Civil and Environmental Engineering Commons^™

Mechanistic And Economical Characteristics Of Asphalt Rubber Mixtures, Mena I. Souliman, Annie Eifert

Civil Engineering Faculty Publications and Presentations

Load associated fatigue cracking is one of the major distress types occurring in flexible pavement systems. Flexural bending beam fatigue laboratory test has been used for several decades and is considered to be an integral part of the new superpave advanced characterization procedure. One of the most significant solutions to prolong the fatigue life for an asphaltic mixture is to utilize flexible materials as rubber. A laboratory testing program was performed on a conventional and Asphalt Rubber- (AR-) gap-graded mixtures to investigate the impact of added rubber on the mechanical, mechanistic, and economical attributes of asphaltic mixtures. Strain controlled fatigue …

Mentored Environment For Isogeometric Analysis, Kevin Tew, Michael Scott

Journal of Undergraduate Research

The mentored environment for isogeometric analysis (IGA) has trained engineering and computer science students to develop isogeometric numerical methods and accompanying software to solve challenging problems in science and engineering. The mentoring environment consisted of:

1. Weekly group meetings where research concepts were discussed, scientific literature was reviewed, and progress was monitored.
2. Pairing of students with a faculty members to develop IGA design-through-analysis methodologies.
3. Preparation of results for peer-reviewed publications.

Meg Report: Elastic Frames For Earthquake Resistance, Paul Richards

Journal of Undergraduate Research

The topic of the proposal was steel frames with superior elastic energy capacity that will permit buildings to better withstand severe earthquake loading. The anticipated outcomes related to mentoring were: each student researcher would be the lead author on a conference publication, students would present results at a national conference, and each student researcher would be a co-author on a journal article; with the graduate student researcher as a lead author.

Increasing The Capacities Of Cable Cars For Use In Public Transport, Sergej Težak, Drago Sever, Marjan Lep

Journal of Public Transportation

This paper examines the advantages and disadvantages of cable cars in public transport within urban areas. The advantages of cable car transport compared to other modes of transport are its quiet operation with an environmentally-acceptable electric drive and the possibility of transporting passengers above the ground, which can provide additional transport dimensions within urban centers. However, cable cars have some disadvantages, especially their smaller capacities in relation to other modes of transport within the urban environment. Today's built cable cars have capacities up to 2,000 persons/h for aerial tramways (or jig-back ropeways) and up to 4,000 persons/h for gondolas.

Solutions …

Willingness To Use A Public Bicycle System: An Example In Nanjing City, Peiyu Feng, Wenquan Li

Journal of Public Transportation

The purpose of this paper is to examine the influence factors on willingness to use a public bicycle system and to analyze the impact of each. Ordered Logit and Probit models were used to analyze the change in user willingness after improvements were made. Data were collected from a random survey conducted in September and October 2014 in Nanjing, China. The findings of this research indicate seven factors that most influence willingness to use a public bicycle system, including socioeconomic factors and journey restrictions. Socioeconomic factors (gender, employment, and car ownership) have more impact on user willingness than journey restrictions. …

The Effects Of Access And Accessibility On Public Transport Users’ Attitudes, Subeh Chowdhury, Kasey Zhai, Asif Khan

Journal of Public Transportation

This study investigates existing users’ attitudes towards public transport from two perspectives. First, the effects of accessibility to various destinations and ease of access to terminals on public transport users’ attitudes are determined. Second, the contribution of social norm, as an information source, in the formation of users’ attitudes is assessed. A user-preference survey was undertaken in Auckland, New Zealand, at two terminals. Data were analyzed using ordinal and logistic regression models. Findings showed that residential density and quality of the built environment, particularly safety, have an effect on the number of pedestrians who access a terminal. Accessibility to various …

Construction Industry Professionals Perception Of Project Management Certification In The Houston Texas Region, Lana K. Coble, Margaret D. Watson

The Professional Constructor

Individual construction design professionals are evaluated on their abilities by state licensing boards in all 50 states of North America. The construction industry has relied upon construction company licenses in 42% of the United States to ensure that buildings are constructed to local area codes. Current practices have created a credibility gap when comparing construction managers to design professionals. Only since the 1970s, have third party agencies led an effort to provide construction management professionals with a certification to establish baseline competencies. To date, research on construction manager certification has been minimal; therefore, this research attempts to contribute to needed …

