Civil and Environmental Engineering Commons^™

Development Of A Combined Quantity And Quality Model For Optimal Unsteady Groundwater Management, Richard C. Peralta, J. Solaimanian, C. L. Griffis, S. A. Prathapar

Civil and Environmental Engineering Faculty Publications

Presented is a procedure for incorporating solute transport as linear constraints within computer models for optimizing regional groundwater extraction strategies. The MODCON modelling procedure uses linear goal programming, embedded linearized equations for flow and solute transport and a MOC simulation model. Assumed is 20 flow and solute transport and a dispersed conservative contaminant. The MODCON procedure develops steady groundwater extraction strategies that will satisfy future groundwater quality constraints while simultaneously causing future piezometric heads to be as close to current heads as possible. The procedure is applied to a 160 square mile area in southeastern Arkansas.

Design Of Automotive Structural Components Using High Strength Sheet Steels Structural Behavior Of Members Consisting Of Flat And Curved Elements, M. Brad Parks, Wei-Wen Yu

CCFSS Library (1939 - present)

Local buckling of stiffened and unstiffened curved elements has been investigated both experimentally and analytically. Stiffened curved elements are supported along both longitudinal edges while unstiffened curved elements are supported along one longitudinal edge with the other longitudinal edge free. A series of stub column, beam, and shear tests have been performed for sections containing curved elements. The tested specimens were formed from sheet steels with yield strengths ranging from 27 to 88 ksi. The radius-to-thickness, R/t, values of the curved elements varied from 12 to 438 whereas the arc length-to-thickness, b/t, ratios ranged from 23 to 218. As a …

Irish H & V News

Building Services Engineering

No abstract provided.

The Degradation Of Trace Pollutants In Wastewater, Christine M. Cheng

Theses

The effect of different treatments on the degradation of chlorinated organic pollutants in wastewater has been studied. The model compound investigated was para-chlorophenol. The different treatments used were ozone, UV irradiation, ultrasound, air flow and pure oxygen.

It is concluded that ozone has the greatest effect, ozone-UV irradiation follows closely behind, and UV irradiation has much less of an effect in degrading the p-chlorophenol.

P-chlorophenol was found to have an immeasureably slow degradation rate when treated with air even at an elevated temperature of 55°C.

The oxygen, at room temperature, showed a degradation of p-chlorophenol which, although small, was much …

Construction Labor And Productivity : Productivity Improvements, Stavros C. Nicolaou

Theses

Construction productivity has been on the decline in the last decade. Although an important factor in the nation's economy, productivity of construction labor has been given little attention over the years. A review of the literature dealing with construction was performed that revealed the importance of the declining productivity as well as the confusion among construction managers and labor leaders as to what productivity is all about and how it can be improved. It has been found also, that construction labor motivation, which is the most important factor in improving productivity, is almost nonexist. Very few construction companies employ any …

A Study Of Failure Modes In Rock Resulting From Pile Penetration, Girish Mehta

Theses

The purpose of this thesis was to physically examine the failure mode of a rock mass as a result of pile penetration. In addition, the static bearing capacity of piles bearing in rock was investigated. This was accomplished in the laboratory by performing model tests using a dynamic pile driving device.

Tests were performed using 1 inch nominal diameter model pipe piles and H-piles. Piles were driven into a simulated rock mass consisting of clay-masonry bricks. Following pile driving, the rock mass was carefully dissected and observations of the failure mode were made.

A new technique was developed to preserve …

Non-Linear Finite Element Of Analysis Of Reinforced Concrete Members, Chellathurai Jeyamohan

Theses

A finite element analysis of reinforced concrete members is used to study the initiation and propagation of cracks and the behavior at the interface of concrete and steel. The increase of concrete strength due to the biaxial compression and the shear capacity of the cracked elements are also considered in the analysis.

The results of the present analysis are compared with some available experimental data in beam tests. It has been found that the present analysis is capable of calculating the stress ( or moment ) and strain ( or deformation ) from zero load upto the ultimate load.

