Electrical and Computer Engineering Commons^™

Low-Power, Event-Driven System On A Chip For Charge Pulse Processing Applications, Joseph A. Schmitz

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This dissertation presents an electronic architecture and methodology capable of processing charge pulses generated by a range of sensors, including radiation detectors and tactile synthetic skin. These sensors output a charge signal proportional to the input stimulus, which is processed electronically in both the analog and digital domains. The presented work implements this functionality using an event-driven methodology, which greatly reduces power consumption compared to standard implementations. This enables new application areas that require a long operating time or compact physical dimensions, which would not otherwise be possible. The architecture is designed, fabricated, and tested in the aforementioned applications to …

Finding Ideal Parameters For Recycled Material Fused Particle Fabrication-Based 3d Printing Using An Open Source Software Implementation Of Particle Swarm Optimization, Shane Oberloier, Nicholas G. Whisman, Joshua M. Pearce

Michigan Tech Publications

As additive manufacturing rapidly expands the number of materials including waste plastics and composites, there is an urgent need to reduce the experimental time needed to identify optimized printing parameters for novel materials. Computational intelligence (CI) in general and particle swarm optimization (PSO) algorithms in particular have been shown to accelerate finding optimal printing parameters. Unfortunately, the implementation of CI has been prohibitively complex for noncomputer scientists. To overcome these limitations, this article develops, tests, and validates PSO Experimenter, an easy-to-use open-source platform based around the PSO algorithm and applies it to optimizing recycled materials. Specifically, PSO Experimenter is used …

An Improved Genetic Algorithm Based Fractional Open Circuit Voltage Mppt For Solar Pv Systems, Aakash Hassan, Octavian Bass, Mohammad A. S. Masoum

Research outputs 2022 to 2026

To extract the maximum power from solar PV, maximum power point tracking (MPPT) controllers are needed to operate the PV arrays at their maximum power point under varying environmental conditions. Fractional Open Circuit Voltage (FOCV) is a simple, cost-effective, and easy to implement MPPT technique. However, it suffers from the discontinuous power supply and low tracking efficiency. To overcome these drawbacks, a new hybrid MPPT technique based on the Genetic Algorithm (GA) and FOCV is proposed. The proposed technique is based on a single decision variable, reducing the complexity and convergence time of the algorithm. MATLAB/Simulink is used to test …

On The Effect Of Emotion Identification From Limited Translated Text Samples Using Computational Intelligence, Madiha Tahir, Zahid Halim, Muhmmad Waqas, Shanshan Tu

Research outputs 2022 to 2026

Emotion identification from text data has recently gained focus of the research community. This has multiple utilities in an assortment of domains. Many times, the original text is written in a different language and the end-user translates it to her native language using online utilities. Therefore, this paper presents a framework to detect emotions on translated text data in four different languages. The source language is English, whereas the four target languages include Chinese, French, German, and Spanish. Computational intelligence (CI) techniques are applied to extract features, dimensionality reduction, and classification of data into five basic classes of emotions. Results …

Numerical Investigation Of Lead Free Cs2tibr6 Based Perovskite Solar Cell With Optimal Selection Of Electron And Hole Transport Layer Through Scaps-1d Simulation, Hironmoy Karmaker, Ayesha Siddique, Barun K. Das

Research outputs 2022 to 2026

Halide-based perovskite has several advantages, including high efficiency, ease of manufacture, and low cost. In general, hazardous lead (Pb) is used in perovskite solar cells as an absorber layer, while polymer, which is unstable in nature used as the electron/hole transport layer. Despite its appealing characteristics, the device uses of lead and degradable components must be addressed. Lead-free titanium-based inorganic perovskite solar cells (PSCs) have drawn strong scientific interest in recent years in order to reduce the possibly detrimental effects of lead on the environment. Titanium is non-toxic, robust, inexpensive, and widely available when compared to other elements. The performance …

A Modular Framework For Surface-Embedded Actuation And Optical Sensing In Soft Robots., Paul Bupe Jr