Measuring Organizational Learning Success In Commercial Construction During Economic Recession, Evan Danforth, Justin Weidman, Clifton Farnsworth

The Professional Constructor

The method through which organizations collect and internalize knowledge, termed organizational learning, has been theorized to significantly influence company performance. Specifically, the speed and accuracy of knowledge transfer boasted by organizational learning proponents is thought to assist companies in dealing with, and even benefiting from, environmental changes such as economic volatility. This research studied the organizational learning of fifteen commercial construction companies in the southwestern United States during the 2008-2009 U.S. recession through semi-structured interviews. It was found that the companies that exhibited dramatically higher or lower levels of organizational learning generally experienced correspondingly higher or lower performance. The contribution …

Strategies For Reducing The Environmental Impacts Of Construction “Improving Erosion And Sedimentation Control Practices On Construction Projects”, Richard Pate Jr

The Professional Constructor

There are numerous potential impacts associated with constructing our built environment; one in particular is fresh on contractor’s minds around the country and that is the erosion and sedimentation of our waterways. In this essay, I explain why this issue has become such a pivotal discussion within construction and green building efforts, what strategies have recently become available for addressing these issues, and how their implementation will affect a project’s overall budget and schedule. The strategies I have chosen to discuss are silt fence tieback systems, polyacrylamide (PAM) flocculants, and unmanned aerial vehicle inspections.

Strategies For Reducing The Environmental Impacts Of Construction, Alex Stewar

The Professional Constructor

In order to carry out a successful and sustainable construction project, quality project planning isessential. In this paper, I will discuss how design and preconstruction are the most important parts of a sustainableconstruction project. The three main points will be about the importance of selling sustainability to the owner, choosingthe proper project delivery method to integrate team members, and planning for the future when designing the project.Finally, I will touch on how my own education through the Construction Science and Management program at ClemsonUniversity has prepared me for this new era of construction.

Structural Damage Detection By Comparison Of Experimental And Theoretical Mode Shapes, William George Rosenblatt

Master's Theses

Existing methods of evaluating the structural system of a building after a seismic event consist of removing architectural elements such as drywall, cladding, insulation, and fireproofing. This method is destructive and costly in terms of downtime and repairs. This research focuses on removing the guesswork by using forced vibration testing (FVT) to experimentally determine the health of a building. The experimental structure is a one-story, steel, bridge-like structure with removable braces. An engaged brace represents a nominal and undamaged condition; a dis-engaged brace represents a brace that has ruptured thus changing the stiffness of the building. By testing a variety …

Exploring Transit Ridership Using Census, Routing & Scheduling, And Stop Characteristic Data, Douglas Harvey Moody

Master's Theses

This study develops, analyzes, and a­­­­­pplies transit-system-specific regression tree models that identify and prioritize transit system improvements through analysis and application of ridership, Census, routing and scheduling, and transit stop characteristic data. Regression trees identify and rank independent variables that split dependent variable datasets into meaningful subsets according to significant relationships with independent variable datasets, and regression tree models can be used to identify and prioritize transit system improvements. In this study, ridership datatypes are the dependent variables (i.e., boardings and alightings) and Census, routing and scheduling, and transit stop characteristic datatypes are the independent variables. Data associated with the …

Predicting Construction Labor Productivity With Bayesian Belief Networks, Ayoub Hazrati

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Construction labor productivity plays an important role in labor intensive projects. Therefore, increasing construction labor productivity is a vital task to decrease a project’s cost (time). The primary goal of this research is to investigate the feasibility of developing a comprehensive causal model that can predict construction labor productivity for various project’s situations, such as existence of “Adverse Weather,” “Changes,” “Working Overtime,” etc., while considering uncertainty. It is found that Bayesian Belief Networks (BBNs) is the best approach that can model causal relationships among different factors while considering uncertainty, simultaneously.

