Electrical and Computer Engineering Commons^™

Pid Control For Lower Limb Exoskeletons: A Framework Evaluation, Javlonbek Rakhmatillaev, Vytautas Bučinskas

Chemical Technology, Control and Management

This research provides a detailed guideline for implementing and evaluating Proportional Integral Derivative (PID) control frameworks in lower limb rehabilitation exoskeleton robotics. It examines the role of control systems within rehabilitation robotics, outlines the principles of PID control, describes exoskeleton architecture, explores applications of PID control, reviews optimization strategies, presents experimental validations, and considers future developments in the field. The proposed control framework incorporates aspects of mechanical design, actuator and sensor selection, and PID-based control algorithms, thereby promoting safe, accurate, and individualized rehabilitation support. Recommendations and effective guidance for future work are also presented.

Addressing System Strength And Reliability Concerns In Renewable Energy-Based Weak Grids Using Synchronous Condensers Determined By Hybrid Gru-Classical Optimization Method, Md Ohirul Qays, Iftekhar Ahmad, Daryoush Habibi, Mohammad A.S. Masoum, Thair Mahmoud

Research outputs 2022 to 2026

Owing to the higher-integration of renewable energy generators (REGs), conventional coal-based synchronous generators are being decommissioned from generation fleets, resulting in system strength and reliability concerns. Along with the increasing load demand, deficiency of system strength can be a huge risk to system stability and can eventually lead to blackouts by disconnecting REGs from grid systems. In the literature, researchers and power engineers have proposed to deploy synchronous condensers (SynCons) as a mitigation strategy to address the system strength and reliability challenges. SynCons are, however, expensive and require investigation for higher reliability results before installation. To address the concerns, SynCons’ …

State Of Charge Estimation Of Ev Secondary Battery Pack Using Hybrid Hedge Feedforward Feedback-Based Gated Recurrent Unit To Extend Lifespan, Md Ohirul Qays, Iftekhar Ahmad, Daryoush Habibi, Mohammad A.S. Masoum, Paul Moses

Research outputs 2022 to 2026

Accurate estimation of state of charge (SoC) and maintaining balanced charge levels across secondary battery cells are crucial in battery management systems (BMSs) to extend battery life while improving the performance and thermal stability of Li-ion batteries (LIBs) in electric vehicles (EVs). However, there are still underexplored challenges associated with circulating currents in electrochemical cells during continuous operation which can overheat battery packs, reducing their life span or result in dangerous thermal runaways. This paper investigates SoC estimation using various real-world charging and discharging profiles, along with charge-balancing strategies to enhance the longevity of parallel-connected Li-ion battery cells. A newly …

Hybrid Quantum-Classical Optimization Of The Resource Scheduling Problem, Tyler Christeson, Md Habib Ullah, Ali Arabnya, Amin Khodaei, Rui Fan

Electrical and Computer Engineering: Faculty Scholarship

Resource scheduling is critical in many industries, especially in power systems where the Unit Commitment (UC) problem determines the on/off status and output levels of generators under physical and economic constraints. Traditional exact methods, such as Branch-and-Bound, Branch-and-Cut, dynamic programming and mixed-integer linear programming (MILP), remain the backbone of UC solution techniques, but they often rely on linear approximations or exhaustive search, leading to high computational burdens as system size grows. Metaheuristic approaches, such as genetic algorithms, particle swarm optimization, and other evolutionary methods, have been explored to mitigate this complexity; however, they typically lack optimality guarantees, exhibit sensitivity to …

Multi-Objective Optimization Of Energy Costs And Ev Battery Health In V2g Enabled Homes, Dzifa M. Hodey

Theses and Dissertations--Computer Science

Electric vehicles (EVs) and rooftop solar photovoltaic (PV) systems are increasingly being integrated into residential settings, creating new opportunities for vehicle-to-grid (V2G) and vehicle-to-home (V2H) operations. In these systems, the EV battery functions as a controllable energy storage unit that can charge from the grid or PV and discharge energy to supply household load or export to the grid for a profit. By intelligently scheduling this bidirectional power exchange, households can reduce electricity costs and enhance PV utilization. Realizing these benefits requires optimization strategies that balance cost reduction with EV battery health preservation. However, existing V2G/V2H studies largely emphasize cost …

