Electrical and Computer Engineering Commons^™

Spatially Varying Threshold Models For The Automated Segmentation Of Radiodense Tissue In Digitized Mammograms, Richard Edson Eckert Iii

Theses and Dissertations

The percentage of radiodense (bright) tissue in a mammogram has been correlated to an increased risk of breast cancer. This thesis presents an automated method to quantify the amount of radiodense tissue found in a digitized mammogram. The algorithm employs a radial basis function neural network in order to segment the breast tissue region from the remainder of the X-ray. A spatially varying Neyman-Pearson threshold is used to calculate the percentage of radiodense tissue and compensate for the effects of tissue compression that occurs during a mammography procedure. Results demonstrating the efficacy of the technique are demonstrated by exercising the …

Multi-Sensor Data Fusion Using Geometric Transformations For The Nondestructive Evaluation Of Gas Transmission Pipelines, Philip James Kulick

Theses and Dissertations

Nondestructive evaluation (NDE) plays a vital component in the operation and maintenance of large infrastructure such as gas transmission pipelines, nuclear power plants, aircraft, bridges and highways, etc. As this infrastructure continues to age it is essential that the inspection techniques reliably and accurately predict the integrity of these systems. No single NDE method is capable of inspecting all types of anomalies and extracting all required information – a combination of methods must be used and the resulting data fused. Moreover, newer systems that are developed are often made of composite materials that include metals and dielectrics. One interrogation modality …

Hdl Implementation Of A Controller Area Network Node, Anthony Richard Marino

Theses and Dissertations

With increasing technology inside automobiles, especially law enforcement vehicles, there is a growing need for centralized wiring and device interconnection methods. Each new technology, such as GPS navigation units and in-vehicle video systems, includes a corresponding wiring harness that needs installation. The summation of all these hardwired technologies leads to large volumes of wire that negatively affect safety, power demands, and future design opportunities. A new trend among automotive manufacturers is to design and implement innovative networks that allow for shared communications between technologies.

This thesis presents the design, development, and implementation of an in-vehicle network that will centralize connections …

Development Of An Augmented Haptic Control For In-Vehicle Law Enforcement Applications, Edward R. Guest Iii

Theses and Dissertations

Typical police vehicles are filled with as much technology as the department can afford. Everything from the newest digital camera system to a simple entertainment radio is within the reach of an officer. Currently, most of these systems are installed without any consideration toward the other systems or the interaction required between the driver and the car. The lack of a systems approach in the installation has spawned a project to look at the safety and overall system installation in the New Jersey State Police vehicles.

The research presented in this thesis suggests consolidation of the various controls into one …

Simulation Of The Communication Process In A Pin Mill, Ambrose J. M. Itika

Tanzania Journal of Engineering and Technology (TJET)

Prediction of the performance of comminution equipment by mathematical models and simulation poses a great challenge to the chemical engineer. This paper describes the simulation of grinding results obtained using an impact mill. Single particle results have been used to generate breakage and selection coefficients that were used for the evaluation of the model. Results have shown that simulation model is in good agreement with the experimental data obtained at a circumferential speed above 60 m/s. At lower speeds, the models shows only partial agreement in the middle particle size ranges. The application of the model is therefore limited for …

Load Flow Solution For Three-Phase Mv Radial Distribution Connected Network Supplying Different Line Topologies, B. J. Kundy

Tanzania Journal of Engineering and Technology (TJET)

In this paper, a load flow solution for the Medium Voltage (MV) three-phase radial distribution in delta-delta (Δ–Δ) connected network supplying different line topologies such as three phase, phase to phase and single-wire earth return (SWER) networks is presented. The general voltage related network equations are developed using Kirchhoff’s voltage and current laws. Development of a solution to the load flow analysis applying the developed general voltage related network equations is proposed in order to evaluate the network voltage profile. Various numbers of arrays are developed for the identification of the network under study. The proposed method is a new …

Wind Scatterometry With Improved Ambiguity Selection And Rain Modeling, David W. Draper

Theses and Dissertations

Although generally accurate, the quality of SeaWinds on QuikSCAT scatterometer ocean vector winds is compromised by certain natural phenomena and retrieval algorithm limitations. This dissertation addresses three main contributers to scatterometer estimate error: poor ambiguity selection, estimate uncertainty at low wind speeds, and rain corruption. A quality assurance (QA) analysis performed on SeaWinds data suggests that about 5% of SeaWinds data contain ambiguity selection errors and that scatterometer estimation error is correlated with low wind speeds and rain events.

