Civil and Environmental Engineering Commons^™

Life Cycle Environmental And Economic Performance Of Biochar Compared With Activated Carbon: A Meta-Analysis, Hashim A. Alhashimi, Can B. Aktas

Civil Engineering Faculty Publications

As the commercial production and distribution of biochar continues to grow internationally, and its applications diversifying from its early uses as soil amendment, it is important to study the environmental impacts and economic performance of biochar in comparison to activated carbon in order to assess its value. The goal of the study was to assess, through a meta-analysis, the environmental and economic performance of biochar in comparison to activated carbon under an equivalent functional unit to adsorb heavy metals. More than 80 data points on adsorption capacity of biochar and activated carbon were identified through literature, which were statistically analyzed …

Measurements Of Dermal Uptake Of Nicotine Directly From Air And Clothing, G. Bekö, Glenn Morrison, C. J. Weschler, H. M. Koch, C. Pälmke, T. Salthammer, T. Schripp, J. Toftum, G. Clausen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this preliminary study, we have investigated whether dermal uptake of nicotine directly from air or indirectly from clothing can be a meaningful exposure pathway. Two participants wearing only shorts and a third participant wearing clean cotton clothes were exposed to environmental tobacco smoke (ETS), generated by mechanically "smoking" cigarettes, for three hours in a chamber while breathing clean air from head-enveloping hoods. The average nicotine concentration (420 μg/m3) was comparable to the highest levels reported for smoking sections of pubs. Urine samples were collected immediately before exposure and 60-hour post-exposure for bare-skinned participants. For the clothed participant, post-exposure urine …

Oxidation Pond For Municipal Wastewater Treatment, Erick Butler, Yung-Tse Hung, Mohammed Suleiman Al Ahmad, Ruth Yu-Li Yeh, Robert Lian-Huey Lu, Yen-Pei Fu

Civil and Environmental Engineering Faculty Publications

This literature review examines process, design, and cost issues related to using oxidation ponds for wastewater treatment. Many of the topics have applications at either full scale or in isolation for laboratory analysis. Oxidation ponds have many advantages. The oxidation pond treatment process is natural, because it uses microorganisms such as bacteria and algae. This makes the method of treatment cost-effective in terms of its construction, maintenance, and energy requirements. Oxidation ponds are also productive, because it generates effluent that can be used for other applications. Finally, oxidation ponds can be considered a sustainable method for treatment of wastewater.

A Framework For Measuring The Spatial Equity In The Distribution Of Public Transportation Benefits, Seyyed Amir Hosein Mortazavi, Meisam Akbarzadeh

Journal of Public Transportation

This paper proposes that an equitable transit system requires that the geographical distribution of transit service benefits conform to the geographical distribution of the citizens with the greatest need for public transportation. This is the essence of vertical equity. This study calculated “connectivity power,” which reflects public transit service quality in each traffic analysis zone (TAZ) in a city to indicate the amount of benefit that TAZ is receiving from the transit system. The number of carless citizens in each TAZ was also calculated as an index of need to the public transit services in that area. Conformity of need …

Identifying Key Factors Of Rail Transit Service Quality: An Empirical Analysis For Istanbul, Erkan Isikli, Nezir Aydin, Erkan Celik, Alev Taskin Gumus

Journal of Public Transportation

Providing a high quality of service in public transportation is essential to reduce dissatisfactions stemming from traffic congestion and noise. Public transport providers need to find ways to dilute the effects of immoderate use of private cars in big cities while maintaining a sufficient level of customer satisfaction. This study aimed to identify the key service quality (SQ) factors that drive passenger satisfaction in Istanbul’s rail transit (RT) system using data obtained from an extensive survey conducted by the Istanbul Public Transportation Co. A total of 11,116 passengers who used rail transport from May 15–June 3, 2012, and June 17–July …

Impact Of Different Bus Stop Designs On Bus Operating Time Components, Xiaodong Liu, Yao Yang, Meng Meng, Andreas Rau

