Civil and Environmental Engineering Commons^™

Comment On The Draft Environmental Impact Statement For New Operations For Lake Powell And Lake Mead Post-2026, Bryan Williams, Caitlyn Andrus, Brittany Fager, Matthew Fugal, Parker Hansen, Ashley Jones, Shaun Joseph, Ashley Mcallister, Braden Wilding, David Rosenberg

Civil and Environmental Engineering Student Research

We appreciate the Bureau of Reclamation’s extensive effort in preparing the Post-2026 Draft Environmental Impact Statement (Draft EIS) for operational guidelines for Lake Powell, Lake Mead, and the Colorado River Basin. This commentary will address positives, questions, and concerns from the Draft EIS. We also share recommendations for consideration in the Final EIS.

Cultivation Of Arthrospira Platensis (Spirulina) In Food-Based Industrial Wastewater For High-Yield Phycocyanin Extraction, Pavithira Sathinathan

Student Works (2020-2029)

Arthrospira platensis (Spirulina) is a filamentous cyanobacterium valued for its nutritional profile, particularly the pigment–protein phycocyanin, with potent antioxidant and anti-inflammatory properties. Despite its industrial significance, large-scale commercialization remains constrained by high cultivation costs and inefficient extraction methods. This study investigated the use of food-based industrial wastewater as an alternative nutrient medium for Spirulina cultivation, aiming to reduce production costs, enhance phycocyanin yield, and support sustainable wastewater remediation. Three types of food-based wastewater with different nutrient composition (WW1, WW2, WW3) was diluted with Kosaric medium (1:1) and used for Spirulina cultivation. The highest biomass concentration was achieved in WW2 (1.93 …

Feasibility Of Using Recycled Waste Plastic In Concrete Pavements In Nebraska, Amasi Hajahja, Jamilla Teixeira, George Morcous

Nebraska Department of Transportation: Research Reports

Waste plastic (WP) is a growing environmental concern due to its non-biodegradable nature, large-scale production, and harmful impact on natural resources. With nearly 75% of WP in the U.S. ending up in landfills, effective recycling strategies are urgently needed. In parallel, the limited availability of natural aggregates highlights the need for alternative materials in concrete construction. This study investigates the feasibility of using recycled waste plastic (RWP) in concrete mixtures, both as aggregates and fibers for rigid pavement applications in Nebraska. Concrete mixtures were prepared by partially replacing natural fine aggregates with recycled plastic aggregates (RPA) at replacement levels of …

Failure Of Infrastructure Systems: A Multilevel Network Analysis Of Decision-Making And Influential Behavioral Constructs, Tamima Elbashbishy, Radwa Eissa, Islam H. El-Adaway, Jeffrey S. Russell

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High-profile failures of infrastructure systems are often attributed to design flaws. However, these incidents can also stem from a broader set of interconnected decisions made by stakeholders involved in the planning, management, and operation of these systems. While ethical guidelines and professional codes are designed to prevent such failures, cognitive biases may undermine adherence. Previous research efforts, primarily focused on ethical violations using case studies, have overlooked how behavioral ethics constructs and professional conduct could drive these breaches. This paper addresses this knowledge gap by (1) conducting an analysis of three system failure cases at the micro, meso, and macro …

Methodology For Surface Defect Assessment In 3d Concrete Printing Using Computer-Vision And Ultrasonic Testing Considering Structural Build-Up, Seongho Han, Eunjong Ahn, Myoungsu Shin, John S. Popovics, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study quantifies how interlayer time gaps and mixture rheology jointly influence interfacial integrity and mechanical performance in 3D concrete printing (3DCP). Two mixtures incorporating identical binders, but differing limestone fineness (4 and 50 μm) were printed with interlayer delays of 0, 2, and 5 min, corresponding to stacking rates of approximately 9, 0.5, and 0.2 m/h. The finer limestone mixture exhibited higher plastic viscosity (13.2 vs. 11.5 Pa s) and faster structural buildup (58 vs. 38 Pa/min), resulting in accelerated early stiffening. Deposition yield stress derived from buildup measurements remained low for 0–2 min (1400–1500 Pa for the higher-thixotropy …

