Civil and Environmental Engineering Commons^™

Beneath I-280: Excavating A Neighborhood Lost To San José Freeways, Leila Ullmann, Gordon Douglas

Mineta Transportation Institute

Throughout the 1960s and 1970s, thousands of people in San José, California were displaced from their homes as the state used eminent domain to purchase land and uproot neighborhoods for the construction of Interstate freeways. This report presents a multifaceted research and public knowledge effort that uncovers some of the communities buried beneath these freeways, in the area where I-280 and CA-87 meet today near downtown San José. The project builds primarily from previously unprocessed California Department of Transportation (CalTrans) archival documents, which this project studies for the first time. The records are rich in detail about valuation and sale …

Mechanical And Electromagnetic Properties Of Incorporating Graphene Oxide In Cementitious Mixtures, Cherif Khalil

Theses and Dissertations

This multidisciplinary study aimed at investigating the impact of incorporating graphene oxide (GO) on the mechanical properties and electromagnetic (EM) shielding effectiveness of cementitious mixtures, as well as critically examining the mechanism with which GO affects their microstructure properties. Analysis of the literature review showed that there are discrepancies in reporting the impact of GO on the mortar mix. Consequently, this study focuses on exploring the cause for such discrepancies and identifies three main factors which are thoroughly investigated. The factors were the different sonication energies applied to the GO (Shear Mixing, 1.5 kJ/ml, 3 kJ/ml and 6 kJ/ml), the …

Of Towers And Philosophy: How Interdisciplinarity Nurtures And Expands Capacity, Mario Calabretta

NEXUS: The Liberty Journal of Interdisciplinary Studies

No abstract provided.

Laboratory Evaluation Of Warm Mix Additives At Lower Than Traditional Compaction Temperatures, Abdelrahman Mahmoud Waheish Ali

Theses and Dissertations

The study aims to evaluate the impact of warm mix additives (WMA) on the rheological and performance properties of asphalt binders and mixtures. For this purpose, PG 76-28 and PG 58-28 were obtained with one organic (Sasobit Redux) and three chemical WMA (Rediset, Evotherm, and Zycotherm). All WMA-modified asphalt binders were aged at three different aging levels. Laboratory tests such as performance grade (PG), critical temperature differential (ΔTc), asphalt binder cracking device (ABCD), linear amplitude sweep test (LAS), and Fourier transform infrared spectroscopy (FTIR) were performed. In addition to the binder testing plan, this study also evaluated the impact of …

Experimental Investigation On Flexural Behavior And Energy Absorption Of Lightweight Sandwich Panels With Aluminum Honeycomb Core Embedded By Thin-Ply Carbon-Glass Fibers/Epoxy Face Sheets, Reyhanehsadat Kazemian, Nader Fanaie, S. M. Saleh Mousavi-Bafrouyi, Juhyeong Lee

Mechanical and Aerospace Engineering Faculty Publications

Generally, designing lightweight and thin-walled structures with high mechanical performance is one of the challenging issues for mechanical and civil engineering sciences. To this aim, sandwich panels which have been designed and analyzed in present research include aluminum honeycomb core (H) and UD-thin-ply carbon (C)/glass fiber fabric (G) composite facings and investigated the effect of hybridization and stacking sequence on their static and dynamic mechanical properties while keeping thickness constant. Hybrid face sheets panels with three lay-up configurations of [G₂C₂G₂H̅]_s, [GCG₂CGH̅]_s, [CG₄CH̅]_s and non-hybrid configurations …

Research And Comparison Of Pavement Performance Prediction Based On Neural Networks And Fusion Transformer Architecture, Hui Yao, Ke Han, Yanhao Liu, Dawei Wang, Zhanping You

Michigan Tech Publications

The decision-making process for pavement maintenance from a scientific perspective is based on accurate predictions of pavement performance. To improve the rationality of pavement performance indicators, comprehensive consideration of various influencing factors is necessary. To this end, four typical pavement performance indicators (i.e., Rutting Depth, International Roughness Index, Longitudinal Cracking, and Alligator Cracking) were predicted using the Long Term Pavement Performance (LTPP) database. Two types of data, i.e., local input variables and global input variables, were selected, and S-ANN and L-ANN models were constructed using a fully connected neural network. A comparative analysis of the predictive outcomes reveals the superior …

Design And Development Of An Inert Controlled Environmental Chamber For Evaluation Of Contaminant Mass Transfer, Brian Magnuson, Zachary Limaye

The Journal of Purdue Undergraduate Research

No abstract provided.

