Computer Engineering Commons^™

Endoscopic Application Of A Compact Compound-Eye Camera, Keiichiro Kagawa, Shoji Kawahito

Makara Journal of Technology

A multi-functional compound-eye endoscope enabling multi-spectral imaging and variable field-of-view is presented, which is based on a compact compound-eye camera called TOMBO (thin observation module by bound optics). Narrow-band filters attached to some lenses provide snap-shot multi-band images. Fixed and movable mirrors are introduced to control the field of view, which realizes several observation modes such as three-dimensional shape measurement, wide field-of-view, and close-up observation.

Development Of The Soekarno–Hatta International Airport Rail Link Project Using The Value Engineering Method: Creating Value For Money, Mohammed Ali Berawi, Bambang Susantono, Suyono Dikun, Tommy Ilyas, Herawati Zetha Rahman, Abdur Rohim Boy Berawi, Teuku Yuri Zagloel, Perdana Miraj, Jade Sjafrecia Petroceany

Makara Journal of Technology

Soekarno–Hatta Airport is the main gateway for international flights to Greater Jakarta. Its accessibility depends on the inter-city and Sedyatmo toll roads, which causes congestion in peak hours, leading to uncertainty about travel times. The Soekarno–Hatta International Airport Rail Link (SHIARL) is proposed as an alternative mass transportation project, which is expected to provide accessibility and mobility for people and goods to and from the airport. Previously, the project was unattractive to private investors as it was technically and financially unfeasible. Therefore, this research aims to improve the feasibility of the Soekarno-Hatta International Airport Rail Link (SHIARL) by using a …

The Mechanical And Tribology Properties Of Sputtered Titanium Aluminum Nitride Coating On The Tungsten Carbide Insert Tool In The Dry Turning Of Tool Steel, Esmar Budi, Mohd. Razali Bin Muhamad, Md. Nizam Bin Abdul Rahman

Makara Journal of Technology

The effect of the sputtering parameters on the mechanical tribology properties of Titanium Aluminum Nitride coating on the tungsten cabide insert tool in the dry turning of tool steel has been investigated. The coating was deposited using a Direct Current magnetron sputtering system with various substrate biases (-79 to -221 V) and nitrogen flow rates (30 to 72 sccm). The dry turning test was carried out on a Computer Numeric Code machine using an optimum cutting parameter setting. The results show that the lowest flank wear (~0.4 mm) was achieved using a Titanium Aluminum Nitride-coated tool that was deposited at …

Modified Design Of Pin-On-Ring Tribometer For Hip Joint Prostheses Measurement; Case Study On Salat Activity, Muhammad Khafidh, Jamari Jamari, Sulardjaka Sulardjaka, Mohamad Tauviqirrahman, Emile Van Der Heide

Makara Journal of Technology

Total hip replacement (THR) is one of the most successful orthopedic surgical procedures for replacing a broken hip joint. In THR, wear may occur at the articulating surface of the acetabular cup and the femoral head. In Indonesia, the country with the largest Muslim population in the world, most of the inhabitants do salat (praying) every day. THR users are banned from doing salat for fear it will damage the hip joint prostheses. The previous wear calculation methods on the hip joint prostheses use the gravimetric, coordinate measuring machine (CMM), profiler, and geometric method. The disadvantages of the previous methods …

Continuous Production Of Nanotubes And Carbon Clusters By Use Of The Revolver-Injection-Type Arc Jet Producer, Tetsu Mieno, Naoki Matsumoto, Takahashi Tomie, H. Inoue

Makara Journal of Technology

Efficient and continuous production of fullerenes, single-walled carbon nanotubes (SWNTs), and carbon nano-particles has been developed by the JxB arc jet method, where the Lorentz force of magnetic field jets out gaseous carbon particles to the JxB direction. In order to realize continuous mass production of these carbon clusters, the revolverinjection- type arc jet producer (RIT-AJP) has been developed. Production of fullerenes, endohedral metallo-fullerenes, SWNTs, metal-encapsulated carbon nano particles has been examined.

Lateral Load Resistance Of Laminated Veneer Lumber Sengonwooden Joints With Wooden Dowels, Niken Palaeowati, Ali Awaludin, Suprapto Siswosukarto

Makara Journal of Technology

Analytical models for wooden-doweled joints need to be developed. The objective of this research is to determine whether the strength of wooden-doweled joints can be well predicted by equations developed for steel-doweled joints. In this experiment, various connection parameters, such as dowel diameter, species of the wooden dowel, and angle of joints, are studied. The joint specimens are loaded in a quasi-static state with four replications each. A5% offset diameter method is used to determine the lateral load resistance of the tested joints, while the predictions are evaluated by equations given in Indonesian National Standard (SNI) 7973-2013 and the European …

Media Usage In Post-Secondary Education And Implications For Teaching And Learning, Gerd Gidion, Luiz Fernando Capretz, Ken Mead Dr., Michael Grosch Dr.

