Computer Engineering Commons^™

A New Approach: Ordinal Predictive Maintenance With Ensemble Binary Decomposition (Opmeb), Ozlem Ece Yurek, Derya Birant

Turkish Journal of Electrical Engineering and Computer Sciences

Predictive maintenance (PdM), a fundamental element of modern industrial systems, employs machine learning to monitor equipment conditions, estimate failure probabilities, and optimize maintenance schedules. Its core objective is to enhance equipment reliability, extend lifespan, and minimize costs through data-driven insights by enabling efficient maintenance scheduling, reducing downtime, and optimizing resource allocation. In this paper, we propose a novel ordinal predictive maintenance with ensemble binary decomposition (OPMEB) method for the PdM domain, considering the hierarchical nature of class labels reflecting the machine's health status, including categories like healthy, low risk, moderate risk, and high risk. The proposed OPMEB method was validated …

A Real-Time Embedded System Designed For Nilm Studies With A Novel Competitive Decision Process Algorithm, Sai̇d Mahmut Çinar, Rasi̇m Doğan, Emre Akarslan

Turkish Journal of Electrical Engineering and Computer Sciences

This paper explores the determination of any load or load combination in a power system at any moment. This process requires measurements at the main electric utility service entry of a house, known as nonintrusive measurement. To accurately identify loads, total harmonic distortion, RMS, third harmonic currents, and power consumption are considered their fingerprints. Based on these fingerprints, an algorithm called the competitive decision process is developed and integrated into an embedded system. This algorithm has a two-level decision mechanism. In the first stage, the winner loads with the highest similarity scores from each feature are determined, and the loads …

Multi-Label Voice Disorder Classification Using Raw Waveforms, Gökay Di̇şken

Turkish Journal of Electrical Engineering and Computer Sciences

Automated voice disorder systems that distinguish pathological voices from healthy ones have been developed with the aid of machine learning methods. Both clinicians and patients can benefit from these systems as they provide many advantages, compared to the invasive techniques. These systems can produce binary (healthy/pathological) or multi-class (healthy/selected pathologies) decisions. However, multiple disorders might exist in an individual’s voice. Multi-label classification should be considered in such cases. By this time, only a single report is available on this topic, where hand-crafted features were used, and a data augmentation technique was utilized to overcome class imbalances. In this study, a …

Ensemble Learning For Accurate Prediction Of Heart Sounds Using Gammatonegram Images, Sinam Ashinikumar Singh, Sinam Ajitkumar Singh, Aheibam Dinamani Singh

Turkish Journal of Electrical Engineering and Computer Sciences

The analysis of heart sound signals constitutes a pivotal domain in healthcare, with the prediction of imbalanced heart sounds offering critical diagnostic insights. However, the inherent diversity in cardiac sound patterns presents a substantial challenge in predicting imbalanced signals. Many scientific disciplines have focused a great deal of emphasis on the problem of class inequality. We introduce an ensemble learning approach employing a convolutional neural network model-based deep learning algorithm to effectively tackle the challenges associated with predicting imbalanced heart sound signals. We use a Gammatone filter bank to extract relevant features from the heard sound signal. Our approach leverages …

Detection And Classification Of Unauthorized Use Of Irrigation Motors In Agricultural Irrigation, Önder Ci̇velek, Sedat Görmüş, Hali̇l İbrahi̇m Okumuş, Orhan Gazi̇ Kederoglu

Turkish Journal of Electrical Engineering and Computer Sciences

The decarbonisation of electricity generation requires the real-time monitoring and control of grid components in order to efficiently and timely dispatch demand. This highly automated system, known as the Smart Grid, relies on smart or sensor-equipped distribution network components to optimise energy flow and minimise losses. However, energy theft, a major obstacle to efficient resource utilisation, poses a significant challenge to achieving this goal. This study proposes and evaluates a real-time telemetry and control system designed to mitigate energy theft in agricultural irrigation applications. The system increases energy efficiency by tracking the energy use in agricultural irrigation. The key challenge …

Data Lakes: A Survey Of Concepts And Architectures, Sarah Azzabi, Zakiya Alfughi, Abdelkader Ouda

