Civil and Environmental Engineering Commons^™

Computational Design Of Nonlinear Stress-Strain Of Isotropic Materials, Askhad M.Polatov, Akhmat M. Ikramov, Daniyarbek Razmukhamedov

Chemical Technology, Control and Management

The article deals with the problems of numerical modeling of nonlinear physical processes of the stress-strain state of structural elements. An elastoplastic medium of a homogeneous solid material is investigated. The results of computational experiments on the study of the process of physically nonlinear deformation of isotropic elements of three-dimensional structures with a system of one- and double-periodic spherical cavities under uniaxial compression are presented. The influence and mutual influence of stress concentrators in the form of spherical cavities, vertically located two cavities and a horizontally located system of two cavities on the deformation of the structure are investigated. Numerical …

Evaluation Of Masonry Materials And Structures Using Digital Image Correlation, Brittany Bullard

Civil Engineering Theses

Masonry structures are common throughout the world. Adobe is a masonry material found in the southwestern states of the United States in residential structures. Adobe is mostly used in brick form, where locally collected sand, clay, and silt are combined with natural fibers and water to create unfired bricks. The natural fibers provide the primary reinforcement of these bricks, and aid in the drying process, helping the bricks dry evenly. While this material has been used as a residential building material for many hundreds of years, much is still not understood regarding its mechanical properties, as they are dependent on …

Assessment Of Contract Terms And Conditions For Lump-Sum Contracts, Omar Othman

Theses and Dissertations

A Contract is a tool that defines the obligations of the contracting parties and assigns the risk between them. Contracts are usually drafted to meet the interests of the owner by addressing the legal issues and liabilities. Meanwhile, less emphasis is placed on clearly communicating the contract terms and ensuring that all contracting parties comprehend their risks and obligations. In a country like Egypt, which has faced drastic economic and political changes in the past few years, and yet is experiencing a boom in the construction sector, many developers tend to draft contracts that might be legally complicated or lacks …

After A Wildfire: Water Safety Considerations For Private Wells, Andrew J. Whelton, C. Jankowski, K. Isaacsson

Resilience to Emergencies and Disasters

No abstract provided.

Context-Aware Sensing And Fusion For Structural Health Monitoring And Night Time Traffic Surveillance, Xinxiang Zhang

Electrical Engineering Theses and Dissertations

Rapid developments in computer vision technologies have been transforming many traditional fields in engineering and science in the last few decades, especially in terms of diagnosing problems from visual images. Leveraging computer vision technologies to inspect, monitor, assess infrastructure conditions, and analyze traffic dynamics, has gained significant increase in both effectiveness and efficiency, compared to the cost of traditional instrumentation arrays to monitor, and manually inspect civil infrastructures and traffic conditions. Therefore, to construct the next-generation intelligent civil and transportation infrastructures, this dissertation develops a comprehensive computer-vision based sensing and fusion framework for structural health monitoring and intelligent transportation systems. …

Characterization Of An Urban Watershed: The Case For Rowlett Creek Watershed Impaired By Bacteria And Nutrient Concerns, Heather Firn

Civil and Environmental Engineering Theses and Dissertations

Firn, Heather B.S., Southern Connecticut State University, 2009 M.S., Southern Connecticut State University, 2013

Characterization of an Urban Watershed: The Case

for Rowlett Creek Watershed Impaired by Bacteria

and Nutrient Concerns

Advisor: Professor Wenjie Sun

Master of Science conferred May, 15, 2021

Thesis completed April, 27, 2021

Water quality and its relationship with urbanization is one of many nationwide environmental concerns. Rowlett Creek is located in an urban watershed in the Dallas-Fort Worth Metroplex. Since 2014, it has been listed by the Texas Commission on Environmental Quality as impaired for bacteria and as a screening limit concern for nitrate. Water …

Exploring The Relationship Between Vehicular Emissions And Traffic Operations At Isolated Signalized Intersections, Abiral Dulal

