Civil and Environmental Engineering Commons^™

Enhancing Productivity By Using Building Information Modeling Applications In Pipeline Construction Projects, Harsha Vardhan Reddy Guduru Penusila

Civil Engineering Theses - Archive

Building Information Modeling (BIM) is a technology and associated set of processes to produce, communicate, and analyze building models. BIM is a new concept within the construction industry. The objective of this thesis is to utilize BIM in pipeline construction projects as one of the pioneering steps to reduce rework and delays due to unforeseen conditions. This thesis presents evaluation and recommendations to help pipeline construction industry’s transition from traditional two-dimensional drawings to a BIM management process aiding owners and contractors to develop and implement a basic form of BIM technique to manage their projects. This thesis uses two pipeline …

Enhanced Seismic Performance Of Special Truss Moment Frames And Staggered Truss Framing System For Seismically Active Areas, Sanputt Simasathien

Civil Engineering Dissertations - Archive

Due to their ability to achieve large column-free floor spaces, special truss moment frames (STMFs) and staggered truss frames (STFs) are unique valuable options for structural engineers. However, although STMFs and STFs offer a wide range of structural, architectural, and economical benefits, limited research data is available on the seismic performance of these systems. STMF system is a relatively new type of steel framing system for use in high seismic areas. STMFs dissipate earthquake energy through ductile special segments located near the mid-span of the truss girders, while the other members outside the special segment, including truss members, columns, and …

Investigation Of Strength-Enhancement Mechanism And Size Effect On Ultimate Shear Strength Of Steel Fiber-Reinforced Concrete (Sfrc) Slender Beams, Mohammad Reza Zarrinpour

Civil Engineering Dissertations - Archive

This research study consists of two separate phases. In the first phase, an experimental study was conducted to identify the shear-enhancement and failure mechanisms behind the ultimate shear strength of steel fiber-reinforced concrete (SFRC) slender beams by utilizing the full field deformation measuring capability of digital image correlation (DIC) technology. A total of 12 large-scale simply supported SFRC and RC beams with a range of heights including 12 in. (305 mm), 18 in. (457 mm), 24 in. (610 mm), 36 in. (915 mm), and 48 in. (1220 mm) were tested under monotonic point load. The greater shear strength in SFRC …

Using Ceramic Waste Powder In Producing Self-Compacting Concrete, Sama Tarek Sayed Taha

Civil and Environmental Theses

Self-compacted (i.e. consolidated) concrete (SCC) is a special type of concrete that represents a great advancement towards a better quality of sustainable concrete. This unique type is known for its high flowability and superior levels of surface finish without tendency for segregation. The inherited distinct features can be achieved by the addition of high powder content as filler (i.e. size < 0. 125 mm) in the concrete mixture. The filler enhances the rheological properties of the SCC mixture without the need for using higher cement contents and hence, reduces the cost and heat of hydration. Lately, various regulating measures were imposed by governments and environmental organizations all over the world to seize the negative impact on the ecosystem resulting from huge amounts of solid waste materials being dumped in landfills causing major environmental problems. As a result, the utilization of alternative industrial waste constituents in construction materials has been the research focus for many years to evaluate their competence in SCC industry, and their feasibility as filler materials. In this study, ceramic waste powder (CWP) produced during the polishing process of ceramic tiles will be particularly investigated. Fresh and hardened tests are conducted to evaluate the influence of CWP on the rheological and mechanical properties of SCC mixtures. It was concluded that CWP can be used to successfully produce SCC mixtures with improved fresh and hardened properties. The inclusion of CWP up to 200 kg/m³ in SCC mixtures resulted in denser compacted mixtures with low permeability characteristics and high strength values. In addition to enhanced segregation resistance with good deformability and passing abilities for the mixtures under their own weight. The successful completion of …

Multimodal Transportation Planning Curriculum For Urban Planning Programs, Kristine M. Williams, Tia Claridge, Alexandria Carroll

TREC Final Reports

Integrated multimodal transportation and land use planning is critical to advancing mode choice, public health and safety, and livability objectives. Communities across the U.S. are seeking to redefine their planning process accordingly. In response, university graduate urban planning and engineering programs are beginning to address multimodal planning and sustainable transportation, but most do not yet offer a robust curriculum on these topics. To help address this need, the University of South Florida (USF), Center for Urban Transportation Research (CUTR) developed a curriculum for a course on multimodal transportation planning and its role in advancing livability and related objectives. The course …

