Civil and Environmental Engineering Commons^™

Assessing The Performance Of A Soy Methyl Ester -Polystyrene Topical Treatment To Extend The Service Life Of Concrete Structures, D'Shawn G. Thomas

Open Access Theses

Experimental results show that soy methyl ester (SME), a derivative of soy bean oil, along with the incorporation of polystyrene (PS) is a non-toxic, biodegradable and renewable material that can be used effectively as a topical concrete surface treatment. While, concrete sealants and topical surface treatments can be used to extend to durability of concrete structures, it is difficult to predict the durability of concrete structures sealed with a sealant or topical surface treatment. This is due to a lack of necessary model inputs that can be used to address the durability of concrete structures treated with these materials. In …

Development And Evaluation Of A Watershed-Scale Hybrid Hydrologic Model, Younghyun Cho

Open Access Dissertations

A watershed-scale hybrid hydrologic model (Distributed-Clark), which is a lumped conceptual and distributed feature model, was developed to predict spatially distributed short- and long-term rainfall runoff generation and routing using relatively simple methodologies and state-of-the-art spatial data in a GIS environment. In Distributed-Clark, spatially distributed excess rainfall estimated with the SCS curve number method and a GIS-based set of separated unit hydrographs (spatially distributed unit hydrograph) are utilized to calculate a direct runoff flow hydrograph, and time-varied SCS CN values and conditional unit hydrograph approach for different runoff depth-based flow convolution are also used to compute long-term rainfall-runoff flow hydrographs. …

Micro- And Nanoparticulates For Dna Vaccine Delivery, Eric Farris, Deborah M. Brown, Amanda Ramer-Tait, Angela K. Pannier

Department of Agricultural and Biological Systems Engineering: Faculty Publications

DNA vaccination has emerged as a promising alternative to traditional protein-based vaccines for the induction of protective immune responses. DNA vaccines offer several advantages over traditional vaccines, including increased stability, rapid and inexpensive production, and flexibility to produce vaccines for a wide variety of infectious diseases. However, the immunogenicity of DNA vaccines delivered as naked plasmid DNA is often weak due to degradation of the DNA by nucleases and inefficient delivery to immune cells. Therefore, biomaterial-based delivery systems based on micro- and nanoparticles that encapsulate plasmid DNA represent the most promising strategy for DNA vaccine delivery. Microparticulate delivery systems allow …

Asphalt Pavement Preservation Using Rejuvenating Fog Seals, Ammanuiel A. Kebede

Open Access Theses

Fog seal is a type of treatment that uses a diluted asphalt emulsion to seal and protect an existing asphalt surface from a variety of distresses. Fog seal is sprayed on top of an asphalt pavement surface to improve and protect it from further cracking and raveling. Rejuvenator is also a type of treatment that penetrates into the asphalt pavement and restores its original viscoelastic properties. Similarly, like fog seal, rejuvenators can be sprayed on top of an asphalt pavement surface. The use of rejuvenators has grown rapidly in the past decade. However, little is known about the actual effectiveness …

Planning For Climate Change: The Need For Mechanistic Systems-Based Approaches To Study Climate Change Impacts On Diarrheal Diseases, Jonathan E. Mellor, Karen Levy, Julie Zimmerman, Mark Elliott, Jamie Bartram, Elizabeth Carlton, Thomas Clasen, Rebecca Dilingham, Joseph Eisenberg, Richard Guerrant, Daniele Lantagne, James Mihelcic, Kara Nelson

Civil and Environmental Engineering Faculty Publications

Increased precipitation and temperature variability as well as extreme events related to climate change are predicted to affect the availability and quality of water globally. Already heavily burdened with diarrheal diseases due to poor access to water, sanitation and hygiene facilities, communities throughout the developing world lack the adaptive capacity to sufficiently respond to the additional adversity caused by climate change. Studies suggest that diarrhea rates are positively correlated with increased temperature, and show a complex relationship with precipitation. Although climate change will likely increase rates of diarrheal diseases on average, there is a poor mechanistic understanding of the underlying …

Procedural Treatment Options To Address Intermittent Pentachlorophenol Effluent Exceedances At A Former Wood-Treatment Site In Butte, Montana, Travis Dunkle