Electrical and Computer Engineering Publications

This paper presents a comprehensive literature review on the evolution of data-lake technology, with a particular focus on data-lake architectures. By systematically examining the existing body of research, we identify and classify the major types of data-lake architectures that have been proposed and implemented over time. The review highlights key trends in the development of data-lake architectures, identifies the primary challenges faced in their implementation, and discusses future directions for research and practice in this rapidly evolving field. We have developed diagrammatic representations to highlight the evolution of various architectures. These diagrams use consistent notations across all architectures to further …

Reality Capture Technologies For Continuous Inline Quality Monitoring In Construction 3d Printing, Michael J. Martin Ii

LSU Master's Theses

Extrusion-based construction 3D printing (C3DP) is an innovative and emerging technology aiming at the modernization of the construction industry. It uses robots and computer control to reduce the need for human labor and to decrease construction time and cost. C3DP creates elements layer by layer without using formworks, and it is critical to detect layer defects and deformations to ensure that each layer is printed with the desired dimensions. These defects can lead to a variety of issues during or after the construction process, including the collapse of freshly printed elements. In order to detect such deformations and to enable …

Enterprise Systems: Installing And Configuring Erpnext On Macos, Yazan Abbasi

Senior Honors Theses

Enterprise Resource Planning (ERP) systems integrate business processes across organizations onto unified digital platforms through data and workflow consolidation. However, high licensing costs of proprietary ERP solutions like SAP and Oracle limit adoption for small and medium enterprises. This led to the emergence of open-source ERP alternatives like ERPNext which provide sophisticated capabilities at much lower total cost of ownership. However, ERPNext faces documentation gaps that hamper onboarding, customization, and widespread adoption. Accelerating ERPNext implementation by developing a comprehensive installation and configuration guide tailored for developers using Mac environments will be examined furthermore.

The background on ERP systems explores critical …

Development And Evaluation Of An Expedited System For Creation Of Single Walled Carbon Nanotube Platforms, Ivon Acosta Ramirez, Omer Sadak, Wali Sohail, Xi Huang, Yongfeng Lu, Nicole M. Iverson

Department of Electrical and Computer Engineering: Faculty Publications

Single-walled carbon nanotubes (SWNT) have a strong and stable near-infrared (nIR) fluorescence that can be used to selectively detect target analytes, even at the single molecule level, through changes in either their fluorescence intensity or emission peak wavelength. SWNTs have been employed as NIR optical sensors for detecting a variety of analytes. However, high costs, long fabrication times, and poor distributions limit the current methods for immobilizing SWNT sensors on solid substrates. Recently, our group reported a protocol for SWNT immobilization with high fluorescence yield, longevity, fluorescence distribution, and sensor response, unfortunately this process takes 5 days to complete. Herein …

Introduction To Computer Technology: Build Your Own Computer, Michael Deredita, Orit D. Gruber

Open Educational Resources

The students will work on a project to specify, shop, and build a desktop computer (using a budget ~ $1,750), according to their needs and applications. Students will use Newegg (https://www.newegg.com) and/or Microcenter (https://www.microcenter.com/) to browse and select (parts), and will record the specifications of the selected components; including the make/model/item number of each part.

Effective Position Intelligent Decision Method Based On Model Fusion And Generative Network, Liqiang Guo, Liang Ma, Hui Zhang, Jing Yang, Lianfeng Li, Yaqi Zhai

Journal of System Simulation

Abstract: Military intelligence technology is currently the most dynamic frontier and the inevitable trend for the development of unmanned equipment in the future. Aiming at the dual requirements of reliability and real-time performance of unmanned platform autonomous decision-making in complex environments and the shortcomings of existing combat simulation technology based on rule reasoning in terms of dynamics and flexibility, a research method of principle analysis and experimental verification is adopted. Based on the shooting experiment dataset of an unmanned platform, the effective position recognition link of attack decision-making is transformed into a binary classification problem with imbalanced categories in the …

Digital Twin Modeling And Control Of Robots For Intelligent Manufacturing Scenarios, Ying Li, Lan Gao, Zhisong Zhu

Journal of System Simulation

Abstract: The introduction of Industry 4.0 and the Made in China 2025 development policy has accelerated the transformation of the manufacturing industry from automation to intelligence. Industrial robots, as the representative equipment of intelligent manufacturing, will also become more intelligent. Based on digital twin technology, digital modeling, and simulation debugging are conducted for such problems as interference and collision, tedious operation, and low efficiency of industrial robot spot welding debugging in production. Process Simulate from TECNOMATIX software is utilized to digitally model the robot spot welding station and define its motion, and TIA Portal and S7-PLCSIM Advanced are applied to …