Ambiguity selection errors are partly due to the "nudging" step (initialization from outside data). A sophisticated new non-nudging ambiguity selection approach …

A Normalization Scheme Of Bidirectional Reflectances And Normalized Vegetation Indices For Short-Term Multi-Angular Spot Satellite Images, Chien-Hui Liu

Journal of Marine Science and Technology–Taiwan

Though the view angle range of SPOT HRV is smaller as compared to those of NOAA AVHRR, EOS MODIS/MISR and ADEOS POLDER, numerous researchers had showed significant bi-directional effect of ground reflectance for decades. Currently, there's no existing normalization method of bidirectional reflectances for multitemporal SPOT images. In this study, a normalization scheme for multi-angular SPOT data is proposed. This scheme will correct both atmospheric and bidirectional effect for short-term multi-temporal SPOT data. Five SPOT images scanned within twelve days are used. The results show that the variation of trees reflectance to viewing zenith angle is very significant. The proposed …

Spatiotemporal Databases: Models For Attracting Students To Research, Ágnes Bércesné Novák, Peter Revesz, Zsolt Tuza

School of Computing: Conference and Workshop Papers

In higher education professors often make much effort to introduce their students to research. Unfortunately, the present standard database systems curriculum is composed of well-settled subjects that do not lead to research. The challenge is to bring the research frontier closer to students at beginner level. In this paper we describe how it can be done in the area of spatiotemporal databases. We propose a new database systems curriculum and illustrate its benefits by mentioning several highly succsesful student projects in some recent experimental introductory database systems courses that followed the new curriculum.

Satellite Scatterometers: Calibration Using A Ground Station And Statistical Measurement Theory, Peter Kenneth Yoho

Theses and Dissertations

Satellite scatterometers have recently gained popularity due to their unique ability to measure global geophysical data on a daily basis. Increased interest in scatterometry mandates improved design and calibration of these instruments. This dissertation presents new techniques for scatterometer calibration and addresses issues related to the design of future instruments and applications. First, the use of a calibration ground station is considered. A new methodology is established for calibration of SeaWinds, NASA's current scatterometer, using a receive-only ground station. Principles of the methodology are implemented, new analysis techniques developed, and important results obtained for instrument timing, frequency, power, position, and …

Adoption Of Variable Rate Technology, Isti Surjandari, Marvin T. Batte

Makara Journal of Technology

Site Specific Management (SSM), which also variously referred to as Variable Rate Technology (VRT), is an emerging technology that enables producers to make more precise input application decisions based on soil and field characteristics. This study analyzes factors influencing the adoption of VRT for fertilizer application for cash grain production in Ohio. Results show that producer and field characteristics might influence the adoption decision on various SSM components differently. It also provides insight as to the sequence of adoption of SSM component technologies and how this sequence might differ for producers of differing characteristics.

Study On Electrochromic Effect Of Polyaniline Film, Lienda Handojo, Junus Simangunsong

Makara Journal of Technology

Study on Electrochromic Effect of Polyaniline Film. The light transmission factor of an electrochromic film changes reversibly with the application of an electrical voltage. Thereby the transparent film becomes reversibly opaque so that it may be used to control light transmission. In this paper the results of a study on polyaniline film as an electrochromic active material is reported. Polyaniline looks yellow transparent in the reduced state and turns to green-blue at its oxidized state. The electrochromic device considered in this paper was fabricated in planar configuration of ITO glass − polyaniline film − electrolyte − ITO glass which involved …

Role Of K3-Xhxpw12o40 As A Catalyst In Selective Catalysis Of Methylamine Synthesis From Ammonia And Methanol, Mohammad Nasikin

Makara Journal of Technology

Role of K3-xHxPW12O40 as a Catalyst in Selective Catalysis of Methylamine Synthesis from Ammonia and Methanol. Synthesize of methylamine from methanol and ammonia was studied in this research work using a partially potassium heteropoly salt (K3-xHxPW12O40 abbreviated as KPW) as a catalyst. KPW was prepared from heteropoly salt and potassium carbonate by using ion exchange method. The reaction was conducted at 600 ~ 800K and at the atmospheric pressure. Reactor used was a continue flow reactor with W/F=0,1~0,9g-kat.mnt./cc.Concentration of reactants and products were analyzed by gas chromathography while catalyst structure was observed by XRD (X-ray diffraction). Isothermal adsorption method was …