Analysis Of Nitrated Polycyclic Hydrocarbons, Pah-Quinones And Related Compounds In Ambient Air, Yalan Wang

Theses

Studies were conducted to characterized airborne particulate extractable organic matter (EOM) with respect to chemical composition and biological activity. It has been well established that the nitrated polycyclic hydrocarbons (nitroPAH) are environmental contaminants. To identify nitro-PAH in ambient air sample, a technique was developed involving introduction of a reducer column into an reversephase high performance liquid chromatography (HPLC) system. Strong fluorescence signals were achieved from nitro-PAH and detected together with u.v. signals for the qualitative and quantitative analysis of nitro-PAH. 2-Nitrotriptycene was synthesized according to published procedures and used as an internal standard. By use of the above technique, 9nitroanthracene, …

Feasibility Of Using Canine Olfaction As A Means Of Detecting Hazardous Substances, Stuart David Messur

Theses

Two specific applications for using canine olfaction as a means of detecting hazardous substances have been recognized: detection of residual contamination on hazardous waste cleanup equipment (DECON), and detection of leaking underground gasoline tanks (LUST).

With the DECON project, the dog's ability to detect low emissions of some common hazardous compounds was tested. As a safe and effective training tool for presenting hazardous compounds to the dog, permeation tubes filled with m-xylene or 1,1,1-trichloroethane were constructed and calibrated. Hidden tubes emitting as low as 0.5 µg/min were consistently detected by the dogs. During olfactory field tests, "hot spots" of m-xylene …

Construction Loan Proposal : A Model For Contractors, Saeed Ahmed

Theses

This thesis is an attempt to outline a construction loan proposal. The purpose is to provide an average contractor with an insight which could help him toward a preparation of a better proposal and better understanding of the subject matter itself.

Feasibility Of State-Of-The-Art Project Planning Techniques In Pakistan, Ahmed Mansoor Ansari

Theses

The objective of this work is two-fold:

1. Technological transfer of the best suitable state of the art techniques for implementation in the construction industry of Pakistan.

2. A vehicle intended for American readers to gain insight of the present methods of working in Pakistan.

In harmony to the first of the forestated ambitions this work covers subjects widely ranging from introducing the concept of proven scheduling techniques as CPM, PERT to the application of these techniques via advanced computer technology.

Frequently, American professionals and consulting firms are invited to participate to administer or design specialist construction projects in Pakistan. …

Computer-Aided Storm Sewer Design For Apple Macintosh, Andrea Cancalosi

Theses

The design of storm sewer systems because of its repetitive calculations lends itself to the use of computers for time-efficient solutions. The program developed designs storm sewer systems. Runoff is calculated using the Rational method. The rational method yields satisfactory results for relatively small areas and is widely used for stormwater calculations in urban areas.

Before, during or after the calculation process, the input data can be edited using a user-friendly editor incorporated into the program. Input data can be viewed by display on the screen or printed at any time while editing.

From the given input data, the program …

Groundwater Contamination Studies At A Sanitary Landfill In New Jersey, Yau-Chorng Chien

Theses

Edgeboro Landfill, a site used for the disposal of municipal and industrial refuse, is one of the largest landfills in New Jersey. The landfill has been in operation since 1954, serving the solid waste disposal needs of local townships and a major portion of Middlessex and the surrounding counties. The landfill was not equipped with a liner and a leachate collection system at the time of start up. The leachate collection line around the landfill, on-site leachate treatment by three stabilization ponds and subsurface cut-off wall were provided to minimize the discharge of leachate into adjacent waters in 1979. Groundwater …

Thermal Desorption Of Hazardous And Toxic Organic Compounds From Soil Matrices, Michael L. Hornsby

Theses

The purpose of this initial laboratory scale research project was to study and demonstrate the feasibility in removal of selected toxic organic compounds from soil by thermal desorption and gas purge. Applying heat and a flow of inert gas to the soil increases the volatilization and effects removal of organic compounds from soil. The work was done in two parts: First, organic solvents were injected into columns containing real and simulated soil matrices. The columns were heated to one of the four temperatures and purged with a flow of nitrogen carrier gas. The organic vapors were deposited as a plug …

Failure Surface Of A Square And Rectangular Reinforced Concrete Members [Sic] Under Combined Biaxial Bending And Tension, Ravindra M. Khanapure

Theses

This thesis describes the development and use of three dimensional strength interaction diagrams of reinforced concrete sections for different loading conditions. It also gives a comprehensive overview of modes of failure surfaces and provides design aids for members subjected to biaxial bending and axial tension. This is the phenomena which is rather overlooked analytically and graphical predictions are made. The computer program provides a special tool for the analysis and fast interation of combination of loadings and moments.

