Civil and Environmental Engineering Commons^™

Multi-Objective Hydro-Thermal Optimization Of Spiral Conformal Cooling Channels Using A Kriging-Cfd Framework, Soroush Masoudi, Barun K. Das, Majid Tolouei-Rad

Research outputs 2022 to 2026

This study presents a surrogate-based computational framework for the thermo-hydraulic optimization of spiral conformal cooling channels (CCCs) used in injection moulding applications. Sixteen design configurations were generated using Latin Hypercube Sampling and evaluated through CFD simulations to determine cooling time and pressure drop. Based on the simulation data, a Universal Kriging surrogate model was developed to describe the nonlinear relationships between channel diameter, helix pitch, channel-to-surface distance, and the resulting thermo-fluid performance. The predictive capability of the surrogate model was evaluated using leave-one-out cross-validation. The model showed excellent agreement for pressure drop prediction (R² ≈ 0.99) and good predictive accuracy …

Assessing Dissolved Organic Matter Sources And Dynamics In Urban Stormwater: Implications For Greenhouse Gases, Harper W. Schmalz

Theses and Dissertations (Comprehensive)

Stormwater management ponds (SWMPs) are important aspects of land-use planning and increasingly recognized as active sites of biogeochemical processing that influence carbon cycling; however, little research has investigated the controls on dissolved organic and dissolved inorganic carbon (DOC and DIC) within these systems. This thesis examined the processing and transformations of dissolved carbon between three compartments to support the development of a greenhouse gas (GHG) box-model for urban stormwater ponds, including SWMP sediment, surface water, and vegetation. The objective of this thesis was to assess the biogeochemical processes that govern the rate and transformation of DOC and DIC between these …

Castrip Process Technology: Non-Grain Oriented (Ngo) Si Steels Extension And Carbide-Free Bainitic (Cfb) For Flat Products, Naram Naidu Meesala

Masters Theses

"This research explores the development of advanced steel grades manufactured through Castrip® twin-roll thin strip casting technology, with particular attention to non-grain-oriented electrical Si-Steels (NGOES) and carbide-free bainitic (CFB) steels. The Castrip® process offers a near-net-shape route for producing thin steel strips, which greatly decreases the number of processing stages, lowers energy demand, and reduces carbon dioxide emissions when compared with traditional steel production methods.

In the NGOES part of the study, several industrial Fe–Si steel compositions were cold rolled to final thicknesses ranging from 0.35 mm to 0.15 mm. These materials were then exposed to short-duration continuous annealing at …

A Real-Time Autonomous Mobile Robotic System For Crack Detection And 3d Laser Profiling In Construction Using Two-Stage Deep Learning, Emmanuella Ogun

College of Graduate Studies: Theses & Dissertations

This thesis presents an autonomous mobile robotic system that integrates real-time visual crack detection with laser-based three-dimensional profiling for building inspection. The system coordinates SLAM-based navigation, deep learning perception, and manipulator-guided measurement within a unified ROS 2 framework, enabling scan-on-demand workflows where laser profiling occurs selectively at visually detected defect locations. The detection pipeline employs a two-stage architecture combining U-Net semantic segmentation with Pix2Pix residual refinement, achieving 73.9% mean intersection-over-union and 76.4% F1-score on the CrackSeg9k benchmark while maintaining 16 frames-per-second real-time throughput. Real-world validation demonstrated 95% detection success on 80 campus images under challenging conditions. The profiling subsystem utilizes …

Feasibility Of Quantifying The Dosage Of Zycotherm In Its Modified Asphalt Binders, Susmita Acharjee

College of Graduate Studies: Theses & Dissertations

The quantification of low-percentage additives in asphalt binders is challenging due to their minimal concentration and the complex composition of the binder matrix. Zycotherm, a nano-organosilane anti-stripping additive, is typically used in very small dosages (0.05%–0.20%), making its detection and quantification particularly difficult. This study investigated the feasibility of estimating Zycotherm dosage in asphalt binders by examining chemical and rheological and moisture responses. Two asphalt binder grades, PG 64-22 and PG 76-22, were modified with Zycotherm at dosages of 0.05%, 0.10%, 0.15%, and 0.20% by weight of binder, along with corresponding base binders. Laboratory experiments were conducted using Fourier Transform …