Identification Of The First Limiting Amino Acid In Cooked Polished White Rice Fed To Weanling Holtzman Rats, Mellova Masrizal, J. B. Lamb

Makara Journal of Technology

Forty-eight male weanling rats (91 g) were utilized to study the nutritional adequacy of cooked polished white rice. Rats were individually housed, and allowed ad libitum access to one of six treatment diets. Treatment diets were 1) polished white rice plus 10% casein and 0.18% methionine, CAS, 2) polished white rice, WHR, 3) polished white rice plus 0.45% lysine, LYS, 4) polished white rice plus0.40% methionine, MET, 5) polished white rice plus 0.30% threonine, THR, 6) polished white rice plus 0.45% lysine, 0.40% methionine, and 0.40% threonine, COM. Rice was cooked prior diet formulation using a 3 to 1 ratio …

Application Of Tabu Search Algorithm In Job Shop Scheduling, Betrianis Betrianis, Putu Teguh Aryawan

Makara Journal of Technology

Application of Tabu Search Algorithm in Job Shop Scheduling. Tabu Search is one of local search methods which is used to solve the combinatorial optimization problem. This method aimed is to make the searching process of the best solution in a complex combinatorial optimization problem(np hard), ex : job shop scheduling problem, became more effective, in a less computational time but with no guarantee to optimum solution.In this paper, tabu search is used to solve the job shop scheduling problem consists of 3 (three) cases, which is ordering package of September, October and November with objective of minimizing makespan (Cmax). …

Alum And Pacl Coagulation, Winarni Winarni

Makara Journal of Technology

Alum and PACl Coagulation. Coagulation occurs by interaction of aluminum hydrolysis products with the contaminant such as colloidal particles. It is necessary to consider the different aluminum species that may present during specific conditions, since the mechanism of turbidity removal is dependent upon them. PACl consists of preformed aluminum hydrolysis products, which are stable below pH 6 and less sensitive than in situ hydrolysis product, alum. The benefits of PACl relative to alum have been investigated as a function of pH and Al dosages. Specific conditions and aluminum species that exist during the certain mechanisms of coagulation are discussed. Results …

The Selection Of Materials For Roller Chains From The Perspective Of Manufacturing Process, Rahmat Saptono

Makara Journal of Technology

The selection of materials for an engineering component is not only requested by its design function and shape, but also the sequence through which it is manufactured. The manufacturing operation of roller chains involves drawing and trimming processes aimed at producing semi-finished chain drives component with a well-standardized dimension. In addition to final combination of properties required by design constraints, the ability of materials to be formed into a desired shape and geometry without failure is also critical. The objective of materials selection should therefore involve additional attributes that are not typically accommodated by the standard procedure of materials selection. …

An Economic Analysis Of Variable Rate Technology, Isti Surjandari, Marvin T. Batte, Mario J. Miranda

Makara Journal of Technology

Variable Rate Technology (VRT) offers an opportunity to improve production efficiency by allowing input applications to fluctuate in response to spatial variations in soil characteristics and nutrient levels. Society may also benefit from reduced negative externalities, such as surface and groundwater contamination, from input applications. Using a dynamic spatial model, this study examines how the interaction among variability, spatial autocorrelation, and mean level of soil fertility affects optimal sampling density and the economic gains from VRT. VRT was found to be profitable under selected conditions, and the optimal grid size will vary with these conditions. In the case where variability …

Optical System With 1xn Interleaver And Methods Of Making And Using Same, Michael A. Scobey, Lucien P. Ghislain, Dennis J. Derickson, Loren F. Stokes

Electrical Engineering

An optical system and method are disclosed for multiplexing or de-multiplexing channels within a wavelength band. The optical signals carried on the system comprise separate channels 1 through n, each having a unique passband and a center wavelength spaced from the center wavelength of adjacent channels by d nm. The signals are semi-multiplexed, demultiplexed, or semi-demultiplexed by an interleaver comprising optically matched and directly optically coupled etalons. Periodic spectral passbands of width less than d nm, spaced from each other a distance of zd, where z is an integer greater than or equal to 3, are substantially transmitted through the …