Electronic Theses and Dissertations

This dissertation explores the development and integration of modular technologies in soft robotics, with a focus on the OptiGap sensor system. OptiGap serves as a simple, flexible, cost-effective solution for real-time sensing of bending and deformation, validated through simulation and experimentation. Working as part of an emerging category of soft robotics called Soft, Curved, Reconfigurable, Anisotropic Mechanisms, or SCRAMs, this research also introduces the Thermally-Activated SCRAM Limb (TASL) technology, which employs shape-memory alloy (SMA) wire embedded in curved sheets for surface actuation and served as the initial inspiration for OptiGap. In addition, the EneGate system is presented as a complementary …

Renovating The Ipmu Via Internet Of Things For Pollutant Emission Estimations In Poultry Facilities, Joshua Dotto

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The emissions of ammonia (NH₃), particulate matter (PM_2.5), and carbon dioxide (CO₂) are major concerns in poultry facilities. They can pose environmental concerns and nuances. Robust and affordable measurement systems are needed to accurately measure in-barn concentrations and quantify the emissions.

The Intelligent Portable Monitoring Unit (iPMU or PMU3) developed in 2016 was reconstructed into PMU4 to include upgraded NH₃ and PM_2.5 sensors and wireless connectivity for a low-cost, robust, and accurate air quality monitoring device with contactless data transfer using the concept of Internet of Things (IoT). In addition, a user-friendly …

Development Of Metaheuristic Algorithms For The Efficient Allocation Of Power Flow Control Devices, Eduardo Jose Castillo Fatule

Open Access Theses & Dissertations

No abstract provided.

Development Of A 3d Printed Conductive Biopolymer For Cardiac Tissue Engineering, Britanny Lizeth Stark

Open Access Theses & Dissertations

Cardiovascular disease (CVD) is the leading cause of death in the US, with approximately 859,000 deaths each year. The major contributor to CVD is Acute Myocardial Infarction (AMI), which causes the death of approximately 25% of the cardiomyocytes present in the left ventricle of the heart. After AMI, the adult human heart has a very limited regenerative capacity. Moreover, the electrical propagation of the myocardium is severely disrupted, making the heart more susceptible to failure and patient death. However, current pharmacological treatments do not address the loss of cardiomyocytes and the disruption of electrical propagation in the heart. Tissue engineering …

Enhancing Power System Flexibility Through Efficient Integration Of Facts And Electric Vehicles, Izaz Zunnurain

Open Access Theses & Dissertations

The global transition towards a cleaner and sustainable energy landscape has led to the integration of renewable energy sources and electric vehicles (EVs) into the modern power system, along with their complexities. Due to the high penetration of renewable energy sources and rapid growth of EVs, the power grid often experiences congestion, increasing the overall operating cost of the power system and directly jeopardizing the power stability and quality of the grid. A flexible and resilient power infrastructure that can accommodate the intermittency of renewable energy sources and the adoption of EVs is very much required to ensure the reliability …

Graphene-Based Chemiresistor Sensors For Drinking Water Quality Monitoring, Mason Mcgarrity, Feng Zhao

Electrical and Computer Engineering Faculty Research & Creative Works

Monitoring the quality of drinking water is a crucial responsibility for all water infrastructure networks, as it guarantees access to clean water for the communities they serve. With water infrastructure deteriorating due to age and neglect, drinking water violations are on the rise in the US, underscoring the need for improved monitoring capabilities. Among the different sensor technologies, graphene-based Chemi resistors have emerged as a promising technology for water quality monitoring due to advantages such as simple design, sensitivity, and selectivity. This review paper provides an overview of recent advances in the development of graphene-based Chemi resistors for water quality …

Design Of A Low-Power Delay-Locked Loop-Based 8x Frequency Multiplier In 22 Nm Fdsoi, Naveed, Jeff Dix

Electrical Engineering Faculty Publications and Presentations

A low-power delay-locked loop (DLL)-based frequency multiplier is presented. The multiplier is designed in 22 nm FDSOI and achieves 8× multiplication. The proposed DLL uses a new simple duty cycle correction circuit and is XOR logic-based for frequency multiplication. Current starved delay cells are used to make the circuit power efficient. The circuit uses three 2× stages instead of an edge combiner to achieve 8× multiplication, thus requiring far less power and chip area as compared to conventional phase-locked loop (PLL) circuits. The proposed 8× multiplier occupies an active area of 0.09 mm2. The measurement result shows ultra-low power consumption …