Electrical and Computer Engineering Publications

The Web 2.0 has permeated academic life. The use of online information services in post-secondary education has led to dramatic changes in faculty teaching methods as well as in the learning and study behavior of students. At the same time, traditional information media, such as textbooks and printed handouts, still form the basic pillars of teaching and learning. This paper reports the results of a survey about media usage in teaching and learning conducted with Western University students and instructors, highlighting trends in the usage of new and traditional media in higher education by instructors and students. In addition, the …

Dynamically Reconfigurable Miniature Golf Course, James Lind

Honors Theses

The purpose of this report is to inform the reader of the Senior Design Project lead by 3 students in the Electrical and Computer Engineering department at Western Michigan University. The project is in needed for use within the ECE department as a tool for showcasing to prospective students the attributes of electrical and computer engineering.

At the heart of the project lies an Arduino microcontroller acting as the commanding brain of the system. Its task is to manipulate various types of obstacles throughout the playing field with a goal of delivering a dynamic experience to the player(s). Additionally, a …

Interval Computations And Interval-Related Statistical Techniques: Estimating Uncertainty Of The Results Of Data Processing And Indirect Measurements, Vladik Kreinovich

Departmental Technical Reports (CS)

In many practical situations, we only know the upper bound Δ on the measurement error: |Δx| ≤ Δ. In other words, we only know that the measurement error is located on the interval [−Δ, Δ]. The traditional approach is to assume that Δx is uniformly distributed on [−Δ, Δ]. In some situations, however, this approach underestimates the error of indirect measurements. It is therefore desirable to directly process this interval uncertainty. Such "interval computations" methods have been developed since the 1950s. In this paper, we provide a brief overview of related algorithms and results.

Development Of Workforce Skills: Student Perceptions Of Mentoring In First Robotics, Katie Joan Veal Wallace

Dissertations

In today’s global economy, new workforce competencies are needed for success at both individual and societal levels. The new workforce skills extend beyond basic reading, writing, and arithmetic to include higher order processes such as critical thinking and problem solving. Technical job opportunities have grown by approximately 17%, yet the United States continues to decline in science, technology, engineering and mathematics (STEM) disciplines. Further, U.S. students earn average or below average test scores when compared to other developed countries. Researchers cite the need to incorporate the learning of workplace skills into secondary education curriculum, and advocates call for new teaching …

Need For Data Processing Naturally Leads To Fuzzy Logic (And Neural Networks): Fuzzy Beyond Experts And Beyond Probabilities, Vladik Kreinovich, Hung T. Nguyen, Songsak Sriboonchitta

Departmental Technical Reports (CS)

Fuzzy techniques have been originally designed to describe imprecise ("fuzzy") expert knowledge. Somewhat surprisingly, fuzzy techniques have also been successfully used in situations without expert knowledge, when all we have is data. In this paper, we explain this surprising phenomenon by showing that the need for optimal processing of data (including crisp data) naturally leads to fuzzy and neural data processing techniques.

This result shows the potential of fuzzy data processing. To maximally utilize this potential, we need to provide an operational meaning of the corresponding fuzzy degrees. We show that such a meaning can be extracted from the above …

Every Sue Function Is A Ratio Of Two Multi-Linear Functions, Joe Lorkowski, Olga Kosheleva, Vladik Kreinovich

Departmental Technical Reports (CS)

We prove that the function computed by each single-use expression is a ratio of two multi-linear functions.

When Can We Reduce Multi-Variable Range Estimation Problem To Two Fewer-Variable Problems?, Joe Lorkowski, Olga Kosheleva, Luc Longpre, Vladik Kreinovich

Departmental Technical Reports (CS)

Sometimes, a function f of n variables can be represented as a composition of two functions of fewer variables. In this case, the problem of computing the range of f on given intervals can be reduced to two range-computation problems with fewer variables. In this paper, we describe a feasible algorithm that checks whether such a reduction is possible -- and, if it is possible, produces the desired reduction.

50 Years Of Fuzzy: From Discrete To Continuous To -- Where?, Vladik Kreinovich, Hung T. Nguyen, Olga Kosheleva, Rujira Ouncharoen

Departmental Technical Reports (CS)

While many objects and processes in the real world are discrete, from the computational viewpoint, discrete objects and processes are much more difficult to handle than continuous ones. As a result, a continuous approximation is often a useful way to describe discrete objects and processes. We show that the need for such an approximation explains many features of fuzzy techniques, and we speculate on to which promising future directions of fuzzy research this need can lead us.