Uml Extensions For Real-Time Control Systems, Qimin Gao, Lyndon Brown, Luiz Fernando Capretz

Electrical and Computer Engineering Publications

The use of object oriented techniques and methodologies for the design of real-time control systems appears to be necessary in order to deal with the increasing complexity of such systems. Recently many object-oriented methods have been used for the modeling and design of real-time control systems. We believe that an approach that integrates the advancements in both object modeling and design methods, and real-time scheduling theory is the key to successful use of object oriented technology for real-time software. Surprisingly several past approaches to integrate the two either restrict the object models, or do not allow sophisticated schedulability analysis techniques. …

Viewing The Learning Process: Assessment Via Usability Testing, Vicki M. Eller, Steve Eugene Watkins, Richard H. Hall

Business and Information Technology Faculty Research & Creative Works

Learning through Computer-Based Activities Provides a Multi-Modal Approach in Which the User Can Select the Educational Media and Process. Effective Development of These Activities Requires an Understanding of User Interactivity. Traditional Assessment, Such as Test Scores and Subjective Surveys, Looks at End Results and Attitudes. This Method Does Not Monitor the Learning Process. in Particular Developer Needs to Accommodate Diverse Usage Preferences and Choices. Hence, Assessment Should Involve Usability Measures that Are Quantitative and Qualitative. Usability Testing Records Usage Patterns and User Reactions. a Usability Laboratory Was Created at the University of Missouri-Rolla. It is Supplements the Traditional Assessment for …

Modeling And Analysis Of Soft-Test/Repair For Ccd-Based Digital X-Ray Systems, Byoungjae Jin, Nohpill Park, Koshy M. George, Minsu Choi, Mark B. Yeary

Electrical and Computer Engineering Faculty Research & Creative Works

Modern X-ray imaging systems evolve toward digitization for reduced cost, faster time-to-diagnosis, and improved diagnostic confidence. For the digital X-ray systems, charge coupled device (CCD) technology is commonly used to detect and digitize optical X-ray image. This paper presents a novel soft-test/repair approach to overcome the defective pixel problem in CCD-based digital X-ray systems through theoretical modeling and analysis of the test/repair process. There are two possible solutions to cope with the defective pixel problem in CCDs: one is the hard-repair approach and another is the proposed soft-test/repair approach. Hard-repair approach employs a high-yield, expensive reparable CCD to minimize the …

Parallel Microgenetic Algorithm Design For Photonic Crystal And Waveguide Structures, J. Cai, L. Li, Gregory P. Nordin, J. Jiang

Faculty Publications

We have developed a powerful parallel genetic algorithm design tool for photonic crystal and waveguide structures. The tool employs a small-population-size genetic algorithm (microgenetic algorithm) for global optimization and a two-dimensional finite-difference time-domain method to rigorously design and optimize the performance of photonic devices. We discuss the implementation and performance of this design tool. We demonstrate its application to two photonic devices, a defect taper coupler to connect conventional waveguides and photonic crystal waveguides, and a sharp 90˚ waveguide bend for low index contrast waveguides.

Ultracompact High-Efficiency Polarizing Beam Splitter With A Hybrid Photonic Crystal And Conventional Waveguide Structure, J. Cai, S. Kim, Gregory P. Nordin, J. Jiang

Faculty Publications

We propose an ultracompact high-efficiency polarizing beam splitter that operates over a wide wavelength range and is based on a hybrid photonic crystal and a conventional waveguide structure. Within a small area (15 mm 3 10 mm), this polarizing beam splitter separates TM- and TE-polarized modes into orthogonal output waveguides. Results of simulations with the two-dimensional finite-difference time-domain method show that 99.3% of TM-polarized light is def lected by the photonic crystal structure (with a 28.0-dB extinction ratio), whereas 99.0% of TE-polarized light propagates through the structure (with a 32.2-dB extinction ratio). Wave vector diagrams are employed to explain the …

Multiple Uav Cooperative Search Under Collision Avoidance And Limited Range Communication Constraints, Randal W. Beard, Timothy W. Mclain

Faculty Publications

This paper focuses on the problem of cooperatively searching, using a team of unmanned air vehicles (UAVs), an area of interest that contains regions of opportunity and regions of potential hazard. The objective of the UAV team is to visit as many opportunities as possible, while avoiding as many hazards as possible. To enable cooperation, the UAVs are constrained to stay within communication range of one another. Collision avoidance is also required. Algorithms for team-optimal and individually-optimal/team-suboptimal solutions are developed and their computational complexity compared. Simulation results demonstrating the feasibility of the cooperative search algorithms are presented.

