Engineering Education Commons^™

How Engineering Technology Students Perceive Mathematics, Meher R. Taleyarkhan, Anne M. Lucietto, Therese M. Azevedo

School of Engineering Technology Faculty Publications

Engineering Technology (ET) is often combined with that of Engineering. Although Engineering Technology is based on a more hands-on approach and Engineering a theoretical approach, the two majors share a very similar pedagogy in teaching students the same engineering and scientific principles. An observation by an ET professor found that ET students more often than not would eschew the use of mathematical computations and instead provide answers they believe to be correct, without computation or explanation. Leading researchers to delve into possible reasons as to why ET students are reluctant to utilize mathematics. This study utilized in-person interviews with 15 …

Integrating Online Discussions Into Engineering Curriculum To Endorse Interdisciplinary Viewpoints, Promote Authentic Learning, And Improve Information Literacy, Lisa Bosman, Kurt Paterson, Margaret Phillips

Libraries Faculty and Staff Scholarship and Research

Engineering is very much an applied discipline where math and science concepts, skills, and tools can be used to design products or processes with new and/or increased value. Research suggests active learning is an effective method for teaching and learning in the engineering classroom. Moreover, students continue to express increased satisfaction when taught using this experiential pedagogical approach. One approach to active learning gaining traction in the engineering classroom is the use of online discussions. The purpose of this paper is to offer a structured approach for engineering educators to develop online discussion prompts aimed to prepare engineering students for …

Integrating The Entrepreneurial Mindset Into The Engineering Classroom, Lisa Bosman, Margaret Phillips

Libraries Faculty and Staff Scholarship and Research

CONTRIBUTION: This paper highlights one approach to fostering the entrepreneurial mindset in the engineering classroom. BACKGROUND: Entrepreneurship and innovation are currently trending topics in engineering education and will continue developing for the foreseeable future. INTENDED OUTCOMES: The guiding research question is: How can an entrepreneurial mindset focused learning experience improve student self-regulation, seeing value, and lifelong learning through metacognitive reflections? APPLICATION DESIGN: The study is implemented within a five-week module focused on developing the entrepreneurial mindset as part of a required course on supply chain management technology. The supporting pedagogical interventions include authentic learning, information literacy, a mix of low …

Preface And Acknowledgments, William S. Walker Iii, Lynn A. Bryan, Siddika Selcen Guzey, Elizabeth Suazo-Flores

Indiana STEM Education Conference

No abstract provided.

Contents, William S. Walker Iii, Lynn A. Bryan, Siddika Selcen Guzey, Elizabeth Suazo-Flores

Indiana STEM Education Conference

No abstract provided.

How Does An Integrated Stem Life Sciences Unit Affect Middle School Students' Engagement And Science Content Knowledge?, Zeynep Gonca Akdemir, Muhsin Menekse, Saira Anwar, Siddika Selcen Guzey

Indiana STEM Education Conference

This study explored the effect of an integrated engineering design-based life sciences unit on middle school students' engagement and science content knowledge, and the role of engagement in predicting their success. Participants were 530 seventh-grade students from rural schools in the Midwest region of the United States. Data included science content pre- and post-assessments and a multidimensional engagement survey. The data were analyzed by conducting paired-sample t-tests and multiple regression analysis. Results indicated that students' social engagement increased when they engaged in an integrated engineering design-based life science curriculum unit. Also, students’ pre-assessment scores were found to be the …

Goals And Proceedings Information, William S. Walker Iii, Lynn A. Bryan, Siddika Selcen Guzey, Elizabeth Suazo-Flores

Indiana STEM Education Conference

No abstract provided.

