Civil and Environmental Engineering Commons^™

Land Surface Temperature And Landuse/ Land Cover Change Variability Using Remotely Sensed Data For Sub-Urban Settlements In Osun State, Nigeria, Saeed K. Ojolowo, Abiodun A. Audu, Charles O. Olatubara, Olusiyi Ipingbemi, Olaitan O. Odunola, Olaide J. Omirin, Oluwasinaayomi F. Kasim

CSID Journal of Infrastructure Development

Land surface temperature (LST) is an indispensable factor in studying urban climate. Ground-based measurements have been employed to quantify LST and Land Use/Land Cover Change (LULC). However, due to advancements in space technology and extensive spatial coverage, remote sensing techniques are increasingly being used to measure the intensity of LST and LULC dynamics, owing to the availability of enhanced satellite-based thermal observations of the Earth. The climatic conditions over a medium-sized city could be improved by understanding the interplay of LST and LULC. In this study, we estimated LST based on Landsat bands 4 and 5 for 1990 and 2000, …

Liveable Communities: A Case Study Of Availability, Proximity, And The Quality Of Critical Infrastructure In Colombo, Srilanka, Maheshi Tennakoon, Udayangani Kulatunga

CSID Journal of Infrastructure Development

The concept of livable communities has become increasingly significant in regional planning, aiming to improve the quality of life for residents. Despite continued investment in critical infrastructure in developing countries, the enhancement of livability has not kept pace with infrastructure development. This study investigates the impact of crucial infrastructure on community livability, utilizing a holistic single case study approach with Colombo as the case study. The relationship between critical infrastructure development and urban livability serves as the unit of analysis. Data were collected through semi-structured interviews with ten subject matter experts and analyzed using manual content analysis. The research finds …

Socio-Economic Effects Of Orisumbare Sawmilling Industries On The Residents Of Ikire, Irewole Local Government Area Osun-State, Nigeria, Umar Usman Jimoh, D R. Ogungbemi

CSID Journal of Infrastructure Development

The study examined the socio-economic effects of the Orisumbare sawmill industry on the residents of Ikire, Irewole local government area of Osun State. The objectives of the study include, examination of the socio-economic characteristics of the respondents, the positive effects of industry on the residents, the negative impacts of industry on the residents, and the perceived environmental-induced diseases caused by industrial activities. A case study research design was adopted, while both primary and secondary data were utilised. A multistage sampling technique was used, in which a buffer zone of 900m radius was made to delineate the zone of industries’ influence. …

Analysis Of The Effects Of Service Delivery On The Wellbeing Of Internally Displaced Persons (Idps) In Federal Capital Territory (Fct), Abuja, Olusegun O. Idowu, Valda Martins, Ndako B. Santali, Jonathan U. Adama, Adekunle S. Adeogun, Gideon Danlami

CSID Journal of Infrastructure Development

The provision of services, encompassing substandard medical facilities, inadequate housing conditions, limited access to electricity, insufficient recreational amenities, and the absence of potable water supply, has emerged as a significant impediment confronting Internally Displaced Persons (IDPs) both domestically and globally. The present investigation sought to evaluate the impact of service delivery on the welfare of IDPs residing in the Federal Capital Territory (FCT), Abuja. The objectives of this inquiry were to assess the socioeconomic attributes of the IDPs, scrutinize the types and efficacy of service delivery within the IDP camps, and appraise the consequences of service delivery on the well-being …

Utilizing Hybrid Machine Learning Techniques And Gridded Precipitation Data For Advanced Discharge Simulation In Under-Monitored River Basins, Reza Morovati, Ozgur Kisi