Pile Setup Effects On Driven Piles In Southeastern Coastal States, Peya Sharif

College of Graduate Studies: Theses & Dissertations

The resistance of driven piles typically increases with time after installation, a phenomenon known as pile setup. This behavior is primarily associated with the dissipation of excess porewater pressure and the progressive reconsolidation of soil surrounding the pile shaft, particularly it is observed in cohesive soils. Although several empirical and analytical models have been proposed to estimate pile setup, their practical implementation in foundation design remains limited due to uncertainties associated with soil conditions, pile geometry, resistance variability, and time dependent behavior. To address some of these uncertainties, this study collected 221 pile load test data at the End of …

Numerical Investigation Of The Influence Of Fiber Content On The Shear Performance Of Uhpc Deep Beams Reinforced With Hybrid Steel And Synthetic Fibers, Hossein Mirzaaghabeik, Sanjay Kumar Shukla, Nuha S. Mashaan

Research outputs 2022 to 2026

This study investigates the shear performance of ultra-high-performance concrete deep beams (UHPC-DBs) reinforced with hybrid fibers comprising 5D steel fibers and Forta-Ferro (FF) synthetic fibers. UHPC-DBs are widely used in bridges, piles, and transfer girders because of their high load-bearing capacity. Although fiber content strongly influences shear behavior, the contribution of synthetic fibers in hybrid systems remains insufficiently understood. To address this gap, finite element analysis based on the concrete damage plasticity (CDP) model was developed in ABAQUS and validated using experimental results from five previously tested UHPC-DBs with different fiber contents. Load–deflection response, crack patterns, shear capacity, mid-span deflection, …

Exploring The Interplay Of Operational Conditions, Microbial Communities, And Water Quality In Drinking Water Ozone-Biofiltration, Kara Yvonne Cunningham

Graduate Theses, Dissertations, and Problem Reports (ETD)

Ensuring reliable access to safe drinking water is a growing global challenge as water utilities face variable source water quality driven by population growth, land‑use change, and climate change impacts. To address these challenges, utilities are implementing advanced treatment technologies designed to improve reliability under variable source water conditions. Ozone-biofiltration has emerged as a treatment approach that can reduce a wide range of natural and anthropogenic contaminants. However, despite its increased use, there is limited insight into the biological processes shaping filter function or how they respond to operational and environmental changes. Advances in molecular microbiology and high-throughput sequencing now …

Feasibility Study Of Concurrent Removal Of Organics And Ammonium Using An Iron Dosed Upflow Anaerobic Sludge-Blanket Bioreactor, Morgan Elizabeth Amos

Graduate Theses, Dissertations, and Problem Reports (ETD)

Aerobic microbial reactions have commonly been utilized in treatment processes to oxidize and remove organics and nitrogen through aeration, using processes such as nitrification that converts ammonium (NH₄⁺) into nitrite (NO₂^-) and nitrate (NO₃^-). Anoxic microbial reactions like denitrification often require organic compounds as an external source to chemically reduce the oxidized nitrogen (NO₃^- and NO₂^-) to nitrogen gas (N₂) for nitrogen removal from the liquid phase. These mainstream processes have a high chemical cost and energy footprint which results in an increased release …

Using Aqueous Geochemistry Of Acid Mine Drainage To Spatially Investigate Concentrations Of Rare Earth Elements Throughout West Virginia, Pennsylvania, And Maryland, Elyssa Lynn Allen

Graduate Theses, Dissertations, and Problem Reports (ETD)

Rare earth elements (REEs) are an important commodity utilized in many industries such as electronics, defense, manufacturing, medicine, and green energy production. A lack of economical domestic sources forces the United States to import a majority of its supply, and incentivizes novel methods of acquisition. Mining regions of the United States, such as Appalachia or the West, are afflicted with acid mine drainage (AMD) impacted surface waters. REEs occur in varying concentrations within coal seams, indicating that coal and its waste are potential avenues of recovery that might also incentivize the remediation of coal impacted areas. Understanding spatial and geochemical …

