Electrical and Computer Engineering Commons^™

System Strength Shortfall Challenges For Renewable Energy-Based Power Systems: A Review, Md O. Qays, Iftekhar Ahmad, Daryoush Habibi, Asma Aziz, Thair Mahmoud

Research outputs 2022 to 2026

Renewable energy sources such as wind farms and solar power plants are replacing conventional coal-based synchronous generators (SGs) to achieve net-zero carbon emissions worldwide. SGs play an important role in enhancing system strength in a power system to make it more stable during voltage/frequency disruptions. However, traditional coal-fired SGs are being decommissioned in many parts of the world, owing to stringent environmental regulations and low levelized cost of energy of renewables. Consequently, maintaining system strength in a renewable energy-dominated power system has become a major challenge, and without adequate mitigation techniques, low system strength can potentially cause widespread power outages. …

Open Source Framework For A Broadly Expandable And Reconfigurable Data Acquisition And Automation Device (Bread), Shane Oberloier, Nicholas G. Whisman, Finn Hafting, Joshua M. Pearce

Michigan Tech Publications

Though open source data acquisition (DAQ) systems have been published, closed source proprietary systems are the standard despite often being prohibitively expensive. High costs, however, limit access to high-quality DAQ in low-resource settings. In many cases the functions executed by the closed source and proprietary DAQ cards could be carried out by an open source alternative; however, as desired function count increases, the simplicity of integrating the designs decreases substantially. Although the global library of open source electronic designs is expanding rapidly, and there is clear evidence they can reduce costs for scientists one device at a time, they are …

Multifunctional Organic Monolayer-Based Coatings For Implantable Biosensors And Bioelectronic Devices: Review And Perspectives, Taral Patel, Jie Huang, Katarzyna Krukiewicz

Electrical and Computer Engineering Faculty Research & Creative Works

The Emerging Field of Biosensors and Bioelectronics Seeks to Exploit Biology in Combination with the Recent Advances in Engineering. Even Though Biomedical Implants Can Significantly Improve Quality of Life, Problems Following the Process of Implantation Are Still an Issue. in This Review, We Point Out Organic Monolayer-Based Coatings as a Potential Solution to the Major Limitations of Implantable Biomaterials, Including Limited Biocompatibility, the Risk of Biofouling, Bacterial Colonization, and Stability under in Vivo Conditions. at First, Selected Current and Perspective Biomaterials Are Discussed, with the Focus on their Use as Implantable Biosensors and Biomedical Electrodes. Surface Modification Strategies for Implantable …

In Situ Monitoring Of The Hydration Of Calcium Silicate Minerals In Cement With A Remote Fiber-Optic Raman Probe, Bohong Zhang, Wenyu Liao, Hongyan Ma, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

This study utilized a novel in situ fiber-optic Raman probe to continuously monitor the hydration progress of tricalcium silicate (C3S) and dicalcium silicate (C2S) without the need for sampling, from early hydration stage to later stages, and from fresh to hardened states of paste samples. by virtue of the remarkable ability of this technique in characterizing either dry or wet and crystalline or amorphous samples, the hydration processes of C3S and C2S pastes with different water-to-solid (w/s) ratios could be monitored from the start of the hydration reaction. the main hydration products, calcium silicate hydrate (C–S–H) and portlandite/calcium hydroxide (CH), …

Brdf Measurements And Physical Optics Modeling Applied To Anisotropic Satellite Solar Cells, Madilynn E. Compean

Theses and Dissertations

Light curve analysis is often used to discern information about satellites in geosynchronous orbits, and since solar panels comprise relatively large surface areas, their reflected energy can contribute greatly to observed light curves. Data was collected using a space qualified solar cell interrogated by a green HeNe laser. The data validated certain aspects from previous work, but also identified multi-slit behavior, showed that the specular term was a second diffraction pattern, and diagnosed the out-of-plane diffraction curvature as the conical diffraction phenomenon. Two physical-optics-based models were developed to incorporate these new features and better predict solar cell BRDF solely from …

Atmospheric Propagation Of Qubits: Laboratory Experiments To Field Demonstrations, Keith A. Wyman

Theses and Dissertations

Free-space quantum networks can enable global-scale quantum communication via satellite-based nodes and quantum ground transceivers. To enable building of robust global quantum networks, it is critical to learn how the state of the qubit is transformed while propagating through the atmosphere. With such an overarching goal, we built a laboratory based atmospheric turbulence simulator (ATS) to characterize the effects of atmospheric turbulence on an entangled pair of photons as a function of statistical quantities such as the Fried parameter or scintillation index for long-distance communication. Specifically, the changes in the statistical properties associated with a quantum source was investigated using …