Development Of A Situational Judgement Test And An Assessment Of Its Efficacy As A Stimulus Of Metacognitive Behaviour In Engineering Students, Darren Carthy

Doctoral

Metacognition entails the conscious evaluation and control of one's cognitive processes. This meta-level control of cognitive process is not essential for all activities, but in the domain of problem solving and the development of new expertise, conscious control of mental functioning is essential to success. Previous studies have shown a relationship between metacognitive knowledge & skills and student self-regulated learning, self-efficacy and more generally, with success in academic and non-academic endeavours; they represent critical skills for an aspiring engineer to possess for their future employability. Metacognition can be stimulated by allowing students to engage and reflect on the problem-solving process. …

Development Of An Undergraduate Welding Laboratory For Research And Education, Hamid Eisazadeh, Alok K. Verma

Engineering Technology Faculty Publications

The shortage of welders in Hampton Roads area, where many shipyards are located, is becoming severe for shipbuilding in coming years. Many welding engineers graduated from universities located out of state, tend to go back to companies near their home, after receiving couple years of welding experience at Hampton Roads shipyards. Therefore, it is critical to train local welders. In order to address the welding workforce needs of Hampton Roads, the Department of Engineering Technology at Old Dominion University has recently launched an initiative for developing a laboratory for welding processes (LWP) for supporting educational and research activities in its …

Pedagogical Methods And Advances For Synchronous/Asynchronous Instruction Of Laboratories In Engineering Technology Programs, Nestor Escobales, Alok Verma

Engineering Technology Faculty Publications

Significant research has been done on the subject of distance learning (DL) instruction for many academic disciplines. However, when it comes to engineering technology (ET) programs, particularly, engineering laboratory work, limited studies are available. It is unquestionable that engineering laboratory work is essential for the successful preparation of individuals enrolled in ET programs. The focus of ET programs is on the correct use and application of engineering principles with a direct focus on practical application rather than on theory alone. The difficulties increase significantly when laboratories are offered in DL mode, particularly for ET programs. It is well known that …

Engineering Technology Programs Outreach To K-12, Alok Verma

Engineering Technology Faculty Publications

The Engineering Technology (ET) degree emphasizes hands-on application and implementation. Graduates holding this degree play a valuable role in economically growing the US and keeping it internationally competitive. However, “engineering and engineering technology, are widely misunderstood… the public sector (employers, students, high-school counselors, politicians and the general public) needs to be educated as to the particular value of each,” according to Engineering.com [1]. The National Academy of Engineering states, “Unlike the much better-known field of engineering, engineering technology is unfamiliar to most Americans and goes unmentioned in most policy discussions about the US technical workforce. This is even though workers …

Mentoring Prospective Engineering Students Through The After School Program "Girls In Engineering" Focused On Building An Underwater Remotely Operated Vehicle, Vukica M. Jovanović, Deborah Marshall, Jeff Warren Larson Jr., Abdul Rahman Badawi, Neil R. Stclair, Otilia Popescu, Murat Kuzlu, Petros J. Katsioloudis, Linda Vahala, Michael Anthony Crespo

Engineering Technology Faculty Publications

A number of studies by engineering education researchers have pointed out that all-female teams, rather than mixed teams, result in better forms of participation and interaction in engineering related after-school programs and clubs. In particular, for after-school programs or clubs that form in response to a STEM competition, all-female teams have better chances of developing. One such competition, which will be discussed in this paper, is a regional Marine Advanced Technology Education (MATE) competition in which students from Blind_Review High School have been participating for many years.For each year’s competition, an all-female team of students enrolled in the Career and …

Flipping The Classroom For Introduction To Probability And Statistics For Engineers, Philomena Krosmico

Graduate Theses, Dissertations, and Problem Reports (ETD)

Introduction to Probability and Statistics for Engineers, IENG 213, is a foundational course in the Industrial Engineering curriculum at West Virginia University (WVU). The challenge has been finding the best teaching method to instill concept learning. A “flipped classroom” teaching style has been gaining momentum throughout higher education and has had proven success in STEM fields. At WVU, beginning with the 2016 Fall semester, the teaching model for the class used a flipped classroom style for one of the instructors. Data on statistical concept learning, using the University of Oklahoma validated statistics concept inventory instrument (Allen K., 2006), was collected …