Improved Performance Of Analog And Digital Acousto-Optic Modulation With Feedback Under Profiled Beam Propagation For Secure Communication Using Chaos, Fares S. Almehmadi, Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

Using intensity feedback, the closed-loop behavior of an acousto-optic hybrid device under profiled beam propagation has been recently shown to exhibit wider chaotic bands potentially leading to an increase in both the dynamic range and sensitivity to key parameters that characterize the encryption. In this work, a detailed examination is carried out vis-à-vis the robustness of the encryption/decryption process relative to parameter mismatch for both analog and pulse code modulation signals, and bit error rate (BER) curves are used to examine the impact of additive white noise.

The simulations with profiled input beams are shown to produce a stronger encryption …

Security Issues In Data Warehouse, Saiqa Aleem, Luiz Fernando Capretz, Faheem Ahmed Dr.

Electrical and Computer Engineering Publications

Data Warehouse (DWH) provides storage for huge amounts of historical data from heterogeneous operational sources in the form of multidimensional views, thus supplying sensitive and useful information which help decision-makers to improve the organization’s business processes. A data warehouse environment must ensure that data collected and stored in one big repository are not vulnerable. A review of security approaches specifically for data warehouse environment and issues concerning each type of security approach have been provided in this paper.

A Performance Study Of Genetic Algorithm-Assisted Beamforming In Distributed Cognitive Radio Networks, Andrew Minturn

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

Cognitive Radio (CR) is a technology that has gained much interest recently due to the increasing scarcity of the radio frequency spectrum. Large portions of the radio frequency spectrum are licensed to users who then have exclusive access to the bandwidth, and unlicensed bands can be a challenge to use due to interference from unlicensed users. Despite the seeming scarcity, tests of bands allocated by the Federal Communications Committee (FCC) to licensed and unlicensed user have shown that many are underutilized and often unoccupied by the user to whom they are licensed. CR aims to exploit this unused spectrum and …

How Much For An Interval? A Set? A Twin Set? A P-Box? A Kaucher Interval? Towards An Economics-Motivated Approach To Decision Making Under Uncertainty, Joe Lorkowski, Vladik Kreinovich

Departmental Technical Reports (CS)

A natural idea of decision making under uncertainty is to assign a fair price to different alternatives, and then to use these fair prices to select the best alternative. In this paper, we show how to assign a fair price under different types of uncertainty.

Granularity Helps Explain Seemingly Irrational Features Of Human Decision Making, Joe Lorkowski, Vladik Kreinovich

Departmental Technical Reports (CS)

Starting from well-known studies by Kahmenan and Tarsky, researchers have found many examples when our decision making -- and our decision making -- seem to be irrational. In this chapter, we show that this seemingly irrational decision making can be explained if we take into account that human abilities to process information are limited; as a result, instead of the exact values of different quantities, we operate with granules that contain these values. On several examples, we show that optimization under such granularity restriction indeed leads to observed human decision making. Thus, granularity helps explain seemingly irrational human decision making.

Scientific Application Acceleration Utilizing Heterogeneous Architectures, Edwin Weill

All Theses

Within the past decade, there have been substantial leaps in computer architectures to exploit the parallelism that is inherently present in many applications. The scientific community has benefited from the emergence of not only multi-core processors, but also other, less traditional architectures including general purpose graphical processing units (GPGPUs), field programmable gate arrays (FPGAs), and Intel's many integrated cores (MICs) architecture (i.e. Xeon Phi). The popularity of the GPGPU has increased rapidly because of their ability to perform massive amounts of parallel computation quickly and at low cost with an ease of programmability. Also, with the addition of high-level programming …

Rapdb: The Rapid Social Application Deployment Service, Lance Tyler, Matthew Morris

Computer Science and Software Engineering

No abstract provided.

Quickbooks Self-Employed Ios Application, Braden Young

Computer Science and Software Engineering

No abstract provided.

