Electrical and Computer Engineering Commons^™

Daubechies And Quadratic B-Spline Wavelets For Automated Early Diagnosis Of Alzheimer's Disease, Genevieve Jacques

Theses and Dissertations

Alzheimer's disease is a neurological disorder characterized by nerve degeneration and neuronal death. The diagnosis of Alzheimer's disease at an early stage is a major concern due to the lack of a standard and effective diagnosis procedure available to community healthcare providers, as well as the increasing numbers of the elderly population affected. Clinical evaluation, the standard AD diagnostic procedure conducted at major university hospitals and research clinics, achieves, on average, a positive predictive value of 93%, with a sensitivity of 83%, specificity of 55% and an overall accuracy of 75%. An effective and objective tool for early diagnosis of …

Vlsi Implementation Of An Efficient Method For The Computation Of Line Spectral Frequencies, David L. Reynolds

Theses and Dissertations

In speech coding applications using linear predictive techniques, the computation of line spectral frequencies (LSFs) from the predictor coefficients is an extremely computationally intensive task. The unique properties of the symmetric and antisymmetric polynomial roots limit the region which must be searched, however it is still necessary to perform a root-finding algorithm on a high-order polynomial.

Certain algorithms have been developed to reduce the complexity of the root finding exercise. One such algorithm, developed by Ramachandran and Kabal, takes advantage of certain properties of the symmetric and antisymmetric polynomials to map the upper portion of the unit circle onto the …

Three-Dimensional Shape Characterization For Particle Aggregates Using Multiple Projective Representations, Jonathan Paul Corriveau

Theses and Dissertations

Shape descriptors are used extensively in computer vision/automated recognition applications such as fingerprint matching, robotics, character recognition, etc. The conventional two-dimensional shape descriptors used in these applications do not readily lend themselves to compact representations in three dimensions. The situation is even more challenging when one attempts to numerically describe the three-dimensional shapes of a mixture of objects such as in an aggregate mix.

The goal of this study is the design, development and validation of automated image processing algorithms that can estimate three-dimensional shape-descriptors for particle aggregates. The thesis demonstrates that a single set of numbers representing a composite …

An Investigation Of Multi-Dimensional Evolutionary Algorithms For Virtual Reality Scenario Development, Scott Papson

Theses and Dissertations

Virtual reality (VR) has emerged as a powerful visualization tool for design, simulation, and analysis in modem complex industrial systems. The primary motivation for this thesis is to develop a framework for the effective use of VR in design-simulation-analysis cycles, particularly in situations involving large, complex, multi-dimensional data-sets. This thesis develops a framework that is intended to support not only the integration of such data for visual, interactive, and immersive displays, but also provides a method for performing risk analysis. Previously "static" VR environments are enhanced with time-evolutionary capabilities. Four candidate algorithms are evaluated for this purpose – deterministic modeling, …

Heterogeneous Multi-Sensor Data Fusion Using Geometric Transformations And Parzen Windows For The Nondestructive Evaluation Of Gas Transmission Pipelines, Joseph Anthony Oagaro

Theses and Dissertations

The natural gas transmission pipeline network in the United States is a key component of the nation's energy supply infrastructure and extends for over 280,000 miles and has an average age of over 60 years. The integrity of the pipeline is maintained by periodic inline inspections using magnetic or ultrasonic pigs. Defect characterization algorithms developed using current pigging data are hampered by the fact that single inspection techniques (either magnetic or ultrasonic) do not yield sufficient information for accurately and repeatably characterizing defects. This thesis demonstrates that defect characterization algorithms using multiple inspection techniques can accomplish this task. In particular, …

Energy Meter Reading And Tampering Protection Through Powerline Communication Channel, S Naiman

Tanzania Journal of Engineering and Technology (TJET)

POwer utility companies have suffered revenue losses due to uncollected bills and energy tampering for many years. The use of powerline communication to overcome the problems has been proposed. This needs tampering detection and transceivers capable of communicating data through poww•line channel. This paper identifies different methods Of tampering, presents simulated results for tampering detection scheme and proposes a Direct Sequence Spread Spectrum (DSSS) wilh Binary Phase Shift Keying (BPSK) transceiver design for energy metering as a solution to the problem. The choice of DSSS-BPSK modulation scheme is based on its robustness and its ability to spread signal inro wide …