Analytical And Semi-Analytical Modeling Of Solar Cells Using The Lambert W Function: A Comprehensive Review Of Equivalent Circuits, Adel El-Shahat, Martin Ćalasan, Snežana Vujoševic, Shady H. E. Abdel Aleem

Engineering Technology Faculty Publications

The modeling of photovoltaic (PV) cells through equivalent circuits forms a central element in the analysis, simulation, and optimization of solar energy systems. Traditional approaches often depend on iterative numerical methods to solve the implicit current–voltage (I–V) equations. In contrast, the Lambert W function has emerged as an effective mathematical tool that enables closed-form or semi-analytical expressions for a wide range of PV models. This paper presents a Lambert W-centered review of analytical and semi-analytical formulations for PV equivalent-circuit models, covering classical single-diode and multi-diode structures and modern variants incorporating additional elements, voltage-dependent parameters, and topology rearrangements. The models are …

Multi-Objective Optimization Strategy For Component Sizing In Solar-Hydrogen Microgrids Using An Advanced Hybrid Genetic Algorithm, Dylan Jones

UNF Graduate Theses and Dissertations

This thesis presents the development of a genetic algorithm (GA) optimization framework for the design and component sizing of hybrid solar-hydrogen microgrids. The framework addresses a critical gap in research and existing commercial tools by unifying performance maximization and cost minimization objectives across both grid-tied and islanded configurations. Integrating solar photovoltaics, electrolyzers, hydrogen storage, fuel cells, and batteries, the GA employs adaptive weighting and dynamic boundary constraints to balance technical feasibility with economic efficiency. To ensure real-world viability, the algorithm relies on a novel Daylight Sun Factor (DSF) for localized solar assessment and was rigorously validated against multi-year, high-fidelity irradiance …

Communication-Aware Energy Optimization For Electric Vehicles With Adaptive Cruise Control, Shahriar Shahram

Graduate Studies Theses and Dissertations 2026

This dissertation develops information-driven methods to reduce traction energy in battery electric vehicles during adaptive and cooperative cruise control. Physics-grounded energetics are embedded in a predictive controller that accounts for intermittent V2V preview, sensing noise, packet loss, and powertrain limits. To ensure deployability, the nonconvex traction–power map is replaced by locally convex surrogates so each step solves a small, strictly convex QP in real time (average ≈ 70 ms/step on a desktop CPU: 8 cores/16 threads, 4.2–5.0 GHz), leaving margin at typical sampling rates (Ts =0.05–0.10 s; N=15–25).

Across standardized drive cycles from NREL DriveCAT—including FTP–75 (light duty), NREL Class …

Graph Based Planning With Guarantees, Trazon Tyrik Jimerson

Mechanical Engineering ETDs

This thesis presents two graph-based methods with formal guarantees for motion planning and routing. First, the invariant-set motion planner (ISMP), which uses constraint admissible positive invariant (CAPI) sets of closed-loop dynamics, is adapted for spacecraft attitude planning to avoid moving keep-out zones. Contributions include time bounds for maneuvers via exponential stability, a single-stage reachability graph from one-step backward reachable CAPI sets, and its multi-stage expansion to certify node safety over time. Simulations verify safe attitude control with moving obstacles. Second, we formulate a convex optimization problem over a network for evacuation planning with operational constraints such as helicopter capacity and …

Design And Optimization Of High-Frequency Medium-Voltage Dual Active Bridge Dc/Dc Converter Using Sic Device, Hui Cao