Developing a BBNs model requires to extract its structure and, …

Lateral Resistance Of Pipe Piles Behind A 20-Foot-Tall Mse Wall With Welded-Wire Reinforcements, Ryan Thomas Budd

Theses and Dissertations

Pile foundations for bridges must often resist lateral loads produced by earthquakes and thermal expansion and contraction of the superstructure. Right-of-way constraints near bridge abutments are leading to an increased use of mechanically stabilized earth (MSE) walls below the abutment. Previous research has shown that lateral pile resistance can be greatly reduced when piles are placed close to MSE walls but design codes do not address this issue. A full-scale MSE wall was constructed and 24 lateral load tests were conducted on pipe, square and H piles spaced at distances of about 2 to 5 pile diameters from the back …

The Influence Of Pile Shape And Pile Sleeves On Lateral Load Resistance, Dalin Newell Russell

Theses and Dissertations

The lateral resistance of pile foundations is typically based on the performance of round piles even though other pile types are used. Due to lack of data there is a certain level of uncertainty when designing pile foundations other than round piles for lateral loading. Theoretical analyses have suggested that square sections will have more lateral resistance due to the increased side shear resistance, no test results have been available to substantiate the contention. Full-scale lateral load tests involving pile shapes such as circular, circular wrapped with high density polyethylene sheeting, square, H, and circular with a corrugated metal sleeve …

Simple Models For Estimating The Rotational Stiffness Of Steel Column-To-Footing Connections, Joshua Edwin Tryon

Theses and Dissertations

Despite the crucial role they play in transferring loads from the superstructure to the foundation, steel column-to-footing connections have received little attention in research. Though shallow embedded connections are typically characterized as pinned, studies have shown that they exhibit significant rotational stiffness. The objective of this thesis is to quantify the rotational stiffness of such connections. A method named the continuum model is developed by which the rotational stiffness of embedded connections may be calculated. Outputs from this model are compared with experimental data on steel connections embedded in concrete. The continuum model is shown to be capable of reasonably …

Evaluation Of Passive Force On Skewed Bridge Abutments With Controlled Low-Strength Material Backfill, Kevin Bjorn Wagstaff

Theses and Dissertations

Although its use has become more widespread, controlled low-strength material, or CLSM, has fallen through the crack between geotechnical engineering and materials engineering research. The National Ready Mix Association states that CLSM is not a low strength concrete, and geotechnical engineers do not consider it as a conventional aggregate backfill. The use of CLSM as a bridge abutment backfill material brings up the need to understand the passive force versus backwall displacement relationship for this application. To safely account for forces generated due to seismic activity and thermal expansion in bridge design, it is important to understand the passive force …

Evaluation Of Lightweight Pieces In Aggregates, Mark Lindemann, Doug Macke, Jim Wilken, John Ebito, Mark Hassler, Lieska Halsey, Bob Seger

Nebraska Department of Transportation: Research Reports

Nebraska Department of Roads (NDOR) Material and Research (M&R) Division started an evaluation to determined injurious deleterious lightweight pieces of aggregate from a dry pit location, as a result of field observations from a project stock pile. This brief summary presents the field observation and laboratory testing evaluations to determine the percent of lightweight pieces in aggregate.

Evaluation Of Lightweight Pieces In Aggregates, Mark Lindemann, Doug Macke, Jim Wilken, John Ebito, Mark Hassler, Lieska Halsey, Bob Seger

Nebraska Department of Transportation: Research Reports

No abstract provided.

Active Traffic Management Case Study: Phase 1, Anuj Sharma, Shuo Wang, Aemal Khattak

Nebraska Department of Transportation: Research Reports

This study developed a systematic approach for using data from multiple sources to provide active traffic management solutions. The feasibility of two active traffic management solutions is analyzed in this report: ramp-metering and real-time crash risk estimation and prediction. Using a combined dataset containing traffic, weather, and crash data, this study assessed crash likelihood on urban freeways and evaluated the economic feasibility of providing a ramp metering solution. A case study of freeway segments in Omaha, Nebraska, was conducted. The impact of rain, snow, congestion, and other factors on crash risk was analyzed using a binary probit model, and one …

Thermal Mass Behaviour Of Concrete Panels Incorporating Phase Change Materials, Dervilla Niall, Roger West, Sarah Mccormack, Oliver Kinnane

Conference papers

Phase Change Materials (PCM) have been incorporated into a range of building envelope materials with varied success. This study investigates two different methods of combining concrete and phase change materials to form PCM/concrete composite panels. The first method involves adding microencapsulated paraffin to fresh concrete during the mixing process. The second method involves vacuum impregnating butyl stearate into lightweight aggregate which is then included in the concrete mix design. The primary aim of the study is to determine which method is the most effective way to improve the thermal mass characteristics of a concrete panel in the context of a …

