Civil and Environmental Engineering Commons^™

Analyzing The Effects Of Rejuvenators In Balanced Mix Design With High Percentages Of Recycled Asphalt Pavement, Amanda Jo Mullins

Boise State University Theses and Dissertations

Interest in sustainable practices have increased in several industries, including civil engineering pavement materials. The incorporation of Recycled Asphalt Pavement (RAP) into new pavement mix design is a popular method of application for sustainable practice and is accompanied by numerous economic and environmental benefits. There is significant interest in using large amounts of this RAP material in pavement design to maximize the benefits, but several problems arise when utilizing “high” amounts of this material (more than 25% RAP replacement) due to aged and oxidized binder that negatively impacts the properties. The use of rejuvenators (RAs) and Balanced Mix Design (BMD) …

Comparing 1d, 2d, And 3d Hydraulic Models In Urban Flooding Applications, Taylor Kesler

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Floods have been a hazard to people since people first started building near rivers. Predicting floods can be very beneficial to save lives and property. Computers have made it possible to solve fluid dynamics equations in a fast and efficient manner. Computer programs have been designed to solve these equations and create digital models of floods.

This study compares three different methods of computer modeling and explores their advantages and disadvantages. One-dimensional models solve fluid equations by setting up a series of cross sections. Two-dimensional models use a grid-like mesh to solve fluid equations from one cell to the next. …

Estimating Seasonal Crop Water Consumption In Irrigated Lands Using Soil Moisture And Reference Evapotranspiration, Oliver Henry Hargreaves

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The increase in population and the megadrought that the American west has been experiencing for the past two decades and for the foreseeable future are the cause of great stress on the region’s water resources. In an effort to mitigate the worst effects of water shortages many public and private agencies have been pursuing ways to reduce water use while maintaining the current status quo of living standards, industrial productivity, and agricultural yield. This project aims to study water use in irrigated lands dedicated to agriculture with the objective of quantifying crop water use, often referred to as evapotranspiration (ET), …

Improved Sustainability And Efficiency Of Partial Depth Concrete Bridge Deck Repair, Israi I. H. Abu Shanab

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Recently, significant advances have been made in the development of rapid setting cementitious materials for partial depth bridge deck repair. The rapid set times of these materials allow for traffic to be re-opened onto the bridge deck in several hours versus days once the material has been placed. While this is a substantial improvement in reducing the traffic closure time, a large amount of time is still spent on the removal of damaged and deteriorated bridge deck and in preparing the concrete cutouts for placement of the rapid set material. Partial deck removal is a much more delicate process than …

Groundwater-Surface Water Interaction To Increase Groundwater Availability, Saeid Masoudiashtiani

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This study develops procedures for using surface water to increase groundwater availability and sustainable yield, and for evaluating impacts on surface water. Increasing sustainable groundwater yield requires reducing the gap between the volumes of discharge from versus recharge to an aquifer. The study presents procedure for water user(s) to help increase groundwater availability. Toward that end, this study simulates and evaluates: a) aquifer storage and recovery (ASR) of water diverted from Red Butte Creek in Salt Lake Valley, Utah for subsequent turf irrigation; b) ASR injection of residential runoff from daily rainfall for subsequent extraction to irrigate turf; and c) …

Laboratory Modelling Of The Various Components Of Backward Erosion Piping Behavior Due To Converging Flow With Different Constricted Outlets, Ibrahim Ahmed Abdelmotelb Ibrahim

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Backward Erosion Piping (BEP) is an internal erosion mechanism which occurs at the down stream of dams or levees. Two conditions needed for this failure to occur: 1) head of water in the upstream of the dam or the levee to drive the seepage forces, and 2) crack in the roof or the blanket layer of the cohesionless material in the downstream of the dam or a levee. Numerous researches were performed in the past in an attempt to predict the critical gradient for BEP to initiate. Some researches are too conservative and other researches are under predicting the critical …

Locating Low Head Dams Using A Deep Learning Model In Arcgis Pro With Aerial Imagery, Caitlin R. Arnold

