Civil and Environmental Engineering Commons^™

Introducing Concentrations Into The Cal Poly Cm Program, Kevin L. Barry

Construction Management

This paper explores the introduction and integration of industry related concentrations into the Construction Management program at Cal Poly San Luis Obispo. Specialization has been an integral part of not only the construction industry, but also throughout the industrialization of America. With these concentrations, students will be able to select either an industry sector or job function they are interested in pursuing and take additional classes that dive deeper into that specific facet of industry rather than only brushing the surface with general construction education classes. This program will better prepare students for industry and give those who have a …

A Recommendation To Implement "Spanish In Construction" Topics Course, Benjamin W. Dimer

Construction Management

The purpose of this report is to recommend the addition of a Spanish in Construction class to the Construction Management curriculum. Many of Cal Poly’s graduates enter a construction workforce which is composed heavily of Hispanic and Latino members. Historically, Hispanics and Latinos account for not only the most rapidly growing populations of construction, but also the most proportionally at-risk. In an industry as dangerous as construction, it is important that students are well-rounded and well-prepared to contribute as safely, efficiently, and flawlessly as possible. Thorough literature review and an interview of part-time Cal Poly lecturer and industry veteran, Eric …

Analysis Of The Construction Management Co-Op Program At California Polytechnic State University, Danile Stanley Leavens

Construction Management

Work integrated learning (WIL) programs such as internships or co-operative education programs are a common way of providing practical experience to students while they are completing their degree. This paper will examine the benefits of WIL programs for the students, companies, and universities that actively participate in them. In addition, this analysis researches the findings of other studies on student’s success as a result of WIL programs, how companies are improved with higher quality employees, and the networking connections that universities receive due to students creating great relationships with companies. In an attempt to improve the Construction Management co-op program …

Integrated Design-Bid-Build And Its Effects On Integrated Project Delivery Drivers, Alexander G. Sargiss

Construction Management

Integrated project delivery is becoming a more common and successful delivery method in the construction industry compared to more traditional methods such as design-bid-build. Integrated Design-Bid-Build is a hybrid between the two which has been implemented very few times to test if it can be used as a more viable delivery method in the future. There has been very little research in to Integrated Design-Bid-Build that is accessible for analysis. This research study examines case studies of projects completed using IPD and analyzes their “IPD Profiles” which are measured using five primary project drivers. These project drivers are: cost predictability, …

A Case Study On Project Engage, A Step To Solve Alcoholism In The Construction Industry, Tyler Addison Lee

Construction Management

Alcohol is very prevalent in most industries around the globe, but the construction industry has been placed at the top, ranking number two for the most people suffering from alcoholism in the industry according to SAMHSA’s study. Some experts have said this is due to the hard and physical requirements of the job, time requirements of the job, and the stress involved within building a construction project. Common practice in the industry is that when a person is cited for being under the influence while at work, they will be let go, fired, or given a warning depending on the …

National Association Of Home Builders' Residential Construction Management Competition Guidebook, Eric Angelo Bet

Construction Management

With today’s universities, especially Cal Poly, stressing the concept of “Learn by Doing” to prepare students for successful careers, case competitions are gaining popularity and prestige amongst recruiters. By working well in team settings and showcasing one’s knowledge in front of a panel of industry judges, case competitions give students great undergraduate experience and confidence once they begin their full-time careers. One of these case competitions is the National Association of Home Builders (NAHB) Residential Construction Management Competition (RCMC). The NAHB RCMC asks students to create a fully-encompassing development proposal on a real-world site located in the United States. This …

Advantages Of Integrating Technology Knowledge Into Undergraduate Curriculum, Nicholas Nam

Construction Management

Advancements in technology have made daily construction tasks easier and more efficient and will continue to do so. Cal Poly currently offers a BIM course but it is limited to certain programs and the extent of which these are taught are also limited. This paper will explore the inputs of current Cal Poly construction management students to see how there can be a successful implantation of technology courses and which programs to heavily integrate. The different types of programs available are increasing and are continuing to better themselves, and to have knowledge of these programs can help translate into skills …

Remodeling Office For Growing Grounds, Kyle R. Fawley

Construction Management

This project was my first real re-condition project for a portion of an office space for Growing Grounds Farm here in San Luis Obispo. The purpose of this essay is to look back onto my experience and see how much I struggled and learned, and how I can benefit from it in the future. Throughout my project, I made sure there was constant communication between myself and Craig Wilson, program manager for Growing Grounds Farm, with clarifications and several updates. I made sure to fit and complete the project within my tight schedule and adjust it throughout the process. Throughout …

Heavy Equipment As A Topics Course At Cal Poly San Luis Obispo Construction Management Curriculum, Samuel G. Duner