Uncertainties In Retrieval Of Remote Sensing Reflectance From Ocean Color Satellite Observations, Eder I. Herrera Estrella

Dissertations, Theses, and Capstone Projects

Ocean Color radiometry uses remote sensing to interpret ocean dynamics by retrieving remote sensing reflectance (������) from satellite imagery at different scales and over different time periods. ������ spectrum characterizes the ocean color that we observe, and from which we can discern concentrations of chlorophyll, organic and inorganic particles, and carbon fluxes in the ocean and atmosphere. ������ is derived from the total radiance at the top of the atmosphere (TOA). However, it only represents up to ten percent of the total signal. Hence, the retrieval of ������ from the total radiance at TOA involves the application of atmospheric correction …

Optimally Distributed Receiver Placements Versus An Environmentally Aware Source: New England Shelf Break Acoustics Signals And Noise Experiment, William K. Stevens, Martin Siderius, Matthew J. Carrier, Drew Wendeborn

Electrical and Computer Engineering Faculty Publications and Presentations

This article describes the results of the Spring of 2021 New England Shelf Break Acoustics (NESBA) Signals and Noise experiment as they pertain to the optimization of a field of passive receivers versus an environmentally aware source with end-state goals. A discrete optimization has been designed and used to demonstrate providing an acoustic system operator with actionable guidance relating to optimally distributed receiver locations and depths and likely mean source detection times and associated uncertainties as a function of source and receiver levels of environmental awareness. The uncertainties considered here are those due to the imperfect spatial and temporal sensing …

Analysis Of Coronal Magnetic Field Parameters During X- And M-Class Solar Flares, Seth H. Garland

Theses and Dissertations

Using Non-Linear Force Free Field (NLFFF) extrapolation, 3D magnetic fields were modeled from the 12-minute cadence Helioseismic and Magnetic Imager (HMI) photospheric vector magnetograms, spanning a time period of one hour before through one hour after the start of 18 X-class flares and 12 M-class flares. Several magnetic field parameters were calculated from the modeled fields directly – as well as from the power spectrum of surface maps generated by summing the fields along the vertical axis – for two different regions: areas with photospheric Bz ≥ 300 G (Active Region – AR) and areas above the photosphere with the …

Exploring Topological Phonons In Different Length Scales: Microtubules And Acoustic Metamaterials, Ssu-Ying Chen

Dissertations

The topological concepts of electronic states have been extended to phononic systems, leading to the prediction of topological phonons in a variety of materials. These phonons play a crucial role in determining material properties such as thermal conductivity, thermoelectricity, superconductivity, and specific heat. The objective of this dissertation is to investigate the role of topological phonons at different length scales.

Firstly, the acoustic resonator properties of tubulin proteins, which form microtubules, will be explored The microtubule has been proposed as an analog of a topological phononic insulator due to its unique properties. One key characteristic of topological materials is the …

Boundary Integral Equation Methods For Superhydrophobic Flow And Integrated Photonics, Kosuke Sugita

Dissertations

This dissertation presents fast integral equation methods (FIEMs) for solving two important problems encountered in practical engineering applications.

The first problem involves the mixed boundary value problem in two-dimensional Stokes flow, which appears commonly in computational fluid mechanics. This problem is particularly relevant to the design of microfluidic devices, especially those involving superhydrophobic (SH) flows over surfaces made of composite solid materials with alternating solid portions, grooves, or air pockets, leading to enhanced slip.

The second problem addresses waveguide devices in two dimensions, governed by the Helmholtz equation with Dirichlet conditions imposed on the boundary. This problem serves as a …

On Explainability Of Neural Networks, Cem Benar

Dissertations

It is widely reported that deep neural networks outperform most competitors for a range of applications. The state-of-the-art neural networks have built-in inductive bias of architectural choices, regularizations, optimizer types, and initialization methods. Using inductive bias is intuitive to enhance the model approximation. Deep neural networks are mostly dense and heavily overparameterized. They tend to be biased towards low-rank solutions to reduce complexity and improve generalization performance, known as implicit regularization. The implicit regularization as observed in specific architectures and various real-world data sets suggests to overparameterize neural networks judiciously and learn compressed representations (lower rank approximation) with improved performance. …