Project Thetis: A Low-Cost, Low-Profile Inertial Data Logger, Braidan Duffy

Theses and Dissertations

This thesis details the design, testing, calibration, and verification of a nine degree of freedom inertial measurement data logger for use with floating bodies. The instrument was conceived to address limitations of equipment used in classes within the Ocean Engineering department at Florida Institute of Technology. By meeting with several stakeholders and end users, a series of stakeholder requirements, capabilities, and component-level requirements were de- veloped that informed the design constraints. There were several hardware iterations of the board, culminating in Revision F5 which was extensively tested and proven. The design was inspected after testing concluded to determine which capabilities …

Robust Uncertainty Estimation Framework In Deep Reinforcement Learning For Active Slam, Bryan Joseph Pedraza

Theses and Dissertations

Autonomous mobile robots are essential in various domains such as industry, manufacturing and healthcare. Navigating autonomously and avoiding obstacles are crucial tasks that involve localizing the robot to explore and map unknown environments without prior knowledge. Simultaneous localization and mapping (SLAM) present significant challenges. In this study, we introduce a new approach to address robust navigation and mapping of robot actions using Bayesian Actor-Critic (A2C) reinforcement learning. The A2C framework combines policy-based and value-based learning by dividing the model into two components: (1) the policy model (Actor) determines the actions based on the state, and (2) the value model (Critic) …

Robust And Uncertainty-Aware Image Classification Using Bayesian Vision Transformer Model, Fazlur Rahman Bin Karim

Theses and Dissertations

Transformer Neural Networks have emerged as the predominant architecture for addressing a wide range of Natural Language Processing (NLP) applications such as machine translation, speech recognition, sentiment analysis, text anomaly detection, etc. This noteworthy achievement of Transformer Neural Networks in the NLP field has sparked a growing interest in integrating and utilizing Transformer models in computer vision tasks. The Vision Transformer (ViT) model efficiently captures long-range dependencies by employing a self-attention mechanism to transform different image data into meaningful, significant representations. Recently, the Vision Transformer (ViT) has exhibited incredible performance in solving image classification problems by utilizing ViT models, thereby …

Electromagnetic Field Analysis, Materials Characterization, And Advanced Modeling Of Modern Guitar Pickups, Luis Alonso Villarreal

Theses and Dissertations

This Thesis establishes the foundations of modern guitar pickup theory, enhancing current pickup design by an increase in voltage output, reduction of DC resistance, and a reduction of production costs. This research investigates factors that have received insufficient attention, such as the performance of different magnetic materials, magnet geometry, bobbin geometry, metal effects, etc. An equation to calculate the output of guitar pickups is developed. Additionally, this work constructs a modern pickup using the techniques developed in this thesis incorporating theory and advanced modeling techniques to simulate changes in performance and interactions with different magnetic materials and geometries. The new …

Gpu Based Monte Carlo Estimation Of Eddy Current Losses In Electromagnetic Coil-Core System, Adwaith Ravichandran

Theses and Dissertations

A novel parallelizable probabilistic approach to model eddy currents in AC electromagnets is presented in this research. Consequently, power loss associated with the formation of these eddy currents is estimated and validated using experimental data. Furthermore, predicting the effect of ferromagnetic alternating field enhancement on power loss in the source excitation winding has been an active area of research. Unlike a stationary field, an alternating sinusoidal field diffuses partially into the ferromagnetic material leading to a predictably sub-optimal field enhancement. To model these physics, finite element techniques employ nonlinear iterative solvers which are time consuming. A novel method is developed …

Virtual Structures Based Autonomous Formation Flying Control For Small Satellites, Tyson K. Smith

All Graduate Theses and Dissertations, Fall 2023 to Present

Many space organizations have a growing need to fly several small satellites close together in order to collect and correlate data from different satellite sensors. To do this requires teams of engineers monitoring the satellites orbits and planning maneuvers for the satellites every time the satellite leaves its desired trajectory or formation. This task of maintaining the satellites orbits quickly becomes an arduous and expensive feat for satellite operations centers. This research develops and analyzes algorithms that allow satellites to autonomously control their orbit and formation without human intervention. This goal is accomplished by developing and evaluating a decentralized, optimization-based …