Shm For Incipient Buckling Detection In Overloaded Structures Using Nonlinear System Identification Algorithms On Redundant Data Sets, Padmanabh Shridhar Desai

Dissertations, Master's Theses and Master's Reports

Structural health monitoring (SHM) detects and characterizes damage to predict failure, but failures such as buckling, which are not predicated on traditional damage modalities, are harder to detect. Direct load measurements are costly and difficult to implement (especially for dead loads) as they require copious numbers of sensors, which must be installed before loading is present. Vibration-based detection is a good alternative because it can infer global structural characteristics with relatively few sensors. This dissertation presents an SHM approach for detecting incipient buckling in structures under excessive loads based on non-linear models fit from measurements of small lateral vibrations due …

Study Of Bearing Capacity Testing And Soil Preparation Techniques In Lunar Highlands Simulant At Field Scale, Christi A. Lecaptain

Dissertations, Master's Theses and Master's Reports

Humanity seeks to return to the surface of the Moon with the advent of the Artemis missions. These endeavors plan to be the beginning of a new era as NASA and other space organizations seek to establish a lunar base. Ahead of any astronauts or mining infrastructure, the physical groundwork will need to be laid to support the arrival of rockets, boots, and rover wheels. As surfaces are prepared, they will need to be tested and verified to ensure the stability of any structures placed on top. Understanding the bearing capacity is vital to soil quality testing. A standard terrestrial …

Applying Transfer Learning For Street-Scale Nuisance Flood Forecasting In Coastal-Urban Environments, Binata Roy, Jonathan L. Goodall, Diana Mcspadden, Chetan Kumar, Steven Goldenberg, Yidi Wang, Malachi Schram

Data Science Faculty Publications

An important challenge with Machine Learning (ML) is its transferability; that is, whether an ML model trained on one set of data can be applied to a second set of data without requiring full retraining of the model. Transfer Learning (TL) addresses this challenge by transferring knowledge learned in the source domain (the data it was trained on) to the target domain (a second set of data that is statistically different but related, which the model was not trained on). This study investigates the use of TL for street-scale nuisance flood forecasting by exploring whether an ML model trained for …

Sustainable Nutrient Management Opportunities For Small Communities In The U.S. With Lagoon Wastewater Treatment Systems, Denis Sigei Ruto

Graduate Theses, Dissertations, and Problem Reports (ETD)

Lagoon wastewater treatment systems are among the most widely used secondary treatment technologies serving small and rural communities in the United States due to their low capital and operating costs, minimal energy requirements, and operational simplicity. While effective for removal of organic matter and suspended solids, most lagoon systems were not designed to achieve advanced nutrient removal. As regulatory priorities increasingly emphasize control of total nitrogen and total phosphorus to protect receiving waters and public health, lagoon-dependent communities face growing compliance challenges. These challenges are exacerbated by aging infrastructure, limited technical capacity, financial constraints, and insufficient infrastructure data, highlighting the …

A Novel Federated Llm Framework For Distributed Traffic Modelling In Intelligent Transportation Systems, Seerat Kaur

Theses and Dissertations (Comprehensive)

Intelligent transportation systems (ITS) depend on accurate traffic prediction to support congestion management, infrastructure planning, and real-time operational decisions. Despite substantial progress in data-driven forecasting, several challenges continue to limit practical deployment: traffic data is distributed across independent regional authorities, making centralized aggregation infeasible, standard federated aggregation strategies ignore traffic-specific characteristics that meaningfully affect model quality, and existing models produce only numerical outputs without interpretable reasoning that urban planners can act upon. This thesis addresses these challenges through four contributions that collectively advance privacy-preserving, explainable, and scalable traffic forecasting.

