Civil and Environmental Engineering Commons^™

The Adaptative Construction Industry, Rhett Cox

The Professional Constructor

The construction industry is an industry that always unites to find ways to solve problems. It is very complex and requires considerable organization, hard work, specific skills, and a whole lot of determination. In this paper, I will discuss three ways that the industry is making strides to make construction better and more efficient: (a) increased use of modular construction and prefabrication, (b) use of drones, and (c) Building Information Modeling (BIM) use. With the construction process becoming more and more complex, improving efficiency and safety has gained more attraction, especially when coping with fundamental issues such as labor shortage, …

How New, Innovative Technology And Project Execution Tools And Techniques Can Be Used To Improve The Construction Process (Including Safety And Efficiency), James L. Craig

The Professional Constructor

Humanity has often sought to utilize tools and technology to make working faster, more efficient, more comfortable, and more accurate. While humans may have started with stone tools, we have since developed complex and sophisticated mechanical and digital technologies. The construction industry has been utilizing construction technology and equipment for these same reasons for generations. While other industries have embraced the use of smart, autonomous technology and robotics, the construction industry has steadily fallen behind in this effort. In this paper, I will discuss current work using these tools and possible applications for future development.

The Impact Of Climate Change On Building Energy Demands And Mitigation Measures In Florida, Aiyin (Erin) Jiang

The Professional Constructor

Tropical and subtropical parts of the world are projected to be the most vulnerable to the impact of climate change on building energy consumption demand. Few studies, however, focus on all four greenhouse emission scenarios defined by International Panel of Climate Change, which would be useful in assessing the energy demand challenges areas such as Florida. This study applies the most recognized climate change model downscaling approach, the morphing method, to investigate the impact of climate change on the commonly used commercial buildings in Florida’s climate zones under all four emission scenarios. It also analyzes the efficacy of various mitigation …

Frequency And Magnitude Of Cost Growth In Public Works Contracts, George Fulton, Panagiotis Mitropoulos

The Professional Constructor

Cost overruns are a persistent issue in the construction industry. This paper investigates factors that may drive cost growth on public works contracts. The study collected data on 1,043 public works projects completed over a three year period. The analysis examined the impact of four factors on cost overruns: (1) Project type, (2) Contract size, (3) Contract duration, and (4) Construction placement (value per day). The data were analyzed using a combination of basic descriptive statistics along with statistical hypothesis testing of means for various factors affecting cost growth. Cost growth was found to vary significantly by project type, contract …

Case Study Of Real-World Emissions Rates Verus Epaemission Standards For Motor Graders, Boshra Karimi, Phil Lewis

The Professional Constructor

Using the Volkswagen emissions scandal as motivation, the purpose of this case study was to investigate whether or not heavy-duty diesel construction equipment exceeds EPA emissions standards for nonroad diesel engines. The equipment analyzed included four separate motor graders with EPA emissions standards Tier 0, Tier 1, Tier 2, and Tier 3 engines. The analysis was based on a dataset of real-world emissions rates collected from in-use equipment on actual jobsites. The results showed that mass per time emissions rates for hydrocarbons, carbon monoxide, nitrogen oxides, and particulate matter decreased as the EPA emissions standards became more stringent. Furthermore, there …

Understanding Sub-Contractor Selection Factors In Thebuilding Construction Industry For The Southeastern United States, Dhaval Gajjar, Cayla Anderson

The Professional Constructor

The primary entities within building construction industry consists of the owner, the architect / engineer, and the general contractor, that ensure the success of any construction project. On a traditional project, the owner selects and contracts with the general contractor to construct a building designed by the architect. A considerable amount of research has been conducted to understand the owner’s selection factors to hire a qualified general contractor. However, the general contractor selected for the project seldom self-performs the entire construction of a building. The general contractor might self-perform some aspects of the actual building construction, but they will typically …

Adaptive Laboratory Evolution Of Scenedesmus Obliquus For Increased Carbohydrate Content And Biomass Productivity, Nahel Ali

Master's Theses

The economics of microalgal bioproduct commercialization would benefit from increased accumulation of energy storage compounds, such as carbohydrates and lipids, and increased biomass productivity. This thesis explores two adaptive laboratory evolution strategies for improving Scenedesmus obliquus: single UV-mutagenesis and low light cultivation at a high dilution rate to produce cultigens with greater carbohydrate content and iterative UV-mutagenesis and selection under outdoor conditions in a raceway pond at a high dilution rate to increase biomass productivity.