Research On Learnable Wargame Agent Driven By Battle Scheme, Yifeng Sun, Zhi Li, Jiang Wu, Yubin Wang

Journal of System Simulation

Abstract: To enable the agent to cope with complex battle scenarios and objectives in wargame, a learnable wargame agent architecture driven by a battle scheme is proposed. By analyzing the "attachment characteristics" and "loose coupling characteristics" of the agent to wargame system, the learnable requirements of the agent are obtained. In the design of the agent framework, battle schemes are used to reduce the learning range of the agent. The finite state machine corresponds to the knowledge of the operational phase in the battle scheme, and the decision-making space of the agent is determined according to the framework of the …

A Deep Fuzzy Classifier Based On Feature Transform And Reconstruction, Rui Yin, Wei Lu, Jianhua Yang

Journal of System Simulation

Abstract: To obtain a classifier with good classification accuracy and interpretability, a deep fuzzy classifier based on feature transform and reconstruction (FR-DFC) is proposed. In FR-DFC, several fuzzy systems (FT_FS) for feature transform and a multi-prototype fuzzy classification system (MPRFD_FS) are stacked together to realize the classification process of the model, based on the hierarchically stacked thought originated from deep learning. Specifically, the stacked FT_FSs explore the hidden features in the data by transferring data from the original data space to the high-level feature space. MPRFD_FS, on the other hand, implements classification based on multiple prototypes that characterize the distribution …

Adaptive Particle Swarm Optimization Algorithm Based On Trap Label And Lazy Ant, Wei Zhang, Yuefeng Jiang

Journal of System Simulation

Abstract: Many existing strategies for improving particle swarm optimization (PSO) fall short in assisting particles trapped in local optima and experiencing premature convergence to recover optimization performance. In response, an adaptive particle swarm optimization algorithm based on trap label and lazy ant (TLLA-APSO) is proposed. Firstly, the trap label strategy dynamically adjusts particle velocities, enabling the particle swarm to escape from local optima. Secondly, the lazy ant optimization strategy is employed to diversify particle velocity and enhance population diversity. Finally, the inertia cognition strategy introduces historical position into velocity updates, promoting path diversity and particle exploration while effectively mitigating the …

Simulation Optimization Of Airport Baggage Import System Based On Multi-Objective Wolf Pack Algorithm, Yifei Tao, Xiaopeng Ding, Junbin Luo, Xiao Fu, Jiaxing Wu, Yirong Li

Journal of System Simulation

Abstract: Aiming at the problems of long waiting time for passenger baggage import and high system energy consumption during the operation of the baggage import system in civil aviation airports, a simulation optimization framework for solving this problem is proposed by comprehensively considering the influence of key control parameters on the operation efficiency of the baggage import system in airports, including the virtual window control mode, the operation speed of the collection belt conveyor, the length of the virtual window and the number of check-in counters opened at the same time. By analyzing the actual operating conditions of the airport …

Task Analysis Methods Based On Deep Reinforcement Learning, Xue Gong, Pengfei Peng, Li Rong, Yalian Zheng, Jun Jiang

Journal of System Simulation

Abstract: In response to the high coupling of task interaction and many influencing factors in task analysis, a task analysis method based on sequence decoupling and deep reinforcement learning (DRL) is proposed, which can achieve task decomposition and task sequence reconstruction under complex constraints. The method designs an environment for deep reinforcement learning based on task information interaction, while improving the SumTree algorithm based on the difference between the loss functions of the target network and the evaluation network, achieving the priority evaluation among tasks. The activation function operation mechanism is introduced into the deep reinforcement learning network, followed by …

Modeling And Verification Of Cooperative Vehicle Infrastructure System At Unsignalized Intersection Based On Time Automata, Wei Liu, Qirui Xiao, Xinhai Chen, Chang Rao, Yu Zhang, Bosi Wang