The first contribution provides a systematic review of 129 peer-reviewed publications, …

Low-Energy Co2 Sequestration Via Palm Waste Biochar Activated With Carbide Lime For Mineral Carbonation Of Industrial Wastes, Maisa El Gamal, Ameera F. Mohammad, Basim Abu-Jdayil, Imen Ben Salem, Suhaib Hameedi

All Works

A sustainable method for enhancing CO₂ capture and sequestration was developed by accelerating the carbonation of alkaline industrial wastes using carbide lime-activated biochar (BC(CLW)), an alkaline by-product of acetylene production. The biochar was produced from palm tree waste through slow pyrolysis at 400 °C, followed by activation with carbide lime slurry to enhance its alkalinity, surface basic sites, and reactivity toward CO₂. Three industrial residues, namely ladle furnace slag (LF), baghouse dust (BH), and cyclone silo dust (CD), were blended with 0, 5, 7, and 10 wt. % BC(CLW) and carbonated under ambient conditions. Characterization by thermogravimetric analysis (TGA), Fourier-transform …

Workshop Outcomes Report: 2nd International Workshop On Seismic Resilience Of Arctic Infrastructure And Social Systems, Majid Ghayoomi, Daniela Morganti

Faculty Publications

The report provides an overview of the second international workshop on Seismic Resilience of Arctic Infrastructure and Social Systems. The report discusses agenda, workshop activities, interdisciplinary working groups, and results. It ends with several strategic questions and investigation plans that were developed as part of the workshop activities.

Smart Dynamic Concrete: Effect Of Coarse Aggregate Size Distribution On Fresh, Mechanical And Durability Properties, Venu Sipelli, Kamineni Aditya, Shravya Sripadapu

Mansoura Engineering Journal

SDC is a self-flowing concrete that demonstrates improved material efficiency through optimized aggregate gradation. Unlike SCC, which relies on high powder content for improved flowability, SDC provides improved flowability by optimized aggregate gradation, making it a promising alternative to SCC. This paper presents the fresh, mechanical, and durability performance of M40-grade SDC using OPC 53 grade cement, GGBS, CRF, and polycarboxylate-based superplasticizer. A constant cementitious content of 470 kg/m³ and water–cement ratio of 0.38 were maintained. The fresh, mechanical, and durability performances of SDC using three types of coarse aggregate combinations, namely, 70% 10 mm + 30% 20 mm, 75% …

Roadway Runoff Impacts To Trout Streams Studies For Ms4 Permit, Jobayed Hossain Badhan

College of Graduate Studies: Theses & Dissertations

Roadway runoff from Georgia Department of Transportation (GDOT) highway infrastructure poses measurable, but temporally constrained threats to cold-water trout ecosystems in northern Georgia. This study investigates temperature and dissolved oxygen (DO) dynamics in three secondary trout streams receiving GDOT roadway discharges, with the primary objective of evaluating compliance with Georgia Rule 391-3-6-.03(6)(ii),(v) under the Municipal Separate Storm Sewer System (MS4) permit framework. Field monitoring was conducted from April 2024 through October 2025 across two consecutive summer seasons using a tiered, multi-instrument approach: YSI ProDSS handheld grab sampling provided regulatory-grade reference measurements; HOBO MX-801 optical DO dataloggers recorded continuous 5-minute-interval temperature …

Synergistic Removal Of Microplastic Fibres: Integrating Chitosan Coagulation In Hybrid Water Pre-Treatment Systems, Jayasuriya Arachchilage Nimesha Thathsarani

Theses: Doctorates and Masters

Microplastic fibres (MPFs) are the most prevalent form of microplastics detected in the influents of water and wastewater treatment plants. Owing to their elongated shape and low density, MPFs frequently evade removal even during tertiary processes such as membrane filtration. Enhancing pretreatment, particularly through cost-effective coagulation-flocculation can reduce the treatment burden on downstream systems. However, conventional inorganic coagulants often necessitate high dosages and can leave residual ions, posing environmental concerns.