Graduate Theses & Non-Theses

The Montana Pole and Treating Plant in Butte, Montana treated wood with preservatives, mainly pentachlorophenol (PCP), which had been dissolved in a carrier fluid. Accidents and careless handling spilled large quantities of the fluid on the site, contaminating the vadose zone and groundwater. This site has been undergoing remediation since it was added to the CERCLA National Priorities List in 1987. Pentachlorophenol and dioxin are the contaminants of concern. Remediation technologies have included soil removal and installation of two water recovery trenches that collect groundwater, which is then pumped through a granular activated carbon (GAC) water treatment system. There were …

Characterization Of Heavy Metal Removal From Aqueous Solutions Using Natural Fiber Impregnated With Metallic Nanoparticles, Samantha Hutchenson

Graduate Theses & Non-Theses

Heavy metals are found in varying concentrations in anthropogenically influenced water sources including waste water discharge from mining operations. The heavy metals need to be removed to meet applicable discharge standards and to eliminate potential health effects. There has been substantial research recently in the field of water treatment technologies to produce low-cost materials that have metal-binding capabilities. The goal of this research is to characterize the toxic metal removal capabilities of a novel, low cost water treatment system.

This research uses a natural fiber substrate and incorporates specific nanometallic particles to remove toxic heavy metals from water. Natural fiber …

A Life Cycle Assessment Of A Diesel Generator Set, Kelly Benton

Graduate Theses & Non-Theses

Today, nearly every industry needs a continuous power supply, as data loss can be more expensive than the capital expenditure for the backup power equipment. The demand for emergency standby power (ESP) generator sets is on the rise because of increasing industrialization. With increased industrialization comes a societal concern about the issue of natural resource depletion and environmental degradation. In response, manufacturing companies are providing more sustainable solutions in their products and processes. In this work, the life cycle assessment (LCA) methodology has been applied to quantify the energy demands of each life cycle stage of an ESP generator set …

Characterizing Sources Of Nutrient Loading And Heavy Metals And Developing Best Management Practices For Grove Gulch In Butte, Mt, Garrett Craig

Graduate Theses & Non-Theses

Silver Bow Creek (SBC) – the headwaters for the Clark Fork River – is impaired for total nitrogen (TN) and total phosphorus (TP), as well as several heavy metals, including arsenic, cadmium, copper, lead, and mercury. Blacktail Creek (BTC) is the main tributary of SBC, with Grove Gulch entering BTC before it discharges into SBC. Grove Gulch flows approximately six miles before entering BTC approximately 75 feet upstream of Lexington Avenue, and the stream drains primarily open, rolling range, a historic metal milling site (Timber Butte zinc mill) and a reclaimed mine waste repository that is now Copper Mountain Recreation …

The Professional Constructor, Full Issue, Volume 40, Number 01

The Professional Constructor

No abstract provided.

A Hybrid Strategy In Selecting Diverse Combinations Of Innovative Sustainable Materials For Asphalt Pavements, Baron Colbert, Mohd Rosli Mohd Hasan, Zhanping You

Michigan Tech Publications, Part 1

This project integrates recent innovations of recycled materials used in designing and building sustainable pavements. An increasing environmental awareness and the demand for improving economic and construction efficiencies, through measures such as construction warrantees and goals to reduce air pollution under the Kyoto Protocol, have increased the efforts to implement sustainable materials in roadways. The objective of this research is to develop a systematic approach toward selecting optimum combinations of sustainable materials for the construction of asphalt pavements. The selected materials, warm mix asphalt (WMA), recycled asphalt shingles (RAS), and reclaimed asphalt pavement (RAP) were incorporated in this study. The …

Thermal Properties, Crystallinity, And Oxygen Permeability Of Na-Montmorillonite Reinforced Plasticized Poly(Lactic Acid) Film, Kurniawan Yuniarto, Yohanes Aris Purwanto, Setyo Purwanto, Bruce A. Welt, Hadi Karia Purwadaria, Titi Candra Sunarti