Journal of Public Transportation

The design of bus stops significantly affects bus operation. The delay time caused by inappropriate bus stop design adversely influences the efficiency of the system. This paper aims to examine the influence of bus stops on bus operating time components through statistical analysis, using Singapore as a case study. Two common types of bus stops, bus bay and curb-side stop, were investigated during the field survey to obtain actual data of bus operation at stops. Sixteen stops were chosen in pairs to compare the differences in operating time at bus stops. Bus operating times, including acceleration time, dwell time, deceleration …

A New Market Segmentation Approach: Evidence From Two Canadian Cities, Dea Van Lierop, Ahmed El-Geneidy

Journal of Public Transportation

Traditionally, transit market research has categorized passengers into two distinct groups: captive riders and choice riders. Market analyses that depend on such broad categories are likely to overlook important details about the needs and desires of their customer base. This study attempts to better understand the complexities of the different groups who take transit by using information from five years of customer satisfaction questionnaires collected by two Canadian transit providers. Employing a series of clustering techniques, the analysis reveals that nine market segments are present across different modes in both transit agencies. Three different overarching groups of transit users are …

Analysis Of Autonomous Vehicle Policies, Bryan Gibson

Kentucky Transportation Center Research Report

The rapid development and adoption of connected and autonomous vehicles will transform the U.S. transportation system over the next 30 years. Although the widespread use of fully connected and autonomous vehicles is still several years away, it is nonetheless critical that legislators, policymakers, and regulators understand how the presence of these vehicles will restructure the operation of roadway networks. Without a doubt, lawmakers and policymakers will need to develop new laws — and revise existing ones — to account for the presence of connected and autonomous vehicles. This report provides an overview of connected and autonomous vehicles — their positives …

Development Of A Research Project Tracking System, Joseph D. Crabtree, Bradley A. Rogers

Kentucky Transportation Center Research Report

The Kentucky Transportation Center, in cooperation with the Kentucky Transportation Cabinet, has developed a Research Project Tracking System (RPTS). The RPTS is web-based and includes a database of active (and recently completed) research projects. The system allows authorized users to access and edit the project data, enter new projects into the system, and produce periodic progress reports. It produces a homepage (or dashboard) for each project, and it provides links to key project documents. It also has the capability to track the implementation of research results on a project-by-project basis.

A Programmatic Approach To Long-Term Bridge Preventive Maintenance, Danny Wells, Bobby W. Meade, Theodore Hopwood Ii, Sudhir Palle

Kentucky Transportation Center Research Report

State transportation agencies use cost-effective preventive maintenance (PM) programs to preserve existing roadway systems, slow down their deterioration, and improve their functional condition. Currently, KYTC’s bridge inventory includes approximately 10,000 structures, and by 2018, most of these structures will have been in use for at least 50 years. Because there is insufficient funding available to pursue a large-scale bridge replacement program, it is critical for the Cabinet to prolong the lives of its bridges by using economical strategies. This report provides guidance that the Kentucky Transportation Cabinet (KYTC) can use to develop and implement a statewide bridge PM program. Drawing …

Protocol To Evaluate And Load Rate Existing Bridges, Maria Szerszen, Ali Alhajami

Nebraska Department of Transportation: Research Reports

Load tests can be used to verify component and system performance under a known live load and provide an alternative evaluation methodology to analytically computed the load rating of a bridge. Procedures for nondestructive load testing, which involves field observations and measurements of in- service bridges and field testing often can revel additional capacity since analytical bridge rating tend to be fairly conservative. The goal of presented research was to develop a data-driven rating process to assess and rate bridges. This data-driven rating system reduces the subjective judgment of the bridge inspectors through the use of computer models and field …

Air Exchange Rates And Alternatuve Vapor Entry Pathways To Inform Vapor Intrusion Exposure Risk Assessments, Rivka Reichman, Mohammadyousef Roghani, Evan J. Willett, Elham Shirazi, Kelly G. Pennell