Use Of Hybrid Fibers And Shrinkage Mitigating Materials In Scc For Repair Applications, Kamran Aghaee, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Self-consolidating concrete (SCC) is used to repair structural elements with congested reinforcement or restricted access to placement and consolidation. In addition to adequate flowability, passing ability, filling capacity, and stability, adequate bonding to the substrate and reinforcing bars, low shrinkage and cracking resistance are required for successful repair. This study employs various shrinkage mitigating materials, including expansive agent (EA), coupled use of EA with shrinkage reducing admixture (SRA), and EA with pre-saturated lightweight sand (LWS) to fulfill these requirements. The effect of these materials on the performance of SCC made with a hybrid synthetic (PP) fiber and a hybrid steel-synthetic …

Improving Long-Term Flexible Pavement Performance In Louisiana: Effect Of Balanced Asphalt Mixture Design Method And Construction Techniques, Shasank Pant

LSU Master's Theses

Achieving long-term durability and sustainability in flexible pavement is a significant concern in highway infrastructure construction. State highway agencies (SHAs) have implemented various enhanced asphalt mixture design methods and construction practices to address this concern. With advancements in improved asphalt mixture design and construction practices, it is imperative to evaluate the long-term field performance of pavements. Therefore, this study assessed the long-term field performance of flexible pavements in Louisiana, considering enhanced asphalt mixture design methods and construction techniques.

The study consisted of two main sections. In the first section, the field performance of two projects was evaluated: asphalt mixture pavement …

Geodatabase And Modeling Code Used For Dynamic Landslide Hazard Maps In Eastern Kentucky, Nathaniel O'Leary, L. Sebastian Bryson

Earth and Environmental Sciences Research Data

We developed spatiotemporal landslide hazard maps (LHMs) using soil, hydrologic, and geomorphic parameters from the subaerial infinite slope factor of safety (FS) equation under unsaturated conditions. Soil properties were extracted from the NRCS WSS, while geomorphic variables were derived from a 1.5 m LiDAR-based DEM and ArcGIS Online. Soil moisture from Hydrus-1D, driven by precipitation and evapotranspiration (ET) data from Irrigation Manager, introduced temporal variability. Validation against known landslide sites showed spatial and temporal FS accuracy despite some false positives. We also developed a landslide susceptibility maps (LSM) after comparing three machine learning algorithms, with bagged trees achieving the highest …

Liquefaction Hazard Analysis Of Northeast Arkansas Using Cone Penetration Test Data, Rupesh Mahat

Student Theses and Dissertations

The presence of seismically active New Madrid Seismic Zone puts Northeast Arkansas at seismic hazard. The deep soft sediments of Northeast Arkansas within the Mississippi Embayment put the region at liquefaction risk. One hundred and thirty-one (131) Cone Penetration Test (CPT) data are used for liquefaction assessments. Liquefaction analysis on 20 m of surficial deposits is analyzed and compared. Sensitivity and parametric study are also conducted. Geographical Information System (GIS) maps based on liquefaction potential indices are generated. Contour maps of liquefaction potentials are developed for Mississippi County. Liquefaction varies spatially in Northeast Arkansas. A full 20 m of soil …

Efficacy Of Rice Husk Ash (Rha) And Hydrated Lime As Stabilizing Agents For Poor Subgrade Soils In Arkansas, Fares Tarhuni

Student Theses and Dissertations

Rice husk is controlled-burned farm waste. Ash is rich in silicate, a pozzolanic material that improves soil. Rice Husk Ash (RHA) and Hydrated lime (HL) are tested as soil stabilizers in Arkansas' poor subgrade soils. This study analyzes two local subgrade soils with different RHA (3, 6, and 9%), HL (1, 3, and 5%), and RHA (3, 4, or 5%) plus 1%HL. Its goal is to discover the ideal percentages of RHA, HL, or a combination treated soils were tested for Atterberg limits, Modified Proctor, pH, CBR, UCS, and Free Swell. In testing, RHA and HL reduced soil plasticity and …

Characterization Of Functionalized Nanoparticle Coatings Subjected To Soiling And Cementation, Fuad Behbudov