Facilitating Veteran And Adult Students' Learning And Retention In Engineering: Faculty-Student Partnership - A Model Of An Evidence-Based Practice, Kim E. Bullington, Anthony Dean, Cynthia Tomovic, Vukica M. Jovanović, Rafael E. Landaeta

Engineering Technology Faculty Publications

With the growing number of adult and military veterans entering higher education, it is important to understand and incorporate the basics of andragogy in curriculum, course development, and the learning environment to facilitate learning and degree completion. Researchers in this S-STEM project funded by the NSF share observations of a student-faculty partnership that resulted from the development of a formal learning community. A series of targeted seminars were conducted that appear to have increased adult and military veteran engineering and technology students’ levels of connectedness and self-efficacy. Results of this pilot study are shared as an evidence-based practice to enhance …

Integration Of Robotic And Electro-Pneumatic Systems Using Advanced Control And Communication Schemes, Chinmay Kondekar

Dissertations, Master's Theses and Master's Reports

Modern industrial automation systems are designed by interconnecting various subsystems which work together to perform a process. The thesis project aims to integrate fragmented subsystems into a flexible and reconfigurable system through advanced communication protocols and perform a process to demonstrate the effectiveness of interconnected systems.

The system consists of three six-axis robots, one electro-pneumatic robot, and two conveyors connected using EthernetIP communication and hardwired connections. The interconnected system works together to perform machining of a workpiece using advanced control methods of CAD to robot path generation, central control through a PLC, and process control through HMI.

Standardized programming blocks …

Pengembangan E-Learning Berbasis Website Menggunakan Metode Waterfall, Kukuh Septyanto, Mustofa Abi Hamid, Didik Aribowo

Elinvo (Electronics, Informatics, and Vocational Education)

Perkembangan informasi, komunikasi dan teknologi yang semakin pesat telah banyak mengubah berbagai bidang kehidupan, termasuk dibidang pendidikan. Sudah semestinya sistem pembelajaran yang ada di Program Studi Pendidikan Vokasional Teknik Elektro Untirta harus lebih inovatif. Mengembangkan sistem pembelajaran e-learning berbasis website dan mengetahui kelayakan produk yang dihasilkan merupakan tujuan dari penelitian ini, dengan memakai metode Research and Development (R&D) dengan model pengembangan waterfall yang terdiri dari beberapa tahapan yaitu, analisis kebutuhan, desain, implementasi atau pengkodeaan, dan pengujian. Subjek pada penelitian ini adalah 3 orang ahli produk, 3 dosen 1 staff, dan 51 mahasiswa. Maka didapatkan hasil penelitian yang telah diolah, berupa …

Sistem K3 Pada Pembelajaran Praktik Di Prodi Pendidikan Teknik Elektronika Fakultas Teknik Uny, Satriyo Agung Dewanto, Muhammad Munir, Bekti Wulandari

Elinvo (Electronics, Informatics, and Vocational Education)

Keselamatan dan kesehatan kerja (K3) merupakan bagian yang sangat penting dari kegiatan pembelajaran praktik di lembaga pendidikan. Kegiatan selama ini telah berlangsung dengan rutin dan baik, tetapi terdapat beberapa faktor keselamatan dan kesehatan kerja yang seharusnya lebih diutamakan. Penelitian ini bertujuan untuk mengetahui pengetahuan mahasiswa Prodi Pendidikan Teknik Elektronika FT UNY tentang K3 pada pembelajaran praktik. Jenis penelitian ini adalah penelitian kuantitatif yang bersifat non-eksperimental dengan metode pendekatan deskriptif. Penelitian ini dilaksanakan di Prodi Pendidikan Teknik Elektronika Fakultas Teknik UNY pada bulan Februari sampai Juni 2018.Tingkat pengetahuan mahasiswa mengenai K3 pada pembelajaran praktik di Prodi Pendidikan Teknik Elektronika sudah baik. …