Civil Engineering Faculty Publications

Vapor intrusion (VI) is a term used to describe indoor air (IA) contamination that occurs due to the migration of chemical vapors in the soil and groundwater. The overall vapor transport process depends on several factors such as contaminant source characteristics, subsurface conditions, building characteristics, and general site conditions. However, the classic VI conceptual model does not adequately account for the physics of airflow around and inside a building and does not account for chemical emissions from alternative “preferential” pathways (e.g. sewers and other utility connections) into IA spaces. This mini-review provides information about recent research related to building air …

Correlating Methane Production To Microbiota In Anaerobic Digesters Fed Synthetic Wastewater, Kaushik Venkiteshwaran, K. Milferstedt, M. Fujimoto, M. Johnson, Daniel Zitomer

Civil and Environmental Engineering Faculty Research and Publications

A quantitative structure activity relationship (QSAR) between relative abundance values and digester methane production rate was developed. For this, 50 triplicate anaerobic digester sets (150 total digesters) were each seeded with different methanogenic biomass samples obtained from full-scale, engineered methanogenic systems. Although all digesters were operated identically for at least 5 solids retention times (SRTs), their quasi steady-state function varied significantly, with average daily methane production rates ranging from 0.09 ± 0.004 to 1 ± 0.05 L-CH₄/L_R-day (L_R = Liter of reactor volume) (average ± standard deviation). Digester microbial community structure was analyzed using more …

Cloud-Based Analytic Element Groundwater Modeling, Jacob Baird Fullerton

Theses and Dissertations

Managing groundwater resources requires computer modeling software, which in turn brings its own costs in education and usage fees. Although many groundwater modeling programs can be obtained at relatively inexpensive rates the hidden costs of software training remain high in general. What has been done is to make both the software and training available online for free, but this method delegates all responsibility to the users for both accessing the software in addition to learning how to use it properly. In this research the accessibility of groundwater models has been improved upon by creating a web app of an open …

6 Field-Observed Cracking Of Paired Lightweight And Normalweight Concrete Bridge Decks, Tara L. Cavalline, Jeremy T. Calamusa, Amy M. Kitts, Brett Q. Tempest

Engineering Technology Faculty Publications

Research has suggested that conventional lightweight concrete can offer durability advantages due to reduced cracking tendency. Although a number of publications exist providing the results of laboratory-based studies on the durability performance of lightweight concrete (with lightweight coarse aggregate) and internally cured concrete (using prewetted lightweight fine aggregate), far fewer field studies of durability performance of conventional lightweight concrete bridge decks in service have been performed. This study was commissioned to provide insight to a highway agency on whether enhanced durability performance, and therefore reduced maintenance and longer lifecycles, could be anticipated from existing lightweight concrete bridge decks that were …

Characterizing Current And Geologic Phosphorus In Utah Lake Sediment Using Field Samples, Laboratory Methods, And Statistical Analysis: Implications For Water Quality Issues, Hani Yousef Abu Hmeidan

Theses and Dissertations

Phosphorus is an essential nutrient for aquatic life forms and plays a major role in the algae blooms that occur in lakes and reservoirs. It is considered a primary limiting nutrient of phytoplankton growth in streams, lakes, and reservoirs. Excess amounts of phosphorous may cause excess growth and biomass of algae. If phosphorus is available in excess, often from sewage and industrial discharges, the high levels in a lake or reservoir can lead to eutrophication. Utah Lake is a shallow, basin-bottom lake in a semi-arid climate with sediments that are thousands of feet thick. Starting 165 years ago, humans have …

Photovoltaic System Installation In Belize, Austin J. Stewart

Construction Management

California Polytechnic State University’s National Electrical Contractors Association Student Chapter (NECA) was selected by the ELECTRI Council to take part in its Student Passport Initiative program, through which participants engage in meaningful service-learning experiences in developing communities. The team was tasked with the design and construction of a photovoltaic system for San Pedro Roman Catholic Primary School in San Pedro, Belize, with the purpose of enabling the school to achieve carbon neutrality with respect to utility grid power consumption. The team of five students collaborated primarily with two professors, two alumni, and an accomplished electrical contractor from Belize to perform …

Bs News March/April

Building Services Engineering

No abstract provided.