Student Theses and Dissertations

This thesis investigates the efficacy of functionalized nanoparticle coatings in reducing soiling and cementation on solar panels. Employing cementation cycles with Arizona Test Dust (ATD) and Arabian American Oil Company (ARAMCO) dust, the study examines the impact of these coatings under simulated environmental conditions. Key analyses include water contact angle (WCA), transmittance, and X-ray Photoelectron Spectroscopy (XPS). Results show that methylated coatings significantly enhance hydrophobicity and maintain higher transmittance, suggesting less frequent cleaning and sustained effectiveness. The study noted a considerable variation in WCA post-cementation, particularly a marked decrease for the lighting sample, signifying a notable chemical alteration on the …

Integrated Project Delivery (Ipd): A Contractual Framework For The Egyptian Construction Industry, Sarah Hussain

Theses and Dissertations

This abstract highlight the significant findings and contributions of the study, which aimed to develop model clauses specifically tailored to the Egyptian construction industry for multi-party construction contracts. The research methodology encompassed several key components. Firstly, a comprehensive literature review was conducted to explore the various construction delivery methods prevalent in Egypt. This review provided a solid foundation for understanding the existing practices and identifying areas for improvement. The study also delved into the concept of Integrated Project Delivery (IPD) and its potential benefits as well as an analysis of the commonly used standard forms of contract and successful case …

Effects Of Electrode Materials And Potential Gradient On Electro-Osmotic Consolidation For Marine Clayey Soils, Haihui Jin, Lei Zhang, Binghui Wang, Chen Fang, Liyan Wang

Department of Civil and Environmental Engineering: Faculty Publications

This study conducted experimental investigations into the effects of electrode material and potential gradient on the effectiveness of electro-osmotic consolidation (EO) in strengthening soft soils. Seven laboratory tests were conducted on high-water-content marine clayey soils through EO. In these experimental tests, four different types of electrodes made of steel, copper, aluminum, and composite carbon fiber (CCF) were employed in four tests each to evaluate the consolidation effectiveness. Additionally, four tests, one was the comparitive study for different eletrode materials, were carried out to determine the optimal gradient for the EO using CCF electrode. Several critical properties of the tested soils …

Impacts Of Farrowing Pen Design, Season, And Sow Parity On Litter Performance And Piglet Mortality, Verônica Madeira Pacheco, Tami M. Brown-Bandl, Gary A. Rohrer, Rafael Vieira De Sousa, Luciane Silva Martello

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Piglet mortality during lactation is a significant concern in swine production, influenced by complex interactions involving sow, piglet, environmental, and management factors. While crushing by the sow may be the ultimate cause of piglet mortality, there are many factors influencing the outcome, including parity, thermal stress, and animal housing systems. New farrowing systems are continuously being developed; however, it is difficult for producers to make decisions without any scientific basis. This study aimed to assess the impact of different farrowing pen layouts on piglet performance, considering parity and season. A total of 546 sows and 9123 piglets were monitored across …

Research On Orthogonal Test Of Mgo-Fiber Cement Soil′S Deformation Modulus, Hu Qizhi, Yu Yang, Ma Qiang, Zhuang Xinshan

Journal of China & Foreign Highway

Appropriate amounts of MgO and fiber can improve the compressive strength of cement soil. In order to further study the mechanical properties of MGO-fiber cement soil, Minitab software was used to design an orthogonal test method, and sensitivity analysis and influence analysis were carried out. The change rules of deformation modulus of MgO content, fiber content, and fiber length were studied at three different levels. The regression equations of MgO content, fiber content, and fiber length with cement soil deformation modulus were obtained by using Matlab software to process the test data. The sample was tested by scanning electron microscope …

Experimental Study On Performance Of Cast Asphalt Mixture Basedon Dry Modification, Wang Ming, Li Bo, Bao Guangzhi, Hu Deyong

Journal of China & Foreign Highway

Cast asphalt mixture is the most widely used material for the pavement of long-span steel bridge decks, and the special asphalt binder cannot be produced and used in small batches. The wet modification process is obviously not suitable for the production of the cast asphalt mixture during the operation and maintenance period. In this paper, according to the requirements of cast asphalt mixture and its binder, combined with the requirements of the dry modification process, the developed direct injection modifier was employed to conduct the mix design of cast asphalt mixture and tests of the fluidity, penetration and increment, low-temperature …

Assessment Framework For Bim-Digital Twin Readiness In The Construction Industry, Aljawharah A. Alnaser, Ali Hassan Ali, Haytham H. Elmousalami, Ahmed Elyamany, Ahmed Gouda Mohamed

Civil Engineering

No abstract provided.