Information And Communication Technology Applications In The Tanzanian Health Sector, M Victor

Tanzania Journal of Engineering and Technology (TJET)

The potential role of Information and Communication Technology (ICT) in the health sector is to improve the delivery of health services and would also help to deal with major constraints in uplifting the health standards Of Tanzanians. ICT in heath can be used to facilitate remote consultation, diagnosis and treatment. The objective Of the study was exploratory in nature and aimed at determining the awareness level of the länzanian health sector on various ICT applications which could be used in the sector. The study also aimed ar establishing the challenges to the implementation of ICT in the Tanzanian health sector. …

Short-Term Scheduling Of A Hydro-Thermal System Using Linear Programming Technique, A Kyaruzi

Tanzania Journal of Engineering and Technology (TJET)

The paper discusses the short term scheduling of Hydrothermal for Tanzania Electricity Supply Company (TANESCO) Power System. The problem is to determine on hourly interval the Hydro and Thermal generation. The scheduling keeps balance between production and consumption in a reliable and economical way during the study period. Linear programming (LP) mathematical model using MATL4B has been developed. The constraints are hydrological balance, thermal power plants limitations and load requirements. The result from LP solution gave low operation cost. Generation was mainly from hydro and all reservoirs elevation was high at the end ofplanning period.

Usefulness Of Technology Life Cycle In Tanzania: The Case Of The Ipl Developed Technologies, Abdallah Chungu

Tanzania Journal of Engineering and Technology (TJET)

This study sought to identify the adoption rate of technologv innovations developed by the Institute Of Production Innovation (IPI) at the University Of Dar-es-Salaam since 1984 to 1997 using a sigmoid shaped curve (S-shaped curves) to predict the life cycles of the respective technologies. Depending on the stimuli imparted to the specific technology, some of such technologies for instance, cinva ram and block making machines with hollow/spacer/louver exhibited longer life period as indicated by a series Of infer-connected S-curves. Other technologies including but nor limited to sunflower oil processing kit-winnowers, scorcher with one stove, seed roller, standard wheelbarrow, and manual …

2004 Fall Engr333 Final Report On Co-Generation (Section A), Matt Dekam, Chris Wiesehan, Jason Flietstra, Jeremy Hanson, Brian Katerberg, Kevin Palmer, Aaron Svacha, Aaron Buys, Josh Blocker, Matt Vredevoogd, Andrew Huisjen, Thomas Totoe, Andy Vandermoren, Chris Vanroekel

ENGR 333

The goal of the project was to construct a realistic plan to get Calvin off the grid. This means that Calvin would own and operate on-site facilities that generate all the electricity consumed by the campus. Current peak load for the college is approximately three megawatts. Upon completion of the new recreation center and dining hall renovation, future load will climb to roughly five megawatts. As a result, the desired system to remove the college from the grid would provide five megawatts.

2004 Fall Engr333 Final Report On Wind Generation (Section B), Terry Austen, Kristin De Groot, Matt Ooms, Andy Van Noord, Kurt Koubal, Dan Kuiper, Andy Wermel, Ryan Dewall, Eddie Lucas, Dawn Svenkeson

ENGR 333

An energy savings plan for Calvin College has been developed. The plan suggests implementing a small-scale wind turbine pilot program and an energy usage awareness program (Powerful Savings). If implemented, this proposal could save around $6,400 annually with a payback period of 8 years.

Byu Micro-Sar: A Very Small, Low-Power Lfm-Cw Synthetic Aperture Radar, Michael Israel Duersch

Theses and Dissertations

Brigham Young University has developed a low-cost, light-weight, and low power consumption SAR for flight on a small unmanned aerial vehicle (UAV) at low altitudes. This micro-SAR, or uSAR, consumes only 18 watts of power, ideal for application on a small UAV. To meet these constraints, a linear frequency modulation-continuous wave (LFM-CW) transmit signal is utilized. Use of an LFM-CW signal introduces some differences from the typical strip map SAR processing model that must be addressed in signal processing algorithms. This thesis presents a derivation of the LFM-CW signal model and the associated image processing algorithms used for the uSAR …