Construction Management

In the construction industry it has been said that no project is the same. That each project awarded to a contractor will have new and unique details that were not faced in the previous projects. However, all the management skills acquired by the project team will be used to complete the current project. One of those skills that seems to be underutilized and does not receive enough emphasis, is the management of heavy equipment. The purpose of this paper will be to highlight details of heavy equipment management that need to be emphasized in the Cal Poly construction management curriculum, …

Case Study On Virtual Reality In Construction, Kyle Eugene Haggard

Construction Management

Virtual reality has evolved into a practical technology that has recently been introduced across many different industries. In the construction industry alone, the innovative tool has started to show its worth by limiting rework, time savings, and identifying design flaws. This case study outlines the goals, benefits, and challenges for virtual reality in construction as it relates to BNBuilder’s Spectrum/Vertex project. Due to the infancy of the technology, suggestions were collected from the interviewees and discussed in the subsequent paragraphs. The information for this case study was collected from: phone call interviews from BNBuilders’ field and office employees, the vice …

Montgomery High School Baseball Clubhouse Expansion, Armando Ramirez

Construction Management

After graduating from Montgomery High School (MOH) in 2013, I knew that I wanted to give back when the opportunity was given. More specifically, I hoped to help the baseball team. Throughout my years playing baseball at MOH, the coaches and players constantly expressed interest in expanding the clubhouse as it was deemed too small and uncomfortable. After the first meeting with the owner, Coach Hermosillo, a budget was established and preliminary design ideas were brought up. It was important for him to implement the feedback given from the current players. After several meetings and different iterations of the expanded …

Self-Healing Concrete In Commercial Construction, James Anthony Frazier

Construction Management

Crack formation is common among concrete used for all different types of construction. While cracking is inevitable in concrete, it can create instabilities that can compromise an entire building’s structural integrity. New advancements are being made in the biological and engineering fields that are providing a solution to this problem. Certain bacteria and chemicals when mixed provide a reaction that creates limestone material to re-heal cracks in concrete. Using these materials to create this reaction, while incorporating the reactants necessary in concrete mixtures for building, it is possible to eliminate maintenance costs and improve building strength over time. Currently, these …

Economic Impact Analysis Of Bridge Construction, Funda Yavuz

Masters Theses

Traffic disruption due to bridge construction has been reduced to several hours with the development of methods characterized as Accelerated Bridge Construction (ABC). Associated risks and additional activities involved with the accelerated construction result in an increased initial project cost. This additional cost is offset by the benefits of reduced mobility impact time such as maintenance of traffic cost, life-cycle cost, and economic impact on surrounding communities and businesses as well as the ability to address seasonal limitations. Traditionally, the savings in user cost from reduced mobility impact time is used to justify the additional cost of accelerated construction implementations. …

Geometry-Based Mass Grading Of Mango Fruits Using Image Processing, M. A. Momin, Md Towfiqur Rahman, M. S. Sultana, C. Igathinathane, A. T. M. Ziauddin, T. E. Grift

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Mango (Mangifera indica) is an important, and popular fruit in Bangladesh. However, the post-harvest processing of it is still mostly performed manually, a situation far from satisfactory, in terms of accuracy and throughput. To automate the grading of mangos (geometry and shape), we developed an image acquisition and processing system to extract projected area, perimeter, and roundness features. In this system, images were acquired using a XGA format color camera of 8-bit gray levels using fluorescent lighting. An image processing algorithm based on region based global thresholding color binarization, combined with median filter and morphological analysis was developed …

Quantifying The Impact Of Truck Only Lanes On Vehicular Emissions On A Limited-Access Highway, Edward Chee Tang

Master's Theses

This thesis seeks to estimate CO₂ emissions on a portion of the U.S. 101 highway in San Luis Obispo County before and after construction of a truck only lane on the Cuesta Grade. Towards that aim, the microsimulation software, VISSIM, was used in conjunction with the Environmental Protection Agency’s emissions model, MOVES. The microsimulation model was calibrated and validated against historical and present traffic volumes obtained from Caltrans with good results using several validation measures. It was found that CO₂ emissions did decrease between 1998 and 2012 (pre and post lane addition), but this effect was shown to …

Evaluation Of Pc-Based Virtual Reality As A Tool To Analyze Pedestrian Behavior At Midblock Crossings, Kristina Lynn Mai