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Low Head Dams are man-made structures that span the width of a river and allow water to flow over them. Although these structures vary in age and original purpose, some pose a life-threatening danger when recreationalists are entrapped in the reverse current at the toe. Despite these dangerous structures causing many drowning deaths in the USA each year, most low head dams do not have safety regulations and remain unknown to those charged with dam and public safety. Thus, to improve public safety at these structures, the first step is to fully inventory low head dams, so that subsequent efforts …

Top Mat Reinforcement Alternatives For Concrete Pavement Slabs With Embedded Inductive Power Transfer Systems, Thaddeus J. Hansen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Electric Vehicles (EVs) are continually becoming a larger portion of the vehicular fleet on a national and global level. Despite their growth in popularity, several challenges still exist that hinder the practicality and general public’s acceptance of EVs. The limited travel range of EVs, lack of consistent charging stations, and required time to charge EVs are at the forefront of these challenges. The use of Inductive Power Transfer Systems (IPTS) may be part of the solution to the afore mentioned issues.

IPTS embedded in concrete pavement panels allow EVs to charge their batteries while in motion. In order to justify …

Preferences Toward Augmented Reality Technologies For Pedestrian Navigation, Victoria Alejandra Diaz Mejia

Theses and Dissertations

This research investigates the demand for pedestrian navigation supported by augmented reality (AR) via headset and mobile technologies by evaluating factors specific to each technology and the decision makers. Recent advances in digital engineering systems, e.g., digital twins and smart cities, are enabling new services like AR-supported wayfinding for pedestrians. Still, it is unknown whether American pedestrians would use AR, the type devices and feature that add value to their navigation, the demographic profiles more inclined to AR wayfinding, and the sensitivity of such demand to software and hardware cost. As the first investigation addressing the demand for AR pedestrian …

Development Of Design Method For Fiber Reinforced Slab On Ground, Abdullah Albogami

Theses and Dissertations

All the present methods of designing the slab-on-ground (SOG) are based on the flexural slab capacity (FSC) to determine the required thickness by calculating the modulus of rupture (MOR) of the concrete beam, depending on ASTM C78 or AASHTO T 97 specifications. All previous experimental results have confirmed that the MOR is much lower than the FSC and it cannot be used to predict FSC accurately. Hence, using the MOR to predict the FSC would lead to the underestimation of FSC and require more unnecessary thickness. Therefore, this study aims to develop accurate equation for estimating the FSC based on …

Smart Transportation In Small- And Medium-Sized Cities In Central California, Hongwei Dong

Mineta Transportation Institute

The research on smart transportation in the United States has centered on large metropolitan areas. The adoption of smart transportation technologies in small-and medium-sized cities outside of large metropolitan areas is less studied and understood. This study examined the adoption of smart transportation technologies in small-and medium-sized cities in Central California. The analysis was based on the online survey responses from 29 transportation officials and professionals who worked for 18 municipal government departments and six metropolitan planning organizations (MPOs) in Central California as well as in depth semi-structured interviews with seven of them. The study showed that smart transportation in …

Experimental Investigation Of The Self-Healing Potential Of Bacteria For Sustainable Concrete Structures, Pitiporn Asvapathanagul, Simone Galano, Andrea Calabrese, Mehran Rahmani, Maggie Ly, Daniela Flores, Michael Hernandez, Nicholas Banuelos

Mineta Transportation Institute

Although concrete is the most widely used building material in the world, its limited tensile strength makes cracking a common phenomenon in concrete elements. This study investigates the potential of autonomous self-healing as an eco-friendly and lowcost method to increase the durability of concrete. The crack-healing potential of different types of high-alkaline-tolerant bacteria or calcite-precipitation microorganisms is investigated. High-alkaline-tolerant bacteria and calcite-precipitation microorganisms were used to retrofit lab-fractured concrete samples. The samples healed with each of these bacteria groups were cast and tested under compressive load up to failure to measure the compressive strength of the concrete samples. The outcomes …