Graduate Theses and Dissertations

High frequency Dual Active Bridge (DAB) converters have become a key enabling technology in medium- and high-power applications such as renewable energy integration, electric vehicle fast charging, and emerging DC power distribution systems. However, when operating at high power and high frequency, DAB converters face critical challenges including limited soft-switching range, uneven semiconductor loss distribution, deadtime-induced resonance, switching-frequency constraints of wide-bandgap (WBG) devices, and transformer DC bias during dynamic transitions. This dissertation addresses these challenges through advancements in modulation strategies and converter architecture. First, an enhanced triple-phase-shift (E-TPS) modulation scheme is proposed to achieve balanced switching and conduction losses across …

Optimization Of Size And Siting Of Distributed Generation In Unbalanced Distribution Systems: A Literature Review, Pema Dorji, Stefan Lachowicz, Octavian Bass

Research outputs 2022 to 2026

Renewable energy sources (RES) are essential for meeting the rising global electricity demand while reducing greenhouse gas emissions from conventional generation. As traditional systems approach capacity saturation, the integration of RES into power grids becomes increasingly vital. However, the intermittent and variable nature of RES introduces significant technical, economic, and operational challenges. This review focuses on the optimal planning and integration of distributed generation in unbalanced distribution systems, which more accurately reflect real-world power network conditions. Emphasis is placed on siting and sizing strategies aimed at enhancing voltage stability, minimizing power losses, and reducing system costs and emissions. The review …

Microstrip Antenna Design Based On Ai And Machine Learning, Waleed Mohamed Sha Moulavi

Theses

Microstrip patch antennas (MPAs) rely on precise impedance matching for efficient power transfer between the antenna and feed line. This is often achieved using a number of different techniques, one of which is the quarter-wavelength transformer (QWT). While commercial electromagnetic (EM) solvers offer robust optimization capabilities, they often operate as "black boxes" without providing physical insights into parameter interdependencies. Furthermore, this thesis focuses on the specific scenario where the antenna input impedance is purely real. To address the lack of explicit design relationships for these specific conditions, this thesis develops and comparatively evaluates artificial intelligence (AI) models for QWT width …

Intelligent Decision-Making Systems In Smart Greenhouses, Muso Berdiyor Ugli Allanov

Chemical Technology, Control and Management

Smart greenhouses offer a solution to sustainable food production under climate uncertainty, yet their management often depends on fixed rules or human intuition. This study proposes an intelligent decision-making framework that integrates optimization, simulation, and a neural set into a self-learning system. By generating “conditionally real data” through simulation and evolutionary algorithms, the system can predict microclimatic changes and optimize control of water, energy, and nutrients. Continuous digital feedback enables adaptive, data-efficient operation even with limited real data. Experimental results demonstrate reduced resource use and improved yield stability, advancing the development of autonomous and resilient greenhouse ecosystems.

Environment Mapping And Gps-Based Trailer Parking Using Low-Cost Peripheral Sensors And Post-Processing Algorithms, Connor Best

Journal of Undergraduate Research at Minnesota State University, Mankato

This paper explores the merit of software data optimization through two practical examples: environment mapping & GPS navigation.

Inductorless Cascaded Low-Power Dc-Dc Converter: Optimizing Performance Metrics Through Machine Learning Techniques, Ahmed Khaled, Sameh O. Abdellatif

Electrical Engineering

This study presents a groundbreaking methodology for optimizing the operational efficiency of a three-stage boost DC-DC cascaded converter through the application of a Random Forest(RF) machine learning algorithm. A novel figure of merit is meticulously formulated to quantitatively evaluate the converter’s performance, focusing on critical metrics such as power conversion efficiency, output DC ripple levels, and response time. The Random Forest model is trained on a comprehensive dataset encompassing a wide range of resistive and capacitive design parameters, with the figure of merit serving as the output indicator. Rigorous simulations and analyses demonstrate that the integration of LM741 operational amplifiers …

Tools To Design Algorithms For Implementing Control Over Quantum Computers, Shilpa Narashimhan, Jihan Abou Halloun, Kip Nieman, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Quantum computers (QCs) may find future applications within control systems that operate manufacturing processes. For application within control engineering, quantum algorithm development must be led by control engineers. However, control engineers may face challenges in designing quantum algorithms for control engineering problems. In this work, we provide several path-finding studies that leverage engineering tools such as optimization, encryption, and computational "short-cuts" toward making algorithm design for QC easier for control engineers.