Master's Theses

The aim of this research was to analyze if current generation PC-driven virtual reality simulations can be used to accurately mimic and therefore, observe behavior at a crosswalk. Toward that goal, the following research tasks were carried out: a) Designing a 3D virtual crosswalk and recruiting volunteers to wear the HTC Vive headset and to walk across the street, b) Setting up cameras near the midblock crosswalk on University Drive at California Polytechnic State University, San Luis Obispo to observe pedestrians, and c) Comparing pedestrian behavior data from both the virtual and real midblock crosswalk. The comparison was based on …

Estimating Transit Ridership Patterns Through Automated Data Collection Technology: A Case Study In San Luis Obispo, California, Ashley Kim

Master's Theses

Public transportation offers a crucial solution to the travel demand in light of national and global economic, energy, and environmental challenges. If implemented effectively, public transit offers an affordable, convenient, and sustainable transportation mode. Implementation of new technologies for information-harvesting may lead to more effective transit operations. This study examines the potential of automated data collection technologies to analyzing and understand the origin-destination flow patterns, which is essential for transit route planning and stop location placement.

This thesis investigates the collection and analysis of data of passengers onboard San Luis Obispo Transit buses in February and March 2017 using Bluetooth …

Injury Severity Of Truck Drivers In Crashes At Highway–Rail Grade Crossings, Waleed Ali Khan

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

There is a noticeable difference between different road users, specifically between passenger vehicles and heavy vehicles such as its length and weight. The majority of previous research were focused on general highway traffic that included passenger cars, trucks, buses, motorcycles, etc. Moreover, HRGC safety studies of specific types of vehicles are relatively few and heavy vehicle safety at grade crossing is even more under-explored.

This research thus focuses on the following objectives: Identify factors related to different injury severity levels of heavy-vehicle drivers (truck/truck-trailer) drivers in crashes reported at HRGCs; to identify a more suitable statistical model for injury severity …

Regulatory Barriers To Approval Of New Technologies For Small Drinking Water Systems, Deanna T. Ringenberg

Department of Environmental Engineering: Theses and Other Student Research

Small drinking water systems face different challenges than large drinking water systems. Innovative technologies can provide cost and reliability benefits to small systems, but new technologies are not frequently considered. One important barrier to the implementation of new technologies is obtaining state drinking water agency approval.

To identify specific state regulatory barriers, a survey including sixteen questions was sent to the 49 state agencies. The survey included questions regarding their acceptance programs, experiences with new technologies, barriers, data needs for technology approval, and interest in a shared approach for acceptance of new technologies. The survey was sent in 2015 and …

Land Use And Active Travel: A Complex Relationship, Steven R. Gehrke

TREC Project Briefs

While it’s accepted that mixed-use development promotes active travel, researchers don’t have a consensus on exactly how land use determines people’s travel patterns.

Diplomacy Lab Provides Term-Length Group Projects Integrating Policy Analysis And Liberal Arts Into The Traditional Engineering Classroom, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Science in diplomacy, the use of trained scientist to inform and support foreign policy objectives, has been a part of U.S. foreign policy since the time of Benjamin Franklin. The Diplomacy Laboratory project, a public-private partnership, allows the Department of State to 'course source' projects to seek input from universities and to recruit talented students to consider careers in diplomacy. This paper provides a summary of a case study using a DipLab project as part of a term-length, writing assignment in courses for undergraduate and graduate environmental engineering students. An overview of DipLab and suggested best practices to integrate DipLab …

Reducing Costs While Maintaining Learning Outcomes Using Blended, Flipped, And Mastery Pedagogy To Teach Introduction To Environmental Engineering, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

As part of a cost-savings initiative, an existing course of 'introduction to environmental engineering' offered using a 'traditional' format of didactic class meetings supplemented with hands-on laboratory sessions, was changed significantly. The 'modified' format uses 'blended', 'flipped', and 'mastery' approaches to teach "2601: Fundamentals of Environmental Engineering" to approximately 60 sophomores pursuing baccalaureate degrees in environmental, civil, or architectural engineering, each semester. This paper presents a summary of the results from eight course offerings over a period of four years to more than 450 total students. Assessments included student grades; open-ended invitations for anonymous feedback at the end of each …

Using Nursing Theory To Improve The Teaching Of Engineering Practice, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Engineering education includes both classroom training in sciences and professional skills as well as learning-through-doing to integrate practice and engineering design into the future licensed Professional Engineer (PE). In a similar manner, nursing education includes both classroom training in sciences and professional skills as well as learning through doing to integrate practice and caring into the future licensed Registered Nurse (RN). From the mid-19th century until modern day, the fields of environmental engineering and community health nursing have worked side-by-side to prevent disease while promoting health and wellness. This paper provides a synthesis of previously published case studies by the …

Effects Of Vegetation On Slope Stability: A Review, Roberto José Marín Sánchez, Juan Pablo Osorio

Articles

Slope stability is usually affected by factors that reduce soil strength and increase driving forces acting on the slope material, sometimes generating mass movements. Among these factors, vegetation has an important role related to hydrological (e.g. evapotranspiration and infiltration) and mechanical (e.g. tree surcharge and root reinforcement provided by trees) mechanisms. In this review, vegetation influences associated to slope stability are identified, describing the mechanisms involved in the occurrence of mass movements. Finally, the way these factors affect slope stability is explained according to soil properties, climatic conditions and environmental characteristics.

