Electrical and Computer Engineering Commons^™

Reducing Range Anxiety Through Predictive Modeling Of Ev Battery Degradation, Caleb Thornsbury, Christian Castro, Bivin Sadler

SMU Data Science Review

Electric Vehicles (EV) range anxiety remains one of the top barriers for broader adoption. Range anxiety can be attributed to battery pack age and degradation over time. This paper plans to explore how to address this issue by creating a machine learning model that can predict degradation based on usage, temperature, battery chemistry, charging habits and exploring whether other factors tie into range degradation. This research will be using real world charging data along with lab tested chemistry data to build a model that can be chemistry specific for degradation. This paper will help perspective used-EV buyers learn about battery …

Mathematical Modeling Of The Atmospheric Water Harvesting Process Using Cfd, Jasur Esirgapovich Safarov, Shakhnoza Abduvaxitovna Shaxnoza, Doston Ishmuxammat Ugli Samandarov, Azamat Bakir Ugli Usenov, Shahzod Faxriddin Ugli Dostqobilov

Technical science and innovation

This article presents the physical principles of Atmospheric Water Harvesting (AWH) technologies, including spectral radiation balance, air-sorbent interactions, thermodynamic constraints, and computational fluid dynamics (CFD) modeling approaches. The study provides models of water condensation, adsorption-desorption processes, and energy consumption. In addition, a detailed thermodynamic analysis was carried out to determine the partial vapor pressure, cooling demand, and theoretical energy limits of water extraction. The adsorption process is described using Langmuir isotherms, while desorption is represented through a kinetic model dependent on activation energy. To analyze the coupled processes of airflow, mass transfer, and heat transport, CFD models based on the …

Improved Electric Load Modeling Of Residential Air Conditioning, Julius Johnson

UNLV Theses, Dissertations, Professional Papers, and Capstones

The recent increase in energy production from renewable resource introduces a new challenge in managing and maintaining balance between electricity supply and demand, due to uncertainty and variability of wind speed and solar irradiance. To address this growing problem, demand-side management, such as Demand Response (DR) programs, is employed to adjust power consumption. Residential air conditioners (ACs) are the most suitable candidates for DR, due to their intensive power consumption and inherent thermal inertia that allows flexibility in their operations (by adjusting their set-point temperatures) without sacrificing customer comfort. Most prior research on AC load models assumes that such a …

Methodology Of Automated Control Of Situations In Structurally Complex Systems With Recycled Flows, Khusan Zokirovich Igamberdiev Academician, Madina Mirxalilovma Fozilova

Chemical Technology, Control and Management

This article discusses the methodology of automated management of situations in structurally complex systems with recycled flows. The need to develop a correct model for effectively controlling such systems based on scientific principles of analysis and decision-making is substantiated. Particular attention is paid to modeling, optimizing, and using digital technologies, including artificial intelligence, to improve the accuracy and efficiency of management decisions. The principles of decomposition, multi-criteria optimization, and linguistic models of fuzzy correspondence are described, which can be used in conditions of uncertainty and complexity of industrial facilities.

Lagrange Multipliers As A Metric For Early-Stage Shipboard Power System Design, Magdalen A. Barnes

Theses and Dissertations--Electrical and Computer Engineering

Integrated power systems are essential in the operation of electric ships and must function under a diverse range of conditions. In addition to routine operation, ships should be prepared to respond to challenging events that require significant amounts of power. Demanding scenarios, coupled with complex and interconnected power systems, present challenging issues. The power and energy ratings of equipment are crucial factors in the operational success of the ship; however, to meet economic constraints, balance between performance and cost must be upheld. Details regarding equipment models and specifications are typically unavailable during early-stage design. Power system modeling and simulation can …

Characterization And Modeling Of Polyphase Machines And Power Conditioning Components, Nathan Lockhart

Electrical Engineering Dissertations - Archive

Microgrid power configurations have become increasingly prevalent in recent power systems due to the rise of power electronic energy generation, energy storage, and the many diverse electrical demands. Microgrids offer numerous advantages over traditional power electronic networks, which rely on large rotating generators to supply power over extensive distances to multiple users. Remote power grids are particularly beneficial for smaller networks that may be isolated or have unique power requirements, often incorporating energy storage to enhance operational flexibility. Advances in power electronics, such as medium voltage DC distribution, are enhancing the reliability, redundancy, and integration capabilities of isolated microgrids.