Analog Hardware Implementation Of A Linearly Constrained Quadratic Program Real-Time Solver, Claire E. Tylutki, Claire Tylutki

Master's Theses

This thesis presents the design, implementation, and analysis of a hardware system for solving Linearly Constrained Quadratic Programs (LCQPs) in real time. The architecture follows a generalized feedback structure composed of three key elements: gradient descent on the quadratic cost function, saturation-based nonlinearity to enforce inequality constraints, and an integral controller with an anti-windup mechanism to regulate dynamic behavior and determine steady-state error. This majority analog system converges with equilibria that satisfy the Karush-Kuhn-Tucker (KKT) optimality conditions. Using a representative LCQP, this work presents simulation of the circuit in PLECS and LT Spice to confirm the feasibility of the novel …

Rotating Scatter Mask System Optimization Study For Determining Optimal Image Recreation, Seth L. Grover

Theses and Dissertations

The Rotating Scatter Mask (RSM) system is a radiation imaging technology currently limited by the mask design and governing identification algorithm parameters. To optimize the RSM design, Dakota—an optimization software—was integrated with a ray tracing code that simulates particle interactions with the RSM detector, and with the Locally Competitive Algorithm (LCA), which reconstructs the source image based on the ray tracing code’s Detector Response Matrix (DRM). Since the original ray tracing code was developed in MATLAB, it was translated into Python to improve compatibility with both Dakota and LCA. The Python version of the ray tracing code was then integrated …

Optimization-Based Distributed Controller For Multi-Agents System In Microgrid Secondary Control, Fahad S. Alshammari, Ayman El-Refaie, Saleh Alyahya, Sheroz Khan

Electrical and Computer Engineering Faculty Research and Publications

Micro-grids function to connect to power system power produced by the renewable energy resources. In islanded micro-grids, grid-forming units collaborate to maintain the micro-grids voltage and frequency by utilizing droop control technique that includes primary, secondary and tertiary levels. Secondary control intervenes to improve power sharing and restore voltage and frequency to their nominal levels. However, the conventional droop control applied to a grid with mismatched line parameters experiences a trade-off between reactive power sharing and voltage regulations. This paper applies real-time trajectory tracking convex optimization to ensure by communicating power sharing between units in a consensus topology. The optimization …

Artificial Intelligence Applications For Grid-Connected Solar Inverters, Utkirjon Ubaydullaev, Sarvinoz Mirzaeva, Hasan Mustafoev

Chemical Technology, Control and Management

The increasing global demand for renewable energy has highlighted the importance of grid-connected solar inverters in ensuring efficient and stable power conversion. However, challenges such as fluctuations in solar energy generation, grid disturbances, and power quality issues necessitate advanced control strategies. The integration of artificial intelligence (AI) into solar inverters presents a transformative solution, enhancing performance, adaptability, and reliability in real-world applications.

This review explores the role of AI techniques, including machine learning (ML), deep learning (DL), fuzzy logic, and reinforcement learning (RL), in optimizing key inverter functionalities such as maximum power point tracking (MPPT), fault detection, power quality enhancement, …

Long-Term Techno-Economic Analysis Considering System Strength And Reliability Shortfalls Of Electric Vehicle-To-Grid-Systems Installations Integrated With Renewable Energy Generators Using Hybrid Gru-Classical Optimization Method, Md Ohirul Qays, Iftekhar Ahmad, Daryoush Habibi, Paul Moses