Two cultigens were generated with the goal of increased carbohydrate content: K5 and K7. Both were mutagenized for 5 seconds and cultivated in 50-mL …

Safety Considerations For All Road Users On Edge Lane Roads, Michael Williams, Marcial Lamera, Aleksander Bauranov, Carole Voulgaris, Anurag Pande

Mineta Transportation Institute

Edge lane roads (ELRs), also known as advisory bike lanes or advisory shoulders, are a type of shared street where two-way motor vehicle (MV) traffic shares a single center lane, and edge lanes on either side are preferentially reserved for vulnerable road users (VRUs). This work comprises a literature review, an investigation of ELRs’ operational characteristics and potential road user interactions via simulation, and a study of crash data from existing American and Australian ELRs.

The simulation evaluated the impact of various factors (e.g., speed, volume, directional split, etc.) on ELR operation. Results lay the foundation for a siting criterion. …

Final Report - Autonomous Wall-Climbing Robots For Inspection And Maintenance Of Concrete Bridges, Jizhong Xiao, Liang Yang, Jinglun Feng, Ejup Hoxha

Project AS-3

This project developed wall-climbing robots to carry non-destructive evaluation (NDE) devices for automatic data collection and surface/subsurface defect detection in concrete structures. By using simultaneous localization and mapping (SLAM), the robots can be located to allow for incremental 3D model reconstruction. An image dataset with pixel-level accuracy is collected and labeled to train a deep neural network (i.e., InspectionNet) with 12,000 iterations for each defect type. A ground penetrating radar (GPR)-based subsurface object detection method is proposed to implement visual inertial fusion for the estimation of the GPR pose, use a deep neural network module (i.e., DepthNet) to extract hyperbola …

Renewable Energy Generation And Ghg Emission Reduction Potential Of A Satellitewater Reuse Plant By Using Solar Photovoltaics And Anaerobic Digestion, Jonathan R. Bailey, Saria Bukhary, Jacimaria R. Batista, Sajjad Ahmad

Civil and Environmental Engineering and Construction Faculty Research

Wastewater treatment is a very energy-intensive process. The growing population, increased demands for energy and water, and rising pollution levels caused by fossil-fuel-based energy generation, warrants the transition from fossil fuels to renewable energy. This research explored the energy consumption offset of a satellite water reuse plant (WRP) by using solar photovoltaics (PVs) and anaerobic digestion. The analysis was performed for two types of WRPs: conventional (conventional activated sludge system (CAS) bioreactor with secondary clarifiers and dual media filtration) and advanced (bioreactor with membrane filtration (MBR)) treatment satellite WRPs. The associated greenhouse gas (GHG) emissions were also evaluated. For conventional …

Initial Assessment Of Liquefied Scrap Tire Concrete, Abdulkareem Kuaryouti, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

A new approach to incorporate scrap tire material into concrete was investigated, where two reclaimed waste tire components, carbon black and fuel oil, were used to replace a portion of water. The effect of “liquid tire” content to water ratios from 5-40% on an otherwise typical concrete mix were assessed, where compressive and flexural strength, flexural toughness, modulus of elasticity, and several fresh concrete properties were determined. Results were compared to typically expected results of traditional shredded tire mixes with equivalent tire content. It was found that the liquid tire mixes experienced significantly less losses of compressive strength and workability …

Flood Hazard Assessment For The Tori Levee Breach Of The Indus River Basin, Pakistan, Babar Naeem, Muhammad Azmat, Hui Tao, Shakil Ahmad, Muhammad Umar Khattak, Sajjad Haider, Sajjad Ahmad, Zarif Khero, Christopher R. Goodell