Civil and Environmental Engineering Faculty Publications

This study addresses the challenge of utilizing incomplete long-term discharge data when using gridded precipitation datasets and data-driven modeling in Iran's Karkheh basin. The Multilayer Perceptron Neural Network (MLPNN), a rainfall-runoff (R-R) model, was applied, leveraging precipitation data from the Asian Precipitation—Highly Resolved Observational Data Integration Toward Evaluation (APHRODITE), Global Precipitation Climatology Center (GPCC), and Climatic Research Unit (CRU). The MLPNN was trained using the Levenberg–Marquardt algorithm and optimized with the Non-dominated Sorting Genetic Algorithm-II (NSGA-II). Input data were pre-processed through principal component analysis (PCA) and singular value decomposition (SVD). This study explored two scenarios: Scenario 1 (S1) used in …

Electrochemical Phosphorus Recovery From The Anaerobically Digested Sludge: Mechanism, Performance, Application, And Solids Disposal, Zixuan Wang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Phosphorus (P) is life’s bottleneck element and an essential nutrient for food production. However, phosphate rock is a non-renewable resource and its geological distribution is highly uneven, making P recovery a crucial step for a circular economy. Approximately 55% of mined phosphorus ends up in centralized wastewater treatment plants (WWTPs), where up to 90% is captured in the sludge. This sludge, treated in anaerobic digesters to produce anaerobically digested sludge (ADS), emerges as a viable secondary source for phosphorus recovery. Recovering phosphorus from ADS typically involves leaching and separation. Leaching mobilizes phosphates from sludge solid phase into a liquid phase, …

Use Of Mathematical Skills For Technical Condition Assessment Of Power Autotransformers, Dilafruz Rustamjon Qizi Abdullabekova, Nurali Berdiyorovich Pirmatov

Technical science and innovation

In this paper, we review innovative approaches to assess the technical condition of autotransformers using mathematical methods. The main purpose of these methods is to increase the efficiency of diagnostics and prevent possible failures in power systems. The developed mathematical expression is based on complex data analysis, application of statistical methods and machine learning technologies. This makes it possible to achieve more accurate and earlier detection of potential problems. As a result of these innovative approaches, the possibilities for early detection and prevention of faults are significantly increased. This is important for ensuring the smooth operation of power systems and …

Quantitative Assessment And Characterization Of Tool Wear Phenomena In Advanced Manufacturing Processes, Oybek Valijonovich Tuyboyov

Technical science and innovation

This paper explores the quantitative assessment and characterization of tool wear phenomena in advanced manufacturing processes, employing a multifaceted approach encompassing traditional measurements, image processing, machine learning, and predictive modeling. The study emphasizes the intricate dynamics of tool wear and its direct impact on cutting tool performance, addressing challenges in real-time monitoring and optimization of machining operations. Traditional methods like VBmax measurement are juxtaposed with advanced techniques such as the improved conditional generative adversarial net with a high-quality optimization algorithm (CGAN-HQOA), efficient channel attention destruction and construction learning (ECADCL), and shape descriptors based on contour, moments, orientations, and texture. Artificial …

Implementation Of A Realistic Artificial Data Generator For Crash Data Generation, Lauren Hoover, Md. Istiak Jahan, Tanmoy Bhowmik, Sudipta Dey Tirtha, Karthik C. Konduri, John Ivan, Kai Wang, Shanshan Zhao, Joshua Auld, Naveen Eluru

Civil and Environmental Engineering Faculty Publications and Presentations

In this paper, a framework is outlined to generate realistic artificial data (RAD) as a tool for comparing different models developed for safety analysis. The primary focus of transportation safety analysis is on identifying and quantifying the influence of factors contributing to traffic crash occurrence and its consequences. The current framework of comparing model structures using only observed data has limitations. With observed data, it is not possible to know how well the models mimic the true relationship between the dependent and independent variables. Further, real datasets do not allow researchers to evaluate the model performance for different levels of …

Implementing A Solar Photovoltaic Station In Watering Systems Utilizing Complex Software, Akbarxon Sarvar O'G'Li Uroqov, Faxriddin Jaylovovich Nosirov, G'Olibjon Pardayevich Arzikulov, Zarina Amriddin Qizi Sayfutdinova