Bond Behavior Of Reinforced Concrete Under Impact Loading, Abu Rayhan Md Muniruzzaman

Theses

This thesis covers experimental investigations of bond behavior of reinforced concrete specimen under impact loading. A computer assisted data acquisition system was selected for data acquisition and control. This entire electronic system involved mainly a multichannel digital oscilloscope and an IBM-AT micro computer. All specimens were tested by a modified instrumented Charpy tester assisted by the electronic system.

15 test specimen were prepared in order to perform the experimental investigations. Each 3x3x16 inch specimen was reinforced with a single deformed bar mainly 3/4" and 1/2" diameter and three catagories of concrete mainly plain, 1%, and 2% (by volume) steel fiber …

Kinetic Study Of Degradation Of Refractory Organic Chemicals : 2, 4-Dichlorophenol, 2, 4-D And Pyridine; Using Ozone/Hydrogen Peroxide/Uv Radiation, Milind K. Pradhan

Theses

In this study Ozone/Hydrogen Peroxide/UV radiation is used to destroy refractory organic chemicals in aqueous solutions. 2,4-dichlorophenol, 2,4-D and Pyridine are the three chemicals used. Hydrogen Peroxide in combination with UV light proved to be most effective in destroying the parent chemical completely. Ozone and UV system was the next most effective system. UV alone was the least effective.

Kinetic study of the Hydrogen Peroxide and UV system was done using a Chemkin program. The results predicted by the Chemkin program matched closely with the experimental results. More work is currently being done using the Chemkin program to study other …

Flexural Behavior Of Portland Cement Based Composites Subjected To High Strain Rates, Edward Roland

Theses

This investigation studied the modulus of rupture and energy of rupture of mortar, concrete, and steel fiber reinforced mortar at various rates of flexural straining. The strengths of the composites were varied by changing the water cement ratios. Single point flexural loading tests were conducted on 4" x 4" x 20" specimens using a weight dropped from a height of 30" to produce the dynamic loading. Strain rates were varied between 0.1 and 1.9 per second. The inertial effects of acceleration of the specimen were taken into account.

These tests produced data that demonstrated slightly greater ratios of dynamic to …

Sorption Characteristics And Their Effects On Geotechnical Properties Of Illite, Gnanmoorthy Selvakumar

Theses

An experimental investigation of the sorption characteristics of phenol, chlorophenol and chlorobenzene on to illite and of the effect of sorption on the geotechnical properties of illite was performed. Various adsorption isotherms have been considered for the equilibrium adsorption study data. It was found that the Freundlich adsorption isotherm closely fits the experimental results. In addition, the results of desorption study indicated that the sorption process for these systems is not completely reversible.

The index properties of illite were found to be influenced by the sorption of contaminants, i.e., the Atterberg limits of illite increased in accordance with increases in …

Novel High Resolution Columns For Gas Chromatography, Douglas Kenneth Stout

Theses

A study was conducted to determine if BN would be a reliable solid phase or support for open tubular capillary columns and to develop a technique for the deposition of BN on the column's inner walls. The theoretical plate results for constructed precoated BN columns demonstrated that BN can be employed as solid stationary phase, but evinces low separation characteristics due to the nature of the drawing process. The development of a simple BN precoating process was tested on various diameter capillary columns and found to provide an excellent support for highly polar liquid stationary phases. Capillary columns with a …

Benzene Losses From Aqueous Solutions During Geotechnical Laboratory Testing, Konstadinos Vogiatzis

Theses

This study addressed the problem of using volatile organics in geotechnical laboratory tests. Previous experiments with volatile organics such as benzene and trichloroethylene with soils had shown significant concentration losses during the tests. The purpose of the study was to identify the sources of loss and to quantify the magnitude of loss.

Vapor - liquid equilibrium was used to predict theoretical evaporation losses of benzene from aqueous solutions. Calculations were made for both an infinite volume of air and for a finite volume. Experiments were then performed to verify the theoretical predictions.