Civil Engineering ETDs

Most roadway transportation modes still run on petroleum fuels. Petroleum fuels are major sources of air pollutants, including hydrocarbons (HC), carbon monoxide (CO), carbon dioxide (CO₂), nitrogen oxides (NO and NO₂, which are together called NOx), Volatile Organic Compounds (VOCs), and particulate matter of size(PM10) and2 and BC). Mitigating pollution is a serious issue, and therefore, it is the engineers' and planners' responsibility to study and reduce emissions as much as possible. Emission levels are generally high at street intersections, which are places where vehicles tend to accelerate, decelerate, and idle. Emission levels at intersections are …

Characterization Of Landslide Processes From Radar Remote Sensing And Hydromechanical Modeling, Yuankun Xu

Earth Sciences Theses and Dissertations

Landsides are a natural geomorphic process yet a dangerous hazard which annually causes thousands of casualties and billions of property loss in a global scale. Understanding landslide motion kinematics from early initiation to final deposition is critical for monitoring, assessing, and forecasting landslide movement in order to mitigate their hazards. Landslides occur under diverse environmental settings and appear in variable types; however, all types of landslides can be mechanically attributed to shearing failure at the basal surface due to stress regime shift contributed by internal and/or external forcing. Typical internal factors include soil/rock weathering, whereas typical external triggering forces encompass …

Interaction Of Aqueous U(Vi) With Goethite, Montmorillonite, And Uo2(S), Anshuman Satpathy

McKelvey School of Engineering Graduate Student Theses & Dissertations

Uranium contamination in subsurface environments is a matter of great concern throughout the world. Fate and transport of uranium in the subsurface can be controlled by U(VI) adsorption and reduction onto common iron (oxy)hydroxides and clay minerals. Aqueous U(VI) can also exchange uranium atoms with solids comprised of uranium which can potentially lead to changes in the morphology of the uranium-containing solids and affect their stability. First, the performance of multiple surface complexation models (SCMs) on adsorption of U(VI) onto goethite was analyzed for a broad range of input conditions. Individual models could fit the data for which they were …

A Practical Methodology To Detect, Quantify And Characterize Experimental Uncertainties In The Dynamic Testing Of Structures, James L. Woodall

Civil Engineering ETDs

This thesis investigates the uncertainty in the experimental context of structural dynamics. This thesis proposes a method to estimate both the effect of boundary conditions, as well as two different methods to detect the location of sensors on a specimen. Firstly, this thesis proposes a technique to predict the dynamic behavior of any point along a cantilever beam with an uncertain transverse elastic restraint. Secondly, this thesis investigates the estimation of the location of a sensor given the output data of a physical experiment with two different methods. Small errors in the sensor location may go unnoticed in the frequency …

Desalination For Sustainable Water Production With An Emphasis On Low Pressure Distillation, Jessica Vivian Savage

Doctoral Dissertations and Master's Theses

Freshwater resources depletion is a growing concern. This freshwater scarcity motivates research into seawater desalination as a means for alleviating the stresses on water demands. The primary methods of desalination include filtration and distillation. This paper explores the potential energy savings of vacuum distillation for seawater desalination to reduce the amount of energy needed to achieve phase change.

Depending on the vacuum boiler design, the vaporization mechanism may be boiling, evaporation, or cavitation. There is very little literature on cavitation that involves mass transfer, so cavitation is not developed here. This thesis focuses on standard models for boiling and evaporation …

Silver Bow Creek/Butte Area Npl Site Butte Priority Soils Operable Unit, Pioneer Technical Services, Inc.

Silver Bow Creek/Butte Area Superfund Site

No abstract provided.

6th Aawe Workshop Program - Conference Proceedings, Nigel Kaye

American Association for Wind Engineering (AAWE) Workshop

The Glenn Department of Civil Engineering at Clemson University is hosting the 6th AAWE Workshop with a focus on student and early career presentations. The workshop will include several keynote addresses and panel discussions on non-academic wind engineering careers and future directions for wind engineering research.

Another Dangerous Fire Season Is Looming In The Western U.S., And The Drought-Stricken Region Is Headed For A Water Crisis, Mojtaba Sadegh, Amir Aghakouchak, John Abatzoglou

Civil Engineering Faculty Publications and Presentations

Just about every indicator of drought is flashing red across the western U.S. after a dry winter and warm early spring. The snowpack is at less than half of normal in much of the region. Reservoirs are being drawn down, river levels are dropping and soils are drying out.