To …

Tracking Control Of A String Actuated Soft Trunk Robot Using State-Space Modeling, Jacob Trivisonno

Open Access Master's Theses

Soft robots, primarily composed of compliant materials, exhibit highly complex and nonlinear dynamics, making precise control a significant challenge. Traditional control methods often struggle with these complexities, requiring more advanced and data-driven methods. In our previous work, “Automatic Control of a Soft Trunk Robot Actuated by Strings” [1], a proportional controller was developed to drive the steady-state tracking error to zero. While this method was effective, it required time-consuming manual tuning and was not easily adaptable to physical modifications of the robot.

To address these limitations, this research implements gain-scheduled feedback control with state-space models calculated through a multiple linear …

Differential Via Modeling Using Multilayer Perceptron-Sequential (Mlp-Seq) Neural Network, Hyunwook Park, Shruti Sawant, Bandi Sathvika, Arun Chada, Soumya Singh, Seema Pk, Taein Shin, Haeseok Suh, Junyong Park, Bhyrav Mutnury, Donghyun Kim

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, an encoder-decoder structured multi-layer perceptron-sequential (MLP-SEQ) networks are proposed to model high-speed differential vias for estimating differential insertion loss (IL) and return loss (RL). Sequential neural networks including recurrent neural network (RNN), long short-term memory (LSTM), and gated recurrent unit (GRU) are introduced as the decoder NN to treat frequency responses as sequences. The proposed models are validated by finite element method (FEM) simulation results. The accuracy and training times of MLP-RNN, MLP-LSTM, and MLP-GRU models are compared and analyzed. Based on the MLP-LSTM model, various design of experiments (DoEs) are conducted to enhance the reproducibility and …

High-Frequency Accurate Dual-Side Equivalent Circuit Model For Transformers, Reza Vahdani, Junyong Park, Manish Kizhakkeveettil Mathew, Zhekun Peng, Chiuk Song, Hyucksu Kweon, Jiang Lijun, Donghyun Kim

Electrical and Computer Engineering Faculty Research & Creative Works

This study delves into the modeling of a transformer in the frequency range of 100 KHz to 30 MHZ. The coupling coefficient was considered as a function of leakage and self-inductance and incorporated in the optimization process of transformer modeling in the proposed method. The equivalent circuit focused on the critical aspects of leakage inductance, parasitic capacitance, and winding effects. At first, the winding effect of an air-core inductor over wide frequency range with both single-layer and double-layer windings was shown. Then an equivalent circuit was proposed to model a transformer over this frequency range. The comparison between the measured …

Study Of The Application Of Blender For Simulation Of A Closed-Loop Image-Based Greenhouse Supplemental Lighting Control, Kip Nieman, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Image-based control and sensing has been applied in a wide variety of next generation manufacturing fields. Utilizing methods of simulating closed-loop image-based control may be advantageous for improving control performance and design without the need for an experimental setup. One software capable of these simulations is the open-source 3D modeling software Blender, which has many capabilities aided by a Python API. This work explores the use of Blender as an image-based control test bed, where both the process and the controller are simulated, in the context of a greenhouse supplemental lighting control system.

Harmonic Flow Modeling And Analysis Of A Green Hybrid Ac/Dc Seaport Power System, Krishan Kaushal Ram, Taufik, Helen Yu, Siddharth Vyas

Master's Theses

This thesis aims to design and develop a model for a proposed Green Seaport power system and perform harmonic analysis. The model was developed using MATLAB Simulink and tests were performed by dividing the system into several Battery Energy Storage System (BESS) operating modes such as simultaneous charging and discharging, simultaneous charging, and simultaneous discharging. For each mode, BESS state of charge and other factors such as solar irradiance for the PV system, load levels and power factor were varied to observe the impact on system’s voltage Total Harmonic Distortion (THD) level and current Total Demand Distortion (TDD). 62 separate …

Optimization Of Human Interactions In The College Campus Model Via Simio Integration, Benjamin E. Chaback