Trainer Kit Pneumatik Sebagai Media Pembelajaran Pada Mata Kuliah Mekatronika Di Program Studi Pendidikan Vokasional Teknik Elektro Untirta, Yohanes Aldi Prapaskah, Endi Permata, Mohammad Fatkhurrokhman

Elinvo (Electronics, Informatics, and Vocational Education)

The research is a research and development (R&D) with the aim to produce learning media products in the form of pneumatic trainer kits and pneumatic jobsheet trainers as pneumatic material in mechatronics courses to determine the level of eligibility and strengthening of competencies in Vocational Education in Electrical Engineering FKIP Untirta. This study uses the 4D or Defne model, namely the problem definition stage to be investigated, Design which is the product design stage and the material design josbheet material, Development (Development), namely the product manufacturing stage, product validation as well as user testing with competency strengthening and Dessiminate. The …

The Assessments Of Internet-Based Technology Use By University Academic Members, Mohammed Alghamdi

BAU Journal - Science and Technology

Social networking applications (SNAs), as technologies that rely on internet infrastructure, are widely used as platforms for user interaction, content creation and social communication. However, in recent years, SNAs have been used in the context of teaching and learning, and this aspect, as well as others, has attracted research attention. Limited research has investigated the motivations and barriers to teaching with SNAs in higher education, and so this study sought to examine the purposes, motivations and barriers associated with SNA use in education among academic members at Albaha University, Saudi Arabia. A quantitative research design involving a sample of academic …

Solar Photovoltaic Performance Monitoring: A Bibliometric Review, Research Gaps And Opportunities, Javed Sayyad, Paresh Nasikkar

Library Philosophy and Practice (e-journal)

Electrical power generation has been revolutionized by growing demand and use of Renewable Energy (RE) sources such as Solar Photovoltaic (SPV) as the main electricity source in modern times. The main objective of this bibliometric analysis is to understand the scope of the literature available for SPV performance characterization. This detailed reviewed was performed on the documents related to SPV research considering all the subject categories from Scopus and Web of Science (WoS) databases. The patterns for the particular set of keywords were broke down with the recuperated outcomes from Scopus database in the language, publication type, year of publication, …

Technology Criticism And Data Literacy: The Case For An Augmented Understanding Of Media Literacy, Thomas Knaus

Journal of Media Literacy Education

Reviewing the history of media literacy education might help us to identify how creating media as an approach can contribute to fostering knowledge, understanding technical issues, and to establishing a critical attitude towards technology and data. In a society where digital devices and services are omnipresent and decisions are increasingly based on data, critical analysis must penetrate beyond the “outer shell” of machines – their interfaces – through the technology itself, and the data, and algorithms, which make these devices and services function. Because technology and data constitute the basis of all communication and collaboration, media literate individuals …

Environmental Hygiene For Covid-19: It's All About The Mask, Daniel B. Oerther, Mona Shattell

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Transfer Of Learning For K-12 Stem Teachers: From The Gear Up Engineering Camp Professional Learning Experience To The Classroom, Ryan F. Barlow

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Because of the new Utah Science with Engineering Education (SEEd) standards, which are based on the Next Generation Science Standards (NGSS), Utah science teachers in K-12 schools are now being asked to incorporate engineering into their science classes. Many science teachers in the State of Utah do not have a background in engineering and have not received training in how to incorporate engineering into their classes. To help remedy this problem, six STEM teachers from the State of Utah, and one STEM teacher from Nevada, came to the campus of Utah State University in July 2019 to participate with a …

Identifying The Need For Trained Machinists In The Greater Tri-Cities Area, Bradley Stufflestreet

Electronic Theses and Dissertations

Machinists are skilled tradespeople responsible for running a variety of machine tools to produce precision components for end-users or use in other manufacturing. This project identifies the current and future change in the number of machinists in the Tri-Cities area, especially the five-county service area of Northeast State Community College. Using an industry survey, the need for machinists is identified and evaluated to understand local employers’ needs. The results indicate industry needs more machinist to keep up with demand, as 6 out of 14 companies have open positions and, 8 reported difficulty filling openings. Furthermore, most companies are growing or …