Badge Web Application, Ryan Green

Computer Engineering

This project includes the imagining, design, build, and test of a web application that creates and tracks a user’s progress on completing tasks that an administrator has created for the user. The goal of this project is to have a functioning webpage that is robust and scalable to support many users and many tasks. The application will be developed for use on all modern web browsers, and will have a persistent server to access from any platform. This project was designed to be an exercise in building a modern web application, and as such is written using many different languages, …

Examining Ambiguities In The Automatic Packet Reporting System, Kenneth W. Finnegan

Master's Theses

The Automatic Packet Reporting System (APRS) is an amateur radio packet network that has evolved over the last several decades in tandem with, and then arguably beyond, the lifetime of other VHF/UHF amateur packet networks, to the point where it is one of very few packet networks left on the amateur VHF/UHF bands. This is proving to be problematic due to the loss of institutional knowledge as older amateur radio operators who designed and built APRS and other AX.25-based packet networks abandon the hobby or pass away. The purpose of this document is to collect and curate a sufficient body …

Direct Torque Control Of An Lnduction Machine Using Multi-Layer Perceptron Network, Adithya Chandrashekharan

Masters Theses

In conventional direct torque control (DTC) scheme of induction motor (lM), Proportional Integral Controller (PI) is used as the speed controller. PI controller is more suitable in steady state condition and for linear system but both DTC and IM are mostly nonlinear. Multi-Layer perceptron neural network. (MLPNN) controller is more suitable and performs better than PI controller. The switching table of the conventional DTC is replaced by the MLPNN controller. The MLPNN inputs are, the magnitude of the stator flux, torque and the Voltage sectors. Levenberg-Marquardt back propagation technique has been used to train the MLPNN. The output of the …

A Comparative Study Of Generalized Arc-Consistency Algorithms, Olufikayo S. Adetunji

School of Computing: Dissertations, Theses, and Student Research

In this thesis, we study several algorithms for enforcing Generalized Arc­-Consistency (GAC), which is the most popular consistency property for solving Constraint Satisfaction Problems (CSPs) with backtrack search. The popularity of such algorithms stems from their relative low cost and effectiveness in improving the performance of search. Virtually all commercial and public- domain constraint solvers include some implementation of a generic GAC algorithm. In recent years, several algorithms for enforcing GAC have been proposed in the literature that relies on increasingly complex data structures and mechanisms to improve performance. In this thesis, we study, assess, and compare a basic algorithm …

Wingtip Dynamics Simulator, Eugene Fox, Nick Rodriguez, Steven Rieber

Mechanical Engineering

Raytheon is a defense contracting company with an electronic warfare division that is developing a radio frequency signal triangulation system. Part of the focus in improving this technology is the need for accurate and real time locational knowledge of the signal receivers, which are located at the tips of aircraft wings. Due to turbulence during flight, the fluttering motion of the wings alter the distance and angle relationships of the two receivers and add noise to the received signal data, which negatively affect the triangulation estimates. To mitigate this error caused by the wing flutter, Raytheon is developing a software …

Split-Step Approach To Electromagnetic Propagation Through Atmospheric Turbulence Using The Modified Von Karman Spectrum And Planar Apertures, Monish Ranjan Chatterjee, Fathi H.A. Mohamed

Electrical and Computer Engineering Faculty Publications

The impact of atmospheric phase turbulence on Gaussian beam propagation along propagation paths of varying lengths is examined using multiple random phase screens. The work is motivated by research involving generation and encryption of acousto-optic chaos, and the interest in examining propagation of such chaotic waves through atmospheric turbulence. A phase screen technique is used to simulate perturbations to the refractive index of the medium through the propagation path. A power spectral density based on the modified von Karman spectrum model for turbulence is used to describe the random phase behavior of the medium.

In recent work, results for the …

A Deep Search Architecture For Capturing Product Ontologies, Tejeshwar Sangameswaran

Graduate Theses and Dissertations

This thesis describes a method to populate very large product ontologies quickly. We discuss a deep search architecture to text-mine online e-commerce market places and build a taxonomy of products and their corresponding descriptions and parent categories. The goal is to automatically construct an open database of products, which are aggregated from different online retailers. The database contains extensive metadata on each object, which can be queried and analyzed. Such a public database currently does not exist; instead the information currently resides siloed within various organizations. In this thesis, we describe the tools, data structures and software architectures that allowed …

Optimizing Performance And Scalability On Hybrid Mpsocs, Hongyuan Ding

Graduate Theses and Dissertations

Hardware accelerators are capable of achieving significant performance improvement. But design- ing hardware accelerators lacks the flexibility and the productivity. Combining hardware accelerators with multiprocessor system-on-chip (MPSoC) is an alternative way to balance the flexibility, the productivity, and the performance. However, without appropriate programming model it is still a challenge to achieve parallelism on a hybrid (MPSoC) with with both general-purpose processors and dedicated accelerators. Besides, increasing computation demands with limited power budget require more energy-efficient design without performance degradation in embedded systems and mobile computing platforms. Reconfigurable computing with emerging storage technologies is an alternative to enable the optimization …