Civil and Environmental Engineering Commons^™

Field Emissions Of (Hydro)Chlorofluorocarbons And Methane From A California Landfill, Alexander H. Sohn

Master's Theses

A comprehensive field investigation was conducted at Potrero Hills Landfill (PHL) located in Suisun City, California to quantify emissions of twelve (hydro)chlorofluorocarbons (i.e. F-gases). The specific target constituents for this study included CFC-11, CFC-12, CFC-113, CFC-114, HCFC-21, HCFC-22, HCFC-141b, HCFC-142b, HCFC-151a, HFC-134a, HFC-152a, and HFC-245fa. The majority of the F-gas emission studies have been conducted outside of the United States and very limited field landfill emission data are available in the United States. Because of historical usage of blowing agents in insulation foams including CFC-11, HCFC-142b, HFC-134a, and HFC-245fa, models reported in literature predicted high F-gas emissions from a landfill …

Outsourcing Of Building Information Modeling (Bim) Among General Contractors In The United States, James W. Fountain

Honors Theses

Building Information Modeling (BIM) is a process used by AEC industry members that simulates a construction project in a multidimensional digital model and provides multitudes of project benefits from inception to occupancy. However, a variety of barriers impede a holistic BIM implementation. Because of these barriers, some general contractors are choosing to outsource the creation and/or utilization of BIM models to specialized Information Technology (IT) firms instead of performing these processes in-house. Since little literature currently exists for BIM outsourcing, this online survey-based study aimed to identify BIM outsourcing patterns among the general contractors across the US and the perceived …

Investigating And Improving Bridge Management System Methodologies Under Uncertainty, Minwoo Chang

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This dissertation presents a novel procedure to select explanatory variables, without the influence of human bias, for deterioration model development using National Bridge Inventory (NBI) data. Using NBI information, including geometric data and climate information, candidate explanatory variables can be converted into normalized numeric values and analyzed prior to the development of deterministic or stochastic deterioration models. The prevailing approach for explanatory variable selection is to use expert opinion solicited from experienced engineers. This may introduce human influenced biases into the deterioration modeling process. A framework using Least Absolute Shrinkage and Selection Operator (LASSO) penalized regression and covariance analysis are …

Spatial Distribution Of Antibiotic Resistance In Soils Receiving Beef Feedlot Runoff, Scott Speicher

Department of Environmental Engineering: Theses and Other Student Research

A study was conducted to provide new insight on the potential contribution to antibiotic resistance from the land application of beef feedlot runoff to soil. This study reports the distribution and quantity of antibiotic resistant bacteria (ARBs), fecal indicator bacteria (FIB), and antibiotic resistance genes (ARGs) in soil from (i) a field receiving long-term application of beef feedlot runoff holding pond effluent and (ii) a cool-season pasture with no history of supplemental manure application.

Soil samples were collected June 2015 at the U.S. Meat Animal Research Center near Clay Center, Nebraska. A response surface sampling design (RSSD) model based on …

Safety Performance Prediction Of Large-Truck Drivers In The Transportation Industry, Emily Moneka Francis Xavier

Graduate Theses and Dissertations

The trucking industry and truck drivers play a key role in the United States commercial transportation sector. Accidents involving large trucks is one such big event that can cause huge problems to the driver, company, customer and other road users causing property damage and loss of life. The objective of this research is to concentrate on an individual transportation company and use their historical data to build models based on statistical and machine learning methods to predict accidents. The focus is to build models that has high accuracy and correctly predicts an accident. Logistic regression and penalized logistic regression models …

Dynamic And Static Behavior Of Hollow-Core Frp-Concrete-Steel And Reinforced Concrete Bridge Columns Under Vehicle Collision, Omar I. Abdelkarim, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents the difference in behavior between hollow-core fiber reinforced polymer-concrete-steel (HC-FCS) columns and conventional reinforced concrete (RC) columns under vehicle collision in terms of dynamic and static forces. The HC-FCS column consisted of an outer FRP tube, an inner steel tube, and a concrete shell sandwiched between the two tubes. The steel tube was hollow inside and embedded into the concrete footing with a length of 1.5 times the tube diameter while the FRP tube stopped at the top of footing. The RC column had a solid cross-section. The study was conducted through extensive finite element impact analyses …

