Buckling Analysis Of Auxetic Composite Laminates And Optimal Design Using Lamination Parameters And Machine Learning, Hans Bendon Maria Tamil Selvan

Mechanical and Aerospace Engineering Theses

Composite materials are widely used as structural panels in aerospace, automotive, and civil engineering applications, where buckling is often a critical failure mode. This thesis focuses on the analysis and design of composite laminates that maximize buckling performance under prescribed stiffness and thickness constraints.

The first part of the study investigates the buckling behavior of auxetic laminates, which exhibit a negative Poisson's ratio. While previous studies suggest that auxetic laminates can achieve higher critical buckling loads than non-auxetic laminates under simply supported boundary conditions with lateral restraint, the influence of other boundary conditions and plate aspect ratios has not been …

Flood Damage And Social Vulnerability In Coastal New Hampshire, Mitchell S. Berry

Honors Theses and Capstones

This study investigates the relationship between flood-induced building damage and social vulnerability in coastal New Hampshire, with a focus on communities increasingly affected by sea-level rise, storm surge, and high tide events. Using a dataset of 2,528 single-family homes, the analysis integrates flood depth maps (coastal, pluvial, and fluvial), building-level damage estimates, and a housing-burden-based metric to assess how physical and social factors interact to shape flood impacts. Results show that flood depth is the primary driver of building damage, with the most severe impacts concentrated in coastal areas experiencing deeper inundation. However, when buildings are grouped by vulnerability, higher …

A Transdisciplinary Approach To Advancing Water Security And Public Health: The “Nurse + Engineer” Model For Achieving Sustainability In Wash Systems Using Community-Based Participatory Research, Daniel B. Oerther, Sarah Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Human health is linked to the health of the environment, a concept referred to as planetary health. As environmental challenges become increasingly complex, single-disciplinary approaches are insufficient to achieve sustainable solutions. This article presents a transdisciplinary framework, termed the "Nurse + Engineer" model, as a novel methodology for addressing complex problems at the nexus of environmental engineering and public health. The model integrates the technical design and systems-level thinking of environmental engineering with the community-based, patient-centered care of nursing. This work details the key lessons learned from the retrospective application of this framework to a series of multi-year, community-based participatory …

Environmental Engineers Develop Solutions To Problems Of Planetary Health: The Legacy Of Professor P. Aarne Vesilind, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The principal ethical obligation of the engineering profession, to "hold paramount the health, safety, and welfare of the public," has been challenged for decades. Professor P. Aarne Vesilind identified two primary deficiencies: an anthropocentric bias that values nature only instrumentally and the use of non-mandatory, aspirational language for environmental protection, which resulted in the exclusion of enforceable environmental canons. This paper argues that two recent developments provide a comprehensive response to Vesilind's recommendations for engineering ethics. First, the United States Bureau of Labor Statistics has redefined environmental engineering as "developing solutions to problems of planetary health." Second, Oerther proposed a …

Assessing Water Quality In Drinking Water Distribution Systems: Rural Infrastructure Challenges, Hydrodynamic Effects On Biofilms, And Biofilm Contribution To Disinfection By-Products Formation, Vinila Vasam

Graduate Theses, Dissertations, and Problem Reports (ETD)

Access to clean and safe drinking water remains one of the most persistent public health and environmental challenges in the United States. Maintaining water quality after leaving the treatment plant in drinking water distribution systems (DWDS) is a complicated and often overlooked challenge. Most research focuses on water treatment and source water quality, but not on the miles of pipe that follow. Aging infrastructure, complex flow patterns in the DWDS, and limited resources make water quality management especially difficult. This dissertation includes three core studies: 1) A system-level analysis of small and rural utilities in the geographically complex region of …

Assessment Of Emissions Factors For Produced Water And Other Atmospheric Liquid Storage Tanks On Natural Gas Sites, David Glenn Childs

Graduate Theses, Dissertations, and Problem Reports (ETD)

As the US natural gas (NG) sector continues to grow, concerns have increased regarding the effects and increasing volume of greenhouse gases emitted into the atmosphere. While NG is a cleaner burning fuel than diesel and gasoline, unburned methane (CH₄) has a global warming potential (GWP) 27-30 times that of carbon dioxide (CO₂). To better quantify CH₄ emissions on NG sites, the US Department of Energy (DOE) granted West Virginia University (WVU) funding to collect direct measurements at well sites and compressor stations.