Doctoral Dissertations and Master's Theses

College campuses are a significant part of life in some cities. Many students each year attend university, pursuing additional knowledge from faculty members. Both staff and faculty members rely on these students to have successful jobs and to ensure the university functions. Yet recently, more and more students are attending, leading to overcrowding, lower admission rates, and difficulty getting into good programs. Previous work exists on qualitative student affairs and quantitative retention data, yet little on using simulations to model this problem. This work aimed to (a) Determine the ability to successfully model human interactions/people flow on a college campus, …

Estimating Stimulated Raman Scattering Noise In Cwdm O-Band Channels Induced By Two Classical Dwdm Sources In A Quantum Network Fiber Segment, Kurt T. Spranger Ii

Theses and Dissertations

The purpose of this research is to estimate the stimulated Raman scattering noise induced in CWDM O-band channels by two DWDM classical sources in a terrestrial quantum optical network containing classical and quantum optical signal coexistence in the same fiber segment. A use case is defined and analyzed which extracts a single fiber segment from a notional Bell state measurement found in a notional terrestrial quantum network. A stimulated Raman scattering noise model is employed in a Python simulation to estimate and rank-order the five O-band channels with the least amount of relative induced stimulated Raman scattering noise when given …

Controller Area Network With Flexible Data Rate (Can Fd) Eye Diagram Prediction, Junyong Park, Manho Lee, Shinyoung Park, Jonghoon Kim, Joungho Kim, Donghyun Kim

Electrical and Computer Engineering Faculty Research & Creative Works

A method for predicting the eye diagram for a controller area network with a flexible data rate (CAN FD) is proposed in this article. A CAN FD changes a data rate according to the status to overcome the limitation of latency. In other words, when data to be transmitted are accumulated, the CAN FD increases the data rate up to 5 Mb/s. The CAN FD has a bus topology consisting of multiple electronic control units, which results in a significant amount of signal reflection. Thus, the above causes the signal integrity analysis uncertain. To avoid this, this article proposes a …

Dynamic Modeling And Control Of A Solid State Semiconductor-Based Transformer, Microgrid And Storage Systems, Rubén Darío Viñán-Velasco

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Smart Grids are power grid models designed with the idea of including the growing new technologies, from generation to storage devices, and are a response to the growing demands from consumers and the presence of electronic components being commonplace in the modern devices. The design requires a dynamic alternative in order to build an independent grid that can also work in cooperation with other micro-grids and the power grid in an integrated way. Smart-grids present several advantages over the traditional power grid scheme, but the economic costs of the components required to implement smart-grids is currently a great limitation. This …

Real-Time Cyber-Power Testbed Enhancement And Synchrophasor Data Generation For Anomaly Detection Using Physics-Informed Machine Learning, Vasavi Sivaramakrishnan

Graduate Theses, Dissertations, and Problem Reports (ETD)

Advanced sensing and automation are essential to managing the evolving electric power system with tight coupling of information and power system layer. However, this increasing number of cyber-physical devices brings vulnerabilities from cyber threats and extreme weather events can endanger the power system on a physical level as well. Advanced monitoring and control algorithms with human operators in the loop are needed to enable power system resiliency despite these increasing threats. These advanced algorithms require validation using a realistic test system that mimics real-world scenarios.

This work focuses on a) developing a realistic real-time cyber-power testbed with hardware-in-the-loop to generate …

Modeling And Dynamic Correction Of The Thermal Radiation Fluxes Measuring System, Olexander Alekseevich Sytnik, Fatima Mirazizovna Sagatova

Chemical Technology, Control and Management

Temperature measurements are currently an integral part of modern production, in particular, energy, aviation, instrumentation, etc. Therefore, the need to improve the accuracy of measurement, control and regulation of temperature largely determines the technical and economic efficiency of production. The development of reliable methods for temperature control under various conditions and the creation of specific devices is one of the most important tasks of modern instrumentation. The article deals with the issues of solving the problems of modeling and correcting the dynamic characteristics of a system for measuring thermal radiation fluxes using the integral method of signal recovery. For computer …

Model-Driven Analysis Of Ecg Using Reinforcement Learning, Christian O'Reilly, Sai Durga Rithvik Oruganti, Deepa Tilwani, Jessica Bradshaw