Advanced Gis: Smart Transportation, Christopher Bone, Ken Kato, Jacob Bartruff, Marc Schlossberg

TREC Final Reports

As sensors have become cheaper and more common, they have found an increasingly important role in transportation. However, curriculum to prepare students who will be working with these technologies as developers and planners has not developed at the same rate. The goal of this project was to develop a college course focused around sensors and smart transportation to be offered to undergrad and graduate students at the University of Oregon. The class focused on the practical application and the theoretical consequences of these developments. The class was offered in the spring term of 2015 to a group of undergraduate and …

Design Of A Folding V-Scraper With Roller For Orchard Applications, Chase Ulrich

BioResource and Agricultural Engineering

This senior project discusses the design of a folding 15 ft. wide leveler for orchard use. This design utilized a category 2 three-point hitch to connect the implement to a tractor. The folding mechanism uses the tractors hydraulic system to actuate the folding movement using hydraulic cylinders. The blades, when wings in operational position, are rigid with one another after some assembly. When the implement is folded the width is reduced to nine feet.

Concise Handbook For Temporary Traffic Control - Construction, Maintenance, And Utility Operations, Indiana Ltap, Ohio Department Of Transportation

Indiana Local Technical Assistance Program (LTAP) Publications

This handbook gives the basic principles and provides examples for the design, application, installation, and maintenance of the various types of traffic control devices used in temporary traffic control or for incident management. Traffic control in roundabouts has been included in this version. The guidelines presented are in accordance with the standards provided within the Indiana Manual for Uniform Traffic Control Devices (IMUTCD). This handbook is based upon one created by the Ohio Department of Transportation, Guidelines for Traffic Control in Work Zones. Indiana LTAP expresses thanks to ODOT for their permission to reprint this material.

Drinking Water: Hard Water (Calcium And Magnesium), Sharon O. Skipton, Bruce I. Dvorak

Department of Civil and Environmental Engineering: Faculty Publications

Hard water isn’t a health hazard but can be a nuisance within the home. Learn how to test water, interpret the results, and choose a treatment.

Water described as “hard” contains high amounts of dissolved calcium and magnesium. Hard water is not a health risk but can be a nuisance because of mineral buildup on plumbing fixtures and poor soap and/or detergent performance.

Water is a good solvent and picks up impurities easily. As water moves through soil and rock, it dissolves very small amounts of minerals and holds them in solution. Dissolved calcium and magnesium are the two most …

Drinking Water Treatment: Salt-Free Water “Softener” Options, Bruce I. Dvorak

Department of Civil and Environmental Engineering: Faculty Publications

New no-salt technologies may be effective in treating hard water, but consumers should carefully investigate product claims prior to buying a specific treatment device.

Hard water is not a health risk, but many Nebraska consumers find hard water to be a nuisance because of mineral buildup on plumbing fixtures, including water heaters; unsightly film on glass and crystal wares; and poor soap and/or detergent performance. Water described as “hard” contains high amounts of dissolved calcium and magnesium, which are positively charged contaminants called cations.

Water hardness often is expressed as grains of hardness per gallon of water (gpg) or milligrams …

Micro-Ct Inspection Of Impact Damage In Carbon/Epoxy Rods, Lindsey Charlene Cahoon

Theses and Dissertations

Various configurations of unidirectional carbon/epoxy composite rods were impacted radially, inspected using micro-CT scanning equipment, and tested in axial compression to measure the residual strength after impact. This data was used to correlate the relationship between impact energy, residual strength, and the peak crack area and total crack volume along the length of the specimens. These specimens represent local members of open three-dimensional composite lattice structures (e.g., based on isogrid or IsoTruss® geometries) that are continuously fabricated using advanced three-dimensional braiding techniques. The specimens were radially impacted with 2.5 J (1.9 ft-lbs), 5.0 J (3.7 ft-lbs), 7.5 J (5.6 ft-lbs), …