Gps-Denied Navigation Using Synthetic Aperture Radar, Tucker Hathaway

All Graduate Theses and Dissertations, Fall 2023 to Present

In most modern navigation systems, GPS is used to determine the precise location of the vehicle; however, GPS signals can easily be blocked, jammed, or spoofed. These signals can be blocked by canyons or tall buildings. Additionally, adversaries can transmit signals that either make GPS signals difficult to interpret or that imitate real GPS signals and cause a navigation system to think it is somewhere other than its true location. GPS-denied (GPS-D) navigation is the process of navigating in the absence of GPS.

Many methods of performing GPS-D navigation have been proposed and explored. One such method is to use …

Melanoma Detection Based On Deep Learning Networks, Sanjay Devaraneni

Electronic Theses, Projects, and Dissertations

Our main objective is to develop a method for identifying melanoma enabling accurate assessments of patient’s health. Skin cancer, such as melanoma can be extremely dangerous if not detected and treated early. Detecting skin cancer accurately and promptly can greatly increase the chances of survival. To achieve this, it is important to develop a computer-aided diagnostic support system. In this study a research team introduces a sophisticated transfer learning model that utilizes Resnet50 to classify melanoma. Transfer learning is a machine learning technique that takes advantage of trained models, for similar tasks resulting in time saving and enhanced accuracy by …

Cyber-Threat Detection Strategies Governed By An Observer And A Neural-Network For An Autonomous Electric Vehicle, Douglas Scruggs

All Theses

A pathway to prevalence for autonomous electrified transportation is reliant upon accurate and reliable information in the vehicle’s sensor data. This thesis provides insight as to the effective cyber-attack placements on an autonomous electric vehicle’s lateral stability control system (LSCS). Here, Data Integrity Attacks, Replay Attacks, and Denial-of-Service attacks are placed on the sensor data describing the vehicle’s actual yaw-rate and sideslip angle. In this study, there are three different forms of detection methods. These detection methods utilize a residual metric that incorporate sensor data, a state-space observer, and a Neural-Network. The vehicle at hand is a four-motor drive autonomous …

Custom-Designed And Collaborative Unmanned Systems With Learning-Based Applications, Robert Zanone

All Theses

This paper presents a culmination of work utilizing custom-designed autonomous vehicles and learning based simulations applied to real world applications across three distinct research domains. The first focuses on deploying autonomous drones in an agricultural setting for plant phenotyping. A telescoping arm is used to deploy a camera into the plant foilage for under-the-canopy imaging. The system utilizes on-board image processing to identify early-stage issues such as diseases, bacteria, and pests in crop plants to provide data for crop loss mitigation. The system takes advantage of the maneuverability of drones allowing for quick random sampling when traversing large areas.

In …

Safe Navigation Of Quadruped Robots Using Density Functions, Andrew Zheng

All Theses

Safe navigation of mission-critical systems is of utmost importance in many modern autonomous applications. Over the past decades, the approach to the problem has consisted of using probabilistic methods, such as sample-based planners, to generate feasible, safe solutions to the navigation problem. However, these methods use iterative safety checks to guarantee the safety of the system, which can become quite complex. The navigation problem can also be solved in feedback form using potential field methods. Navigation function, a class of potential field methods, is an analytical control design to give almost everywhere convergence properties, but under certain topological constraints and …

Investigating Mems Devices In Flow Conditions Relevant To Flow-Through Systems., Mohammad Shafquatul Islam

Electronic Theses and Dissertations

Advancements in microscale actuating technologies has substantially expanded the possibilities of interacting with the surrounding environment. Microstructures that deflect in response to mechanical forces are one of the largest application areas of microelectromechanical systems (MEMS). MEMS devices, functioning as sensors, actuators, and support structures, find applications in inertial sensors, pressure sensors, chemical sensors, and robotics, among others. Driven by the critical role of catalytic membrane reactors, this dissertation aims to evaluate enzyme activity on polymeric membranes and explore how fabrication methods from the field of Electrical and Computer Engineering (ECE) can incorporate sensing and actuation into these porous surfaces. Toward …