Civil and Environmental Engineering and Construction Faculty Research

Levee breaches are some of the most common hazards in the world and cause the loss of lives, livelihoods, and property destruction. During the 2010 flood in Pakistan, the most devastating breach occurred at Tori Levee on the right bank of the Indus River, downstream of the Guddu Barrage, which caused residual floods in northern Sindh and the adjoining regions of the Balochistan province. In this study, 2D unsteady flow modeling performed for Tori Levee breach computed residual flood inundation by coupling a HEC-RAS (Hydrological Engineering Centre-River Analysis System) 2D hydraulic model with remote sensing and Geographic Information System techniques. …

Open-Field Scale-Model Experiments Of Fire Whirls Over L-Shaped Line Fires, Yuto Iga, Kazunori Kuwana, Kozo Sekimoto, Yuji Nakamura

Progress in Scale Modeling, an International Journal

This paper presents the results of open-field scale-model experiments of fire-whirl formation over line fires. L-shaped line fires were burned in crosswinds, and the processes of fire-whirl formation were observed. The flame height was measured using an image-processing technique, while two-dimensional velocity components were measured at two different locations using ultrasonic anemometers. Two tests were selected for comparison: test A, in which intense fire whirls repeatedly formed, and test B, in which no whirls were observed. In test A, the wind flow was bent by the fire plume, creating swirling flows near the burning area, thereby forming fire whirls. On …

Effect Of Reduced Plume Entrainment On The Burning Rate Of Porous Fuel Beds, Sara Mcallister

Progress in Scale Modeling, an International Journal

Large outdoor fires often exhibit unexpected fire behavior, particularly compared with much smaller fires. Understanding the difference between large- and small-scale fires is of importance for both fire behavior predictions and safety. Large fires are often characterized by very tall plumes that can extend to the stratosphere. Particularly as the actively burning area increases, plumes in large-scale fires likely entrain relatively little and may act in a similar fashion to a chimney. To explore the possible changes in burning rate due to the chimney effect, experiments were conducted with wood cribs burned with a chimney of variable height. The burning …

Determination Of Vadose Zone And Saturated Zone Nitrate Lag Times Using Long-Term Groundwater Monitoring Data And Statistical Machine Learning, Martin J. Wells, Troy E. Gilmore, Natalie Nelson, John K. Bohlke

Department of Agricultural and Biological Systems Engineering: Faculty Publications

In this study, we explored the use of statistical machine learning and long-term groundwater nitrate monitoring data to estimate vadose zone and saturated zone lag times in an irrigated alluvial agricultural setting. Unlike most previous statistical machine learning studies that sought to predict groundwater nitrate concentrations within aquifers, the focus of this study was to leverage available groundwater nitrate concentrations and other environmental variables to determine mean regional vertical velocities (transport rates) of water and solutes in the vadose zone and saturated zone (3.50 and 3.75 m yr−1 , respectively). The statistical machine learning results are consistent with two primary …

Collaborative Research: 3d Ambient Noise Tomography (3d Ant) For Natural Hazards Engineering, Brady Cox

Funded Research Records

No abstract provided.

How A Low-Cost Method For Cumulative Water-Sampling Shows Need For Improvement Of Legal Public-Contact Standards In The United States, Samuel C. Kessler

Grawemeyer Colloquium Papers

Across the world, it is estimated that 4.5 billion people live near water sources “impaired” for use or contact. Standards for human-interaction are established by international organizations such as the WHO, and legislative bodies from national to local levels with jurisdiction over the quality of our waterways to ensure public & environmental health. Standards are often assessed from “grab-samples” taken from a waterbody at a certain time, with a minimum number analyzed. Water-quality standards in the United States are enforced under the Clean Water Act (CWA) via the Environmental Protection Agency (EPA), applying to “waters of the United States” (WOTUS). …

Role Of Nadþ In Regulating Cellular And Metabolic Signaling Pathways, Sara Amjad, Sabah Nisar, Ajaz A. Bhat, Ab Rauf Shah, Michael P. Frenneaux, Khalid Fakhro, Mohammad Haris, Ravinder Reddy, Zoltan Patay, Joseph Baur, Puneet Bagga

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Background: Nicotinamide adenine dinucleotide (NAD⁺), a critical coenzyme present in every living cell, is involved in a myriad of metabolic processes associated with cellular bioenergetics. For this reason, NAD⁺ is often studied in the context of aging, cancer, and neurodegenerative and metabolic disorders.