Use Of Neural Networks In Intelligent Measurement Tools, N.R Yusupbekov, Y.Sh. Avazov, Umidjon Ruziev Phd

Chemical Technology, Control and Management

The paper presents algorithms for processing the measurement signal with the possibilities of adaptation, learning and decision making. A comparative analysis of the methods of intellectual processing of measurement data is carried out. A model of a measuring instrument for determining the structure of a neural network has been developed. The problem of error reduction due to measurement noise filtering with the use of neural networks is considered. The structure of the neural network has been developed for intelligent processing of the measurement signal and ensuring the implementation of the functions of reconfiguration, calibration, self-diagnosis and self-control. A neural network …

Algorithms For Synthesis Of Adaptive Control Systems Based On The Neural Network Approach, Jasur Sevinov, Oxunjon Boborayimov, Sh.M. Abdishukurov

Chemical Technology, Control and Management

Here are algorithms for the synthesis of adaptive control systems based on the neural network approach presented. The issues of choice of architectures of neural networks that produce parametric identification of the object regulation. Adaptative neural networks that reproduce the optimal parameters of implemented controllers, methods of forming training samples for their training are considered. The other question of using the theory of artificial neural networks for approximating the functional of the controller's tuning parameters are determined. Structures of synthesized neural networks of parametric identification of objects with self-alignment in an open loop ACS are proposed. Algorithms made it possible …

Results Of The Study Of The Pumpkin Drying Process, Jasur Esirgapovich Safarov, Shahnoza Abduvakhitovna Sultanova, Andrey Svyatoslavovich Ponasenko, Gani Toshkhujaevich Dadaev

Chemical Technology, Control and Management

The article presents the results of the study of the pumpkin drying process, comparisons with different drying models are carried out. A mathematical model for numerical analysis has been developed. Pumpkin drying rates are calculated and various drying models are investigated. 5 different drying models were used to verify the accuracy of experimental data and search for the most suitable model. The experimental data obtained for the drying air temperature of 45 °C, 55 °C and 65 °C were applied to various drying models.

Electromagnetic Current Transducer For Control Of Reactive Power Consumption Of An Asynchronous Motor From A Single-Phase Supply Of Renewable Energy Source, Llhomjon Xakimovich Siddikov, Saidikrom Saidmurodovich A'Zamov, Dilyorbek Doniyorbek O'G'Li Karimjonov

Chemical Technology, Control and Management

In the world, the demand for electricity and its quality is increasing, in order to further increase the share of renewable energy sources, the reactive power that generates the magnetic field and current in asynchronous motors, which consumes more than 60% of the electricity generated from them and provided by them The research of electromagnetic current transformers, which allows controlling the consumption, evaluating the asymmetry and nonsinusoidal indicators of reactive power and energy, remotely sensing and measuring these quantities with appropriate devices, and converting them into a standard signal, is considered an urgent issue . The research results of the …

Systematic Analysis Of Methods Of Control Of Dynamic Objects In Conditions Of Non-Measurable Disturbances, Mamirov Farkhodovich Uktam, Buronov Mamurjon Ugli Bunyod

Chemical Technology, Control and Management

The article presents a systematic analysis of control methods of dynamic objects under non-measurable disturbances. It is important to study all the factors affecting the control object in order to increase the efficiency of the control system. Due to the immeasurable nature of disturbances affecting control objects, it is shown that they cause negative effects and increase the complexity of control systems in this case. In the control of dynamic objects of this type, the possibilities of control by indirect measurement of disturbances or by estimation of object position and disturbances have been explored. The use cases, shortcomings and achievements …

Development Of The Computer Model Of The Waste Water Treatment Process Using Ion-Exchange Resins In The Matlab Program, Jaloliddin Abdurazzakovich Eshbobaev, Bakhodir Tajiddinovich Khamidov, Adham Tilovovich Norkobilov, Orifjon Sharipovich Kodirov

Chemical Technology, Control and Management

In this work, a mathematical model of industrial wastewater treatment technology was formed. First, wastewater treatment technologies were analyzed and the technology of ion-exchange resin treatment was selected. A water purification device using ion-exchange resins was made, and tested on the Kungrad soda plant and the results were obtained. According to these results, it was determined that the cleaning coefficient of the device is up to 98-99%. In this article, a mathematical model of a wastewater treatment device using ion-exchange resins was developed using the stoichiometric matrix method. After the mathematical model of the process was found, a graph of …

The Morphology Analysis Of Soil In Remote Sensing Image Processing, Mirzayan Mirzaaxmedovich Kamilov, Mirzaakbar Xakkulmirzayevich Hudayberdiev, Bobomurod Mamitjonovich Tojiboev

Chemical Technology, Control and Management

This article analyzed various techniques used in satellite image processing to analyze soil morphology. Analysis of soil morphology using satellite imagery plays a crucial role in soil science research, Land Management, and environmental monitoring. It provides an economical and efficient means of studying large-scale soil variability, providing information on land sustainable use, resource management and soil conservation decisions.