In this work, a total of 18 sites, including controlled and uncontrolled …

Evaluation Of Engineering Controls In Mitigation Of Fecal And Chloride Contamination To An Urban Stream, Gabriel J. Zenny

Graduate Theses, Dissertations, and Problem Reports (ETD)

Fecal coliform contamination is a major contributor to surface water pollution in the United States’ (U.S.) waterways, whether from combined sewer overflows (CSOs) (point source pollution), runoff from precipitation and snowmelt (nonpoint source pollution), or exfiltration from aging and failing infrastructure. In addition to fecal bacteria, chloride contamination is also a major, prevalent surface water contaminant impacting U.S. waterways. Chloride contamination is predominantly released into U.S. waterways as nonpoint source pollution, endemic to northern areas that use industrial brine and salt as a form of mitigation for ice accumulation on roadways. The purpose of this research was to investigate impairment …

Student Support In Civil And Environmental Engineering, Heather Marie Rice

Graduate Theses, Dissertations, and Problem Reports (ETD)

Many student support services target first-year engineering students to help improve their transition from high school to college and to reach first-year retention goals. These opportunities are communicated to students through a variety of ways. The objectives of this work are to evaluate student perspectives of student services support factors in a civil and environmental engineering program and investigate how student support services and opportunities are communicated to students in a civil and environmental engineering program. The media identified for student support service outreach were the fundamentals of engineering program newsletters, academic advising newsletters, Statler eNews newsletters, and the bulletin …

Experimental Evaluation Of 100 Ft X 10 Ft Frp Truss Pedestrian Bridge, Ashish Dhital

Graduate Theses, Dissertations, and Problem Reports (ETD)

ABSTRACT

Experimental Evaluation of 100 ft x 10 ft FRP Truss Pedestrian Bridge

Ashish Dhital

FRP truss bridges are now increasingly used in pedestrian bridge applications due to their high strength-to-weight ratio, corrosion resistance, better impact performance compared with conventional materials, and ease of assembly. These advantages make FRP systems attractive for accelerated construction, remote-site installation, and environments where steel or reinforced concrete bridges may experience corrosion-related deterioration. Due to insufficient data on both strength and serviceability (i.e deflection, frequency) performances. Full-scale testing of FRP pedestrian bridges of longer spans (50’-100’) is needed to better understand the dynamic behavior, long-term …

Application Of Passive Samplers For Exploring Remedial Progress In The Torch Lake Aoc And Interlake Variability Of Pcbs, Cailin B. Bishop

Dissertations, Master's Theses and Master's Reports

This study evaluates changes in dissolved polychlorinated biphenyl (PCB) concentrations in Torch Lake, Michigan, an Area of Concern shaped by decades of legacy contamination and evolving restoration policy. Passive samplers deployed across sites and seasons (2024–2025) show total PCB concentrations ranging from below detection to 110 pg/L (mean = 16.8 pg/L), representing an approximate 90% decline since 2005. Comparisons with regional reference lakes indicate no statistically significant difference (p = 0.84), suggesting concentrations may approach background atmospheric levels despite continued variability. Congener profiles indicate a shift toward lower-chlorinated PCBs, though interpretation of higher-chlorinated congeners is limited by slow sorption kinetics. …

Performance Comparison Of A Low Mass Vibratory Lunar Surface Compactor In Vacuum Versus Atmosphere, Robin D. Austerberry