Optimizing Dam Siting In The Paru River In Brazil Using A Multi-Objective Approach, Henrique De Paula

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

How should a decision-maker choose which hydropower plant to build in a given river? Hydropower plant expansion is a task that involves several stakeholders, objectives, and resources. It requires that decision-makers use not only experience and previous knowledge to come up with their final decision, but also the use of tools to help them to decide, as well as to support their choices. The present project developed a computation model to optimize the choice of hydropower plants that can be built within a given river, considering three different objectives - energy generation, flooded surface area and river connectivity. The input …

Werc Task #1 - Efficiency And Particulate Matter Emissions Testing Of Wood Burning Heating Units, Jonathan A. Shumaker

Chemical Engineering Undergraduate Honors Theses

A design of a method for calculating the efficiency and particulate matter emission rates was developed for use on wood stoves. The project was completed for the WERC competition which is an international design contest. The prevalence of wood burning as a form of heating, current EPA regulations, and current market conditions were major factors in forming the necessity of this testing method. Design was not limited to outlining the design specifications, the apparatus was built and run. Optimization of the method continued until completion of the project. If the method would continue to be improved then it would be …

Validation Of An Internal Camera Based Volume Determination System For Triaxial Testing, Leah D. Miramontes

Civil Engineering Undergraduate Honors Theses

Accurate strain and volume measurements are critical to phase relationships and strength determination for saturated and unsaturated soils. In recent years, laboratory-based photographic techniques of monitoring soil specimens have become more common. These techniques have been used to reconstruct 3D models and to determine strain and volumetric changes of triaxial specimens. A new technique that utilized digital photographs of the soil specimen, captured from within a triaxial testing cell, was utilized. Photographs were processed using photogrammetry software to reconstruct 3D models of the soil specimens. By placing camera equipment within the cell, the technique eliminated the need to account for …

Assessing Toxicity Of Endocrine Disrupting Compounds In Wastewater For Water Reuse, Ryan Duchanois

Civil Engineering Undergraduate Honors Theses

Reclaiming treated wastewater for potable water use may be necessary to supplement drinking water sources in water scarce regions. However, Snyder et al. (2003) indicates that endocrine disrupting compounds (EDCs) are commonly found in wastewater effluents and natural waters around the world. These compounds with endocrine disrupting potential are typically found in personal care products, pharmaceuticals, and pesticides. Furthermore, according to Lemanik et al. (2007), typical wastewater treatment plants are not designed to remove EDCs.

For the purpose of water reuse, benchmarking wastewater treatment for endocrine disrupting compounds (EDCs) is necessary. The cytotoxicities of five EDCs (namely, amoxicillin, acetaminophen, triclosan, …

Towards A Fast Reconstruction Paradigm For Urban Environments In Developing Regions Affected By Natural Disasters, Christopher Maestri

Civil Engineering Undergraduate Honors Theses

Natural disasters in developing regions often displace people from their homes, into temporary shelters. These temporary shelters often consist of single-story pre-assembled tents designed to provide short-term aid for individual families. Unfortunately, single-story temporary shelters are not sufficient for accommodating large displaced populations in urban settings due to issues of land overcrowding and disruption to utilities providing water sanitation and hygiene (WASH) services (along with many other issues).

This study investigates the feasibility of implementing a multi-story steel structure, constructed with multi-use structural members and special end connectors, into future relief efforts. A multi-use structural member is an element whose …

Analysis Of Bolted Beam-Column Connections With Multiple Bolts Per Row And Column Web Stiffeners, Benjamin C. Sutherland

Civil Engineering Undergraduate Honors Theses

Bolted beam-column connections are a common moment connection used in the design of steel buildings. Existing design guides include design parameters for bolt configurations having one bolt on either side of the beam web for each row of bolts. There is potential for increasing connection strength by adding additional bolts on the outside of these rows. This addition could be useful in retrofit scenarios, or even in the design of new structures. In this research, finite element analysis is used to analyze various beam-column connections and t-stub connections. The modeling methods, research process, and conclusions are explained in the thesis …

Measuring Relative Humidity In Concrete Pavements As A Method To Assess Asr Mitigation Measures, Remington G. Reed