Aei Student Design Competition: Texas Tech Sports Performance Facility, Jacob G. Kockrow

Construction Management

The AEI Student Competition is an annual event that pushes students in the disciplines of engineering and construction management to collaborate and demonstrate creative solutions to the challenges presented. This year, the competition is focused on the new Texas Tech Sports Performance Sports Facility located in Lubbock, Texas, where they tore down the existing building and are in the process of completing the new facility. Instead of recreating the plans given, we designed a brand new building to meet the project requirements, which included a $48 million budget and a 34-month construction duration. As the Construction Manager for the project, …

Roman Catholic Elementary Photovoltaic Project, Joe Gugale

Construction Management

The use of photovoltaic panels in construction is rapidly growing all around the world. This paper summarizes the findings of a student-based project in Belize that was installed December 2016. The San Pedro Roman Catholic Primary School is the largest school on the island of Ambergris Caye, Belize with over 700 students in 22 classrooms ranging from Kindergarten to 8th grade. Although the school has power supplied from the local electrical utility, power outages occur frequently and the cost of electricity is considerable.

The project had several issues related to preparing the design, acquiring the materials and equipment, and developing …

Value Of Prefabrication Of Fire Sprinkler Components In The Fire Sprinkler Industry, Matt Fisher

Construction Management

Every day the construction industry is looking for new ways to improve time efficiency and project profitability. Companies in the past have tried value engineering and schedule crashing to save time and money. As the industry continues to grow and innovate, new concepts are being applied. Building Information Modeling (BIM) is one of these ideas that has made a large impact in the construction industry. BIM is a digital 3D modeling system that allows the user to create a complete rendering of a construction project complete with mechanical, electrical, and plumbing integrated into the model. With this model a prospective …

Investigation Into Feasibility Of Off-Grid Small Dwelling In Slo County, Sam Labberton

Construction Management

The trend towards green, sustainable living has grown more and more in the housing industry each year since before the turn of the century; solar in the last decade alone has grown by 60% (http://www.seia.org/research-resources/solar-industry-data). Living on a grid that runs on unclean sources of energy already has led us into an environmental disaster some call irreversible. This paper takes a detailed look into the feasibility of a small, off-grid, dwelling that utilizes modern technology in order to live more modestly. In conjunction with great advancements in solar technology along with energy storage such as deep cycle lead-acid batteries, on-site …

Tidal Energy And How It Pertains To The Construction Industry, Armin Latifi

Construction Management

Renewable Energy is on the forefront of many global discussions. The concern of numerous scientific findings on the impact humanity has had on the environment has grown in recent years. Since alternative energy sources, such as solar and wind, have already made substantial progress, I have decided to focus my attention on tidal energy specifically. This topic will serve as the main focus of this essay. Within this essay, I will examine how tidal energy pertains to the construction industry through four distinguished chapters: (1) What kind of tidal technology exist and what does the construction aspect of these tidal …

Implementing A Working Bim Model Halfway Through A Public Cm Multi-Prime Project: A Case Study, Jim Roth

Construction Management

The development of a BIM (building information model) model is a standard practice in today’s construction world. While the process of model adoption nearly has a written formula, implementing a BIM model in the midst of a project is a rare occurrence. This paper will examine the implementation of a working BIM model halfway through a public multiple prime contractor project managed by a construction manager (CM) in California. The project cost is roughly $20 million and of moderate complexity. This paper will outline the factors leading up to the ultimate decision of creating a working model, the process of …

An Analysis Of The Benefits In Estimating At Different Pipe Union Labor Rates, A.J. Chamorro