Journal of System Simulation

Abstract: Cooperative vehicle infrastructure system (CVIS) is one of the advanced solutions to enhance intersection vehicle passage safety. Due to the lack of clear specifications and standards regarding the dynamic timing and transition processes of system object state interaction in existing CVIS technologies, ensuring the safety of passage control logic is challenging. This study utilizes formal language to describe the functional logic of CVIS in unsignalized intersections, verifying the safety of system object state interaction and control logic to improve vehicle passage safety at unsignalized intersections. Simulations are conducted for scenarios including single-vehicle non-conflict, dual-vehicle conflict, and multi-vehicle conflict to …

Real-Time Non-Photorealistic Rendering Method For Black And White Comic Style In Games And Animation, Yan Hu, Lizhe Chen, Hanna Xie, Yuyao Ge, Shun Zhou, Xingquan Cai

Journal of System Simulation

Abstract: To address the issues of high resource consumption and lengthy workflow in general nonphotorealistic, this paper proposes a real-time non-photorealistic rendering method for black and white comic style in games and animation. A specialized lighting model is designed to highlight the main environmental light and the grayscale grading of diffuse reflection based on the analysis of the lighting model effect. The pre-processing of the scene is achieved by merging the various components of the lighting model. A screen space three-phase edge detection method is proposed to sequentially perform depth edge detection, normal edge detection, and color edge detection on …

Simulation System For Carrier-Based Aircraft Ammunition Support Scheduling, Zhe Liu, Jiafeng Chen, Junfei Ma, Songhua Ma

Journal of System Simulation

Abstract: For inefficient scheduling of carrier-based aircraft ammunition support on the flight deck of aircraft carriers, a Unity3D-based 3D virtual demonstration method for carrier-based aircraft ammunition scheduling is proposed, and a 3D virtual simulation system for carrier-based aircraft ammunition scheduling on the flight deck of aircraft carriers is constructed. A problem model targeted at carrierbased aircraft ammunition transportation and loading scheduling process as well as processing rules for path determination, sequence constraint, and loading position compensation are established based on the defining system. An optimal solution for the scheduling process is realized by using the improved discrete grey wolf optimizer …

Uav Path Planning Based On Improved Harris Hawk Algorithm And B-Spline Curve, Zhifeng Huang, Yuanhua Liu

Journal of System Simulation

Abstract: Aiming at the global path planning problem of unmanned aerial vehicles (UAVs) in dynamic environments, this paper proposes an improved Harris Hawk optimization algorithm. To address the problem of insufficient search performance in the later stage of the algorithm, an adaptive chaos and core population dynamic partitioning strategy is proposed to improve the searchability of the algorithm in the later stage. The Harris Hawk update formula is modified, and the golden sine strategy is introduced to improve the search efficiency of the algorithm. Then, an adaptive dynamic cloud optimal solution perturbation strategy is integrated to improve the ability of …

Optimal Scheduling Of Vehicle-Network Interaction Based On Interval Stackelberg Game Of Virtual Power Plant, Weiliang Liu, Qianwen Yan, Qiliang Zhang, Shuai Liu, Changliang Liu, Jiayao Kang, Xin Wang

Journal of System Simulation

Abstract: To better exploit the regulation potential of electric vehicles (EVs), resolve the conflicts of interest among the stakeholders in vehicle-to-grid (V2G) interactions, and overcome the uncertainty of distributed energy sources and load, this paper proposes a two-level optimization scheduling model for V2G interactions based on the interval Stackelberg game of a virtual power plant (VPP). The VPP aggregator is considered as the upper level, and the EV users as the lower level. The upper level model uses interval numbers to describe the uncertainty of sources and loads, with the aim of minimizing the operating cost of the VPP aggregator, …

Maglev Ball Control Algorithm Based On Levant Differentiator, Zhenli Zhang, Yongzhuan Wang, Yao Qin, Jie Yang

Journal of System Simulation

Abstract: To solve the problem of unsatisfactory control effect of permanent magnet electromagnetic hybrid suspension system caused by signal mutation and noise interference, the control method ILevant- PID, the combination of an improved Levant differentiator and PID, is proposed. The proposed method combines the strong adaptability of PID control and the robust characteristic of Levant differentiator on input noise to solve the chattering problem of the system output. The simulated anneal-particle swarm optimization is utilized to solve the constraints of the ILevant-PID controller, such as multiple parameters and strong correlation. The simulation results show that compared with the traditional PID …

Real-Time Scheduling Method For Dynamic Flexible Job Shop Scheduling, Quan Jiang, Jingxuan Wei