Civil Engineering Undergraduate Honors Theses

Alkali-silica reaction (ASR) in concrete is partly facilitated by available moisture within the concrete. In order to better understand this facilitation and to develop processes for ASR mitigation methods, it is necessary to establish a means of monitoring internal relative humidity (RH) within the concrete. Current procedures for measuring RH are time consuming; requiring several hours of equilibration time and specific external conditions to yield accurate results. In order to better understand RH monitoring, laboratory tests were conducted using commercially available RH probes and different controlled environments. Probes were carefully monitored and calibrated in controlled environments, and laboratory tests on …

Size Scale Effects On Linear Weir Hydraulics, Kedric W. Curtis

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Linear weirs are a type of hydraulic structure that have been used for centuries with many different applications. One of the characteristics of weirs that is particularly useful is the head-discharge relationship where the discharge over the weir is directly related to the upstream water depth above the crest. In general, the head-discharge relationship for a weir is determined experimentally using geometrically similar models. Due to space, time, money, and discharge capacity limitations at water laboratories, creating full scale models is not always a feasible option when determining head-discharge relationships for weirs, resulting in the use of smaller scale models. …

Anaerobic Hydrogen And Methane Production From Dairy Processing Waste: Experiment And Modeling, Jianming Zhong

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Dairy processing waste (DPW) is the waste produced from manufacturing dairy products: cheese, yogurt, ice cream, milk, butter, etc. DPW is high in chemical oxygen demand (COD) due to its lactose, fat and protein content, and therefore needs to be appropriately treated. An investigation was conducted to produce energy (hydrogen and methane) from DPW by anaerobic digestion. This project developed an effective engineering method for stable methane production from DPW without adding pH control chemicals. This study also explored the optimal operational condition for hydrogen production from DPW. We further built a mathematical model to help us monitor and predict …

Analyzing Irrigation District Water Productivity By Benchmarking Current Operations Using Remote Sensing And Simulation Of Alternative Water Delivery Scenarios, Jonna D. Van Opstal

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The competition for fresh water is vastly increasing particularly in semi-arid areas. Agricultural irrigation areas are urged to decrease their water use, being the largest consumer of fresh water in these areas. Improvements in irrigation management aim at increasing crop production whilst maintaining or decreasing water use. The analysis of water productivity at the irrigation district scale is challenging due to spatial heterogeneity between fields and temporal variability between growing seasons.

This dissertation makes use of satellite-based remote sensing imagery and an irrigation system simulation model to determine the water management at different spatial scales from field scale to the …

Urban Agriculture And Small Farm Irrigation: Case Studies From Cache Valley, Utah, Tyler Pratt

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The socioeconomic landscape of water in Utah is rapidly changing due to population growth, conversion of agricultural land to urban development, and increasing awareness of future water scarcity. The Utah Division of Water Resources (DWRe) forecasts that the currently developed water supplies will not be enough to provide for Utah’s future population, and is pursuing conservation and new development to be able to meet the state’s needs.

Along with the urban growth Utah is experiencing a quickly growing sector of urban and small farm agriculture, but knowledge of water use and current practices in this area is limited. Further research …

A Risk-Based Assessment Of Agricultural Water Scarcity Under Climate Change In A Semi-Arid And Snowmelt-Dominated River Basin, Hossam Moursi

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Water shortage is a crucial concern in the semi-arid areas that have relatively low precipitation. Given the current situation in semi-arid areas where the water supply
already does not meet the water demand, climate change is one of the important factors that is expected to exacerbate the water shortage problem and make the situation even worse in the future. There are many indicators that prove climate change is happening, like the increasing land temperature, sea level rise and decreasing snow cover. Therefore, studying climate change impacts is a vital issue, especially its impacts on water resources systems.