It’s only May, and states are already considering water use restrictions to make the supply last longer. California’s governor declared a drought emergency in 41 of 58 counties. In Utah, irrigation water providers are increasing fines for overuse. Some Idaho ranchers are talking about selling off livestock because rivers and reservoirs …

Error Prevention In Sensors And Sensor Systems, Pedro J. Chacon Dominguez

LSU Doctoral Dissertations

Achievements in all fields of engineering and fabrication methods have led towards optimization and integration of multiple sensing devices into a concise system. These advances have caused significant innovation in various commercial, industrial, and research efforts. Integrations of subsystems have important applications for sensor systems in particular. The need for reporting and real time awareness of a device’s condition and surroundings have led to sensor systems being implemented in a wide variety of fields. From environmental sensors for agriculture, to object characterization and biomedical sensing, the application for sensor systems has impacted all modern facets of innovation. With these innovations, …

Reliability Of Sfrp-Strengthened Rc Bridge Columns Subjected To Blast Loads, Ahmad Alsendi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

The reliability of reinforced concrete bridge columns strengthened with externally bonded, steel-fiber reinforced polymer fabric subjected to blast loads was investigated. Columns were modeled with a nonlinear finite element approach that considers material damage, fracture, and separation. Different concrete strengths, longitudinal reinforcement ratios, and gravity and blast load levels were considered, while uncertainties in material strength and stiffness parameters, as well as load characteristics, were incorporated in the probabilistic analysis. It was found that the use of SFRP can allow significant increases in blast load while maintaining the same level of column reliability.

Feature-Based Point Cloud-Based Assessment Of Heritage Structures For Nondestructive And Noncontact Surface Damage Detection, Richard L. Wood, Mohammad Ebrahim Mohammadi

Department of Civil and Environmental Engineering: Faculty Publications

Assessment and evaluation of damage in cultural heritage structures are conducted primarily using nondestructive and noncontact methods. One common deployment is laser scanners or ground-based lidar scanners that produce a point cloud containing information at the centimeter to the millimeter level. This type of data allows for detecting surface damage, defects, cracks, and other anomalies based only on geometric surface descriptors using a single dataset, which does not rely on a change detection approach. Moreover, geometric features are not influenced by color, which is essential for heritage structures because they are nonuniform in color due to anthropologic and environmental effects …

Examination Of The Correlation Between Shear Strength, California Bearing Ratio, And Index Properties Of Fine-Grained Soil, Billy W. Rushema

Master of Science in Civil Engineering Theses

Abstract

California Bering Ratio (CBR) is used to evaluate the strength of the pavement materials by comparing bearing capacity of the material with that of a high-quality crushed stone. This test adopted by transportation agencies and widely used in the design and analysis of pavement. Several agencies developed design thickness chart based on the CBR values of the subgrade. However, CBR test is time consuming and expensive to perform compared to shear strength test and therefore several studies have been conducted to establish correlation between shear strength and CBR. The published correlation models between CBR and shear strength of soil …

Systematic Design, Optimization, And Sustainability Assessment For Generation Of Efficient Wastewater Treatment Networks, Kirti Maheshkumar Yenkie, Emmanuel A Aboagye, Sean M. Burnham, James Dailey, Rohan Zia, Carley Tran, Maya Desai

Henry M. Rowan College of Engineering Departmental Research

Due to population growth and economic development, there has been an increase in global wastewater (WW) generation footprint. There are different technologies associated with the wastewater treatment (WWT) process. The challenge is to select technologies that minimize the cost of treatment, as well as meet purity requirements. Further, there is a need to integrate sustainability analysis to facilitate a holistic decision. With the application of systems engineering, sustainable and cost-effective solutions can be achieved. In this work, we apply systems engineering to generate a sustainable and cost-effective solution. A superstructure was generated by categorizing technologies into four treatment stages. After …

International Analysis On The Traffic Impact Of The Covid-19 Pandemic, Fanny Margaretha Kristiansson

Doctoral Dissertations and Master's Theses

The purpose of this research was to assess, compare, and contrast the impact of COVID-19 activity restrictions on road-based transportation activity in regions of the US, Sweden, and China from January 1st to December 31st, 2020. Roadway traffic volumes were used to relate the progression of reported COVID-19 cases and government directives for social separation in three countries with diverse governmental responses.