Technical science and innovation

This article explores the benefits of transitioning from traditional agricultural irrigation systems to more cost-effective alternatives powered by renewable energy sources. By integrating solar photovoltaic technology into irrigation processes, significant reductions in resource wastage, estimated at 45-50%, are achievable through the implementation of drip irrigation techniques. This results in enhanced agricultural productivity. Moreover, the utilization of solar panels in green zones mitigates surface temperature increases, contributing to a 2-5% boost in electricity production. Currently, irrigation facilities primarily rely on the main energy grid. However, transitioning to renewable energy sources decreases reliance on non-renewable fuels, reduces greenhouse gas emissions, and fosters …

Theory Of Development And Improvement Of The Mathematical Model Of The Methodology Of Public Control In The Management Of Occupational Safety And Industrial Risks, Aliakbar Khamidullaevich Rasulev, Sunnatilla Suleymanovich Suleymanov, Nodira Bakhadirzhanovna Gaibnazarova

Technical science and innovation

The article develops and analyzes a mathematical model based on a logical flowchart of the methodology of public control in the management of occupational safety and industrial risks and probability theory, according to the model, the results of compliance with the requirements of social cooperation on occupational safety lead to a sharp increase in the probability of reliability, management efficiency becomes higher. Analysis of the mathematical model of the developed logical flowchart based on probability theory has shown that when the parties cooperate to monitor the results of compliance with labor protection requirements, they lead to a sharp increase in …

Research Of The Influence Of Dust On Photovoltaic Modules, Anvarjon Mirolimov, Xalmurat Iliev

Technical science and innovation

The influence of dust concentrations on the current-voltage characteristics (voltampere characteristics) of photovoltaic modules (PVM) based on crystalline silicon in laboratory conditions. It was investigated how an uncleaned panel affects the output power. The tests were carried out in the city of Tashkent on the territory of the “National Research Institute of Renewable Energy Sources”. The objects were located co-plurally as specified in GOST R 60904-1 Photoelectric devices. Part 1. Measurement of current-voltage characteristics. Measurements of a cleaned photovoltaic module with a maximum power of 330 W and not a cleaned one of 236 W were obtained. Based on the …

Assessment Of Improvement In Unpaved Roadway Performance Using 3d Geogrids Under Cyclic Loading, Munibhaskar Pagadala

Doctoral Dissertations and Master's Theses

Geogrids have been used for decades to improve the performance in both paved and unpaved road construction. This research focuses on quantifying the performance and optimizing the design of unpaved roadways using the results from an extensive cyclic triaxial testing program. Twenty-seven cyclic triaxial tests were performed, consisting of unreinforced (control) and reinforced samples using two types of 3D geogrids: Grid1 and Grid2. The samples measured 150 mm in diameter and a height of 300 mm. The tests were run under different loading sequences ranging from 41 kPa to 55 psi (6 psi to 8 psi of confining stress and …

Selective Oxidation Of Iron In Chalcopyrite For Enhanced Copper Recovery, Khojiakbar Shuxrat O'G'Li Sultonov, Shokhrukh Toshpulatovich Khojiev, Gulnoza Berdiyor Qizi Beknazarova, Malika Sayfullayevna Saidova

Technical science and innovation

This study explores the thermodynamic feasibility of selectively oxidizing iron contained in chalcopyrite mineral while preventing the oxidation of copper sulphide, with the ultimate goal of enhancing the copper concentration in the sulphide concentrate. A redox reaction in the solid phases between chalcopyrite and copper (I) oxide was constructed and subjected to thermodynamic analysis. The research identifies a crucial temperature range of 498-598 K (225-325 °C) as the most favourable for the redox reaction. The equilibrium constants at the selected optimal temperatures, 1.152 for chalcopyrite and 1.137 for copper (I) oxide, indicate that the redox reaction adheres to the expected …

Solving Water Resources Problems - Water Saving In The Republic Of Uzbekistan, Rustam Muxammatdjanovich Raximov