Preconstruction Support Cost Hours Estimating On Caltrans Pavement Rehabilitation Projects, Nigel Blampied, Tariq Shehab, Elhami Nasr, Laxmi Sindhu Samudrala

Mineta Transportation Institute

Because the construction phase accounts for the majority of project costs for pavement rehabilitation projects, most research on infrastructure project cost estimating focuses on that phase, rather than on the preconstruction phases. Nevertheless, costs incurred prior to construction, referred to in this report as "preconstruction costs" are significant and worthy of consideration (See Section 2.1 of the report for a more detailed and precise definition of preconstruction). In the 20202021 fiscal year, for instance, the California Department of Transportation (Caltrans) spent more than $169 million on preconstruction work for pavement rehabilitation projects. This report presents the results of a study …

Field Application Of A High-Power Density Electromagnetic Energy Harvester To Power Wireless Sensors In Transportation Infrastructures, Anil Agrawal, Mohsen Amjadian, Wai Yan Tun, Hani Nassif, Hongfan Wang

Civil Engineering Faculty Publications

Finding an efficient source of energy has always been a big challenge for humans on Earth. Fossil fuels, such as coal and oil, have traditionally been considered as major sources of energy. These energy sources are not only nonrenewable but are also harmful to our health and environment. A large portion of this energy is consumed by vehicles moving daily in big cities, causing significant pollution of the environment. However, the motion of vehicles through the transportation infrastructures can also be a significant source of kinetic energy, which can be harvested to power transportation system components, such as sensors, street …

Development Of A Unified Personal And Commercial Residential Hurricane Vulnerability Model Including Sensitivity And Uncertainty Studies, Roberto Vicente Silva De Abreu

Theses and Dissertations

As the population and properties in the state of Florida increase, there is an increase in hurricane losses. Hurricane winds and debris can impact the exterior components of a building envelope. The envelope breaches and defects of these components provide a pathway to hurricane wind-driven rain into the building, which causes interior and contents damage. Loss models, such as the Florida Public Hurricane Loss Model (FPHLM), estimate hurricane insured losses for portfolios of buildings. The vulnerability component of the FPHLM has a personal residential module (PR), for single family homes, and a commercial residential module (CR-LR), for apartment buildings. They …

A Step-By-Step Guide To Identify The Most Reliable Inventory Management System For Small Businesses Using Discrete Event Simulation And Pros And Cons Analysis: A Case Study At Camid-Florida Tech, Djalma Batista Oliveira Filho

Theses and Dissertations

According to the Department of Labor Statistics (2022), 20.6% of small businesses fail in their first year of operation, 42.6% fail after five years, and over 62.6% fail by their tenth year. One factor that can affect continued viability is the lack of knowledge and experience among small and medium-sized firms in inventory management. Despite the fact that inventory control is one of these businesses' most ignored management responsibilities, the expense of procuring inventory often accounts for a considerable portion of their budget. Due to poor inventory management or an inability to appropriately supervise their inventory, small firms may have …

Effects Of Process Parameters On The Dimensional Accuracy Of Fused Deposition Modeled Parts, Ethan Eugene Bair

Theses and Dissertations

Fused deposition modelling (FDM) is one of the most common additive manufacturing techniques used with applications ranging from rapid prototyping at a professional scale to simple part creation at a hobbyist scale. FDM printing has very little in terms of information based on how accurate printed parts can be. This issue, which is common amongst many different types of additive manufacturing techniques, is something that has not been studied in FDM printed parts in high volumes. Research based on the effects of process parameters on mechanical properties has been conducted in high proportions. This study focused on FDM machines using …

Upgrading The Performance Of Steel Beams Using Fastened Advanced Composite Materials, Omnia Ragab Abouelhamd

Dissertations

Bonding Fiber-Reinforced Polymers (FRP) is commonly used to enhance the structural performance of existing steel beams; however, the brittle failure at the adhesive risks the effectiveness of the bonded system. Fastening FRP is recently proposed to avoid the brittle failure of the adhesive. Promising outcomes of few studies on fastened FRPsteel system provoked the interest to investigate the effects of various fastening parameters on the performance of fastened FRP-steel beams.