Scope of review: Cellular NAD⁺ depletion is associated with compromised adaptive cellular stress responses, impaired neuronal plasticity, impaired DNA repair, and cellular senescence. Increasing evidence has shown the efficacy of boosting NAD⁺ levels using NAD⁺ precursors in various diseases. This review provides a comprehensive understanding into the role of NAD^{+ …}

Machine Learning Enables Prompt Prediction Of Hydration Kinetics Of Multicomponent Cementitious Systems, Jonathan Lapeyre, Taihao Han, Brooke Wiles, Hongyan Ma, Jie Huang, Gaurav Sant, Aditya Kumar

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Carbonaceous (e.g., limestone) and aluminosilicate (e.g., calcined clay) mineral additives are routinely used to partially replace ordinary portland cement in concrete to alleviate its energy impact and carbon footprint. These mineral additives—depending on their physicochemical characteristics—alter the hydration behavior of cement; which, in turn, affects the evolution of microstructure of concrete, as well as the development of its properties (e.g., compressive strength). Numerical, reaction-kinetics models—e.g., phase boundary nucleation-and-growth models; which are based partly on theoretically-derived kinetic mechanisms, and partly on assumptions—are unable to produce a priori prediction of hydration kinetics of cement; especially in multicomponent systems, wherein chemical interactions among …

Spatially Variable Hydrologic Impact And Biomass Production Tradeoffs Associated With Eucalyptus (E. Grandis) Cultivation For Biofuel Production In Entre Rios, Argentina, Azad Heidari, David Watkins, Alex Mayer, Tamara Propato, Santiago Verón, Diego De Abelleyra

Michigan Tech Publications, Part 1

Climate change and energy security promote using renewable sources of energy such as biofuels. High woody biomass production achieved from short-rotation intensive plantations is a strategy that is increasing in many parts of the world. However, broad expansion of bioenergy feedstock production may have significant environmental consequences. This study investigates the watershed-scale hydrological impacts of Eucalyptus (E. grandis) plantations for energy production in a humid subtropical watershed in Entre Rios province, Argentina. A Soil and Water Assessment Tool (SWAT) model was calibrated and validated for streamflow, leaf area index (LAI), and biomass production cycles. The model was used to simulate …

Historical Contingency In Microbial Resilience To Hydrologic Perturbations, Hyun-Seob Song, James C. Stegen, Emily B. Graham, Timothy D. Scheibe

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Development of reliable biogeochemical models requires a mechanistic consideration of microbial interactions with hydrology. Microbial response to and its recovery after hydrologic perturbations (i.e., resilience) is a critical component to understand in this regard, but generally difficult to predict because the impacts of future events can be dependent on the history of perturbations (i.e., historical contingency). Fundamental issues underlying this phenomenon include how microbial resilience to hydrologic perturbations is influenced by historical contingency and how their relationships vary depending on the characteristics of microbial functions. To answer these questions, we considered a simple microbial community composed of two species that …

T112, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘T’ series spreadsheets are the raw data of all tests. (The data in this series are overall stress and strain information).

Supporting information

Pf5, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘PS’ and ‘PF’ spreadsheets are the data of the prediction and calibration tests. (The data in this series are overall stress and strain information).

Supporting information

Dem, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘DEM’ spreadsheet is the simulation results. The test information of the numerical samples is included in it.

Supporting information

Pf Series, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘PS’ and ‘PF’ spreadsheets are the data of the prediction and calibration tests. (The data in this series are overall stress and strain information).

Supporting information

Pf6, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘PS’ and ‘PF’ spreadsheets are the data of the prediction and calibration tests. (The data in this series are overall stress and strain information).

Supporting information

T113, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘T’ series spreadsheets are the raw data of all tests. (The data in this series are overall stress and strain information).

Supporting information

T144, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘T’ series spreadsheets are the raw data of all tests. (The data in this series are overall stress and strain information).

Supporting information

T514, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘T’ series spreadsheets are the raw data of all tests. (The data in this series are overall stress and strain information).

Supporting information

Strain Field_X, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘Strain field_x’ spreadsheet is the radial strain information of all the nodes. The first two columns of data are location information of the node in pixel coordinates. The third column is the information recorded at the first time, the fourth column is the information recorded at the second time, and so on.

Supporting information