Technical science and innovation

In this article we will talk about the problems of water resources in the Republic of Uzbekistan. The problem of drinking water supply, solutions to provide drinking water to the population of Uzbekistan. The largest consumers of fresh water in Uzbekistan are farmers. Due to outdated infrastructure, 40% of water is wasted. Rising food prices and the risk of spreading disease are the first signs of water shortages that we may experience in the coming еars. Uzbekcosmos told how to solve the problem. Water is an invaluable resource used not only in the home, but also in the production and …

Modelling Of Heat Transfer In An Air Solar Collector, Shakhnoza Abduvaxitovna Sultanova, Jasur Esirgapovich Safarov, A.A. Mambetsheripova

Technical science and innovation

This study is the prediction, depending on time and different geographical and climatic situations, of different operating parameters: solar radiation, ambient and outlet coolant temperature, heat exchange coefficients and losses. All these determine, in the absence of measurements, the efficiency of the system modelled with existing models with respect to these parameters. These models are usually compared with experimental results. Before modelling, it is necessary to investigate the different heat transfer and exchange regimes that exist between the different elements of this system in order to eventually have a system of equations governing this exchange. The modelling principle is to …

A Study On The Influence Of Cutting Parameters On Surface Roughness And Visualization Through Contour Plots And 3d Surface Profiles, Zayniddin Nosirovich Muxiddinov

Technical science and innovation

This research investigates the intricate relationship between cutting parameterscutting speed, feed rate, and depth of cut and surface roughness in machining processes. Surface roughness is a key determinant of machined surface quality, and optimizing cutting parameters is crucial for achieving superior finishes. Employing advanced visualization techniques, including contour plots and 3D surface profiles, the study offers a comprehensive exploration of surface topography dynamics. Statistical analyses and regression modeling enhance the quantitative understanding of how cutting parameters interact to shape surface roughness. The research affirms the significant influence of cutting speed, feed rate, and depth of cut, providing practical insights for …

Reliability Of Using Secondary And Tertiary Treated Wastewater In Concrete Mixing And Curing, Amany G. Micheal Prof., Haidy Abd El Salam

Architectural Engineering

Water scarcity is a problem that faces many regions. In a developing and arid countries, the need for fresh water is exponentially increasing. One of the most water consuming industries is the construction industry, especially in concrete manufacturing. This research is an evaluation of the Reliability of recycled wastewater to be used in concrete manufacturing. Two different wastewater treatment regimens are implemented: secondary and tertiary treated wastewater. The treated wastewater, either secondary or tertiary, replaces potable water with percentages of 25%, 50%, and 100%. The mixture of the two types of water is used in concrete mixing and curing. Control …

Comprehensive Understanding Of Factors Impacting Competitive Construction Bidding, Muaz O. Ahmed, Islam H. El-Adaway, Aubrie Caldwell

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Construction competitive bidding has been studied by many researchers; however, their focus was mainly on certain bidding aspects. Thus, despite their value, existing bidding models have limited applicability for various reasons including the non-inclusion of some real-life factors that impact bidding-related decisions. As such, there is a need for identifying a comprehensive list of bidding factors that impact construction bidding-related decisions, studying their associations, and identifying understudied factors to direct future research efforts. This paper fills this knowledge gap. First, the authors conducted a systematic selection of 124 construction bidding-related articles published within the past 40 years. Second, the authors …

Bioaerosol Size As A Potential Determinant Of Airborne E. Coli Viability Under Ultraviolet Germicidal Irradiation And Ozone Disinfection, Weixing Hao, Yue-Wern Huang, Yang Wang

