, Peggy Brickman, R. Alan Cheville, Elizabeth Longley, Jose Mestre, Mihaela Sabin, James Warnock

Reports

A gathering of science, technology, engineering, and math (STEM) higher education stakeholders met in November 2018 to consider the relationship between innovation in education and assessment. When we talk about assessment in higher education, it is inextricably linked to both evaluation and accreditation, so all three were considered. The first question we asked was can we build a nation of learners? This starts with considering the student, first and foremost. As educators, this is a foundation of our exploration and makes our values transparent. As educators, how do we know we are having an impact? As members and implementers of …

Science Through Art: Motivating Gifted And Talented Students, Ksenia Zhbanova

Journal of STEM Arts, Crafts, and Constructions

Gifted and talented students have unique characteristics and needs. Arts Integration is an effective differentiation strategy that helps meeting these students’ needs. STEM subjects are easily and organically integrated with the Arts because scientific and artistic inquiry are very similar. This practical article describes an arts-integrated project that provided the gifted and talented participants with an increased level of challenge, an opportunity for self-expression and for building social skills, amplified motivation, and a chance to deepen and demonstrate their knowledge of science, technology, engineering, mathematics, social studies and English Language Arts. In this project, identified gifted students completed figural transformations …

Incorporating Diegetic Elements To Increase Engagement In Games For Engineering Education, Katherine Smith, Yuzhong Shen, Anthony W. Dean

VMASC Publications

One of the difficulties in developing educational games is maintaining player engagement. This engagement is critical for games to provide effective learning experiences. One way to increase engagement in games is to limit interruptions during game play. In educational games, this can be accomplished by incorporating learning or problem-solving elements diegetically. Diegetic elements are those that are part of the game scene. With this in mind, a series of games for Science, Technology, Engineering, and Mathematics (STEM) education has been developed focusing on content in courses that are prerequisites to the engineering curriculum. These games cover topics in pre-calculus, calculus, …

How The Arts Standards Support Stem Concepts: A Journey From Stem To Steam, Ksenia S. Zhbanova

Journal of STEM Arts, Crafts, and Constructions

This issue of the Journal of STEM Arts, Crafts, and Constructions is focused on the effects of integrating arts with STEM areas, an important and widely-considered topic in education today. This editorial provides an overview of the current state of the arts and STEM areas integration paradigm, an analysis of the benefits of the arts integration with the STEM subjects, and an overview of the history of the arts anchor standards. Comparison and connections between the National Arts Core anchor arts standards, the scientific method, engineering design process, and the 5E learning cycle are also illuminated. Summaries of the practical …

Integrated Stem Through Tumblewing Gliders, Scott R. Bartholomew

Faculty Publications

Teachers have the opportunity to use technology and engineering design problems to engage students in integrated STEM education. “Tumblewing” gliders are easy-to-make paper gliders that can challenge, excite, and engage students. As students emphasize the practices of science and engineering while completing a tumblewing design challenge, they will engage in both scientific inquiry and the engineering design process.

Impacts Of Effective Temperature On Sectional View Drawing Ability And Implications For Engineering And Technology Education Students, Petros J. Katsioloudis

STEMPS Faculty Publications

Temperature can influence thermal comfort, working performance, and social behavior. In a classroom that is slightly cool, an assumption can be made that learning could be affected in a negative way. Considering this, a quasi-experimental study was done to determine if a significant difference of effective temperature have an effect on students’: a) spatial visualization ability, as measured by the MCT and b) ability to sketch a sectional view drawing. While not statistically significant, the students who received treatment using warm water outperformed their peers who received treatment using cold and hot water temperatures, respectively.

Unite 3d Rover Summer Workshop: An Overview And Assessment, Steve C. Hsiung, Walter F. Deal, Francis Tuluri

Engineering Technology Faculty Publications

The article offers information about UNITE, a program sponsored by the U.S. Army Educational Outreach Program (AEOP, 2015). It mentions that the STEM Enrichment Activities of AEOP are designed to spark student interest in science, technology, engineering, and mathematics (STEM) especially among the underserved and those in earlier grades and educators by providing exciting, engaging, interactive, hands-on STEM experiences (USAEOP).

Art-Integration Through Making Dioramas Of Women Mathematicians’ Lives Enhances Creativity And Motivation, Audrey C. Rule, Dana L. Atwood-Blaine, Clayton M. Edwards, Mindy M. Gordon

Journal of STEM Arts, Crafts, and Constructions

Creativity is essential for solving problems in the workplace, natural environment, and everyday life, necessitating that creativity be nurtured in schools. Identification of factors that intrinsically motivate students to learn difficult or initially unappealing content is also important. This project, in which 24 racially diverse fifth grade girls created dioramas of the lives of diverse successful women mathematicians, explored the girls’ reactions to art integration into mathematics through a phenomenological qualitative analysis of their products, essays, and responses to questionnaires. The project supported the Next Generation Science Standard for engineering design, Standard 3-5-ETS1-1 and two National Core Arts Standards for …

Three- And Four-Year Olds Learn About Gears Through Arts Incorporation, Dessy Stoycheva, Leann M. Perkins

Journal of STEM Arts, Crafts, and Constructions

This research paper explores art integration into a science lesson unit that follows the Next Generation Science Standards (K-PS2-1) and focuses on the effects on memory retention of key concepts along with levels of enjoyment. An experiment was conducted with children ages 3 and 4 teaching scientific concepts about gears while incorporating student-made art products. The children were assigned to alternating experimental (art-integrated) or control (no art) conditions during the four stages of the lesson. The results did not show statistically significant differences at the alpha = 0.05 level between conditions in the amount of information retained based on the …