Automated Vehicles: A Guide For Planners And Policymakers, Charlie Coles

Master's Theses

Automated vehicles are those which are capable of sensing their environments in order to perform at least some aspects of the safety-critical control (like steering, throttling, or braking) without direct human input. As a guide for planners and policymakers, the objective of this thesis is to develop a strong foundation for anticipating the potential impacts resulting from advancements in vehicle automation. To establish the foundation, this thesis uses a robust qualitative methodology, coupling a review of literature on the potential advantages and disadvantages of vehicle automation and lessons from past innovations in transportation, with recent trends of the Millennial Generation, …

The Impact Of Bicycle Corridors On Travel Demand In Utah, Christopher Kent Haskell

Theses and Dissertations

Bicycling as an alternate mode of transportation has been on the rise. It is environmentally friendly in nature and the associated health benefits have made it a popular choice for many types of trips. The purpose of this research is to increase understanding of the impacts of implementing bicycle corridors (as part of the Utah Department of Transportation's (UDOT) Inclusion of Active Transportation policy) on bicycle rate as a function of roadway characteristics. The results of this research will be used in determining when and where bicycle corridors will enhance the transportation system and an estimate of the overall impact …

Design, Development And Testing Of Web Services For Multi-Sensor Snow Cover Mapping, Jiri Kadlec

Theses and Dissertations

This dissertation presents the design, development and validation of new data integration methods for mapping the extent of snow cover based on open access ground station measurements, remote sensing images, volunteer observer snow reports, and cross country ski track recordings from location-enabled mobile devices. The first step of the data integration procedure includes data discovery, data retrieval, and data quality control of snow observations at ground stations. The WaterML R package developed in this work enables hydrologists to retrieve and analyze data from multiple organizations that are listed in the Consortium of Universities for the Advancement of Hydrologic Sciences Inc …

Bs News March/April

Building Services Engineering

No abstract provided.

Evaluation Of Strength Reduction Factor For Concentrically Braced Frames Based On Nonlinear Single Degree-Of-Freedom Systems, Ryan Michael Slein

Master's Theses

Strength Reduction Factor (R-Factor), often referred to as Response Modification Factor, is commonly used in the design of lateral force resisting systems under seismic loading. R-Factors allow for a reduction in design base shear demands, leading to more economical designs. The reduction of strength is remedied with ductile behavior in members of proper detailing. Modern seismic codes and provisions recommend R-Factors for many types of lateral force resisting systems. However these factors are independent of the system fundamental frequency and many other important system properties, resulting in factors that may result in an unfavorable seismic response. To evaluate the validity …

Seasonal And Dilution Rate Impacts On Nannochloropsis Oceanica Productivity In Algae Raceway Ponds, Garrett Dameron Murawsky

Master's Theses

Biomass growth of the alga Nannochloropsis oceanica, cultivated outdoors in six pilot-scale raceway ponds, was monitored over the course of 1.5 years, at two different dilution regimes each season, to establish the effects on algal biomass productivity and concentration of dilution rate, pond water temperature, and solar radiation. The 4.5-m² ponds were located in a mild, mid-latitude, coastal region (central California). Experimental conditions were operated in duplicates or triplicates with a consistent artificial seawater medium, pond depth, pH range, paddle wheel mixing speed, and replete nutrient conditions for the duration of the study. Two cultivation regimes were used …

Thawing Out: The Role Of The Arctic Council Service In A Melting Arctic, Taylor J. Enos

Pell Scholars and Senior Theses

With the changing natural and political climate of the Arctic, conflicts over resource extraction and navigation will become inevitable. Empowering an intergovernmental institution like the Arctic Council Service may be the only solution. This paper analyzes the importance and history of the Arctic as a political environment, which is prone to abuse in the very near future at the hands of Russia and the United States.

Evaluation Of The Accuracy Of Approach Volume Counts And Speeds Collected By Microwave Sensors, Gregory Hans Sanchez

Theses and Dissertations

This study evaluates the accuracy of approach volumes and free flow approach speeds collected by the Wavetronix SmartSensor Advance sensor using the field data collected by JAMAR counter boards for free flow approach volumes and a TruCam LiDAR gun for approach speeds. The Advance sensor is primarily designed for dilemma zone reduction. It does not have the capability to differentiate between lanes, but the Advance sensor currently used has a detection range of up to 600 ft. and has the capability to track vehicles approaching the intersection. The Utah Department of Transportation (UDOT) wanted to use this capability to get …

Spring 2016 - Volume 40, Number 1, Full Issue

The Professional Constructor

No abstract provided.