Smart Rock Technology For Real-Time Monitoring Of Bridge Scour And Riprap Effectiveness -- Design Guidelines And Visualization Tools, Genda Chen, Yan Tang, Yizheng Chen, Zhaochao Li, Chuanrui Guo, Liang Fan, Yi Bao, Xiuyan Hu, Matthew Klegseth

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study aims to further develop and demonstrate the recently-proposed smart rock technology for scour depth and protection effectiveness monitoring. A smart rock is one or two stacked magnets encased in a concrete sphere with a specially-designed rotational mechanism. Design guidelines, rotational mechanisms, remote measurement tools and localization algorithms of smart rocks were developed and validated at three bridge sites. The effect of steel reinforcement in bridge piers/deck on the orientation of gravity-controlled magnets was negligible. The localization accuracy with a single smart rock met a general requirement of less than 0.5 m in engineering applications. The spherical smart rock …

Characterization And Delineation Of Karst Geohazards Along Rm652 Using Electrical Resistivity Tomography, Culberson County, Texas, Adam F. Majzoub

Electronic Theses and Dissertations

The Delaware Basin of West Texas and southeastern New Mexico is the major western subdivision of the Permian Basin and a northern extension of the Chihuahuan Desert. The major evaporite unit within the Delaware Basin is the Castile Formation, which consists of gypsum/anhydrite and is highly susceptible to dissolution and karsting. Manifestations of karst within the Castile outcrop are abundant and include sinkholes, subsidence features and caves, both epigene and hypogene in origin.

Land reconnaissance surveys conducted during the summer of 2015 documented abundant karst landforms in close proximity to a major thoroughfare, RM 652, in Culberson County, Texas. 2D …

Geotechnical Properties Of The Travis Peak (Hosston) Formation In East Texas: A Compressive And Tensile Strength Analysis Using Regression Analysis., Pawan Kakarla

Electronic Theses and Dissertations

The estimation of rock mass strength is a key parameter in geotechnical engineering which is used in the design of geotechnical structures like tunnels, dams and slopes. Geotechnical engineering is the branch of civil engineering which works on the principles of soil and rock mechanics to evaluate subsurface conditions, stability of slopes, foundations of structures and construction of earthworks. The main focus of this study was to calculate the strength of Lower Cretaceous Travis Peak Formation rocks of East Texas and to check the accuracy by comparing it with Regression analysis. The parameters which were used were the Uniaxial Compression …

Factors Affecting Social Sustainability In Highway Projects In Missouri, Mohamed Abdel-Raheem, Charles Ramsbottom

Civil Engineering Faculty Publications

Sustainability focuses on the interaction between a given project and the social, environmental, and the economic dimensions of the system enclosing it. The majority of the studies conducted focused mostly on the environmental aspects of sustainability rather than the economic ones, while very few studies discussed the social dimension. Social sustainability promotes the concepts of respect, awareness, diversity, vitality, and responsibility toward the workforce and the society by keeping them healthy and safe from harm during the different phases of a project. Highway projects are one of the most critical infrastructure projects in the construction industry. This is due to …

Bim Innovation Capability Programme: An Irish Bim Study, Barry Mcauley, Alan Hore, Roger West

Articles

In 2011 the Royal Institute of Architects Ireland (RIAI) conducted a survey which found that BIM adoption within Ireland was quite low at 16%. Over the last five years these figures have risen significantly, with the 2016 Irish Digital Transition Survey reporting that 76% of respondents possess confidence in their organisation’s BIM skills and knowledge. This represents a significant shift of BIM adoption in Ireland over the last five years.