New Insights Into Dynamic Evolution Of Colloidal Network Structure During Early-Age Hardening Of Cementitious Materials, Hengrui Liu, Kaiyin Zhao, Shipeng Zhang, Hanghua Zhang, Shuangshuang Liu, Lucen Hao, Hongyan Ma, Kamal Khayat, Chi Sun Poon

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The evolution of microstructure in cementitious materials during their transition from fluid to solid state plays a critical role in determining their ultimate mechanical strength and overall performance. This hydration stage primarily involves a dynamic densification process occurring within the colloidal network. However, the field of cement-based materials currently lacks a comprehensive theoretical framework and associated parameters capable of effectively characterizing the specific structural regions within this network. In this study, we propose an Improved Particle Linkage (IPL) theory for describing the strength, types, and quantities of particle linkages within colloidal network. The IPL theory classifies the internal network structure …

Quantitative Comparison Of Different Ultrasound Simulation Approaches For Civil Engineering Applications, Fabian Dethof, Simon Schmid, Jean-Marie Henault, Thomas Schumacher, Sylvia Kessler, Salvador Villalobos

Civil and Environmental Engineering Faculty Publications and Presentations

Interpreting ultrasonic waveforms is often challenging, especially in the presence of tilted boundaries that introduce multiple reflections, mode conversions, and echoes. To analyze such complex signal patterns, wavefield simulations provide a valuable tool. To ensure confidence in the simulation results, the accuracy of the numerical method is crucial. Another consideration when using simulations is their computational expense. Especially in civil engineering applications, large structures need to be investigated, which may not be feasible given the available resources. In this study, different numerical methods and software implementations commonly used for simulations in civil engineering are compared, including the Elastodynamic Finite Integration …

Applying Direct Numerical Simulations To Investigate Wave Forcing Against A Vertical Wall, Hunter Boswell, Frank D. Han, Gaurav Savant, Guirong Yan, Wouter Mostert

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Current engineering standards lack the ability to predict the peak impact forces of breaking waves impinging directly upon coastal structures. In this study solitary waves impacting vertical and tapered walls are investigated. To capture the detailed physics of the wave profile that impacts the wall, two-dimensional direct numerical simulations are applied to model the wave traveling over a simplified bathymetry consisting of an initially uniform depth, followed by a uniform beach ramp and then terminating in a uniform depth inshore region and vertical wall. Such an approach can simulate wave runup on land and then the impact with the vertical …

Mechanistic Framework Of Wood Decomposition In Post-Storm Vegetative Debris Piles Using Continuous Quality Theory, Thomas T. Lee

Master's Theses

Storm events generate significant quantities of vegetative debris composed of wood, branches, twigs, and other organic materials. Efficient post-storm resource recovery and carbon accounting depend on reliable predictions of decomposition within these large, heterogeneous debris piles. While small-scale wood decay is well studied, decomposition dynamics within multi-layer debris piles remain poorly characterized, limiting municipalities' ability to estimate material longevity and resource recovery potential.

To address this gap, this study develops the WOOD_DK (Wood Organic Oxidation and DegraDation Kinetics) model, a preliminary, exploratory one-dimensional multilayer decomposition framework simulating coupled temperature, moisture, oxygen, and carbon dynamics in MATLAB. Microbial decomposition follows Continuous …

A Simulation Framework For Edge Lane Roads And Bicycle Shared Roadways, Nick Sauciur

Master's Theses

Edge Lane Roads, also referred to as Advisory Bike Lanes, are a shared roadway treatment that designates space for cyclists while allowing flexible use of the roadway by motorists. They are commonly applied on lower speed corridors and can be used both where roadway width is limited and where agencies seek to manage vehicle speeds, clarify cyclist positioning, or improve shared roadway operations. The configuration provides visually designated space for cyclists while allowing motorists to encroach into that space when yielding to opposing traffic. Although interest in these facilities is growing in North America, quantitative tools for evaluating their operational …

Dvr Service Evaluation And Fee Sufficiency Study, Mallory Brown, Andrew Martin, Jeeyen Koo, Jennifer Walton