Among the contributions of this paper was the illustration of the timeline and level of public responses to closures, lockdowns, and reopening as represented through rapid traffic decreases and increases. Traffic was greatly impacted, showing that the pandemic …

Exploration Of The Sludge Biodiesel Pathway, Zachary Christman

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

Wastewater sludge is an overlooked source of fat, oil, and grease (FOG) that could be converted into biodiesel. The United States produces about 8 million tons of sludge per year. The disposal cost for this amount of sludge is about 2 billion US dollars. The widespread availability and low cost of sludge compared to other biodiesel raw materials make it an economical choice for a renewable fuel. Using sludge as a raw material can produce 25 to 30 mg per gram of fatty acid methyl ester (FAME); the main component of biodiesel. Sludge biodiesel has the potential of transforming a …

The Correlation Between Poverty, Water Quality, Community Health, And Education In Guatemala And Tanzania, Jessica R. Besnier

Senior Honors Projects, 2020-current

This paper explores the relationship between poverty, water quality, community health, and education in Tanzania and Guatemala. These metrics will allow for a thorough analysis of the relationships between the countries and will determine their impact on the other aspects in these two countries. While Guatemala and Tanzania are very different countries, they share many things in common such as inequalities among different groups, having many different groups of indigenous people, having most people living in rural areas, and are located on a coast. Also, they share similarities regarding poverty, water quality, community health, and education. By looking into these …

Unveiling Women’S Needs And Expectations As Users Of Bike Sharing Services: The H2020 Diamond Project, Andrea Gorrini, Rawad Choubassi, Federico Messa, Wafaa Saleh, Augustus Ababio-Donkor, Maria Chiara Leva, Lorraine D'Arcy, Francesco Fabbri, David Laniado, Pablo Aragon

Articles

Within the objectives of the H2020 DIAMOND project, the paper investigates women’s needs and expectations as users of the bike-sharing service managed by Syndicat Mixte Autolib et Velib Métropole in the territory of Paris Region-Petite Couronne (France). The paper presents a thematic literature review focused on gender inclusion in bike-sharing schemes. The proposed methodological approach is based on (i) Geographic Information Systems for the analysis of geolocated open datasets related to land, sociodemographic and mobility characteristics of the areas surrounding each docking stations. This was aimed at identifying a short list of suitable bike-sharing docking stations, which were further characterized …

Real-Time Pm10 Emission Rates From Paved Roads By Measurement Of Concentrations In The Vehicle's Wake Using On-Board Sensors Part 2. Comparison Of Scamper, Traker™, Flux Measurements, And Ap-42 Silt Sampling Under Controlled Conditions, Dennis R. Fitz, Kurt Bullimer, Vic Etyemezian, Hampden D. Kuhns, John A. Gillies, George Nikolich, David E. James, Rodney Langston, Russell S. Merle Jr.

Civil and Environmental Engineering and Construction Faculty Research

Representative soil was evenly applied to an 800-m section of road surface. The test area was of sufficient length to allow for measurement at constant speeds of up to 72 km hr−1. SCAMPER and TRAKER™ mobile measurement vehicles made repeated test runs while an instrumented tower measured upwind-downwind horizontal PM10 flux. AP-42 methods were used to collect silt samples and calculate PM10 emission factors. Both silt loadings and vehicle speeds were varied during the experiment. Street sweeping the as-found roadway showed an initial rise in PM10 emission rates. Both TRAKER and SCAMPER measured rapid decay of PM10 emission rates after …

Modeling Hydraulic Fracturing Initiation And Propagation In Porous Rock Formationsl, Chang Huang

LSU Doctoral Dissertations

Hydraulic fracturing has long been introduced to the oil and gas industry since the early nineteenth century for both reservoir characterization and reservoir stimulation. Despite the progress made in the last two decades, many challenges still have not been tackled regarding not only the propagation problem but also the initiation problem due to its complexity. The dissertation is divided into two stages, i.e., before and after fracture initiation. The first stage of the research aimed at improving the accuracy in solving the poro-mechanical response of wellbore during fluid injection before a tensile fracture occurs, which is crucial to determine the …