Computer Training Systems For Training Engineering Personnel For Control Industrial Enterprises, Yusuf Shodiyevich Avazov, Kamola Rustamovna Abdullaeva

Chemical Technology, Control and Management

A principle has been proposed for constructing computer simulators for improving the qualifications of process control operators at industrial enterprises and for training students of higher educational institutions. The capabilities of a computer simulator that can be used as a digital assistant are revealed. Their architecture for building digital simulators is proposed. From the architecture it is clear that the computer simulator consists of two systems. The training process management system and the server of the computerized simulator are combined into a digital simulator. Simulators in this category provide student operators with the opportunity to develop skills in self-control of …

Obtaining Sweet Molasses By The Method Of Hydromechanical And Enzymatic Processing Of Grain, Sadritdin Maxamatdinovich Turabdjanov, Kamoliddin Ahmadjonovich Mahmudov, Bexzod Alisherovich Kasimov, Kasun Dissanayake Kumara

Chemical Technology, Control and Management

Methods of hydrolysis of grains to starch under the influence of hydrodynamic and enzymatic processes are logically based. Polysaccharides derived from starchy grains are known and popular in the food industry for their thickening and stabilizing properties. To date, studies that allow for a deeper understanding of the mechanism of interaction of polysaccharide-containing products with their main components, the effect on the set of rheological, organoleptic, physico-chemical properties of food products that determine their functions are relevant.

Mathematical Model Of An Industrial Robot Built On The Basis Of Linear Motion Mechatron Modules, Matyokubov Nurbek Rustamovich, Rakhimov Temurbek Omonboyevich

Chemical Technology, Control and Management

The use of Industry 4.0 technologies in modern production serves to increase production efficiency. Robots and robotic complexes with innovative intelligent control are widely used in industrial production. However, studying their mechanical part, linear motion mechatronic modules and control system is a complex object. The variety and complexity of control methods and operating modes negatively affects the operator's working time and production productivity. In such cases, it is necessary to improve control methods and develop technologies used in industry, including robots and robotic manipulators, which allow to perform short movements with high accuracy and speed. In the article, the mathematical …

Application Of Evolutionary Algorithms For Optimization Of Operation Modes Of Regional Electric Power Systems, Isamiddin Khakimovich Siddikov, Oksana Vitalevna Porubay

Chemical Technology, Control and Management

The paper presents the possibilities of using evolutionary algorithms to solve the problem of optimizing the operation modes of electric power facilities in the presence of constraints in the form of inequalities and equalities. The limits of constraints have a variable character, depending on the generated and consumed energy. Existing methods used for the optimization of modes are based on general principles and approaches to optimization, which usually adapt to the specifics of the problem. In electric power facilities, optimization problems have some peculiarities, among which is the presence of multiple constraints applied to both independent and dependent variables. Many …

Challenges In Optimization For The Performance On Sustainability Dimensions In Reverse Logistics Social Responsibility, Sumarsono Sudarto, Katsuhiko Takahashi, Mochammad Dewo

Makara Journal of Technology

Reverse logistics social responsibility is preferred as the most acceptable solution for addressing the challenges in stakeholders’ debate regarding social responsibility in supply chains because it involves as many actors as possible in the supply chain to perform social responsibility to achieve sustainability. This paper explores the challenges in achieving optimal policies in sustainability dimensions for collection and recycling facilities in reverse logistics. Sustainability dimensions include economic, environmental, and social aspects. The reverse logistics is modeled on System Dynamics, and a simplified statistical analysis using a contour chart is employed in numerical experiments. Results show a narrow area of optimal …

An Animated Introduction To Digital Logic Design, John D. Carpinelli

Open and Affordable Textbooks

There is a newer edition of this textbook available here.

This book is designed for use in an introductory course on digital logic design, typically offered in computer engineering, electrical engineering, computer science, and other related programs. Such a course is usually offered at the sophomore level. This book makes extensive use of animation to illustrate the flow of data within a digital system and to step through some of the procedures used to design and optimize digital circuits.