Makara Journal of Technology

Introducing unmodified organically clay/Na-montmorillonite (Na-MMT) was applied into plasticized poly(lactic acid) PLA to produce film composites by direct casting. Film composite structure, the crystallinity degree and form, and thermal properties were carried out using X-ray diffraction and differential scanning calorimetry. The effect of Na- MMT to the tortuous path and the crystallinity degree in the plasticized film composites were calculated in oxygen barrier properties. Chromatogram film composites resulted in an intercalated structure that showed peak diffraction angle shift at about 0.2o. Then, a peak diffraction pattern was indicated in α-form crystal structure. Plasticized PLA has a crystallinity degree at 34%, …

Residual Strength Analysisof Asymmetrically Damaged Ship Hull Girderusing Beam Finite Element Method, Muhammad Zubair Muis Alie

Makara Journal of Technology

The objective of the present study is to analyze the residual strength of asymmetrically damaged ship hull girder under longitudinal bending. Beam Finite Element Method is used for the assessment of the residual strength of two single hull bulk carriers (Ship B1 and Ship B4) and a three-cargo-hold model of a single-side Panamax Bulk Carrier in hogging and sagging conditions. The Smith’s method is adopted and implemented into Beam Finite Element Method. An efficient solution procedure is applied; i.e. by assuming the cross section remains plane, the vertical bending moment is applied to the cross section and three-cargo-hold model. As …

Discrete Power Control In Heterogenous Networks, Yuanyuan Wang, Wibowo Hardjawana, Branka Vucetic

Makara Journal of Technology

In heterogeneous networks (HetNets) where femtocell base stations (FBSs) are deployed within the radio coverage of macrocell base stations (MBSs) to increase network capacity, co-channel interference limits overall system performance with universal frequency reuse. This paper investigates new distributed downlink discrete power control scheme for FBSs in HetNets with FBSs cooperation. The objective of the proposed power control scheme is to maximize the number of simultaneous FBSs transmissions in a single transmission wireless channel where each FBS is allowed to transmit only if the signal-to-interference-noise ratio (SINR) requirements for both FBSs and MBS users are satisfied. We apply a stochastic …

Multi-Project Scheduling Cost Optimization In A Machine Manufacturer Engineer-To-Order, Farizal Farizal, Amar Rachman, Tifani Tandean, Sumarsono Sudarto, Katsuhiko Takahashi

Makara Journal of Technology

This paper discusses the utilization of mixed integer linear programming (MILP) model to optimize cost for multiproject scheduling in a machine maker company. The objective is to minimize total project’s penalty cost and labor cost. The model formulated shows how to achieve the objective i.e. whether to use outsourcing or overtime to finish all projects. The model of multi-project scheduling was solved by Branch & Bound algorithm coded in Lingo 14.0 software. The case study shows that if a company wants to minimize lateness, it should use overtime instead of outsourcing, which minimize total lateness of projects by 144 days …

Analysis Of Arm Movement Prediction By Using The Electroencephalography Signal, Reza Darmakusuma, Ary Setijadi Prihatmanto, Adi Indrayanto, Tati Latifah Mengko, Lidwina Ayu Andarini, Achmad Furqon Idrus

Makara Journal of Technology

Various technological approaches have been developed in order to help those people who are unfortunate enough to be afflicted with different types of paralysis which limit them in performing their daily life activities independently. One of the proposed technologies is the Brain-Computer Interface (BCI). The BCI system uses electroencephalography (EEG) which is generated by the subject’s mental activity as input, and converts it into commands. Some previous experiments have shown the capability of the BCI system to predict the movement intention before the actual movement is onset. Thus research has predicted the movement by discriminating between data in the “rest” …

An Efficient Approach To Reliability-Based Topology Optimization For Continua Under Material Uncertainty, Mehdi Jalalpour, Mazdak Tootkaboni

Civil and Environmental Engineering Faculty Publications

This contribution presents a computationally efficient method for reliability-based topology optimization for continuum domains under material properties uncertainty. Material Young’s modulus is assumed to be lognormally distributed and correlated within the domain. The computational efficiency is achieved through estimating the response statistics with stochastic perturbation of second order, using these statistics to fit an appropriate distribution that follows the empirical distribution of the response, and employing an efficient gradient-based optimizer. Two widely-studied topology optimization problems are examined and the changes in the optimized topology is discussed for various levels of target reliability and correlation strength. Accuracy of the proposed algorithm …