Research outputs 2022 to 2026

Higher penetration of Electric Vehicle-to-Grid charging stations (EV2GCSs) in power grids integrated with renewable energy generators (REGs) result in system-instabilities raising the risk of blackout issues. Although techno-economic feasibility of EV2GCSs has been identified within the literature addressing power outage and financial concerns as a contemporary solution, no long-term techno-economic analysis has been investigated considering system strength and reliability shortfalls before the EV2GCSs installation. Therefore, this research aims to evaluate the long-term (2025–2045) techno-economic analysis of EV2GCSs into REGs-integrated grid systems by accounting for system strength and reliability factors. A novel optimization framework is developed, combining Gated Recurrent Units (GRU) …

Analytical Dispatch Strategies For Pumped Storage Hydro: A Conditional Dynamic Programming Approach To Discontinuous Multi-Period Optimization Problems, Jian Liu, Jianwen Zhang, Zaiwu Gong, Donald C. Wunsch, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

The increasing integration of renewable energy sources like wind and solar poses significant challenges to secure and stable grid operation. Energy storage systems, particularly pumped storage hydro (PSH), play a crucial role in balancing power supply and demand. Traditional analytical studies of PSH economic dispatch problems often assume zero lower bounds for generating and pumping rates to simplify analysis and derive analytical solutions for multi-period optimization problems. However, the inherent mechanical design constraints of PSH require non-zero minimum flow rates for efficient operation. We analyze two scenarios, merchants having PSH only and merchants having both PSH and wind farms. In …

Methodology Of Automated Control Of Situations In Structurally Complex Systems With Recycled Flows, Khusan Zokirovich Igamberdiev Academician, Madina Mirxalilovma Fozilova

Chemical Technology, Control and Management

This article discusses the methodology of automated management of situations in structurally complex systems with recycled flows. The need to develop a correct model for effectively controlling such systems based on scientific principles of analysis and decision-making is substantiated. Particular attention is paid to modeling, optimizing, and using digital technologies, including artificial intelligence, to improve the accuracy and efficiency of management decisions. The principles of decomposition, multi-criteria optimization, and linguistic models of fuzzy correspondence are described, which can be used in conditions of uncertainty and complexity of industrial facilities.

Lagrange Multipliers As A Metric For Early-Stage Shipboard Power System Design, Magdalen A. Barnes

Theses and Dissertations--Electrical and Computer Engineering

Integrated power systems are essential in the operation of electric ships and must function under a diverse range of conditions. In addition to routine operation, ships should be prepared to respond to challenging events that require significant amounts of power. Demanding scenarios, coupled with complex and interconnected power systems, present challenging issues. The power and energy ratings of equipment are crucial factors in the operational success of the ship; however, to meet economic constraints, balance between performance and cost must be upheld. Details regarding equipment models and specifications are typically unavailable during early-stage design. Power system modeling and simulation can …

Two-Level Multi-Objective Design Optimization Including Torque Ripple Minimization For Stator Excited Synchronous And Flux Switching Machines, Ali Mohammadi, Oluwaseun A. Badewa, Yaser Chulaee, Dan M. Ionel

Electrical and Computer Engineering Graduate Research

Electric machine performance can be enhanced through torque ripple mitigation, which reduces mechanical vibrations and improves system stability and operation. This paper proposes a novel two-level optimization method for synchronous flux-switching and hybrid excitation machines, featuring an innovative multi-point spline shaping approach for torque ripple minimization. The study employs experimentally validated models based on a prototype with a similar topology. The optimization process is implemented on two distinct designs: a 20-pole inner rotor PM-excited stator machine and a 28-pole outer rotor DC-excited stator machine. Analysis results demonstrate that the proposed innovative method significantly reduces torque ripple in both configurations. Force …

Powersynth 2: Automated Power Electronics Physical Design Synthesis With Custom And Heterogeneous Components, Mehran Sanjabiasasi, Alan H. Mantooth, Yarui Peng

Electrical Engineering and Computer Science Faculty Publications and Presentations