As a sustainable alternative, the use of environmentally friendly coagulants such as Chitosan has gained attention for MPF removal. While Chitosan exhibits favourable qualities, its practical application is hindered by …

Process Optimization And Quality Control In Manufacturing Of Frp Composites By Vartm, Mohamed Emadeldin Omar Abdelhadi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Railroad tank cars, being one of the most used means of transportation of hazardous material across the country, have not been structurally upgraded for a long time. Thus, the Pipeline and Hazardous Materials Safety Administration (PHMSA), a United States Department of Transportation (USDOT) agency, released a rule for safer transportation of highly hazardous and flammable liquids by railroad to enhance the design specifications of both the new and existing tank cars in May 2015. A multifunctional composite jacket is proposed as a new material to structurally enhance the railroad tank cars to withstand any accidents that could happen en route. …

Moving From Feasible Solutions To Sustainable Systems In The Built Environment, Mohammed Ali Berawi, Mustika Sari, Perdana Miraj

CSID Journal of Infrastructure Development

The built environment plays a crucial role in global sustainability efforts. Buildings, infrastructure, and cities consume large amounts of energy and materials that shape social behavior, and lock in environmental impacts. Over the past two decades, research has produced a wide range of technical solutions to reduce these impacts. Renewable energy systems, energy-efficient buildings, alternative construction materials, and new construction methods are no longer experimental concepts. Many have proven technical and economic potential. Yet, real-world transformation remains slow and uneven. This gap suggests that sustainability challenges in the built environment are no longer driven by a lack of technology. Instead, …

Barriers To The Adoption Of Modular Construction Technology In South Africa, Mokete Matoba, Christopher Amoah

CSID Journal of Infrastructure Development

Construction, mining, and manufacturing are the most significant contributors to South Africa's GDP. While manufacturing and other industries utilise advanced technologies to enhance productivity, he construction industry continues to lag behind in technological adoption. This study examines the barriers that hinder the South African construction industry from leveraging the benefits of modular construction technologies (MCT). The study employed a quantitative research method, using closed-ended questions to collect data. The questionnaires were emailed to South African construction industry professionals selected through a combination of purposive and convenience sampling. A total of 98 questionnaires were distributed, of which 46 were returned. However, …

Effects Of Calcination Conditions Of Locust Bean Pod On The Mechanical Properties Of Locust Bean Pod Ash High-Strength Concrete, Iorwuese Anum, Umar Abdullahi, Megat Azmi Megat Johari, Felix Nkapheeyan Isa

CSID Journal of Infrastructure Development

Locust Bean Pod Ash (LBPA) is produced from the calcination of Locust Bean Pod (LBP), an agricultural waste of the African locust bean tree (Parkia biglobosa). This study evaluated the use of LBPA obtained through controlled calcination and open burning as a supplementary cementitious material (SCM) in high-strength concrete (HSC). Cement was replaced by LBPA at 5%, 10%, 15%, and 20% by weight using both ashes—LC for ash produced through calcination at 600 °C, and LO for ash obtained through open burning. Slump and strength were assessed, including compressive strength (100 × 100 × 100 mm cubes) and splitting tensile …

Green Connectivity In Metropolitan Jabodetabek: Climate Change And The Challenge Of Urban Forest, Safira Maharani Putri, Hendricus Andy Simarmata

CSID Journal of Infrastructure Development

Urban areas in Indonesia, particularly the Greater Jakarta metropolitan region (Jabodetabek), are increasingly experiencing the adverse effects of climate change, such as the Urban Heat Island (UHI) phenomenon. Rapid urbanization has contributed significantly to rising greenhouse gas emissions and deteriorating environmental quality. Urban forests are one of the key solutions to mitigate these impacts; however, their spatial distribution in Jabodetabek remains suboptimal and poorly connected. This study uses NDVI as a proxy for urban forest density, where “urban forest” refers to vegetated areas within cities as defined by Presidential Regulation No. 60/2020. The research addresses the following question: How has …

Enhancing Health And Safety Practices In Construction Site In Developing Nations Through Technology Advancement In South Western Nigeria, Mubaraq Lawal, Abba Mahmud, Ismail Gbolahan Dere, Thankgod Agbo Owoicho

CSID Journal of Infrastructure Development

The construction sector plays a critical role in urban development and economic growth, yet it continues to face major challenges that threaten worker health and safety. Traditional safety measures are not always sufficient for the complex conditions found on construction sites, which creates a need for technology‑based solutions. This study investigates the relationship between technology adoption and health and safety practices in the construction industry in Lagos, Nigeria. The study identifies the major causes of site accidents, examines the level of technology use on construction sites, and reviews existing literature through both primary and secondary data. Primary data were collected …