Artificial Neural Networks For Wireless Structural Control, Ghazi Binarandi

Open Access Theses

We live in an age when people desire taller buildings and longer bridges. These increasing demands of more flexible structures challenge civil engineers to ensure structural safety in the state where they are more prone to extreme dynamic loading, such as earthquakes. Extensive wiring required in traditional structural control applications may be expensive and inconvenient, especially for large scale structures. To improve the scalability, wireless sensors offer a promising alternative. However, the presence of time delay and data loss in a wireless sensor network can potentially reduce the performance of the control system. Here an artificial neural network is proposed …

Techniques And Technologies For Decontaminating Chemically Contaminated Premise Plumbing Infrastructure, Karen S. Casteloes

Open Access Theses

Recent large-scale drinking water chemical contamination incidents in Canada and the U.S. have affected more than 1,000,000 people. In all cases premise plumbing has become contaminated and disparate plumbing decontamination approaches have been applied. Premise plumbing components include the service line and piping within the building as well as various appurtenances (i.e., tanks, valves, fixtures). The overall research goal was to identify techniques and technologies that can be used for premise plumbing decontamination. To achieve this goal two separate studies were conducted and are presented as two independent thesis chapters.

The study described in Chapter 1 was designed to understand …

Characterization Of A Continuous-Flow Reactor For Solar Uv Water Disinfection, Margaret M. Busse

Open Access Theses

Lack of access to safe water is a common problem in many developing countries (UNICEF/WHO, 2011). Fortunately, solar ultraviolet (UV) radiation is abundantly available in many of these same areas, and it has been used to accomplish disinfection of drinking water by processes that involve no electrical power, such as solar water disinfection (SODIS). However, conventional SODIS systems are limited by batch processing and exclusion of UVB radiation, which is the most germicidally-active portion of the UV spectrum (Coohill and Sagripanti, 2008). To address these limitations, a continuous-flow solar UV disinfection system was developed to amplify ambient solar UV radiation, …

Dynamic Green Split Optimization In Intersection Signal Design For Urban Street Network, Peng Jiao

Open Access Theses

In the past few decades, auto travel demand in the United States has significantly increased, but roadway capacity unfortunately has not expanded as quickly, which has led to severe levels of highway traffic congestion in many areas. In theory, the problem of congestion addressed through demand management and roadway expansion. However, system expansion in urban areas is difficult due to the extremely high cost of land; therefore, maximizing the existing capacity therefore often is considered the most realistic option. In urban areas, most of the traffic congestion and delays typically occur at signalized intersections. This thesis aims to prove the …

Mining Big Data To Create A Tool For Empirical Observation Of Continuous Safety Improvement In A Construction Company - A Progressive Case Study In The Lean Environment, Nicolas J. Michuda

Open Access Theses

In any iterative process, without a system of measurement, controlled improvement cannot be recorded. This is especially true in the construction industry, where error occurs, often with fatal repercussions. As part of a process to facilitate the establishment of this metric, an entirely new application was created. The goal of this application is to measure the causal factors that lead to incidents, which will allow the user and administration to track the circumstances and types of incidents. This enables the company to focus on these problem areas and improve through training. By analyzing these incident trends over time, the company …

A Framework For Organizational Performance Assessment In The Construction Industry, Zenith Rathore

Open Access Theses

Organizations have been trying to increase their efficiency and improve their performance in order to achieve their goals. Organizational success is determined by various factors that impact organizational performance. Construction industry is a project based industry which is extremely dynamic in nature. The need to identify the weak points and search solutions to improve performance of construction organization is extremely crucial. Previous research works have primarily focused on the measurement of financial or tangible assets. Industry has always focused on measure of project success. However, previous studies lack the understanding of qualitative factors and their combine effect on organizational performance. …

Failure Pressure And Fatigue Analysis Of The Api 12f Shop Welded, Flat Bottom Tanks, Andres E. Rondon Andueza

Open Access Theses

This study investigates the failure pressure on the API 12F shop welded steel tanks and performs a fatigue evaluation to estimate the permissible number of pressure cycles for these equipment. Four different analyses were carried out on more than 350 finite element models to determine various failure pressure modes of these storage tanks. An elastic analysis considering potential buckling modes was developed to determine the yielding pressure of the tanks. The redistribution of stresses due to inelastic deformations and plastic collapse were evaluated through an elastic-plastic stress analysis considering the plastic hardening of the material. A wind load analysis was …

Exploring Large-Scale Parameterization Of Irrigation In The Northern High Plains, Mitch Maguire, Daniel Rico, Katherine Smith, Francisco Munoz-Arriola

UCARE: Research Products

Research Question – Objective - Hypothesis

How does irrigation respond to the demands of Crop Irrigation Requirements under extreme hydrometeorological events?