Biological Sciences Faculty Research & Creative Works

Ultraviolet germicidal irradiation (UVGI) and ozone disinfection are crucial methods for mitigating the airborne transmission of pathogenic microorganisms in high-risk settings, particularly with the emergence of respiratory viral pathogens such as SARS-CoV-2 and avian influenza viruses. This study quantitatively investigates the influence of UVGI and ozone on the viability of E. coli in bioaerosols, with a particular focus on how E. coli viability depends on the size of the bioaerosols, a critical factor that determines deposition patterns within the human respiratory system and the evolution of bioaerosols in indoor environments. This study used a controlled small-scale laboratory chamber where E. …

Development Of Bamboo Connections With Iteso Universisdad In Guadalajara, Mexico, Turner Uyeda

Civil, Environmental and Sustainable Engineering Senior Theses

In years prior, faculty and students at ITESO Universidad in Guadalajara, Mexico, have worked with local low-income communities in the development of bamboo structural end-to-end connections. To advance and expand on this bamboo structural research, faculty from ITESO reached out to Santa Clara University’s Frugal Innovation Hub to get a new perspective on the problem. With the given constraints of cost and strength, the engineer was otherwise free to explore solutions independently. In order to address the needs of the low-income community that ITESO faculty sought to help, a series of bamboo connections making use of bamboo culm end modifications …

Effects Of Rest Time And Curing Regime On Short- And Long-Term Strength Of Class C Fly Ash-Based Alkali-Activated Mortars, Cedric Kashosi, Ahmed Gheni, Eslam Gomaa, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated how different rest times affect the strength development of fly-ash-based alkali-activated mortar (aam) over a period of 90 days. Two types of fly ash with varying calcium oxide contents of 37 and 21% were used. The rest times ranged from 2 to 36 h, and three curing methods (ambient, oven, and steam) were tested. The results showed that the rest time significantly influenced the compressive strength of the aam. The optimal rest time was found to be between 12 and 30 h depending on the curing method and fly ash type. Beyond this range, there were only …

Calculaser S.A. - Colombian Medical Clinic, Aaron Bumagat, Cody Ferguson, Daniela Valencia-London, Joell Macias

Civil, Environmental and Sustainable Engineering Senior Theses

This report presents a comprehensive ground up design for the Calculaser S.A. medical clinic, located in Pereira, Risaralda, Colombia. The clinic contributes to providing affordable and comprehensive preventative healthcare services, bridging regional disparities and catering to individuals who may face limitations in accessing certain medical facilities. Calculaser aligns with the goal of fostering a more inclusive and accessible healthcare environment, striving to enhance the well-being of the surrounding population.

The design provided in this report will include three (3) main scopes: transportation & municipal, structural, and construction management. The transportation scope covers a configuration of the proposed parking garage, an …

Solar Panel Canopies Over Central Valley Canals, Danial Garcia, Sam Loeffler, Luke Shoenberger, Thomas Vithanage

Civil, Environmental and Sustainable Engineering Senior Theses

California's agricultural presence is undeniably as impressive as it is important, but there is an ongoing significant challenge that the irrigation systems have grappled with: evaporation loss. Annually, a tremendous 63 billion gallons of water is lost due to evaporation along 4,000 miles of canals within California (source). In response to this issue, a new initiative emerged which is the implementation of solar panel over a section of the irrigation canals near Kettleman City. The team's structure is constructed using a steel cable truss along a 164 foot span. This structure both decreases evaporation and contributes to California's mission to …

Sustainable Design And Construction With Cob, Alessandro Moya, Bailey Mclaughlin, Maddie Ly, Quinn Boardman

Civil, Environmental and Sustainable Engineering Senior Theses

Conventional building materials contribute to over 16% of global greenhouse gas emissions annually, therefore, more sustainable materials must be explored. The most readily available material is earth, cob being one of them. Cob is a monolithic earthen material made up of sand, clay, and straw, integrated using water. While this material has been used for thousands of years across the world, it is lacking research, and thus, limiting its implementation into official codes. This project tested six (6) 2’x 2’ cob walls, three (3) six (6) inch thick walls and three (3) twelve (12) inch thick walls using the ASTM …

Standardized Sustainable Rapid Housing Design, Octavio Diaz, Ernesto Escalante, Lily Sieber

Civil, Environmental and Sustainable Engineering Senior Theses

DignityMoves is an organization committed to providing interim supportive housing to the unhoused population. DignityMoves partners with philanthropic organizations, owners, and cities to borrow unused and empty lands for anywhere from five (5) to twenty (20) years and organize the development of sites using prefabricated modular tiny homes. These homes meet housing department codes and standards while also allowing DignityMoves to capitalize on city emergency housing codes.