In this research, …

Lateral Resistance Of H-Piles And Square Piles Behind An Mse Wall With Ribbed Strip And Welded Wire Reinforcements, Andrew I. Luna

Theses and Dissertations

Bridges often use pile foundations behind MSE walls to help resist lateral loading from seismic and thermal expansion and contraction loads. Overdesign of pile spacing and sizes occur owing to a lack of design code guidance for piles behind an MSE wall. However, space constraints necessitate the installation of piles near the wall. Full scale lateral load tests were conducted on piles behind an MSE wall. This study involves the testing of four HP12X74 H-piles and four HSS12X12X5/16 square piles. The H-piles were tested with ribbed strip soil reinforcement at a wall height of 15 feet, and the square piles …

Computing Research In Academia: Classifications, Keywords, Perceptions, And Connections, Sung Han Kim

Theses and Dissertations

The Association for Computing Machinery (ACM) recognizes five computing disciplines: Computer Science (CS), Computer Engineering (CE), Information Technology (IT), Information Systems (IS), and Software Engineering (SE). Founded in 1947 the ACM is the world's largest society for computing educators, researchers, and professionals. While Computer Science has been a degree program since 1962, the other four are relatively new. This research focuses on understanding the graduate research in four of the five ACM disciplines (CS, CE, IT, and IS) using a large body of thesis and dissertation metadata. SE is not found in the metadata and graduate work in SE is …

Roadway Safety Analysis Methodology, Samuel Thomas Mineer

Theses and Dissertations

The Utah Department of Transportation (UDOT) Traffic and Safety Division continues to advance the safety of the state roadway network through network screening and decision making tools. In an effort to aid UDOT in meeting this goal, the Department of Civil and Environmental Engineering at Brigham Young University (BYU) has worked with the Statistics Department in developing analysis tools for highway safety, specifically the Utah Crash Prediction Model (UCPM) and the Utah Crash Severity Model (UCSM). Additional tools and methodologies, such as the "Hot Spot Identification and Analysis," have been created to summarize the roadway characteristics, crash data, and possible …

Implementation Of Bim In The Municipal Plan Review Process, Liz Shantalle Ricardo Belliard

Theses and Dissertations

Obtaining a building permit is an important step for any construction project. Whether it is for a new construction or a remodel job, the process involves a plan review performed by building officials. The purpose of this research was to explore ways in which Building Information Modeling (BIM) could be used to aid code officials during the plan review process. The objectives of the study were to determine if the level of detail in BIM was complete enough to allow a plan review to be perform accurately, to identify the extent to which architects are comfortable with using their models …

Removal Of High And Low Levels Of Ammonium From Industrial Wastewaters, Gregory Bock

UNLV Theses, Dissertations, Professional Papers, and Capstones

Over 2×10^11 kilograms of ammonia are produced globally per year by the Haber-Bosch process which combines molecular hydrogen and nitrogen to synthesize ammonia. Most is used for fertilizer and agriculture while the remaining is used for other purposes including industrial processes and explosives. Explosives used in the mining industry are commonly ammonium nitrate (����4����3)-based. Excess ammonia and nitrate which can be dissolve into mine runoff water during blasting. Ammonia in mine and mineral wastewater can range from 20-110 mg/L. Ammonia is also present in several types of industrial wastewater such as caustic soda solutions used in the oil re-refining industry …

Solar Energy Storage In Molten Salt Shell Structures, Nathan David Tyrrell Loyd

UNLV Theses, Dissertations, Professional Papers, and Capstones

Molten salts (MS) in the 580°C range could be used to store excess energy from solar power stations and possibly from nuclear or coal. The energy can be stored up to a week in large containers at elevated temperature to generate eight hours of electricity to be used at night or during peak demand hours. This helps to reduce the fluctuation experienced at thermal solar power stations due to weather conditions. Our research supported by Office of Naval Research (ONR), presents a survey of salts to be used in molten salt technology and the design of large steel and hybrid …

Ozonation In Water Reuse: Formation And Mitigation Of N-~Nitrosodimethylamine, Erica J. Marti

UNLV Theses, Dissertations, Professional Papers, and Capstones

Formation of N-nitrosodimethylamine (NDMA) is a substantial concern for drinking water and water reuse. NDMA, a probable human carcinogen, is formed when water is disinfected with chloramines and ozone. This research focused on three issues regarding NDMA formation and mitigation. The first issue involved understanding the compounds (i.e., precursors) present in water and wastewater that react with ozone to form NDMA. Model precursors were identified and molar yields for NDMA formation were determined. The model precursors form high amounts of NDMA with ozone, but form very little NDMA with chloramines, which means there are two distinct groups of NDMA precursors: …