Construction Management

This paper is an analysis of the costs and benefits of estimating at different union labor rates, based on the location of the project and which jurisdiction the project falls in. The basis of the research is a case study of a Bay Area mechanical contractor (Contractor X) which previously estimated at a single labor rate, and recently developed variable estimating. Through that case study, best practices are developed for union pipe trade estimating. The results of the case study show that estimating protocol should be determined on a project by project basis, and company resources and manpower have to …

Case Study: Laborer Safety Training For Small To Mid-Sized General Contractors, Shawn Kuehter

Construction Management

The purpose of this study is to determine a relationship between safety spending and the resulting safety records for small to mid sized construction companies, particularly general contractors, and build on existing safety practices. It will shed light on why safety spending in construction is a very important aspect to include in any company’s budget. A case study of Quiring General, LLC, a small to mid sized general contractor based out of Fresno, CA will be the core of this paper as it includes examples of injuries of laborers and their impact they have. The impact focused on in this …

Using Satellite Observations To Characterize The Response Of Estuarine Turbidity Maxima To External Forcing, Austin S. Hudson, Stefan A. Talke, David A. Jay

Civil and Environmental Engineering Faculty Publications and Presentations

This study explores the spatial and temporal character of turbidity maxima in the Columbia River Estuary (CRE) using satellite observations. Surface reflectance data measured by the Moderate Imaging Spectroradiometer (MODIS) were calibrated against in situ measurements of surface turbidity (R2 = 0.85 for 205 measurements). More than 1500 satellite images from 2000 to 2015 were then conditionally sampled to explore the physical processes that drive the spatial distribution of the turbidity field. We find satellite measurements are able to describe seasonal, spring–neap, and spatial features of the estuarine turbidity maxima (ETM) that are not easily observable by other means. System-wide …

Mass Exchange Dynamics Of Surface And Subsurface Oil In Shallow-Water Transport, Saeed Moghimi, Jorge Ramirez, Juan M. Restrepo, Shankar Venkataramani

Civil and Environmental Engineering Faculty Publications and Presentations

We formulate a model for the mass exchange between oil at and below the sea surface. This is a particularly important aspect of modeling oil spills. Surface and subsurface oil have different chemical and transport characteristics and lumping them together would compromise the accuracy of the resulting model. Without observational or computational constraints, it is thus not possible to quantitatively predict oil spills based upon partial field observations of surface and/or sub-surface oil. The primary challenge in capturing the mass exchange is that the principal mechanisms are on the microscale. This is a serious barrier to developing practical models for …

Potential Crop Evapotranspiration And Surface Evaporation Estimates Via A Gridded Weather Forcing Dataset, Clayton S. Lewis, L. Niel Allen

Civil and Environmental Engineering Faculty Publications

Absent local weather stations, a gridded weather dataset can provide information useful for water management in irrigated areas including potential crop evapotranspiration calculations. In estimating crop irrigation requirements and surface evaporation in Utah, United States of America, methodology and software were developed using the ASCE Standardized Penman-Monteith Reference Evapotranspiration equation with input climate drivers from the North American Land Data Assimilation System (NLDAS) gridded weather forcing dataset and a digital elevation model. A simple procedure was devised to correct bias in NLDAS relative humidity and air temperature data based on comparison to weather data from ground stations. Potential evapotranspiration was …

Using Percent Complete Metric To Highlight The Root Causes Of Delays In Home Building Industry, Somik Ghosh

The Professional Constructor

Based on the prediction of US Housing and Urban Development (US HUD), the demand for new homes will increase in the coming months to accompany the steady sales of existing homes. To meet the future demand, the home building industry has to continuously improve and get rid of inherent problems such as frequent delays. While delays have been a common occurrence in the residential and commercial construction alike, investigations of delays in the residential sector has not received much attention. With the goal of exploring the causes of delays in the home building industry, a multiple case study approach was …