The Effects Of Influent Debit On Hydrodynamic Characteristic Of Bojongsoang Facultative Pond: Without Wind Effects, Rositayanti Hadisoebroto, Suprihanto Notodarmojo

Makara Journal of Technology

The Effects of Influent Debit on Hydrodynamic Characteristic of Bojongsoang Facultative Pond: Without Wind Effects. The performance of facultative pond in Bojongsoang WWTP have reported to be unstable. One of the cause of the unstable performance is the hydrodynamic characteristics that not met the criterion. The improper hydrodynamic characteristics are included the existence of dead-zone, the short-circuiting, and the turbulence due to eddy current. The study was to analyze the effect of the influent debit variation on the hydrodynamic characteristics of the pond using mathematical model. The two-dimensional hydrodynamic model was built from two hydrodynamic equations which are continuity and …

Fuel Injection System For One Cylinder Motor Cycle Engine, Bambang Sugiarto

Makara Journal of Technology

Fuel Injection System for One Cylinder Motor Cycle Engine. Fuel injection has been developed for many years. But its common application is limited on car’s engine. With many reason fuel injection systems in motorcycle one cylinder engine has not been widely used yet. Fuel Injection System allows the amount of fuel, injected to be controlled appropriate to engine parameters such as engine speed, amount of air inducted to cylinder, temperature, for each cycle, over the entire engine operating conditions. This fuel injection research is done to find out the Volumetric Efficiency of the intake manifold system, the amount of fuel …

Influence Of Connection Placement To The Behavior Of Precast Concrete Exterior Beam-Column Joint, Elly Tjahjono, Heru Purnomo

Makara Journal of Technology

Influence of Connection Placement to the Behavior of Precast Concrete Exterior Beam-Column Joint. This paper presents an experimental study on the influence of connection placement to the behaviour of exterior beamcolumn joint of precast concrete structure under semi cyclic loading. Four half-scale beam-column specimens were investigated. Three beam-columns were jointed through connection that are placed in beam-column joint region and the forth is connected at the plastic hinge potensial region of the beam. Crack patterns, strength, stiffness and ductility of the test specimens have been evaluated. The test result indicated that all beam-column specimens show good ductility behavior.

Modelling And Simulation Of Packed Bed Catalytic Converter For Oxidation Of Soot In Diesel Powered Vehicles Flue Gas, Mohammad Nasikin, Praswasti P.D.K. Wulan, Vita Andrianty

Makara Journal of Technology

Modelling and Simulation of Packed Bed Catalytic Converter for Oxidation of Soot in Diesel Powered Vehicles Flue Gas. Diesel vehicle is used in Indonesia in very big number. This vehicle exhausts pollutants especially diesel soot that can be reduces by using a catalytic converter to convert the soot to CO2. To obtain the optimal dimension of catalytic converter it is needed a model that can represent the profile of soot weight, temperature and pressure along the catalytic converter. In this study, a model is developed for packed bed catalytic converter in an adiabatic condition based on a kinetic study that …

Optic Properties On Aggase2 Polycristal Fabrication, A. Harsono Soepardjo, I Dewa Made Janusetiawan

Makara Journal of Technology

Optic Properties on AgGaSe2 Polycristal Fabrication. Polycristal AgGaSe2, is compound (I-III-VI2) a semiconductor as basic material for thin film for solar cell. Polycristal was succesfully grown using Bridgmann Method, heated on sequential temperature treatment until 850°C and cooled down slowly until room temperature. Results observed were in the form of ingot (bars) with more or less 3 cm length and 13 mm in diameter. By using X-Ray Fefraction, composition obtained of each element (weight %) was Ag = 29,3996 %, Ga = 36,8123 % and Se = 30,29 % while using X-Ray Difraction lattice parameter obtained/calculated a = 4,4112 Å, …

2004 Fall Student Seminar, Matt Dekam, Chris Wiesehan, Jason Flietstra, Jeremy Hanson, Brian Katerberg, Kevin Palmer, Aaron Svacha, Aaron Buys, Josh Blocker, Matt Vredevoogd, Andrew Huisjen, Thomas Totoe, Andy Vandermoren, Chris Vanroekel, Terry Austen, Kristin De Groot, Matt Ooms, Andy Van Noord, Kurt Koubal, Dan Kuiper, Andy Wermel, Ryan Dewall, Eddie Lucas, Dawn Svenkeson

ENGR 333

File for student presentation, given by students in the Fall 2004 class of ENGR333.