Energy Efficient Routing Protocols For Mobile Ad Hoc Networks, Chansu Yu, Ben Lee, Hee Yong Youn

Electrical and Computer Engineering Faculty Publications

Although establishing correct and efficient routes is an important design issue in mobile ad hoc networks (MANETs), a more challenging goal is to provide energy efficient routes because mobile nodes' operation time is the most critical limiting factor. This article surveys and classifies the energy-aware routing protocols proposed for MANETs. They minimize either the active communication energy required to transmit or receive packets or the inactive energy consumed when a mobile node stays idle but listens to the wireless medium for any possible communication requests from other nodes. Transmission power control approach and load distribution approach belong to the former …

Preparation And Characterization Of Y-Type Carbon Nanotubes By Using Anodized Alumina Oxide (Aao) Template, Jing Zhang, Quan-Yong Gao, Yong Yang

Journal of Electrochemistry

In this work, potential-modulation method was used in two-step anodization process to make an AAO template with Y-type nanochannels. Then Y-type carbon nanotubes with controlled length and branch angle were prepared in the template based on chemical vapor decomposion (CVD) method with Co particles as catalyst and C₂H₂ as carbon source. The Y-type nanotube branches exhibit the angle distribution ranging from 20° to 120°. The results demonstrated that the oxidation potential should be responsible for the angles and length of the branches. Short pulse and high oxidation potential will result in the short and dense nanotube branches.

Study On The Gas Generation In Different Charging Voltage During Formation Process In Polymer Lithium-Ion Battery, Li Huang, Ming-Gang Jin, Hui-Qun Cai, Ming-Sen Zheng, Quan-Feng Dong, Jin-Kua You, Zu-Geng Lin

Journal of Electrochemistry

The gases of polymer lithium-ion battery (PLI) generated under different voltages during the first charging process were examined by means of gas chromatography (GC), and the mechanism of the gas generation was discussed. The electrolyte used in batteries was 1 mol/L LiPF₆-EC～DMC～EMC=1∶1∶1(in volume). The results showed that when the charging voltage is less than 2.5 V,  the main component of generated gases are H₂ and CO₂, and when the charging voltage is 2.5 V, EC begins to decompose. Due to the decomposition of EC, the main generated gas is C₂H₄ when the …

Application Of Hydrogen-Storage Alloy Electrode In Electrochemical Reduction Of Glucose, Hui Chen, You-Gen Tang, Zheng Tang

Journal of Electrochemistry

Electrolysis of glucose was performed at constant potential using hydrogen-storage alloy as catalytic reduction electrode. It was found that the superficial treatment and activation of hydrogen-storage alloy powder had obvious effects on improving the current efficiency of sorbitol. Under the optimums, current efficiency of sorbitol by electrolyzing glucose was over 94%. The yield of sorbitol was over 80%, the lifespan of electrode was tested and analyzed, the ways of regeneration were discussed.

Optimizing Catalyst Layer Composition Of Pemfc By Orthogonal Method, Ming-Hua Wang, Xin-Jian Zhu, Guang-Yi Cao, Sheng Sui, Qing-Chun Yu, Ming-Ruo Hu, Zheng-Yu Fan

Journal of Electrochemistry

The optimal composition of catalyst layer in a PEMFC electrode was studied through orthogonal method. It was showed that the performance of hydrophilic electrodes, in which there is no PTFE in the catalyst layer, were more favorable than that of hydrophobic electrodes. According to this condition, the power density of PEMFC attained 0.37 w·cm^-2 when the Nafion loading was 1.4 mg·cm^-2, and the Pt loading was 0.4 mg·cm^-2 in the catalyst layer, using H₂ as fuel and air as oxidant both at atmospheric pressure. Additionally, the results showed that increasing Pt loading in Pt/C catalyst …