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet’s (KYTC) Department of Vehicle Regulation (DVR) administers numerous fees and taxes. Many administered by the two divisions in DVR — Motor Vehicle Licensing (DMVL) and Motor Carriers (DMC) — have remained unchanged for many years despite salary increases, the adoption of more complex and expensive technologies, and inflation raising administrative costs. This report provides in-depth assessments of 10 fees and taxes (selected by division administrators). Six are administered by DMVL — certificate of title, duplicate title, vehicle title history report, additional registration fee, reflectorized license plate fund, and trailer registrations — and four are managed by …

Data-Driven Non-Precipitation Echo Removal Of Nexrad Radars Based On A Random Forest Classifier Using Polarimetric Observations And Goes-16 Data, Munsung Keem, Bong Chul Seo, Witold F. Krajewski, Sangdan Kim

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Highlights: What are the main findings? A Random Forest-based model using dual-polarimetric radar features achieves >99% accuracy in classifying precipitation and non-precipitation echoes. Multi-scale spatial variability features enhance discrimination between genuine precipitation and spurious echoes. Fusion of GOES-16 infrared satellite data with NEXRAD radar effectively removes non-precipitation echoes with precipitation-like signatures, including wind turbine clutter. A CAPPI scan strategy improves near-radar precipitation detection by recovering valid echoes misclassified at the lowest elevation due to side-lobe interference and limited sampling volume. What are the implications of the main findings? The model's robustness to noise and overfitting, combined with minimal hyperparameter tuning, …

Unhsc Scm Performance Fact Sheets, Unh Stormwater Center

UNH Stormwater Center

No abstract provided.

Evaluation Of Existing Wwtp Using Gps-X Modelling And Simulation Software, Mohamed Hussein Hegazy, Mohamed Ibrahim Sobhy, Mohamed Nouh Meshref, Marwan Ahmed Elghonimy

Civil Engineering

Research on ways to make WasteWater Treatment Plants (WWTPs) work better is still limited. In this study, GPS-X simulation was used to predict how a WWTP behaves under different operating conditions and to suggest ideas for future improvement. GPS-X version 8.5 was applied for dynamic modelling and simulation to check the performance of the Arab Abo Saed Wastewater Treatment Plant in Helwan, Egypt. Two operating cases were studied: one with the highest water flow and the lowest pollutant levels, and another with the lowest water flow and the highest pollutant levels. Real data from two years (2022–2023) was used for …

Creation Of The 2-Way Cross Laminated Timber Subroutine For Computing Dynamic Analysis Parameters, Joseph Freitas

Architectural Engineering

This document will describe the inputs, methodology, and outputs for the CLT 2-way subroutine for cases with and without openings recently added to a proprietary structural analysis software. For the sake of simplicity, most of the discussion will be focused on cases without openings from here on out, as the verification process for a novel method for cases with openings is still in progress. The CLT 2-way module calculates multi-point resistance functions for panels without openings by automating the procedure outlined in an industry-standard structural design manual. The subroutine also finds the appropriate dynamic response factors, kinetic load multipliers, mass, …

Residential Boundary Fence Installation In Oceano, Ca, Ulysses Beas

Construction Management

This Senior Project focuses on the planning and execution of a residential boundary wooden fence for an elderly homeowner located in Oceano, California, alongside a partial front yard renovation that was an appreciation gift from her grandson. Prior to construction, the front yard was divided by a small ornamental iron fence, which provided very little privacy. This fence installation was designed to improve privacy, security and overall safety while working alongside hired concrete laborers. Not only was the goal to improve safety but also the aesthetics of the home. This Project includes a project scope statement, site measurements, fence layout, …

Slo Botanical Garden Lean-To Carport, Saul Gracian, Sergio Gonzalez

Construction Management

This paper documents the planning, design, funding, and construction of a lean-to carport for the San Luis Obispo Botanical Garden, completed as a student-led Construction Management senior project by Saul Gracian and Sergio Gonzalez. The purpose of the project was to provide a functional storage structure for garden equipment while applying construction management principles in a real-world, nonprofit setting. The project methodology included site evaluation, collaborative design development, cost estimating, funding acquisition, regulatory review, and hands-on construction. Design decisions were informed by site constraints, county code requirements, budget limitations, and stakeholder input, resulting in a final 10’ x 12’ structure …

Risk Management Strategies Used By Project Leaders In Construction Projects On The East Coast, Dylan David Decuffa