This study investigates, experimentally and numerically, the impact of various fastening parameters on the performance of fastened FRP-steel beams. The proposed method involves fastening carbon-glass hybrid FRP (HFRP) strips to …

Using Metal-Organic Frameworks (Mofs) In Producing Self-Curing Concrete, Lama Fathi Allan

Theses

Curing of concrete is the presence of adequate moisture content in concrete throughout its early stages to produce the desired properties, as it is significant in improving the concrete microstructure and pore structure and hence in developing its performance and durability. However, good curing is not always practical in several cases, such as in hot weather regions and areas of water inadequacy. For that reason, the need to develop self-curing concrete attracted several researchers. The use of self-curing agents minimizes the water evaporation from concrete and consequently increases its water retention capacity compared to conventional concrete. This thesis is concerned …

Removal Of Hexavalent Chromium From Water By Chitosan-Enhanced Ultrafiltration, Putu A. Y. Indiasih, Anindita D. Syaifudin, Nurul Faiqotul Himma, Bambang Ismuyanto

Makara Journal of Technology

Polymer-enhanced ultrafiltration has gained increasing attention as a selective separation process to remove small solutes, such as metal ions, from water or wastewater. Hexavalent chromium Cr(VI) is one of the metal ions in wastewater that has received considerable attention because of its toxicity. Chitosan was used in this study as the polymer to bind Cr(VI) to enhance its removal by ultrafiltration. The effects of chitosan-to-Cr(VI) ratio on Cr(VI) rejection and permeate flux were investigated. In addition, the fouling tendency was evaluated. Results showed that the addition of chitosan with a mass ratio of 12.5 increased the Cr (VI) rejection from …

Identifying The Optimal Range Of Fine Ground Waste Glass As Cement Replacement, Stephanie Taylor

Undergraduate Research Symposium Posters

The viability of finely ground waste glass as cement replacement is linked to the amount of time the concrete is allowed to cure. Testing beyond 91 days was rare, with only one study using an entire year. Replacement levels below 25% provided the best results in compressive strength. The parameters for future testing derived from this literature review will use ASTM C39/C39M-21 to test the compressive strength of specimens with 0%, 10%, 15%, 20% and 25% finely ground glass replacing OPC with measurements taken at 1, 7, 28, 56, 90, 182 and 365 days of curing.

Machine-Learning-Based Model For Hurricane Storm Surge Forecasting In The Lower Laguna Madre, Cesar E. Davila Hernandez, Jungseok Ho, Dong-Chul Kim, Abdoul Oubeidillah

Civil Engineering Faculty Publications

During every Atlantic hurricane season, storms represent a constant risk to Texan coastal communities and other communities along the Atlantic coast of the United States. A storm surge refers to the abnormal rise of sea water level due to hurricanes and storms; traditionally, hurricane storm surge predictions are generated using complex numerical models that require high amounts of computing power to be run, which grow proportionally with the extent of the area covered by the model. In this work, a machine-learning-based storm surge forecasting model for the Lower Laguna Madre is implemented. The model considers gridded forecasted weather data on …

Global Water Level Variability Observed After The Hunga Tonga-Hunga Ha’Apai Volcanic Tsunami Of 2022, Adam Thomas Devlin, David A. Jay, Stefan Talke, Jiayi Pan

Civil and Environmental Engineering Faculty Publications and Presentations

The eruption of the Hunga Tonga-Hunga Ha'apai volcano on 15 January 2022 provided a rare opportunity to understand global tsunami impacts of explosive volcanism and to evaluate future hazards, including dangers from “volcanic meteotsunamis” (VMTs) induced by the atmospheric shock waves that followed the eruption. The propagation of the volcanic and marine tsunamis was analyzed using globally distributed 1 min measurements of air pressure and water level (WL) (from both tide gauges and deep-water buoys). The marine tsunami propagated primarily throughout the Pacific, reaching nearly 2 m at some locations, though most Pacific locations recorded maximums lower than 1 m. …

Service-Learning For Infrastructure Improvements In Herald Square - Accuracy, Gabriela Funes, Tanvir Ahmed, Annie Benson, William A. Loyed

Eagle Showcase: Excellence in Service-Learning (Archived)

Generation of Terrestrial LiDAR model to assist in the design of public infrastructure.