Dissertations, Master's Theses and Master's Reports

As space agencies prepare to return to the moon, an emphasis is being placed on establishing a sustained human presence that requires permanent structures and supporting infrastructure, making site preparation a critical factor. Michigan Technological University’s Planetary Surface Technology Development Lab has developed a novel low-mass surface compaction tool for use on a site preparation vehicle in collaboration with Colorado School of Mines. Testing in vacuum is necessary to simulate a relevant environment, which is required to increase the technology readiness level of this tool to TRL 5. Testing concluded significant interactions between the presence of atmosphere and other factors. …

A Hybrid Cnn-Lstm Surrogate Model For Hyper-Resolution Spatiotemporal Flood Forecasting In Norfolk, Virginia, Yidi Wang, Jonathan L. Goodall, Chetan Kumar, Diana Mcspadden, Sergio A. Barbosa, Binata Roy, Ali Shahabi, Navid Tahvildari

Data Science Faculty Publications

Study region

Norfolk, Virginia, United States

Study focus

Accurate and timely flood forecasting is essential for enhancing resilience in coastal urban areas in the context of increasing frequency and intensity of rainfall, sea level rise and urbanization. This study presents a hybrid deep learning-based surrogate model that integrates Convolutional Neural Networks (CNN) and Long Short-Term Memory (LSTM) networks to enable real-time spatiotemporal flood forecasting. The model leverages CNN to capture spatial features from inputs such as elevation and Topographic Wetness Index (TWI), while LSTM processes time-series inputs of rainfall and tide data to capture temporal features.

New hydrologic insights for …

Enhancing Traffic State Estimation At Bottlenecks Through Improved Demand Modeling: A Greenshields-Grounded Approach, Yuyan Annie Pan, Xianbiao Hu, Qing Tang, Yanyan Chen, Xuesong (Simon) Zhou

Civil & Environmental Engineering Faculty Publications

Accurate estimation of traffic state under oversaturated conditions is fundamental to a wide range of transportation applications. While intuitive, volume-to-capacity (q/qc) ratio-based link performance functions (LPF) are challenged by the U-shaped pattern of real-world speed-flow plots, which contradict the monotonic assumptions of link performance models such as the Bureau of Public Roads (BPR) function, particularly when q/q_c ≥ 1. This study addresses this critical gap by proposing an enhanced demand estimation method grounded in the Greenshields model, incorporating a real-time inflow correction factor to more accurately capture traffic demand at bottlenecks. In parallel, a modified LPF is introduced, replacing …

Element-Based Predictive Modeling Of Hydrothermal Liquefaction Bioproducts Derived From Corn Stover, Isamu Umeda, Meicen Liu, Yi Zheng, Jiefu Wang, Zhiwu Wang, Sandeep Kumar

Civil & Environmental Engineering Faculty Publications

The hydrothermal liquefaction (HTL) process offers an energetic advantage over pyrolysis because it does not require prior drying of the biomass feedstock. However, there are significant challenges in simultaneously estimating both the yields and characteristics of products from the HTL of biomass with theoretical support. This study developed a unique element-based kinetic model to predict the yields, higher heating values, and fuel characteristics of solid residue and heavy bio-oil, based on the temperature, residence time, solid loading, and elemental composition (C, H, N, and O) of corn stover. Furthermore, the model predicted the weights of dissolved carbon and nitrogen in …

Nonstationary Spatial Correlation Of Earthquake Ground Motions In California, Pengfei Wang, Busra Bocekli, Junhui Yang, Scott J. Brandenberg, Jonathan P. Stewart