The BIM Innovation Capability Programme (BICP) Irish BIM study, builds on the findings from the BICP Global BIM Study by providing an in depth review of BIM in Ireland with …

Shear Wave Velocity And Its Anisotropy Of Polymer Modified High-Volume Class-F Fly Ash-Kaolinite Mixtures, X. Kang, B. Bate

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated the effects of polymers on the small-strain stiffness behavior of high-volume Class-F fly ash-kaolinite mixtures. The shear wave velocity (Vs) and its anisotropy of organically modified fly ash-kaolinite mixtures were evaluated using a self-developed floating wall type consolidometer bender element (BE) testing system. Both synthetic polymers [polyethylene oxide (PEO)] and biopolymers (xanthan gum and chitosan) were used to modify the stiffness of fly ash-kaolinite mixtures. Shear waves generated and received by bender elements were measured to quantify the small-strain stiffness of the organically modified fly ash-kaolinite mixtures in three orthogonal directions, i.e., vh, hv, and hh. The …

Dermal Uptake Directly From Air Under Transient Conditions: Advances In Modeling And Comparisons With Experimental Results For Human Subjects, G. C. Morrison, C. J. Weschler, G. Bekö

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

To better understand the dermal exposure pathway, we enhance an existing mechanistic model of transdermal uptake by including skin surface lipids (SSL) and consider the impact of clothing. Addition of SSL increases the overall resistance to uptake of SVOCs from air but also allows for rapid transfer of SVOCs to sinks like clothing or clean air. We test the model by simulating di-ethyl phthalate (DEP) and di-n-butyl phthalate (DnBP) exposures of six bare-skinned (Weschler et al. 2015, Environ. Health Perspect., 123, 928) and one clothed participant (Morrison et al. 2016, J. Expo. Sci. Environ. Epidemiol., 26, 113). The model predicts …

Carpenters Apprenticeship Internship: Student And Industry Perspectives, Chris Falco

Construction Management

The Carpenters Apprenticeship Internship program is designed to provide students the opportunity to work as a construction laborer and get hands-on work experience. The goal of this study is to address the perceived benefits of the Carpenters Apprenticeship Internship with respect to the students, the industry members, and the union. In looking at the benefits this opportunity presents, any value that is aligned among the parties involved will be highlighted to convey the mutual advantages. Lastly, the demand among students for experience such as this will be assessed to see what the perceived value of labor experience is among students …

Construction Of A Chicken Coop For Use By An Early Education Facility, Luke Cypress

Construction Management

There is a demand in the early education field for methods of exposing early learners to where our food comes from and how it’s produced. An excellent source of this exposure is commonly utilized in an onsite chicken-coop. These coops are in essence working farms, producing eggs and in some cases meat. While coops are not prohibitively expensive they often fall outside the scope of normal operating or educational budgets and can be difficult to fund. The purpose of this project was to identify a school that could use and benefit from a coop at no cost to the school. …

Feasibility Study Of Using Recyclable Polyethylene (Pet) Materials As Coarse Aggregate For Concrete Mixtures, Philip M. Angelo

Construction Management

The feasibility of using recyclable household plastics, specifically those made of polyethylene, commonly used in water and soda bottles, as a replacement for concrete coarse aggregate, was assessed. A method was developed for cutting polyethylene materials into fibrous strips. These strips were then used as a replacement for the rock coarse aggregate in batches of concrete. Standard 6” x 12” test cylinders were made using the concrete mixture and subject to destructive compressive testing in order to yield the compressive strength of the concrete mix 7, 14, 21, and 28 days after pouring. Three mixtures were tested, one control with …

A Case Study On Achieving 100% Customer Satisfactory Homes In Production Home Building, Garrett Whitlock

Construction Management

No abstract provided.

Evaluation Of A Supervisor Training Program For Odot’S Ecodrive Program, Donald M. Truxillo, John Macarthur, Leslie B. Hammer, Talya N. Bauer

TREC Final Reports

Eco-driving consists of using energy-efficient approaches to driving aimed at reducing fuel consumption and, ultimately, CO2 emissions. A previous study found that an EcoDrive informational campaign was effective at increasing the use of eco-driving behaviors, but only when employees perceived that their supervisor supported the program and when they were personally motivated to perform the eco-driving behaviors. In order to build upon the findings of our previous study, the present study focused on increasing the use of eco-driving behaviors through an informational eco-driving campaign combined with supervisor training to support the use of eco-driving practices.