Construction Management

Construction projects are often defined by their visible outcomes, structures completed on time, within budget, and built to the required standards. Yet beneath these outcomes lies a less visible force that quietly shapes whether success is achieved or compromised. Uncertainty is present in every phase of construction, influencing decisions, performance, and ultimately the trajectory of the project. The ability to recognize and respond to this uncertainty may separate projects that proceed with stability from those that experience delays, escalating costs, and diminished quality. Project managers, superintendents, project engineers, and other related fields play a central role in navigating this uncertainty …

An Analysis Of Injury And Fatality Trends In The U.S. Construction Industry, Ryan Dutt

Construction Management

Construction work is one of the most dangerous industries in the United States, with different trades and work types showing various risk levels for injuries and fatalities. This paper’s objective is to identify the safety trends in construction over the past 10 to 20 years and understand the trades, accident types, and construction sectors with the highest safety risks. All of the data was obtained from the Occupational Safety and Health Administration (OSHA), the Bureau of Labor Statistics (BLS), the National Institute for Occupational Safety and Health (NIOSH), and the National Safety Council (NSC) databases, broken down by trade, accident …

Thousand Hills Pet Resort Ada Compliant Access Ramp And Connecting Deck: Preconstruction Activities, Sonya Nahama Wijoyo

Construction Management

This paper presents the design and preconstruction of an ADA-compliant access ramp and connecting deck system for two mobile homes located at Thousand Hills Pet Resort. The primary objective was to enhance accessibility and safety for residents by providing code-compliant, durable, and functional access to the mobile homes on site. This project is interdisciplinary between construction management and architectural engineering. The project began with a site evaluation to assess existing conditions. Field measurements and site observation guided planning decisions and helped identify potential challenges. Following the site evaluation, the project proceeded into the design phase, where the ramp and deck …

Assessing The Current Experiences With Electrically- Powered Construction Vehicles Within The Heavy Civil Industry, Matthew Joseph Beauchesne

Construction Management

Heavy machinery, such as cranes, trucks, dozers, and more, are a necessity to build dams, bridges, highways, and all the other types of projects within the Heavy Civil Construction industry. Traditionally, such machinery is powered using fossil fuels - gas or diesel - which in turn affects both the efficiency and emissions of these vehicles. This study focuses on the prospects of using alternative energy - namely electricity - to power such vehicles, and these electric variants differ from their fossil fuel using versions. The methodology of this paper involved seeking out construction contractors within the Heavy Civil sector who …

Case Study: The Benefits Implementing Azure 3d Printed Homes Onto Dignitymoves Project In San Luis Obispo, Lucy E. Heimer

Construction Management

California is actively addressing the challenges of housing shortages and climate change. These challenges have shifted the construction industry, steering the market into finding more sustainable means of construction. This case study evaluates the sustainable benefits of modular construction fabricated by Azure Homes. The focused project is a DignityMoves project in San Luis Obispo where modular units are factory built in El Segundo, CA and set on site. DignityMoves is a nonprofit organization that aims to provide housing for unhoused individuals throughout California. Thus far, DignityMoves has opted to use prefabricated modular units as their primary means of construction on …

Impact Of Regional Heat Differences On Construction Productivity: A Comparative Study Of California’S Central Valley And Central Coast, Berthalidia Acosta

Construction Management

Construction productivity is influenced by many environmental conditions, particularly extremely high temperatures. In regions where high temperatures are normal, workers experience increased fatigue, require additional safety controls, and can even lead to scheduling conflicts. This senior project evaluates how heat differences in two parts of California affect productivity by comparing two projects managed by the same general contractor: one located in California’s Central Valley (Sacramento) and one located on the Central Coast (San Luis Obispo). Throughout the study, there will be two data sources seen: weekly labor recap reports focusing on a particular task (Concrete) and semi-structured interviews with industry …

Slo Garden Guy: Applying Construction Management Principles To A Residential Woodworking Business, Carson Smith

Construction Management

This senior project applies construction management principles to evaluate the launch, performance, and future direction of SLO Garden Guy, a small-scale residential woodworking venture operating in San Luis Obispo. The project implemented structured estimating, standardized workflows, financial tracking, and risk analysis to assess real market demand, operational efficiency, and long-term scalability. Over the course of operation, the business completed numerous customer orders and demonstrated consistent seasonal demand patterns, particularly during peak gardening months. Analysis of production capacity, cost structure, and regulatory considerations provided insight into both the strengths and limitations of a niche, product-based service model. While the operation proved …