The goal of this project is to address the structural, geotechnical, greywater, building envelope, and construction management scopes of building interim supportive housing sites to create standardized solutions that:

(a) Lower the cost …

Utilizing Ensemble Learning In The Classifications Of Ductile And Brittle Failure Modes Of Uhpc Strengthened Rc Members, Woubishet Zewdu Taffese, Yanping Zhu, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study aims to achieve the swift and precise classification of ductile and brittle failure modes in flexural reinforced concrete (RC) members, specifically those with tension sides strengthened by ultrahigh performance concrete (UHPC). Employing six ensemble learning techniques—Bagging, Random Forest, AdaBoost, Gradient Boosting, XGBoost, and LightGBM—the authors utilize a comprehensive dataset comprising 14 features, which include manually labeled failure modes obtain from load–deflection curves. The model training spans four scenarios, varying in the inclusion or exclusion of features describing the cross-sectional area of RC members and moment resistance. XGBoost emerges as the most effective classifier, achieving an impressive 84% accuracy …

Modeling Injury Severity Of Truck-Involved Crashes Under Covid-19 Regulatory Changes, William Mckenzie

Civil and Environmental Engineering Master's Project Reports

At the start of the pandemic the Federal Motor Carrier Safety Administration issued declaration No. 2020-002 which included a long list of goods given temporary emergency relief (deregulation) from national statutes 49 CFR Parts 390-399 of the Federal Motor Carrier Safety Regulations that oversee trucking. In particular, this granted emergency relief from Title 49 CFR § 395.3: maximum driving time for motor carriers or their drivers, regarded as hours-of-service (HOS), and subsequently further expanded to include short-haul trips, adverse driving conditions, break requirements, and sleeper berths. Regulations which play a crucial role in establishing the safe operation and management of …

Multifunctional Models In Digital And Physical Twinning Of The Built Environment—A University Campus Case Study, Genda Chen, Ibrahim Alomari, Woubishet Zewdu Taffese, Zhenhua Shi, Mohammad Hossein Afsharmovahed, Tarutal Ghosh Mondal, Son Nguyen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Digital Twin (DT) Concept Has Been Developed for a Single Function in Previous Studies. This Study Aims to Empower DTs with a Layered Integration of Multifunctional Models in the Built Environment. It Develops a Framework of DT Modules in Three Hierarchical Tiers: Region, Asset, and System; Defines a New Concept of the Degree of Digital Twinning (DODT) to the Real World by the Number of Models Enabled by a Common DT Platform; and Enables Spatiotemporal Analysis in Multiple Scales to Couple Nonstructural with Structural Building Components and Connect the Built Environment to Planning Constructions. While the Asset and System …

10 Meters To Disaster: The Challenges Of Premature Application Of Circular Economy Strategies In Jakarta’S Waste Management Structure, Almira Bowo

Independent Study Project (ISP) Collection

Jakarta's complex issue of waste management encompasses a multitude of challenges that include inefficiencies in infrastructure, a lack of public awareness of the consequences of an inadequate waste system, socioeconomic disparities, and a deficiency in intersectoral collaboration. The urgency for holistic and sustainable solutions that prioritize proactive waste collection is underscored by the complexities of these dynamics. This field study paper argues that the attention that is being drawn towards trending waste management innovations, which are reactive strategies, could bring the waste crisis in Jakarta to an even more critical state. The sections will critically examine current waste management efforts …