In this study we collected …

Ncer Assistance Agreement Annual Progress Report For Grant #83582401 - Assessment Of Stormwater Harvesting Via Manage Aquifer Recharge (Mar) To Develop New Water Supplies In The Arid West: The Salt Lake Valley Example, Ryan Dupont, Joan E. Mclean, Richard C. Peralta, Sarah E. Null, Douglas B. Jackson-Smith

Civil and Environmental Engineering Faculty Publications

The aims of the original proposed project remain the same, that is, to test the hypothesis that Managed Aquifer Recharge (MAR) for stormwater harvesting is a technically feasible, socially and environmentally acceptable, economically viable, and permittable option for developing new water supplies for arid Western urban ecosystems experiencing increasing population, and climate change pressures on existing water resources. The project is being carried out via three distinct but integrated components that include: 1) Monitoring of existing distributed Managed Aquifer Recharge (MAR) harvesting schemes involving a growing number of demonstration Green Infrastructure (GI) test sites; 2) Integrated stormwater/vadose zone/groundwater/ ecosystem services …

Cee Dept. Announces Water Cluster Hire | College Of Engineering, Usu College Of Engineering

College of Engineering News

The Department of Civil and Environmental Engineering (CEE) seeks talented applicants for a cluster hire of three tenure eligible positions at the assistant or associate level whose research will yield more holistic approaches to solving water problems in natural, built, and/or agricultural environments. We seek bright, creative and interdisciplinary researchers who can increase Utah State University’s (USU) capacity to lead and develop the next generation of resilient solutions to water problems in these linked environments. We especially seek applicants with the passion and ability to work with others from a broad range of disciplines to advance fundamentally new and innovative …

Experimental Investigation Of Cfrp Wrapped Square Non-Ductile Reinforced Concrete Columns, Hayder Lateef Al-Khafaji

Dissertations and Theses

The use of fiber-reinforced polymers (FRP) for retrofitting or strengthening deficient concrete columns noticeably increased in the past few decades. Plenty of research has been conducted on the behavior of FRP-strengthened circular concrete columns, but far less research has dealt with non-circular columns. In the current study, the focus was to investigate the behavior of square columns with low to medium grade concrete and low steel reinforcement that were strengthened using carbon fiber reinforced polymer (CFRP) wrap. In the experimental portion of this investigation, twelve short square reinforced concrete columns (5" x 5" in cross section and 12" high) were …

An Assessment Of Post-Encroachment Times For Bicycle-Vehicle Interactions Observed In The Field, A Driving Simulator, And In Traffic Simulation Models, Ali Razmpa

Dissertations and Theses

Most safety analysis is conducted using crash data. Surrogate safety measures, such as various time-based measures of time-to-collision can be related to crash potential and used to gain insight into the frequency and severity of crashes at a specific location. One of the most common and acknowledged measures is post-encroachment time (PET) which defines the time between vehicles occupying a conflicting space. While commonly used in studies of motor vehicle interactions, studies of PET for bicycle-vehicle interactions are few. In this research, the PET of bicycle-vehicle interactions measured in the field, a driving simulator, and in a micro-simulation are compared. …

Determination Of Aqueous Surfactant Solution Surface Tensions With A Surface Tensiometer, Remelisa Esteves, Birce Dikici Ph.D, Matthew Lehman, Qayyum Mazumder, Nonso Onukwuba

Beyond: Undergraduate Research Journal

Surfactant solutions are applicable to engineering systems for cooling equipment for electronics. Surfactants can be added to water to improve heat transfer. An application of using aqueous surfactant solutions can be through microchannel heat sink. Although it is ideal to redesign these systems to reduce heat, it is a costly method. Surfactant solutions at optimal solution concentration can be able to transfer heat quickly and effectively with minimum expense. The surface tension of surfactant solutions is an important parameter for boiling heat transfer and must be taken into consideration. The purpose of this research is to measure surface tension of …

Determination Of Surfactant Solution Viscosities With A Rotational Viscometer, Remelisa Esteves, Nonso Onukwuba, Birce Dikici Ph.D