Other losses considered were those during solution preparation, …

An Application Of The Finite Element Method And Two Equation (K And E) Turbulence Model To Two And Three Dimensional Fluid Flow Problems Governed By The Navier-Stokes Equations, John I. Finnie

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Finite Element computer codes in two and three dimensions were written that solve both laminar and turbulent flow. These codes use the two equation (k and E) turbulence model to evaluate turbulent viscosity. They were tested with 29 different flow problems. The largest two dimensional turbulent problem solved is flow under a sluice gate. A three dimensional vortex flow problem was attempted but was not feasible due to the size of the available computer. The Harwell sparse matrix subroutines of the United Kingdom Atomic Energy Authority were used to solve the set of simultaneous equations. The performance of these subroutines …

Performance And Design Of Labyrinth Spillway, Nosratollah Amanian

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In recent years, the general interest in the safety of dams and reservoirs has grown appreciably. This research describes the application and design of labyrinth weirs to improve the performance of existing reservoirs and also to be used for the construction of new dams. The parameters that can affect the performance of labyrinth weirs are discussed. Tests were conducted on normal linear weirs with four different crest shapes to determine the rate of change of discharge coefficient when each type of weir is used. It is found that weirs with rounded-crest shape can pass more flow than other types of …

Evaluation And Application Of Roadway Marking Materials, Kenneth R. Agent, Jerry G. Pigman

Kentucky Transportation Center Research Report

Three different areas of roadway delineation were included in this study. These areas were:

1. Lane delineation materials,
2. crosswalk delineation materials, and
3. snowplowable markers.

Evaluation of lane delineation materials revealed that expanded use was warranted for polyester paint and extruded thermoplastic. The alkyd-resin extruded thermoplastic material was determined to be the most cost-effective material for crosswalk and stop bar installations. Durability and reflectivity results show that Stimsonite 96 markers have performed effectively as snowplowable markers while the recessed markers have performed effectively except on certain interstate locations.

Evaluation Of Construction-Zone Pavement Marking Materials, Kenneth R. Agent, Jerry G. Pigman

Kentucky Transportation Center Research Report

The objectives of this study were to evaluate available foil-back and removable tapes as well as construction-zone raised pavement markers and to recommend materials that should be included on approved lists for use by the Kentucky Department of Highways. Tapes and markers were placed on transverse test sections and the reflectivity, durability, and appearance were observed.

Tapes to be included on the approved lists for foil-back and removable tapes were recommended. Tapes manufactured by 3M, Flex-O-Lite, Cataphote, and Swarolite were included on the list of acceptable foil-back tapes. Recommended removable tapes were the 3M and Cataphote removable tapes. Stimsonite 66 …

Evaluation Of Drainage On Nicholasville Bypass, David L. Allen

Kentucky Transportation Center Research Report

Construction of the Nicholasville Bypass (US 27) was completed in 1986. At the north end of the bypass is a raised, paved traffic median (Figures 1 and 2). The median was constructed with a lip curb and gutter. The roadway at that location is in a superelevated section. A raised, paved traffic median also is located at the southern end of the bypass, Figures 3 through 5 are photographs of that median. The median is located on a tangent section therefore, the roadway has a normal crown. The section of roadway at the southern end is located on a slight …

Finite Element Analysis Of Water Flow In Variably Saturated Soils, Jagath J. Kaluarachchi, J. C. Parker

Civil and Environmental Engineering Faculty Publications

A two-dimensional Galerkin finite element model for water flow in variably saturated soil is presented. A fourth-order Runge-Kutta time integration method is employed which allows use of time steps at least 2 times greater than for a traditional finite difference approximation of time derivatives. For short total simulation times computer execution costs for the Runge-Kutta method are greater than for the finite difference approximation due to the start up cost of the Runge-Kutta method, but for longer simulation times the Runge-Kutta method requires considerably less computational effort even when automatic time-step adjustment is used with the finite difference procedure. A …

Irish H & V News

Building Services Engineering

No abstract provided.

Appendix A: Index Of Participants [1987], Kentucky Transportation Center

Kentucky's Annual Forum on Transportation

No abstract provided.

Appendix B: Traffic Management Work Session, Kentucky Transportation Center

Kentucky's Annual Forum on Transportation

No abstract provided.