Civil & Environmental Engineering Faculty Publications

Assessing seismic risk to spatially distributed infrastructure systems requires realistic representations of spatially correlated ground motions. Existing models for the spatial correlations of ground motions rely on strong second-order stationarity assumptions, under which the correlation structure is assumed to be invariant across space, potentially masking regional variations. Because repeatable site and path effects can vary spatially, the resulting correlation structure is likely to be nonstationary. We propose a nonstationary spatial correlation method that captures geographically varying correlation decay behavior. We compute site-to-site Pearson correlations of within-event residuals using earthquakes recorded at both sites in each site pair and model the …

From Comparison To Integration: Building Energy Simulation Tool Variability And The Case For Intelligent Retrofit Workflows, Amir Safari, Dalya Ismael, Mahsa Safari, James Freihaut

Engineering Technology Faculty Publications

As the urgency to address climate change and modernize energy infrastructure grows, the building sector plays a key role in improving energy efficiency and reducing carbon emissions. This study evaluates five energy retrofit strategies for Building 101 at The Navy Yard in Philadelphia, comparing two real-world proposals from energy service companies with three simulation-based packages derived from Building Energy Simulation (BES) tools. The study examined whether advanced BES tools provide greater accuracy and decision-making value compared to simpler alternatives. Electricity savings ranged from 5 % to 40 %, gas savings from 29.7 % to 61 %, and annual cost reductions …

Adaptive Electric Vehicle Routing And Charging With Deep Reinforcement Learning, Mandana Farhang Ghahfarokhi, Hyoshin Park, Venktesh Pandey, Gyugeun Yoon

Engineering Management & Systems Engineering Faculty Publications

As electric vehicles (EVs) gain popularity, efficient routing and charging solutions remain challenging due to time-dependent travel variability, sparse charging infrastructure, and heterogeneous user preferences. To address these challenges, this paper introduces a decision-support system that integrates three complementary methods: Temporal Multimodal Multivariate Learning (TMML) for real-time characterization of travel time uncertainty, Time-Dependent Shortest Path (TDSP) for reliability-aware route choice, and Deep Q-Network (DQN) reinforcement learning for adaptive charging decisions in sparse infrastructure environments. TMML updates link-level travel time distributions in real-time through Bayesian inference with cluster-based propagation, reducing uncertainties across the network. TDSP leverages these updated distributions to estimate …

Stress-Strain Behavior Of Saturated Clays From Vane Shear Test Results: A Numerical Approach, Gustavo Rodrigues De Avila Oliveira

Master’s Theses

The vane shear test (VST) is widely used to estimate the undrained shear strength of soft cohesive soils; however, it does not directly provide constitutive information such as the stress–strain response. Smoothed Particle Hydrodynamics (SPH), a mesh-free numerical method, offers an attractive alternative for modeling the large deformations involved in the VST and extracting additional information from the test.

This study develops and calibrates a two-dimensional SPH model to simulate the field vane shear test and investigate the stress–strain behavior of soft soils. The VST was implemented within an SPH framework, while field and laboratory data were used to define …

The Development Of A Convenient And Consistent Methodology For Flight Proficiency To Certify Multi-Rotor Uas Pilots For State Departments Of Transportation, Colin H. Dees, Joseph M. Burgett

The Professional Constructor

To fly an unmanned aircraft system (UAS), commonly referred to as a “drone,” the Federal Aviation Administration (FAA) requires pilots to pass a knowledge test. There is no requirement at the state or federal level for drone operators to demonstrate the ability to operate a UAS. The National Institute of Science and Technology (NIST) has created an exam for public and private entities to assess basic UAS flight proficiency. It is the only nationally recognized flight proficiency protocol. NIST does not provide a scoring recommendation and leaves it to the user to determine the minimum criteria to pass. There is …

Innovative Smart Sensing System For Accurate Monitoring Of Uhpc Setting Time, Ted Atera, Khalilullah Taj, Masoud Pasbani, Yen-Fang Su