Carbon Nanotube Based Chemical And Biological Sensors, Srikanth Singamaneni

Masters Theses

Carbon nanotubes are among those wonderful molecules man has discovered by chance. Carbon nanotubes are sheets of graphite rolled up to form seamless cylinders. Their outstanding electrical, mechanical and thermal properties form the inspiration behind this work. This work investigates the possible application of carbon nanotubes as biological sensors for the detection of various biomolecules like Streptavidin and Mouse monoclonal Immunoglobulin-G. Electrical conductance changes of Carbon nanotubes for exposure to alcohol vapors were studied. This thesis demonstrates that these quantum wires can form highly sensitive biological and chemical sensors at molecular level. Although the main focus of the-research was chemical …

Feature Detection Using Linear Structure Modeling And Pca, Kawshif Muhammed Riaz Ahmed

Masters Theses

An algorithm to extract features from digital images such as cracks in concrete bridges for automated inspection is developed. The algorithm is based on the use of Principal Component Analysis (PCA). In general, PCA is used to reduce the dimensionality of a data set that consists of a large number of interrelated variables while retaining the variation present in the original data set. This ability of PCA will be used in this project to identify clusters using two training sets of images. Linear structure modeling is used to emphasize the image features (cracks) prior to applying PCA. Whole images processing …

Acoustic Wave Based Biosensor, Aditya A. Vijh

Masters Theses

Quartz Crystal Microbalances (QCMs) have been widely used for detection of various chemical and biological species in liquid media. In this work an improved binding of Protein A and IgG molecules on QCM biosensors by modifying the gold surface of the quartz crystal with an ultra thin polystyrene film followed by an acidic treatment has been reported. Protein A and IgG immobilizations on quartz crystals with the polystyrene film represented a 65% increase and a 40% increase respectively when compared to immobilization done directly onto the crystals. Atomic Force Microscopy (AFM) has been used to investigate and study the biomolecular …

Evaluating The Repair Of System-On-Chip (Soc) Using Connectivity, Minsu Choi, Nohpill Park, Vincenzo Piuri, Fabrizio Lombardi

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a new model for analyzing the repairability of reconfigurable system-on-chip (RSoC) instrumentation with the repair process. It exploits the connectivity of the interconnected cores in which unreliability factors due to both neighboring cores and the interconnect structure are taken into account. Based on the connectivity, two RSoC repair scheduling strategies, Minimum Number of Interconnections First (I-MIN) and Minimum Number of Neighboring Cores First (C-MIN), are proposed. Two other scheduling strategies, Maximum Number of Interconnections First (I-MAX) and Maximum Number of Neighboring cores First (C-MAX), are also introduced and analyzed to further explore the impact of connectivity-based repair …

Consistency Results For The Roc Curves Of Fused Classifiers, Kristopher S. Bjerkaas

Theses and Dissertations

The U.S. Air Force is researching the fusion of multiple classifiers. Given a finite collection of classifiers to be fused, one seeks a new classifier with improved performance. An established performance quantifier is the Receiver Operating Characteristic (ROC) curve, which allows one to view the probability of detection versus the probability of false alarm in one graph. Previous research shows that one does not have to perform tests to determine the ROC curve of this new fused classifier. If the ROC curve for each individual classifier has been determined, then formulas for the ROC curve of the fused classifier exist …

Cross-Layer Design Of A Dynamic Resource Allocation Control For The Next Multimedia Wireless Generation 1xev-Dv Systems, Mohamed Bourouha

Masters Theses

1xEV-DV has been proposed as one of the standards of the next MultimediaWire- less Generation (MWG) systems, which adopts new techniques to enhance wireless data Quality of Service (QoS). Despite the recent research efforts in mapping QoS pa- rameters cross the different layers, there is still no cross layer QoS design that focuses in providing QoS assurances in the 1xEV-DV. Moreover, many possible combinations of resource parameters have been specified in the current standard. However, there are no specifications about the dynamic resource allocation. In this thesis, a suite of Cross Layer Multiuser Diversity Modules are proposed. These modules include …