Prestressed Concrete Slabs With Bonded And Unbonded Tendons, Jasmin Abdelhalim

Theses and Dissertations

Post-tensioning concrete technology increases the resistance of flexural concrete members. This technology allows for the production of slenderer sections, and sequentially less usage of material preserving the sustainability concept in construction engineering. Post-tensioning process can be done using bonded or unbonded steel tendons. The unbonded tendons are thought to have better resistance to corrosion for structures exposed to severe environmental conditions. The unbonded tendon’s steel strands are painted with grease and covered with plastic sheathing to prevent the moisture from reaching the steel strands thus they can provide high corrosion resistance. According to the ACI 318-19 and other codes of …

Dilution Impacts On Smoke Aging: Evidence In Biomass Burning Observation Project (Bbop) Data, Anna L. Hodshire, Emily Ramnarine, Ali Akherati, Matthew L. Alvarado, Delphine K. Farmer, Shantanu H. Jathar, Sonia M. Kreidenweis, Chantelle R. Lonsdale, Timothy B. Onasch, Stephen R. Springston, Jian Wang, Yang Wang, For Full List Of Authors, See Publisher's Website.

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Biomass burning emits vapors and aerosols into the atmosphere that can rapidly evolve as smoke plumes travel downwind and dilute, affecting climate- and health-relevant properties of the smoke. To date, theory has been unable to explain observed variability in smoke evolution. Here, we use observational data from the Biomass Burning Observation Project (BBOP) field campaign and show that initial smoke organic aerosol mass concentrations can help predict changes in smoke aerosol aging markers, number concentration, and number mean diameter between 40-262 nm. Because initial field measurements of plumes are generally > 10 min downwind, smaller plumes will have already undergone substantial …

Analysis Of Covid-19 Concerns Raised By The Construction Workforce And Development Of Mitigation Practices, Makram Bou Hatoum, Ali Faisal, Hala Nassereddine, Hadi Sarvari

Civil Engineering Faculty Publications

The coronavirus outbreak has created a global health crisis that has disrupted all industries, including the construction industry. Following the onset of the pandemic, construction workers faced and continue to face unprecedented safety and health challenges. Therefore, construction employers established new safety precautions to protect the health and safety of the workforce and minimize the spread of the virus. The new precautions followed the advice and guidelines offered by different health and safety agencies like the Occupational Safety and Health Administration (OSHA), Centers of Disease Control and Prevention (CDC), and the Associated General Contractors of America (AGC). With construction projects …

Valorization Of Secondary Agriculture Residues, Narendra Kumar

Master's Theses

Secondary agriculture residues have the potential to be major contributors as resources for energy and sustainably sourced materials production. Separating secondary agricultural residues, which have already been transported to processing centers, into individual biomass components could convert these wastes into bioproducts. Many types of pretreatments to achieve this separation involve chemicals that are hazardous for the environment. Several deep eutectic solvents (DES) that are biocompatible have been investigated for their ability to deconstruct rice hulls and sugarcane bagasse. Mass yield, enzymatic hydrolysis of the pretreated biomass, fiber analysis, and Fourier transform infrared spectroscopy have confirmed that the DES formic acid:choline …

Lateral Torsional Buckling Resistance Of Continuous Steel Stringers In Existing Bridges, Dinesha Malky Kuruppuarachchi Kuruppuarachchi Appuhamilage Don

Master's Theses

Some of the Louisiana’s bridges built in the 1950s and 1960s used two-girder or truss systems, in which floorbeams are carried by main members and the continuous (spliced) stringers are supported by the floorbeams. The main members are either two edge (fascia) girders or trusses. When the flexural capacity of continuous stringers is calculated, the moment gradient factor (Cb) is not accurately calculated considering the lateral torsional buckling (LTB) at the negative moment section. In particular, the bracing effect of the non-composite concrete deck is not accounted for, and as a result, the current practice has underestimated the LTB strength …