Assessment Framework For Bim-Digital Twin Readiness In The Construction Industry, Ahmed Gouda Mohamed

Civil Engineering

This study introduces a pioneering structural equation modeling (SEM)-based framework to assess BIM-DT adoption readiness in sustainable construction. The research’s approach delves into the intricate correlation between key success factors (KSFs) and sustainable parameters (SPs), fostering BIM-DT deployment. This interdisciplinary perspective provides a holistic understanding of the impact of KSFs on BIM-DT adoption. The research aims to identify KSFs and parameters, prioritize their relative weights for BIM-DT implementation, analyze KSFs and SPs correlations, and offer practical insights into the findings. The results revealed the importance of sustainability considerations in BIM-DT adoption, with cost optimization and resource management playing pivotal roles. …

Untapped Potential Of Scrap Brass Alloy: A New Frontier In The Use Of Brass-Based Photocathodes For Stable And Durable Photoelectrochemical Water Splitting, Rahma Leil, Mohamed Mahrous Abodouh, Nasir Javed, Sneha Sreekumar, Haydee Pacheco, Nada Tarek, Deirdre M. O’Carroll, Nageh K. Allam

Faculty Journal Articles

Photoelectrochemical (PEC) water splitting is a promising way to produce green hydrogen. However, one of the bottlenecks in realizing scalable green hydrogen production systems is the inability to identify and fabricate earth abundant, stable, and durable photocathodes. The main challenges with the reported photocathodes so far are their instability in aqueous solutions and the use of precious unabundant materials. To this end, the use of scrap materials to fabricate highly stable photocathodes would solve the two main challenges. Herein, scrap brass alloys with different zinc contents were used to fabricate photocathodes for photoelectrochemical green hydrogen production. The scrap brass alloy …

Research On An Improved Cotton Cleaner Unit, Muzaffar Djurayev, Sherqul Hakimov, Ilhom Abbazov, Rashid Kaldybaev

Technical science and innovation

This article analyzes the results of changes to the working parts of a cotton cleaning unit from small and large impurities. It is known that the UXK installation uses continuous cleaning technology, that is, the cotton entering the purifier is cleaned in all its cleaning sections and then transferred to another process. In these sections, pieces of cotton wool from the separated waste are regenerated in a separate drum. Existing purifier suppliers use a manually operated mechanical system to monitor its performance. These factors do not make it possible to control the cleaning process when the quality indicators of cotton …

Performance Of Finned Pile Under Torsional Load In Sand, Aalaa Khater, Ahmad Nasr Prof, Waseim Azzam Prof

Journal of Engineering Research

The pile foundations can experience torsional loads from earthquakes, wind, waves, offshore wind turbines, electrical transmission towers, and ship collisions in the maritime environment. Additionally, the axial load from the supporting superstructures can also cause torsional loads. This paper presents a new approach to pile modification called the finned pile. To enhance the torsional capacity of a single pile in the sand (where sand was used in a state of medium density Dr=50%), with or without fins, a number of experimental tests were conducted to investigate the effects of torsional loads (T), these studies involved varying the length, width, shape, …

Pestel And 3r Waste Management Model For Construction Companies Operating In Central Tanta: A Comprehensive Construction And Demolition Waste Management Model, Moaaz Ali Bastaweesy, Mahmoud Ahmed Zaki, Marwa Ahmed Kamer Eldawla

Journal of Engineering Research

Due to a recent economic boom, Tanta's construction sector has seen fast expansion, which has resulted in high construction and demolition waste (C&DW) creation and waste management operations that lag below international best practices. The current study uses PESTEL analysis, a thorough environmental screening method, to first identify and evaluate significant external and internal elements that may have an impact on C&DW management in a top Central Egyptian construction business. Then, this firm is the topic of a case study that applies the 3R (reduce-reuse- recycle) principles. The offered context-specific current international practices, the described current firm practices, and the …

Modeling Of Equilibrium Shoreline Of Headland Bay Beaches, Mohamed Ahmed Elmarakby, Ahmed Elshinnawy, Bakenaz A. Zeidan