Electronics Design Automation (EDA) has shown significant importance in the power electronics industry. As power electronic circuits become more complex, the traditional trial-and-error approach in physical design becomes less effective and time-consuming. Novel packaging technologies and intelligent physical design automation solutions are crucial to overcome these challenges and produce reliable solutions. PowerSynth 2 is an EDA tool for generating and optimizing power module layouts. To extend the layout synthesis capability beyond power modules, the layout engine needs to consider various custom components such as capacitors, inductors, and gate drivers. This research presents a novel framework for the layout synthesis process …

Optimizing Ai Language Models: A Study Of Chatgpt-4 Vs. Chatgpt-4o, Md Nurul Absar Siddiky, Muhammad Enayetur Rahman, Md Fayaz Bin Hossen, Muhammad Rezaur Rahman, Md. Shahadat Jaman

Electrical & Computer Engineering Faculty Publications

This paper presents a comparative analysis of OpenAI's GPT-4 and its optimized variant, GPT-4o, focusing on their architectural differences, performance, and real-world applications. GPT-4, built upon the Transformer architecture, has set new standards in natural language processing (NLP) with its capacity to generate coherent and contextually relevant text across a wide range of tasks. However, its computational demands, requiring substantial hardware resources, make it less accessible for smaller organizations and real-time applications. In contrast, GPT-4o addresses these challenges by incorporating optimizations such as model compression, parameter pruning, and memory-efficient computation, allowing it to deliver similar performance with significantly lower computational …

Flux-Weakening Control Methods For Permanent Magnet Synchronous Machines In Electric Vehicles At High Speed, Samer Alwaqfi, Mohamad Alzayed, Hicham Chaoui

Electrical & Computer Engineering Faculty Publications

Permanent magnet synchronous motors (PMSMs) are widely favored by manufacturers for use in electric vehicles (EVs) because of their many benefits, which include high power density at high speeds, ruggedness, potential for high efficiency, and reduced control complexity. However, since the Back Electromotive Force (EMF) increases proportionally with the motor’s rotational speed, it must be carefully controlled at high speeds. Flux-weakening (FW) control is required to avoid excessive electromagnetic flux beyond the power source and inverter’s voltage restrictions. This paper aims to compare various FW control strategies and analyze their effectiveness in maximizing the speed of PMSMs in EV applications …

Characterization, Optimization, And Performance Evaluation Of Pcm With Al2o3 And Zno Hybrid Nanoparticles For Photovoltaic Thermal Energy Storage, Md Golam Kibria, Utpol K. Paul, Md Shahriar Mohtasim, Barun K. Das, N. N. Mustafi

Research outputs 2022 to 2026

The electrical efficiency of the photovoltaic (PV) panel is affected significantly with increased cell temperature. Among various approaches, the use of Phase Change Materials (PCMs) with nanoparticles is currently one of the most effective for reducing and managing the temperature of PV panels. In this study, paraffin wax as PCM with different loading levels (0.5 %, 1 %, and 2 %) of hybrid nanoparticles Al2O3 and ZnO were successfully synthesized and their effects on the performance of the Photovoltaic-Thermal (PVT) system were investigated experimentally. Additionally, a prediction model was developed to analyze the interaction between the operating factors (independent variable) …

Multi-Dimensional Iot-Based Energy Management Approach For Smart Homes: A Unified Model For Comfort And Energy Efficiency, Muhammad Ans, Teodoro Montanaro, Ilaria Sergi, Ahmad Alsharoa, Miriam Pezzuto, Luigi Patrono

Electrical and Computer Engineering Faculty Research & Creative Works

As smart home technologies evolve, achieving energy-efficient indoor climate management while maintaining comfort and air quality is a growing priority. This paper introduces a novel optimization framework for smart buildings that minimizes energy costs and dynamically manages indoor environmental conditions, specifically temperature, CO₂ concentration, and illuminance. Unlike conventional systems, our model incorporates dynamic constraints that respond to day-night comfort requirements and leverage real-time variations in electricity prices and environmental conditions. By optimally controlling the power levels of air conditioning, air purification, and lighting systems, the framework ensures indoor comfort while significantly reducing operational costs.A nonlinear optimization approach with dynamic …