Publications

Modeling is essential to better understand the generative mechanisms responsible for experimental observations gathered from complex systems. In this work, we are using such an approach to analyze the electrocardiogram (ECG). We present a systematic framework to decompose ECG signals into sums of overlapping lognormal components. We use reinforcement learning to train a deep neural network to estimate the modeling parameters from an ECG recorded in babies from 1 to 24 months of age. We demonstrate this model-driven approach by showing how the extracted parameters vary with age. From the 751,510 PQRST complexes modeled, 82.7% provided a signal-to-noise ratio that …

Modeling, Simulation And Control Of Microrobots For The Microfactory., Zhong Yang

Electronic Theses and Dissertations

Future assembly technologies will involve higher levels of automation in order to satisfy increased microscale or nanoscale precision requirements. Traditionally, assembly using a top-down robotic approach has been well-studied and applied to the microelectronics and MEMS industries, but less so in nanotechnology. With the boom of nanotechnology since the 1990s, newly designed products with new materials, coatings, and nanoparticles are gradually entering everyone’s lives, while the industry has grown into a billion-dollar volume worldwide. Traditionally, nanotechnology products are assembled using bottom-up methods, such as self-assembly, rather than top-down robotic assembly. This is due to considerations of volume handling of large …

Mathematical Description And Algorithm For Solving The Model Of The Ionite Regeneration Process In The Ion Exchange Method Of Water Softening, Djalolitdin Paxritdinovich Mukhitdinov, Nilufar Abdusami Qizi Yunusova

Chemical Technology, Control and Management

Based on the modern representation of the water softening process by the ion exchange method, modeling was carried out, an algorithm was developed and the ionite regeneration process was calculated in a water softening plant with a fixed ionite layer. To solve the system of equations of the model, special, but simple enough for use in engineering calculations, techniques and methods have been developed and applied. The constructed model and its solution algorithm can be used to predict the process of ionite regeneration in an ion exchange apparatus. It can also be used to calculate the time of the ionite …

Modeling And Adjustment Of A Fuzzy Controller In A Bioreactor Control System, Mahmudov Giyosjon Baqoyevich

Chemical Technology, Control and Management

The article describes the modeling and configuration of a fuzzy controller for the control system of the bacterial oxidation of hard-to-enrich gold-bearing sulfide ores. The simulated logical fuzzy controller allows you to save the consumption of refrigerant water consumed in the process by 4,3%, using it to control the process of bacterial oxidation.

Securing The Transportation Of Tomorrow: Enabling Self-Healing Intelligent Transportation, Elanor Jackson, Sahra Sedigh Sarvestani

Electrical and Computer Engineering Faculty Research & Creative Works

The safety of autonomous vehicles relies on dependable and secure infrastructure for intelligent transportation. The doctoral research described in this paper aims to enable self-healing and survivability of the intelligent transportation systems required for autonomous vehicles (AV-ITS). The proposed approach is comprised of four major elements: qualitative and quantitative modeling of the AV-ITS, stochastic analysis to capture and quantify interdependencies, mitigation of disruptions, and validation of efficacy of the self-healing process. This paper describes the overall methodology and presents preliminary results, including an agent-based model for detection of and recovery from disruptions to the AV-ITS.

Characterization And Modeling Of Sparkless Discharge To A Touch Screen Display, Jianchi Zhou, Cheung Wei Lam, Zhekun Peng, Daryl G. Beetner, David Pommerenke

Electrical and Computer Engineering Faculty Research & Creative Works

Although Corona Discharge to a Touchscreen Display is Not Associated with the Spark, It Could Cause Soft and Hard Failures Due to Electromagnetic Coupling to Sensitive Electronics Beneath the Glass. Experimental Data Were Obtained to Characterize These Sparkless Discharges and an Equivalent Circuit Model Was Constructed to Predict the Resulting Coupling to Touchscreen Electronics. Measurements and Simulation Indicate that a Thinner Glass and a Higher Touchscreen Indium-Tin-Oxide (ITO) Sense Trace Impedance Both Lead to Higher ESD Risk by Delivering Higher Energy into the Sensing IC. a CST Co-Simulation Model is Proposed and is Shown to Model the Displacement Current Accurately. …