Distinguished Undergraduate Researcher Program

Ultra-High-Performance Concrete (UHPC) is an advanced concrete material known for its strength and durability. Its superior mechanical properties make it an ideal material for demanding structural applications such as bridges. Accurate setting time measurements are crucial in helping to optimise the performance of UHPC. All conventional methods and standards for measuring the setting time of concrete rely on using expensive specialised equipment, such as the Vicat apparatus, which assesses penetration depth or resistance. However, these methods may not be well-suited for UHPC due to its rapid surface drying while the interior remains fresh. This prevents free needle penetration and leads …

Interpretable Machine Learning For Bridge-Pier Scour Prediction And Flood Resilience, Adil Khan, Dalya Ismael

Engineering Technology Faculty Publications

Bridge-pier scour is a leading cause of flood-induced bridge failure, yet practice still lacks transparent, physics-informed tools that link data-driven prediction with design guidance. This study develops an interpretable, physics-aware machine-learning framework to predict equilibrium scour depth and translate those predictions into actionable strategies for flood-resilient infrastructure. Using the 2014 U.S. Geological Survey Pier-Scour Database (569 laboratory cases), five models: Gradient Boosting, AdaBoost (Tree), XGBoost, Gaussian Process (RBF kernel), and Kernel Ridge (polynomial), were trained and evaluated with K-fold cross-validation. Model performance was evaluated using R², RMSE, and MAE. Gradient Boosting performed best, achieving training and testing R² of 0.99 …

Metagenomic Polymorphic Toxin Effector And Immunity Profiling Predicts Microbiome Development And Disease-Related Dysbiosis, Hunter W. Schroer, Francesco Beghini, Juan Antonio Raygoza Garay, Nicholas A. Christakis, Dustin E. Bosch

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Bacteria use antagonistic interbacterial weapons, such as polymorphic toxin secretion systems (TSS), to compete for niches in the human gut microbiome. We hypothesized that TSS influence gut microbiome development and disease-related dysbiosis. We developed a bioinformatic marker gene approach (PolyProf) to quantify TSS including ~200 effector and immunity genes and applied it to ~15,000 publicly available human metagenomes. PolyProf alpha and beta diversity readily distinguished 12 different human disease states and enabled the construction of highly accurate linear regression classifier machine learning models. Elastic net machine learning models integrating bacterial taxonomy with PolyProf had strong predictive value for 12 disease …

Performance Of Shcc Brick Infill And Nsm Reinforcement Systems For Strengthening Rc Deep Beams With Large Openings, Ahmed Badr El-Din, Mohamed Ghalla, Galal Elsamak, Ayman El-Zohairy

Faculty Publications

The presence of large web openings in reinforced concrete (RC) deep beams often disrupts the natural load-transfer mechanism, leading to severe reductions in shear strength and premature failure. This study introduces a novel hybrid strengthening system incorporating strain-hardening cementitious composite (SHCC) bricks, stainless-steel and galvanized-steel sheets, and near-surface-mounted (NSM) steel reinforcements to restore and enhance the shear performance of RC deep beams with large openings. A comprehensive experimental program was conducted on sixteen beams under concentrated loading to evaluate the influence of different infill and strengthening configurations on load capacity, stiffness, ductility, and energy absorption. The results revealed that the …

Thermal Transformations And Mechanical Properties Of All-D-Metal Mn2fecu Heusler-Type Shape Memory Alloy, Choji J. Daches, Joseph W. Newkirk, Mario Buchely

Materials Science and Engineering Faculty Research & Creative Works

All-d-metal Heusler alloys are emerging functional materials in which magnetic ordering, lattice distortion, and mechanical behavior are strongly coupled through d–d electronic interactions. This study systematically investigates the structural, thermal, magnetic, and mechanical properties of Mn₂FeCu synthesized within a Heusler-type compositional framework. SEM/EDS revealed a dual-phase FCC-based microstructure consisting of Mn–Fe–rich and Mn–Cu–rich domains, while XRD confirmed FCC symmetry with compositional partitioning rather than full L2₁ ordering. Differential scanning calorimetry identified partial melting of the Cu-rich phase near ~ 900 °C. Dilatometry showed a thermoelastic FCC → FCT transformation at ~ 770–780 °C with a recoverable strain of ~ 0.067%. …