Analysis And Control Of A Buck Dc-Dc Converter Operating With Constant Power Load In Sea And Undersea Vehicles, Claudio Rivetta, Ali Emadi, Geoffrey A. Williamson, Ranjit Jayabalan, Babak Fahimi

Electrical and Computer Engineering Faculty Research & Creative Works

Power electronics based zonal DC power distribution systems are being considered for sea and undersea vehicles. the stability of the DC power electronics-based power distribution systems is a significant design consideration because of the potential for negative impedance induced instabilities. in this paper, dynamic properties and control of a buck converter feeding a downstream DC-DC converter are studied. the controller in this system combines an instantaneous current feedback loop using hysteresis with a proportional-integral algorithm to regulate the output voltage of the converter. based on a large-signal averaged model of the converter, the stability-in-large around the operation point is presented. …

Modeling Of Multi-Converter More Electric Ship Power Systems Using The Generalized State Space Averaging Method, Madan M. Jalla, Ali Emadi, Geoffrey A. Williamson, Babak Fahimi

Electrical and Computer Engineering Faculty Research & Creative Works

based on the more electric ship (MES) concept, conventional mechanical, hydraulic, and pneumatic power transfer systems are replaced by electrical systems in different sea vehicles. Considering different levels of power requirements of various electrical loads and for the achievement of compact, light, safe, and efficient power supplies, implementation of multi-converter power electronics-based power systems is the most feasible option in the development of advanced navy vehicles. This paper presents a modular approach for the modeling and simulation of multiconverter MES power systems based on the generalized state space averaging method. MES power systems may consist of many individual converters connected …

Real Time State Estimation Of Multi-Converter More Electric Ship Power Systems Using The Generalized State Space Averaging Method, Madan M. Jalla, Ali Emadi, Geoffrey A. Williamson, Babak Fahimi

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a real time state estimation algorithm for control and security maintenance of multi-converter MES power electronic systems. Estimation of the state variables of the system includes the effects of ripples and converter switching actions. the proposed state estimator is based on the Weighted Least Squares (WLS) approach. Generalized state space averaging technique in which we consider the DC value of the state variables, and their harmonics is used to model DC/DC converters for the state estimator. in this paper, after introducing the proposed approach and the concept of security and control assessments, results of applying the proposed …

Rf Cmos Receiver Front-End Using A Reflex Amplifier, Radovan Kuzet

Theses and Dissertations - UTB/UTPA

A concept for an RF-CMOS receiver with reflex topology is developed and tested, using OrCad as the primary design and simulation tool. The main idea of the reflex topology is to reuse a Low Noise Amplifier (LNA) stage in the circuit and thus eliminate one high power consumption stage. A Gilbert cell is used for down conversion, with the benefit of low noise and low power while maintaining gain. A set of passive diplexers allows reuse of the LNA at the RF and IF. The complete circuit was simulated using 0.18 micron and 0.5 micron AMI technology. Parameters for the …

Ultra Wide Band Signal Modeling For Radar Receiver Characterization, Robert J. Backscheider

Theses and Dissertations

Results for modeling, simulation, and analysis of interference effects that modern wideband signals have on existing narrowband radar system performance are presented. In particular, radar detection performance is characterized using a basic radar receiver model and operational parameters consistent with those of the ARSR-4 air route surveillance radar. Two modern wideband signals (interferers) are addressed in this work, including the GPS military signal (M-Code signal) and a direct sequence ultra wideband (DS-UWB) waveform meeting outdoor emission restrictions imposed by the Federal Communications Commission (FCC). Interference effects are characterized for an unmodulated sinusoidal pulse as well as linear frequency modulated (LFM) …

Trade Space Analysis Of Antenna Array Architecture Using System Modeling Tools, Eugene Johnson

Theses and Dissertations

This trade study has two objectives. The first provides a trade space analysis of differing array architectures and associated radio frequency components using system-modeling tools. The second objective develops system modeling tools aiding similar analysis by other users. These objectives were accomplished by evaluating a selected group of output parameters to include overall system cost, mass, and power consumption, as well as the minimum detectable input level, system spurious free dynamic range, and selected beam spoilage parameters caused by the use of discrete phase shifters. A fixed number of designs were evaluated using simulation. The evaluation process examined input parameter …