Adaptive Personalized Drug Delivery Method For Warfarin And Anemia Management: Modeling And Control., Affan Affan

Electronic Theses and Dissertations

Personalized precision medicine aims to develop the appropriate treatments for suitable patients at the right time to obtain optimal results. Personalized medicine is challenging due to inter- and intra-patient variability, narrow therapeutic window, the effect of other medications, comorbidity (more than one disease at a time), nonlinear patient dynamics, and time-varying patient dose response characteristics which include bleeding (internal and external). This research aims to develop a framework for an adaptive personalized modeling and control method with minimum clinical patient specific dose response data for optimal drug dosing. The proposed methodology is applied to anemia and warfarin management. It is …

Design, Fabrication, And Integration Of Robotic Skin Sensors For Human Robot Interaction., Olalekan Olakitan Olowo

Electronic Theses and Dissertations

Enhancing physical human-robot interaction in modern robotics relies on refining the tactile perception of robot skin sensors. This research focuses on crucial aspects of the development process, including fabrication techniques, miniaturization, and integration for a more efficient collaborative human-robot interface. The fabrication process of robot skin sensors, designed to mimic human skin, is explored both within and outside cleanroom environments. An enhanced technique is presented to increase fabrication yield and create more miniaturized sensor designs with feature sizes in the tens of microns. These sensors function as piezoresistive arrays using organic polymers like PEDOT: PSS as the pressure-sensing medium. Various …

Optical And Electrical Interfaces For Biological Structures, Mehdi Bandali

Boise State University Theses and Dissertations

This dissertation presents novel solutions for recording optical and electrical data from biological structures. CHAPTER ONE discusses the 16×16 Time correlated SPAD image array I developed in a 180 nm HV CMOS process for single-molecule localization super-resolution microscopy (SRM). This image array has a maximum frame rate of 80 MHz and a fill factor of 17.4 %. To demonstrate SRM with this imaging array, we localized gold nanoparticle displacement at 40 nm. CHAPTER TWO discusses stimulation artifacts' time and frequency domain characteristics and potential strategies for canceling this interference on neural recording. CHAPTER THREE discusses an artifact-resilient neural recording front-end …

Hybrid Wall Outlet For Ac Or Dc Power Delivery, Garrett Knoller, Kerr Allan, Greg Perini

Electrical Engineering

The goal of this project is to develop hybrid DC and AC wall outlets for an efficient, flexible power interface. A DC plug standard is also proposed to allow DC devices to be safely powered by the outlet with the correct DC voltage for each device. The primary objective is to create a power outlet compatible with the proposed DC plug as well as NEMA 5-15 AC plugs, enabling the same outlet to power both types of load as needed. The outlet is intended for buildings and systems transitioning to an isolated DC grid to encourage DC development and adoption. …

Dc To Ac Inverter For A Microgrid-Inspired Power Distribution Architecture For Electric Vehicles, Bryan A. Carrillo Martinez, Eli Blacklock, Paul A. Samson, William S. Holt-Hillis

Electrical Engineering

This project builds upon the prototyping of a microgrid-inspired power distribution architecture for electric vehicles (EVs). The efficacy of this prototype aims to inform a full-scale power distribution system that charges an EV battery, supports the electric grid with important ancillary services, performs peer-to-peer EV charging, and works in conjunction with other AC and DC sources and loads. The scope of this report focuses specifically on the design, construction, and testing of the DC/AC inverter. Future development of this distribution architecture will incorporate synchronous generators, a battery management system, and an Arduino/Raspberry Pi-based communication system to fully simulate an electric …

Digital Filter Implementation On A Dsp Development Board, Tien Le, Helen Zhang

Electrical Engineering

This project to implement digital filters on a Digital Signal Processor (DSP) development board intends to demonstrate viability for future use in teaching digital signal processing lab courses. The digital filter types covered, including Finite Impulse Response (FIR) and Infinite Impulse Response (IIR) filters of various basic frequency responses, will mirror current DSP lab projects to fulfill course learning objectives for filter design and characterization. Design features will include speed optimization to enable real-time digital signal processing. This project will investigate the use of Code Composer Studio to compile C and assembly code to the DSP. Alternatives for currently available …