All of the animations for this book can be found here: https://digitalcommons.njit.edu/dld-animations/

The Relaying Network In Free-Space Optical Communications Using Optical Amplifiers In Cascaded Configuration, Ucuk Darusalam, Arockia Bazil Raj, Fitri Yuli Zulkifli, Purnomo Sidi Priambodo, Eko Tjipto Rahardjo

Makara Journal of Technology

Optical relaying is the best technique to implement free-space optical (FSO) communications as a terrestrial platform. However, atmospheric turbulence (AT) limits the optical-propagation path length. In this study, the implementation of some optical amplifiers (OAs) in cascaded configuration, namely, erbium-doped fiber amplifiers, semiconductor OAs, and Raman amplifiers (RAs), are investigated through simulation. This study aims to search for the maximum link distance of an optical propagation and enhance the FSO performance caused by each configuration of OAs. The optical relaying network consists of three nodes, with each node designed with a space of several kilometers under the influence of AT. …

Large-Scale Cascading Of First-Order Fbg Array In A Highly Multimode Coreless Fiber Using Femtosecond Laser For Distributed Thermal Sensing, Farhan Mumtaz, Bohong Zhang, Ronald J. O'Malley, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

This research focuses on the performance analysis and characterization of a fiber Bragg gratings (FBGs) array, consisting of 10 first order FBGs inscribed by a femtosecond (FS) laser in a highly multimode coreless fiber. The study evaluates the FBG array's ability to function as a distributed thermal sensing (DTS) platform, with the coreless fiber chosen as the sensing element due to its immunity to dopant migration at high temperatures. The design of a large cascaded first-order FBG array effectively eliminates unwanted harmonic peaks across a wide spectrum range. In contrast, higher-order FBGs introduce limitations due to the overlapping of Bragg …

Synthesis And Evaluation Of Organic Additives For Copper Electroplating Of Interconnects, Yue-Hui Zhai, Yi-Xiao Peng, Yan Hong, Yuan-Ming Chen, Guo-Yun Zhou, Wei He, Peng-Ju Wang, Xian-Ming Chen, Chong Wang

Journal of Electrochemistry

Copper interconnects are essential to the functionality, performance, power efficiency, reliability, and fabrication yield of electronic devices. They are widely found in chips, packaging substrates and printed circuit boards, and are often produced by copper electroplating in an acidic aqueous solution. Organic additives play a decisive role in regulating copper deposition to fill microgrooves, and micro-vias to form fine lines and interlayer interconnects. Generally, an additive package consists of three components (brightener, suppressor, and leveler), which have a synergistic effect of super-filling on electroplating copper when the concentration ratio is appropriate. Many works of literature have discussed the mechanism of …

Effect Of Amine Additives On Thermal Runaway Inhibition Of Sic||Ncm811 Batteries, Bo-Wen Hou, Long He, Xu-Ning Feng, Wei-Feng Zhang, Li Wang, Xiang-Ming He

Journal of Electrochemistry

The high energy density of NCM batteries with high nickel content is a key advantage in replacing fossil fuels and promoting clean energy development, at the same time, is also a fundamental cause of serious safety hazards in batteries. Primary and secondary amines can lead to ring-opening polymerization of common ethylene carbonate electrolytes, resulting in an isolation layer between the cathode and the anode, and improving the thermal safety of the battery. In this work, the safety of batteries is considered both at the material level and at the cell level, based on the chemical reactions between amines and the …

Effects Of Traps On Photo-Induced Interfacial Charge Transfer Of Ag-Tio2: Photoelectrochemical, Electrochemical And Spectroscopic Characterizations, Zhi-Hao Liang, Jia-Zheng Wang, Dan Wang, Jian-Zhang Zhou, De-Yin Wu

Journal of Electrochemistry

In the field of metal-semiconductor composites based plasmon-mediated chemical reactions, a clear and in-depth understanding of charge transfer and recombination mechanisms is crucial for improving plasmonic photocatalytic efficiency. However, the plasmonic photocatalytic reactions at the solid-liquid interface of the electrochemical systems involve complex processes with multiple elementary steps, multiple time scales, and multiple controlling factors. Herein, the combination of photoelectrochemical and electrochemical as well as spectroscopic characterizations has been successfully used to study the effects of traps on the photo-induced interfacial charge transfer of silver-titanium dioxide (Ag-TiO₂). The results show that the increase of surface hydroxyl groups may …