Analysis Of Construction Trends On California’S Central Coast, Erik G. Asplund

Construction Management

The California Central Coast experiences sustained housing demand and infrastructure pressure, yet it lacks the visible concentration of construction firms found in larger markets. This study examines why construction activity in the region appears limited despite a strong demand. Using a qualitative, interview-based approach, four construction companies who operate across Monterey, San Luis Obispo, Santa Barbara, and Ventura Counties were interviewed to identify recurring themes related to labor, environmental regulation, housing feasibility, technology adoption, and future outlooks. The study concludes that structural constraints rather than lack of opportunity limit the scalability of construction on the Central Coast.

From Concept To Construction: A Carport For The Slo Botanical Garden, Trent A. Denholm

Construction Management

This paper documents the design, budgeting, procurement and construction of a timber framed carport with architectural shingle roofing at the San Luis Obispo Botanical Garden (SLOBG). The Botanical Garden, a nonprofit organization dependent on community support and volunteer labor, identified the need for covered storage and a dedicated charging station for its golf cart, a vehicle central to daily operations across the property. Without permanent shelter, the cart was exposed to the elements year-round, which contributed to equipment wear and reduced operational efficiency. Working simultaneously as project manager and lead builder, Trent coordinated stakeholder relationships, developed a project budget, secured …

Developing And Commercializing Large Language Model Applications For Automated Construction Submittal Review Requirements, Ryan Cracolice

Construction Management

The construction industry faces persistent challenges in document management, quality assurance, and project coordination. Despite advances in project management software, critical workflows such as submittal review, drawing interpretation, and specification compliance remain predominantly manual processes that consume significant project management resources and introduce risk through human error. Point Construction is an entrepreneurial venture that applies artificial intelligence and advanced imaging technologies to automate and enhance construction document intelligence. The platform integrates directly with industry-standard project management systems to provide AI-driven submittal review, automated drawing analysis, intelligent specification cross-referencing, and natural language querying of project documents. This paper details the conception, …

Factors Impacting Wildland-Urban Interface (Wui) Fires: A Systematic Literature Review, Albert Jimenez

Construction Management

Fires in the wildland-urban interface (WUI) pose a significant danger to communities. The WUI refers to the space where development meets vegetation. Significant research has been conducted into wildfire and WUI vulnerability across the world to help combat vulnerability. These include the identification of factors of vulnerability to create indices that quantify vulnerability, and address scope gaps and inconsistencies within literature. However, existing research seems to be fragmented in finding the WUI vulnerability factors and often it focuses on wildfires and not WUI fires. The objective of this systematic literature review is to synthesize wildfire vulnerability factors identified in the …

Drainage And Pedestrian Access Improvements At City Farms Slo, Benjamin Marc Kocher, Jacob Anthony Booker

Construction Management

This senior project focused on planning, designing, and constructing drainage and pedestrian access improvements at City Farms SLO, a nonprofit in San Luis Obispo that promotes sustainable agriculture and youth education. Prior to construction, the site experienced significant stormwater pooling and erosion in a central area of the farm, making daily operations and visitor access difficult during wet weather. The team excavated an 80-foot trench drain with appropriate slopes, installed a 15-foot corrugated HDPE culvert with proper bedding and backfill, built a seven-foot pedestrian bridge over the trench, and created a 17-foot gravel pathway connecting the bridge to an existing …

A Comparison Of Waste Management Practices In Residential And Commercial Construction, Jayce S. Ford

Construction Management

Construction Waste continues to be a major issue within the construction industry, affecting project costs, schedules, and environmental performance. A large portion of construction and demolition materials/ waste ends up in landfills. This is due to poor planning, limited worker training, and inefficient jobsite practices. This research-based senior project examines waste management efficiency on construction jobsites, while comparing and contrasting residential and commercial construction practices. The study evaluates how contractors manage material separation, recycling, reuse, and disposal of common construction waste. These include wood, drywall, concrete, metals, and packaging. A mixed-methods approach is used combining a review of academic and …