Journal of System Simulation

Abstract: A multi-objective dynamic flexible job shop scheduling problem model with machine breakdown and random jobs arrival is constructed to address the interference of dynamic events in manufacturing processing on the scheduling scheme, and a real-time scheduling method with multiobjective proximal policy optimization (MPPO) algorithm is proposed. The MPPO algorithm trains two agents, routing agent (RA) and sequencing agent (SA), for real-time scheduling and real-time processing of dynamic events. It employs a linear combination of weight vectors and reward vectors as reward signals and stores the agents' parameters for each weight vector to optimize multiple objectives. The required state information, …

Path Planning For Mobile Robot Based On Angle Search, Yaru Wang, Dexin Yao, Zengli Liu, Yi Peng

Journal of System Simulation

Abstract: The angle search algorithm for angle-controlled robots is proposed to increase the path search speed and optimize the path length. The algorithm effectively finds a path in static surroundings by performing an efficient search in a specific dimensional range based on the position of the robot and the target point. Firstly, search angles are predetermined according to the characteristics of the environment in the grid map. Then, the estimated angle of the robot's surrounding grid is computed. Finally, a new extension point is chosen by comparing the estimated angle to the search angle, demonstrating the usefulness and viability of …

Digital Application Of Equipment System Test And Evaluation Based On Digital Twin And Parallel Experiment Theory, Hongjie Dang, Wenguang Yu, Huahui Yang

Journal of System Simulation

Abstract: With the development of equipment systematization, traditional test with real equipment can not meet the requirements of Test and Evaluation(T&E), especially for complex equipment. As the main digital methods in current, digital twins and parallel experiments can support the digital application in the field of equipment Test and Evaluation. This paper makes a comparative analysis of the two digital technology means, extracts their technical connotation and characteristics, and then integrates them to explore the application mode, application time and application occasions in the field of equipment T&E. Taking the satellite for example, by constructing the digital architecture of equipment …

Interaction Between Virus Transmission Variation And Population Crossover Activity And Diffusion Model, Lei Yu, Xichou Zhu, Huaming Liao, Jiafeng Guo, Xueqi Cheng

Journal of System Simulation

Abstract: In view of the current high incidence of human-to-human infectious viruses, a multi-agent simulation and deduction model was proposed and designed based on the random characteristics of virus transmission variation and the influence of population crossover activity. The external pathogenicity and infectious characteristics of the virus and the external activities and immune characteristics of the human were quantified, and the interdependence and confrontation process between the virus and the human were modeled. The development trends and statistical characteristics of a large number of viruses and humans were deduced through the model. The experimental analysis reveals that the randomness of …

Insight Into Complexity: Novel Information Theoretic Analysis Of Spatiotemporal Interactions, Humayra Tasnim

Computer Science ETDs

Complex systems are comprised of different components. Interactions and associations among these components define the functionality of the system. For example, T cells must directly interact with virally infected cells to kill them. This research characterizes the most relevant components of complex systems by analyzing interacting relationships using information theoretic measures. It emphasizes the importance of spatial and temporal dynamics, which occur when components share spatial proximities or temporal sequences. Novel information theoretic analyses are proposed for quantifying the degree of association among system components, which is key to defining the spatiotemporal dynamics. One focus of this work is the …

Decision-Making Considering Power Consumption And Preference For New Energy Under Dual-Credit Policy, Fang Li, Tianhao Dong

Journal of System Simulation

Abstract: To explore the production decision-making problem of the electrification transformation in the domestic automobile industry faced by automobile manufacturers, different decision-making models under two production scenarios are constructed for the secondary supply chain composed of manufacturers and retailers under the background of a dual-credit policy. The electric energy consumption of new energy vehicles and consumers' preference for new energy are introduced. The Stackelberg game is applied to obtain the optimal production decision and income analysis of each member in the supply chain under different decision modes in different production scenarios. The results show that the in-depth implementation of the …

Vysion Software, Isaias Hernandez-Dominguez Jr, Chander Luderman Miller

2024 Symposium

Vision loss presents significant challenges in daily life. Existing solutions for blind and visually impaired individuals are often limited in functionality, expensive, or complex to use. Vysion Software addresses this gap by developing a user-friendly, all-in-one AI companion app that provides features including text summarization, real-time audio descriptions, and AI-enhanced navigation. This project details the development plan, initial functionalities, and future vision for Vysion Software.