Service-Learning Modeling For Infrastructure Improvements In Herald Square, Shane M. Henry, Hayden A. Holder, Joel Juarez, Teresa M. Macias, Zenan C. Merritt, Luke H. Ward, Aniya A. Williams

Eagle Showcase: Excellence in Service-Learning (Archived)

Use of terrestrial LiDAR scanner in Service-Learning project to assist the design of public infrastructure.

Investigating The Severity And Rate Of Occurrence Of Motorcycle Crashes Across Different Land Uses In Georgia, Robert Edwards

Symposium of Student Scholars

In 2020, motorcycle crashes reached their highest number of fatalities nationally since 1975, when 5,579 motorcyclists were killed. Georgia, in recent years, has seen an increase in the number of fatal multi-vehicle crashes involving motorcycles. This would be indicative of the general trend and nothing more if the number of motorcycle crashes reported outside of urban populations did not increase—despite lockdown measures—by 1.7% in 2020. In this investigation, employing a thorough examination of the Georgia Department of Transportation’s Crash Data (GDOT) compiled from the last ten years and the Fatality Analysis Reporting System (FARS) compiled from the last five years, …

Behavior Analysis Of Cement Concrete With Combination Of Waste Rubber And Glass, Abdulaziz Alebra

Symposium of Student Scholars

Glass and Rubber waste materials are valuable materials to use rather than throw which we have more than enough to use and recycle. Recycled glass and rubber materials can reduce and help major climate issues in our times based on the statistics reducing glass can bring down air pollution by 20% and also reduce water pollution by 50% as well as can reduce the use of landfill space. A laboratory study will be launched, and tests will be conducted following the ASTM standards, ASTM C143 for a concrete slump, and ASTM C31 for making and curing concrete specimens. Samples of …

Behavior Analysis Of Cement Concrete With Combination Of Waste Plastic And Glass, Mohamad Alamayreh

Symposium of Student Scholars

The waste stream in our society contains abundant plastic and glass waste, which can be effectively recycled to reduce the waste volume and save landfill space. Several studies have demonstrated that recycling glass can lower air pollution by 20% and water pollution by 50%, while recycling waste plastic can help reduce greenhouse gas emissions and save energy. To explore the potential use of recycled plastic and glass in concrete mixes, a laboratory investigation was conducted. Different percentages of plastic and glass waste will be tested as fine aggregates in cement concrete mixtures to evaluate their performance in terms of resistivity …

Impact Of Air Pollution Exposure In Latino Communities: An Equity-Based Framework For Environmental Engineering, Finn Vital

Symposium of Student Scholars

Examining Environmental Racism in Latino communities and the use of Environmental Engineering as a Solution

Background: Hispanics make up the second-largest ethnic group after whites, yet these communities live in more polluted environments than their white counterparts and have higher rates of poverty. With low-income neighborhoods come unsafe and often hazardous environmental factors that harm the health of their inhabitants. Environmental engineering, a newer branch that combines civil and chemical engineering ideas, could offer a variety of different solutions to environmental issues relating to air and water pollution. In A Terrible Thing to Waste by Harriet A. Washington, the author …

The Impact Of Albuquerque’S Bus Rapid Transit System On Pedestrian Safety, Martina Mercure

Civil Engineering ETDs

This project will explore the impacts of several traffic safety countermeasures and roadway design changes on pedestrian safety along the Central Avenue corridor of Albuquerque, New Mexico. The motivation behind this research is the communities concern for the increase in pedestrian fatalities in the US and specifically New Mexico. The research will have a specific focus on pedestrian safety, but we will also address traffic safety outcomes for motor vehicle users and bicyclists. The City of Albuquerque has taken note of the traffic safety issues on Central Avenue and has implemented or is in the process of implementing several countermeasures …