The Effects Of Mold Flux Contamination On Oxide Scale Formation And Hydro-Descaling Efficiency During Steel Processing, Tochukwu Princewill Ojiako, Richard Osei, Mario Buchely, Haiming Wen, Simon Lekakh, Ronald O'Malley

Materials Science and Engineering Faculty Research & Creative Works

Oxide scale formation during thin-slab continuous casting has a complex structure, which is influenced by mold flux contamination, that modifies interfacial reactions during solidification, subsequent reheating, and descaling. While individual aspects of the oxidation behavior of carbon steel have been previously examined, the synergetic effects of mold flux contamination during continuous casting and subsequent reheating on scale modification and the efficiency of hydraulic descaling remain inadequately studied. This study quantitatively examines the effect of flux composition on oxide scale evolution, adhesion, and hydraulic removal in low-carbon steel under simulated industrial conditions. Slab samples with as-cast, cleaned, and flux-coated surfaces were …

Seat Belt Data Collection Methods: A Comparison Between States And National Guidelines, Madison R A Richards

Williams Honors College, Honors Research Projects

Thousands of fatalities related to vehicle crashes occur every year. One method to reduce fatalities is to encourage seat belt use compliance. To promote statistics regarding seat belt use, there first must be reliable data on seat belt compliance and this comes from good survey design.

This report is a comparative analysis of seat belt data collection methodologies for Ohio, Michigan, and Indiana, in addition to an evaluation of how each state aligns with standards set by the National Highway Traffic Safety Administration (NHTSA). The framework for this analysis focuses on NHTSA’s five core survey design requirements: selection of observation …

The Impact Of Surveying, Nicholas A. Cosper

Williams Honors College, Honors Research Projects

My project consists of three parts. The first part will be helping the public. To do this I will be helping the Boy Scouts earn their surveying merit badge. This badge is known to be one of the hardest for scouts to obtain. In the next part of my project, I will be running a 3-wire level on the Davey Tree Seed Campus. This project will be extremely useful to them (the rest of this information is confidential). In the final part of my project, I will be conducting a topographical survey for the Cuyahoga Valley National Park for a …

Impact Of Natural Disasters On Construction And Engineering Solutions, Karima Ao Damson

Williams Honors College, Honors Research Projects

This Honors Research Project seeks to research and explain the impact of natural disasters on the construction and reconstruction of infrastructure in countries with the highest risk of natural disasters and compare them to the requirements in the United States in the states most prone to natural disasters. The objectives are to identify the countries most prone to natural disasters, describe the environmental impacts of the natural disasters, describe the impacts on construction and reconstruction requirements, and research whether construction and civil engineering solutions currently applied to the individual countries could be improved or reproduced in other countries exposed to …

Analyzing A Benchtop Model Of Combined Heat Power To An Industrial Scale, Chase Steven Carlton, Ashley Leach, Andrew Martin-Biggs, Tessa Wilker

UNH URC Open (2026 and after)

Analyzing a Benchtop Model of Combined Heat Power to an Industrial Scale

Evaluating High-Strength Steel Welded Connections For Future Aws Welding Standards, Parker Minter

2026 Research Poster Competition

Welding plays a critical role in many civil engineering applications as it is a common method used to connect structural steel components. Because of how widespread the practice is, the American Welding Society (AWS) has developed a set of standardized welding guidelines to ensure consistent quality in structural welds. These standards allow common weld types to be fabricated using pre-approved procedures (e.g. welding materials, temperatures, and positions). Recently, high-strength structural steels have begun to be available domestically. Current AWS standards do not allow for high strength steels (yield strength greater than 80ksi) and need to be evaluated for the inclusion …