Exploring The Horizontal Static And Dynamic Shading Devices To Minimize Cooling Load In Tropical Buildings, Hilmi Fitriatulamal, Ova Candra Dewi, Miktha Farid Alkadri, Kartika Rahmasari

CSID Journal of Infrastructure Development

Shading devices are essential for reducing solar radiation and cooling loads in buildings located in tropical climates. In the Jakarta region, the highest solar factor is observed on west- and east-facing facades, followed by north- and south-facing orientations. National building policy in Indonesia encourages facades to face north–south to reduce solar heat gain. This study explores horizontal static and dynamic shading devices on north-facing facades and evaluates their impact on cooling load reduction and daylight performance. The methodology includes calculating and simulating energy use intensity (EUI) using EnergyPlus and conducting illuminance analysis using Radiance and Grasshopper. Key parameters considered in …

Effect Of Local Steel Slag Incorporation On The Mechanical Properties Of Concrete, Ahmed Safaa Tariq Karmah, Wissam Khadum Alsaraj, Luma A. Zghair

Al-Esraa University College Journal for Engineering Sciences

The increasing interest in the production of concrete through the utilization of inexpensive materials has caused a rise in the number of studies concerning the use of materials with cementitious properties, such as Silica Fume, Slag, Fly Ash and other pozzolanic materials. Moreover, the increasing amounts of Steel Slag being produced from local factories that are being deposited without an available method of disposal provides an opportunity to harness the Slag in the production of an inexpensive, and possibly better concrete. Slag has been used as both an addition and substitution of the cement and fine aggregate. The mixtures included …

Decoding Climate Change: A Comprehensive Statistical Insight Into Temperature Anomalies In Iraq And Its Neighboring Countries, Jameel T. Al-Naffakha, Mohammed R. Al-Qassabanda, Israa Jafar

Al-Esraa University College Journal for Engineering Sciences

This study applies advanced statistical techniques, including the Mann-Kendall Trend Test and ARIMA forecasting, to validate and predict temperature anomalies across Iraq and its neighboring countries (2014–2024). Findings confirm a statistically significant warming trend (p < 0.00000005) across all nations, with Syria (1.02°C) and Turkey (0.97°C) experiencing the highest anomalies. GIS-based spatial analysis highlights regional disparities, identifying climate-vulnerable zones. The persistent rise in temperature anomalies correlates with worsening water scarcity, desertification, and extreme weather events, including prolonged droughts and heatwaves. Iraq’s peak anomaly (1.48°C) has exacerbated heat stress, agricultural decline, and reduced river inflows, while Kuwait and Saudi Arabia struggle to maintain critical infrastructure under record-breaking temperatures exceeding 50°C. These climate shifts pose severe risks to water availability, food security, and energy demand, necessitating urgent policy interventions. Key recommendations include enhanced water resource management, climate-adaptive agriculture, and renewable energy expansion. If left unaddressed, rising temperatures could destabilize the region, increasing socio-economic vulnerabilities and escalating resource conflicts. This study underscores the need for cross-border collaboration and sustainable adaptation policies to mitigate the long-term impacts of climate change in the Middle East.

Optimal Power Flow Control In The Iraqi Power Grid Using Artificial Intelligence Algorithms For Carbon Emission Reduction, Mohammed Shakir Juber

Al-Esraa University College Journal for Engineering Sciences

Iraq’s power sector remains in a protracted and severe crisis characterized by a significant mismatch between supply and demand, high levels of losses during transmission and distribution, as well as an increasing challenge to the resources base being largely unfavourably. These inefficiencies impose heavy costs on the national economy in excess of 40 billion annually and they also reinforce greenhouse gas emissions, and exacerbate environmental issues. To deal with these problems, we proposed in this paper that a new hybrid AI tool should be developed for the solution of multi-objective optimization problem based on purpose Genetic Algorithm (GA) merger with …