Implement a parameterization of irrigation into the land surface hydrology model VIC.

Changes in evapotranspiration (ET) will be more conspicuous during dry years, highlighting the limiting role of soil moisture in the model.

Ethanol Based Foamed Asphalt As Potential Alternative For Low Emission Asphalt Technology, Mohd Rosli Mohd Hasan, Zhanping You

Michigan Tech Publications, Part 1

Foamed asphalt typically relies on water as a foaming agent because water becomes gaseous at elevated temperatures, generating numerous tiny bubbles in the asphalt and causing spontaneous foaming. In this study, ethanol was used as a potential alternative to water as a foaming agent. Ethanol is expected to be a physical blowing agent in the same manner as water, except it requires less energy to foam due to its 78 °C boiling point. This study compares the performance of water and ethanol as foaming agents through the measurements of rotational viscosity, the reduction in temperature during foaming, and volatile loss. …

Estimating River Discharge Using Multiple-Tide Gauges Distributed Along A Channel, Hamed R. Moftakhari, David A. Jay, Stefan Talke

Civil and Environmental Engineering Faculty Publications and Presentations

Reliable estimation of freshwater inflow to the ocean from large tidal rivers is vital for water resources management and climate analyses. Discharge gauging stations are typically located beyond the tidal intrusion reach, such that inputs and losses occurring closer to the ocean are not included. Here, we develop a method of estimating river discharge using multiple gauges and time-dependent tidal statistics determined via wavelet analysis. The Multiple-gauge Tidal Discharge Estimate (MTDE) method is developed using data from the Columbia River and Fraser River estuaries and calibrated against river discharge. Next, we evaluate the general applicability of MTDE by testing an …

Long-Term Effectiveness Of Radar Speed Display Signs In A University Environment, Michael R. Williamson, Ryan N. Fries, Huaguo Zhou

SIUE Faculty Research, Scholarship, and Creative Activity

Vehicular speeds are of particular interest in areas with a high number of pedestrians due to the fact that 14-percent of all fatal crashes involve pedestrians. This study investigated the effect of a radar speed display sign placed for an extended period of time, at a location frequented by law enforcement on a road segment entering a university campus with a high number of pedestrians and vehicle speed violations. The statistical analysis included a comparison between AM peak, PM peak, and midday speeds collected one year apart. The data suggested that radar speed display signs can remain effective over a …

Impact Of Image Resolution On Pavement Distress Detection Using Picucha Methodology, Reus Salini, Bugao Xu, Mena I. Souliman

Civil Engineering Faculty Publications and Presentations

An accurate and regular survey of the road surface distresses is a key factor for pavement rehabilitation design and management, allowing public managers to maximize the value of the continuously limited budgets for road improvements and maintenance. Manual pavement distress surveys are labor-intensive, expensive and unsafe for highly-trafficked highways. Over the years, automated surveys using various hardware devices have been developed and improved for pavement field data collection to solve the problems associated with manual surveys. However, the reliable distress detection software and the data analysis remain challenging. This study focused on the analysis of a newly-developed pavement distress classification …

Phosphorus Adsorption Through Engineered Biochars Produced From Local Waste Products, Peter Ogonek

Honors Theses

Phosphorus contained in agricultural runoff is a major anthropogenic contributor to harmful algal blooms (HABs). Biochars are carbon-based materials produced from the pyrolysis of waste biomass that have the potential to amend soils and remediate inorganic and organic contaminants from water. Engineered biochars tailored to adsorb phosphorus from water could reduce the availability of the nutrient in agricultural runoff, reducing the size and frequency of HABs. This study observed the phosphorus adsorption properties of engineered biochars produced from two source materials, oak sawdust and cornstalk residue, and being unmodified, acid-rinsed, or loaded with magnesium prior to pyrolysis, creating acid-rinsed, unmodified, …