Beyond: Undergraduate Research Journal

Aqueous surfactant solutions are used in engineering systems for improving boiling heat transfer. The purpose of this research is to determine the viscosities of surfactant solutions and to investigate the effect of composition on viscosity. The results obtained can possibly be used as reference for further study in the effects of surfactant solution viscosities on nucleate boiling. A rotational viscometer was used to determine the viscosities of three surfactant solutions – SLS, EH-14, and SA-9 – of various compositions at room temperature. It was discovered that the viscosities of SLS, EH-14, and SA-9 had a nearly consistent pattern as their …

Species Distribution Model For Swift Fox In Nebraska, Lucia Corral Hurtado

Nebraska Department of Transportation: Research Reports

No abstract provided.

High Performance Computing Applied To Structural Analysis Of Concrete Structures, Jose A. Mena Ortiz

Civil Engineering ETDs

Continuum mechanics models are the main tool in structural analysis. Due to

their continuity assumption, some of them do not predict accurately the behavior of

concrete structures. While these models are widely used by design engineers, many

are flawed for fundamental reasons.

The State-Based Peridynamic Lattice Model (SPLM) is presented in this thesis

as a viable alternative to continuum models. The SPLM is shown to have a simple

formulation that allows the engineer to fully understand the underlying theory. The

elastic, plastic and damage SPLM models are presented. Moreover, SPLM is shown

to be capable of modelling essential mechanisms in …

Quantifying An Aquifer Nitrate Budget And Future Nitrate Discharge Using Field Data From Streambeds And Well Nests, Troy E. Gilmore, David P. Genereux, Kathleen M. Farrell, Helena Mitasova

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Novel groundwater sampling (age, flux, and nitrate) carried out beneath a streambed and in wells was used to estimate (1) the current rate of change of nitrate storage, dS_NO3 /dt, in a contaminated unconfined aquifer, and (2) future [NO₃^–]_FWM (the flow-weighted mean nitrate concentration in groundwater discharge) and f_NO3 (the nitrate flux from aquifer to stream). Estimates of dS_NO3 /dt suggested that at the time of sampling (2013) the nitrate storage in the aquifer was decreasing at an annual rate (mean = –9 mmol/m²yr) equal …

Relaxation In Bolted Assemblies, Samuel Augustus Moeller

Theses and Dissertations

The purposes of this investigation were to (a) extend previously developed elastic spring models for bolt assemblies to include simulating creep loss in the bolt and the threads and (b) to present an approach in which appropriate spring stiffness in the model are determined rationally. Previous efforts at modeling tension in bolts have been limited in that they were not readily applicable to analyses of realistic bolted connections. The simulated load distributions on the shank and the threads in a single-bolt assembly showed good comparison to the gathered experimental data as did the simulated, time dependent creep loss in the …

Fishing With Geographic Information Systems, James L. Freeman

Scholars Week

Title: Fishing With Geographic Information Systems (GIS)

Author: Lance Freeman

Mentor: Dr. Haluk Cetin

This study was conducted to utilize multiple geographic information systems (GIS) applications for specific parts of Kentucky Lake and Lake Barkley. Using Lowrance Insight Genesis, along with topographical maps to help utilize time on the water keeping fisherman in the areas they want to target for specific types of cover and structure to help catch what they are after. Most of this information had to come from typical seasonal patterns and research into a lakes history as to how it was made, along with what is …

Improved 2d And 3d Resistivity Surveys Using Buried Electrodes And Optimized Arrays: The Multi-Electrode Resistivity Implant Technique (Merit), Henok Gidey Kiflu

USF Tampa Graduate Theses and Dissertations

This thesis presents a novel resistivity method called Multi-Electrode resistivity technique (MERIT) that is used for high resolution imaging of complex geologic features at depth and near the edges of survey lines. The MERIT electrodes are especially shaped and designed to be self-driven using a robust-direct push technique. Measurements are taken using optimized arrays that are generated using a modified version of the “Compare-R” optimization algorithm. This work focused on both two-dimensional (MERIT2D) and three-dimensional (MERIT3D) applications of the buried array and show the relevance of the additional information gained by the addition of deep electrodes especially in sites with …