Modeling Of Quad-Station Module Cluster Tools Using Petri Nets, Aung Nay

Theses

The semiconductor industry is highly competitive, and with the recent chip shortage, the throughput of wafers has become more important than ever. One of the tools that the industry has deployed is to use of quad-station modules instead of the traditional single-station modules that allow for higher throughput and better wafer consistency by processing multiple wafers at the same time and distributing work. The industry trend is to use multiple transfer chamber robots to stack the quad-station modules in a series, particularly for etch products. In this work, the quad-station cluster tool wafer movement is modeled by using Petri net …

Closed Form Implicitly Integrated Models For Computationally Efficient Simulation Of Power Electronics, Andrew Wunderlich

Theses and Dissertations

This work describes novel closed-form, implicitly integrated (CF-implicit) models of switched-mode power converters which feature implicit integration but require no iterative numerical solving algorithm for evaluation because they are explicitly solved prior to model execution. The derived models capture the large-signal dynamic behavior of the power converters, so their use and accuracy are not limited to any one set of operating conditions. These models can be implemented in any computational environment, including directly on an existing embedded controller as a digital twin. Since no iterative solver is required, the models are highly computationally efficient and have a very predictable worst-case …

Verification And Validation Of Power Converters For Use In Future Power System Architectures, Alexander Johnston

Electrical Engineering Dissertations - Archive

Electronics are more widely penetrating almost every area of society and as they do, the demand to supply them with regulated power increases considerably. The scale of the electronic power distribution systems needed ranges from those in very small handheld consumer electronic devices all the way up to those needed in large buildings, ships, and cities. The energy supplied within these power distribution systems can come from many different generation sources that operate either individually or simultaneously. When power electronics are controlled properly, simultaneous generation sources can be employed in a way that optimizes them according to the user’s desired …

Evaluation And Modeling Of Power System Components, Zachary Ryan Bailey

Electrical Engineering Dissertations - Archive

Future power system architectures will rely on a combination of rotating machines, power electronic devices, and energy storage. While it is possible to procure each component separately and conduct studies incorporating these devices into a system, increases in computing power and advanced computer modeling software have expanded the opportunity for research to be conducted on power system architectures without the need for actual hardware. This provides flexibility by allowing the user to design models of individual components that can then be integrated together or effortlessly interchanged depending on the function or testbed design that is being studied. The UTA IDEAL …

Integrating Fire Responses To Combat Wildfires, Jonathan Leonard Badal

Electrical Engineering

Each year wildfires cause significant loss of property, worsen people’s health, and destroy multiple ecosystems. On average, a wildfire season costs anywhere from 7.6-62.8 billion dollars due to fire containment, repair, and restoration [1]. It can take decades to recover from the crippling loss of land and take even longer to fully restore it. However, with the implementation of a robust early detection system, these losses can be significantly reduced. The current process for identifying wildfires involves visual identification, phone call alerts, and media tools primarily driven by park rangers and public reporting. Unfortunately, this system is not preventative and …

Characterization And Modeling Of Esd Events, Risk And Protection, Jianchi Zhou

Doctoral Dissertations

“The ESD (Electrostatic discharge) failures have been raising critical reliability problems in electronic devices design. However, not all the ESD scenarios have been specified by the IEC standard and the characterizations of the ESD risk for different scenarios are essential to evaluate the ESD robustness of the devices in the real word.

The insulation of plastic enclosures provides protection against ESD to the electronic system inside. However, seams between plastic parts are often unavoidable. Different plastic arrangements are constructed to investigate the spark length and current derivatives and to understand the ESD spark behavior for geometries having spark lengths longer …

Selective Neural Stimulation By Leveraging Electrophysiological Diversity And Using Alternative Stimulus Waveforms, Bemin Ghobreal

Dissertations

Efforts on finding the principle mechanism for selective neural stimulation have concentrated on segregating the neurons based on their size and other geometric factors. However, neuronal subtypes found in different parts of the nervous system also differ in their electrophysiological properties. The primary objective of this study is to investigate the feasibility of selective activation of neurons by leveraging the diversity seen in passive and active membrane properties.

Using both a local membrane model and an axon model based on the CRRSS, the diversity of electrophysiological properties is simulated by varying four model parameters (membrane leakage-Gleak and capacitance-Cm, temperature coefficient-Ktemp, …