Corrosion Map For Metal Pipes In Coastal Louisiana, Sanjay Tewari

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Transportation agencies often allow metal pipes as an option for cross drains under/along roads and highways. Metal culverts can corrode over time at various rates based on their environmental conditions (e.g., corrosive nature of coastal soils, high water table, and saltwater intrusion).

This project was focused on applying available soil data, such as spatial distribution of soil types and soil characteristics (e.g., pH and conductivity), towards creating a Geographic Information System (GIS) based map to identify corrosion zones in coastal Louisiana. The effect of the soil characteristics (pH and conductivity) was incorporated in to the published corrosion models for calculating …

Rca: Use And Future Possibilities, Bushra Marium Islam

Theses

Reuse and recycling of concrete is essential for construction purposes. There has been progressive development in construction projects but at the same time it has an inverse effect on the environment. Concrete structures are built and demolished continuously all over the world, generating tons of waste materials which are actually reusable in concrete production itself. This paper emphasis on recycled concrete aggregate (RCA) and many characteristics of RCA. This paper studies RCA’s different properties. RCA’s replacement in the place of natural aggregate is discussed. The proper amount and researches done on RCA improvement have also been discussed for further in …

Walking Behavior Of Individuals With And Without Disabilities At Right-Angle Turning Facility, Nirdosh Gaire, Mohammad Sadra Sharifi, Keith M. Christensen, Anthony Chen, Ziqi Song

Civil and Environmental Engineering Faculty Publications

To accommodate the needs of pedestrians, urban designers need to carefully consider pedestrian walking behavior in different walking environments. Detailed studies of the walking behavior of pedestrians have been conducted and used for pedestrian simulation models. A right-angle turning facility (RATF) is found in many built environments. Hence the study of pedestrians' walking behavior in RATFs is important to build pedestrian simulation models. Previous studies have failed to address the walking behavior of individuals with visual and mobility disabilities even though they comprise a significant portion of the population in the United States. The purpose of this paper is to …

Analysis Of Response Of Flexible Pavements Using Finite Element Method, R.M. Mulungye, P.M.O Owende, K. Mellon

The ITB Journal

The characteristic response of flexible pavements under traffic load depict a delayed lateral strain relaxation (Viscoelasticity), a phenomenon that may be more accurately and expeditiously analysed using finite element (FE) viscoelastic response models. In this study a flexible pavement was modelled using ANSYS/ED finite element software suite. The pavement model was subjected to cyclic loading that simulated three levels of truck loads on 10R20 tyres at four tyre inflation pressures (viz. 350,490,630 and 770 kPa). The modelled results were in good agreement with the measured in-situ full-scale test data. Therefore, for known pavement material characteristics and tyre-pavement contact regime, finite …

Sensor System, Implantable Sensor And Method For Remote Sensing Of A Stimulus In Vivo, Eric H. Ledet, Rebecca A. Wachs, Keegan Paul Cole, David Fiorella

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A sensor system for sensing a stimulus in vivo includes an implantable sensor. The sensor comprises a passive resonator circuit having a resonant frequency and including at least a pair of generally parallel spirally wound unconnected conductive coils sandwiching a layer of solid dielectric material that manifest a change in property affecting the resonant frequency in response to application of the stimulus to the layer. A resonant frequency of the sensor is modulated by altering the spacing or gap between the coils or altering the overlapping area of the coils. The sensor is energized through application of radio frequency energy …

Potential Of Rainwater Harvesting In Meeting The Domestic Outdoor Demand: A Study In Dry And Wet Regions Of The United States, Kazi Ali Tamaddun, Ajay Kalra, Sajjad Ahmad

Civil and Environmental Engineering and Construction Faculty Research

Feasibility of meeting the outdoor water demand with rainwater harvesting (RWH) was evaluated for the states of Arizona and Florida as representatives of dry and wet regions, respectively, using a system dynamic model. The potential of RWH was found to be highly sensitive to the demand of water, desert landscaping potential, and the percentage of households with RWH systems. The percentage of demand met through RWH and the storage potential of a 50-gallon rainwater barrel was found to be significant even for arid regions. The model can be used to compare among various influencing parameters of RWH systems.