Comparison Of Pre-Intervention Idi Results From Stem And Non-Stem Undergraduate Students, Anne M. Lucietto, Liza Russell

Journal of Global Education and Research

The emphasis on intercultural competence is more prevalent in STEM (Science, Technology, Engineering and Mathematics) majors as the world shifts towards a more globalized economy. When entering higher education, students have differing levels of cultural interaction due to varying peer interaction, family experiences, international travel, and social media experiences. The Intercultural Development Inventory (IDI) has been used to develop an understanding of how students view others and the level of skills they have to interact and adapt to other cultures. Using published data focused on pre-intervention assessment, researchers compared it to data obtained from STEM students preparing for an international …

"You Can Tell They Care": A Phenomenographic Study Of Student Experiences With Empathic Concern Expressed By Professors In Engineering, Kate Youmans

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In order to address the increasingly complex challenges of the 21st century, there is a need to continue to grow the technical workforce by improving graduation rates of engineering students. To accomplish this, the culture of engineering programs must shift from demanding or intimidating to more inclusive and supportive. Professors can play a critical role in creating these cultures by building relationships with students. Empathic concern is essential in building relationships that can encourage student growth and development. This form of empathy, sometimes referred to as care or concern, is expressed through actions of understanding, compassion, and non-judgement. While research …

Systems Thinking In Engineering Design: Differences In Expert Vs. Novice And Relationship To Personality Traits, Yuzhen Luo

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Systems thinking is the ability to see the big picture and the related elements when designing, and how these relationships form the big picture. In engineering design, systems thinking is valuable to both industry, as well as engineering education. As such, it creates opportunities for researchers to better understand systems thinking of both professional engineers in industry, who are assumed to be the experts, and engineering students in higher education, who are assumed to be the novices. The purpose of this study was to compare and identify the differences between expert and novice systems thinking in engineering design. Additionally, the …

Nature Of Problem-Solving Skills For 21st Century Stem Learners: What Teachers Need To Know, Paul Nnanyereugo Iwuanyanwu

Journal of STEM Teacher Education

Since the emergence of the fourth industrial revolution which calls for a new model of learning for the twenty-first century learners, it has been argued that the nature of problems that learners must solve in science, technology, engineering and mathematics (STEM) must also be transformed to enable new forms of learning skills that are needed to tackle complex global challenges. However, the question of how best to teach these skills purposefully and explicitly is largely overlooked. STEM education reformers recognize that the lecture method or traditional method of teaching is highly ineffective for teaching twenty-first century competencies and skills that …

Standards For Technological And Engineering Literacy: Addressing Trends And Issues Facing Technology And Engineering Education, Johnny J. Moye, Philip A. Reed

STEMPS Faculty Publications

The article offers information on addressing trends and issues facing technology and engineering education. It mentions future challenges, students need to "have a broad conceptual understanding of technology and its place in society, enabling them to be active participants in the technological world and careful creators and users of technology.

Students Becoming Supervisors: Student Transformation During A Cross-National, Collaborative Community Engineering Project, Alessandra Napoli, Kevin Nyaga, Dhinesh Radhakrishnan, Jennifer J. Deboer

Purdue Journal of Service-Learning and International Engagement

The Tumaini Innovation Center in Eldoret, Kenya, is an alternative primary and vocational school for former "street youth." The DeBoer Lab at Purdue has partnered with Tumaini for the last five years to develop and support integrated engineering activities for the students, which apply their learning to solve problems in their own communities. A Purdue Service Learning Grant project started in November 2018 resulted in the construction of a community gym at Tumaini. A low-cost custom made gym was designed by a team of doctoral and undergraduate students at Purdue in collaboration with Tumaini. In addition to the design and …