Journal of Engineering Research

Engineering tools for predicting a long-term reaction of beaches include equilibrium beach formulations. They are used to assess how human interference (protection works, breakwaters, ports etc.) has affected the shoreline reaction since they Specify the final orientation of a beach on a time scale of years. One of the equations for determining the Static Equilibrium Planform (SEP) of Headland Bay Beaches (HBBs) that can be found in the literature is the Parabolic Bay Shape Equation (PBSE). The placement of the down-coast control point (P_o), which is the down drift limit from which the PBSE is applied, has a …

Ground Settlements Due To Quad Water Tunnel Construction, Marawan M. Shahien M. Shahein, Ehab Ahmed Khalil E.Khalil, Ahmed F. Abd El Kader A. Abd El Kader, Mahmoud Abdulnasser Hodeab M.A.Nasser

Journal of Engineering Research

Construction of a tunnel under an existing one poses significant geotechnical challenges due to the potential surface and subsurface settlements caused by the new tunnel construction and its impact on the existing tunnel, adjacent buildings, and facilities. The complexity intensifies when multiple adjacent tunnels need to be constructed, such as twin, triplet, quad, or more, as the construction of each tunnel affects the others. This interaction depends on various factors, including the horizontal distance between each tunnel (pillar width), the tunnel's depth and vertical position relative to the existing tunnel (pillar depth), and their influence on surface and subsurface settlement …

Modeling Of Nearshore Wave Transformations Behind Submerged Breakwaters, Mona Mahmoud Abdelay, Ibrahim Mohamed Rashwan, Ahmed Shalby, Hewida Mohamed Omara

Journal of Engineering Research

Breakwaters can generally be divided into three categories based on where the sea level is: submerged breakwater, emerged breakwater, and lower limit breakwater. Nearshore barriers with an underwater structure called submerged breakwaters are used to dissipate the force of wave strikes and safeguard the shoreline. The wave transmission coefficient value can be used to assess submerged breakwaters' contribution to the wave energy decrease. In the past mathematical and physical models were used to understand how the submerged breakwater affects incoming wave energy, hydrodynamic processes, and morphological changes. In the present study, the MIKE21 SW software as the numerical model was …

Exemplary Studies On The Torsional Response Of Single Pile In Contaminated Sand, Ahmed Nasr, Waseim Azzam, Nada Ramadan

Journal of Engineering Research

Deep foundations, including piles, are employed in types of coastal soil because the soil in such regions may be subjected to several variables that alter the engineering features of the soil, like oil contamination. Together with the loads caused by supported superstructures, the pile foundations may also be susceptible to torsional loads from eccentric, horizontal loads brought on by winds, earthquakes, ship accidents, and waves. Tests have been conducted in this laboratory investigation to examine the behavior of piles under torsional load (T) in polluted sandy soil. Also, tests investigated how the Lp/Dp ratio affected the piles' bearing capacity. Details …

The Ecological Responses To Hydroperiod Of Wetland Plant Species Determined By Manipulated Soil Surface Elevation (Marsh Organs), Brandon Wolff

LSU Master's Theses

As sea level rise, subsidence, and abandonment of natural deltaic processes due to a highly engineered Mississippi River continue to threaten Louisiana’s coastal wetlands, the need for a system-wide understanding of natural wetland land-building and preservation processes has never been greater. A key component of any wetland is the ever-changing water environment that periodically floods and dries the marsh platforms. The flooding depth, duration, and frequency, known as the hydroperiod, along with salinity and soil fertility are key determining factors of vegetation and marsh types at a particular location. Different types of vegetation will have different growth characteristics such as …

Suitability Of The Height Above Nearest Drainage (Hand) Model For Flood Inundation Mapping In Data-Scarce Regions: A Comparative Analysis With Hydrodynamic Models, Navin Tony Thalakkottukara, Jobin Thomas, Melanie Watkins, Benjamin C. Holland, Thomas Oommen, Himanshu Grover

Michigan Tech Publications

Unprecedented floods from extreme rainfall events worldwide emphasize the need for flood inundation mapping for floodplain management and risk reduction. Access to flood inundation maps and risk evaluation tools remains challenging in most parts of the world, particularly in rural regions, leading to decreased flood resilience. The use of hydraulic and hydrodynamic models in rural areas has been hindered by excessive data and computational requirements. In this study, we mapped the flood inundation in Huron Creek watershed, Michigan, USA for an extreme rainfall event (1000-year return period) that occurred in 2018 (Father’s Day Flood) using the Height Above Nearest Drainage …