Civil and Environmental Engineering Commons^™

The Bridge Newsletter Winter 2018, Missouri University Of Science And Technology

The Bridge Newsletter

-Pouring the cornerstone for the ACML
-Showalter selected as Kiewit Faculty Scholar
-Ma tests a low-cost method of strengthening concrete

Metagenomics Reveal Triclosan-Induced Changes In The Antibiotic Resistome Of Anaerobic Digesters, M. Fujimoto, Daniel Elliott Carey, Patrick J. Mcnamara

Civil and Environmental Engineering Faculty Research and Publications

Triclosan (TCS) is a broad-spectrum antimicrobial used in a variety of consumer products. While it was recently banned from hand soaps in the US, it is still a key ingredient in a top-selling toothpaste. TCS is a hydrophobic micropollutant that is recalcitrant under anaerobic digestion thereby resulting in high TCS concentrations in biosolids. The objective of this study was to determine the impact of TCS on the antibiotic resistome and potential cross-protection in lab-scale anaerobic digesters using shotgun metagenomics. It was hypothesized that metagenomics would reveal selection for antibiotic resistance genes (ARGs) not previously found in pure culture studies or …

An Environmental Science And Engineering Framework For Combating Antimicrobial Resistance, Amy Pruden, Reinaldo E. Alcalde, Pedro J.J. Alvarez, Nicholas Ashbolt, Heather Bischel, Natalie L. Capiro, Emily Crossette, Dominic Frigon, Kassandra Grimes, Charles N. Haas, Kaoru Ikuma, Anthony D. Kappell, Timothy M. Lapara, Lee K. Kimbell, Mengyan Li, Xu Li, Patrick J. Mcnamara, Youngwoo Seo, Mark D. Sobsey, Emanuele Sozzi, Tala Navab-Daneshmand, Lutgarde Raskin, Maria Virginia Riquelme, Peter Vikesland, Krista Wigginton, Zhi Zhou

Civil and Environmental Engineering Faculty Research and Publications

On June 20, 2017, members of the environmental engineering and science (EES) community convened at the Association of Environmental Engineering and Science Professors (AEESP) Biennial Conference for a workshop on antimicrobial resistance. With over 80 registered participants, discussion groups focused on the following topics: risk assessment, monitoring, wastewater treatment, agricultural systems, and synergies. In this study, we summarize the consensus among the workshop participants regarding the role of the EES community in understanding and mitigating the spread of antibiotic resistance via environmental pathways. Environmental scientists and engineers offer a unique and interdisciplinary perspective and expertise needed for engaging with other …

Accounting For Landscape Heterogeneity Improves Spatial Predictions Of Tree Vulnerability To Drought, Amanda M. Schwantes, Anthony J. Parolari, Jennifer J. Swenson, Daniel M. Johnson, Jean-Christopher Domec, Robert B. Jackson, Norman F. Pelak, Amilcare Porporato

Civil and Environmental Engineering Faculty Research and Publications

As climate change continues, forest vulnerability to droughts and heatwaves is increasing, but vulnerability varies regionally and locally through landscape position. Also, most models used in forecasting forest responses to heat and drought do not incorporate relevant spatial processes.

In order to improve spatial predictions of tree vulnerability, we employed a nonlinear stochastic model of soil moisture dynamics accounting for landscape differences in aspect, topography and soils. Across a watershed in central Texas we modeled dynamic water stress for a dominant tree species, Juniperus ashei, and projected future dynamic water stress through the 21^st century.

Modeled dynamic water …

Strain And Damage Self-Sensing Of Basalt Fiber Reinforced Polymer Laminates Fabricated With Carbon Nanofibers/Epoxy Composites Under Tension, Yanlei Wang, Yongshuai Wang, Baolin Wan, Baoguo Han, Gaochuang Cai, Ruijuan Chang

Civil and Environmental Engineering Faculty Research and Publications

This study investigated the strain and damage self-sensing capabilities of basalt fiber reinforced polymer (BFRP) laminates fabricated with carbon nanofibers (CNFs)/epoxy composites subjected to tensile loadings. The conduction mechanisms based on the tunnel conduction and percolation conduction theories as well as the damage evolution were also explored. A compensation circuit with a half-bridge configuration was proposed. The results indicated the resistivity of the CNFs/BFRP laminates and CNFs/epoxy composites exhibited similar change rule, indicating that the conductive networks of CNFs/BFRP laminates were governed by CNFs/epoxy composites. With the increase of strain under monotonic tensile loading, the electrical resistance response could be …

Enhancing The Durability And The Service Life Of Asphalt Pavements Through Innovative Light-Induced Self-Healing Materials, Marwa Hassan

Publications

The objective of this study was to evaluate the efficiency of a new generation of Ultraviolet (UV) light-induced selfhealing polymers in enhancing the durability and self-healing properties of asphalt mixtures. Self-healing polymers were successfully synthesized in the laboratory and were characterized using Fourier Transform Infrared Spectroscopy (FTIR). In addition, Thermogravimetric Analysis (TGA) results showed that the synthesized polymers achieved the required thermal stability to resist asphalt mixture production processes. Viscosity results showed that addition of 5% Recycled Asphalt Shingle (RAS) and/or 20% Reclaimed Asphalt Pavement (RAP) caused an increase in the viscosity of the binder blends. However, a reduction in …

Evaluation Of The Performance And Cost-Effectiveness Of Engineered Cementitious Composites (Ecc) Produced From Region 6 Local Materials, Gabriel Andres Arce Amador, Tyson Rupnow, Marwa Hassan

Publications

The project objective is to develop cost-effective Engineered Cementitious Composites (ECC) with locally available ingredients in Region 6 to address the deficiencies observed in ordinary concrete materials. The study explored the utilization of two types of river sands (coarse and fine), two types of PVA fibers (long and short), four levels of cement replacement with Class F fly ash, and the implementation of recycled crumb rubber in the performance of ECC materials. A total of 24 mix designs were prepared and evaluated in compression, tension, and bending to assess its mechanical properties. Furthermore, the cracking characteristics of the materials produced …

Modeling Sulfate Attack In Modern Concrete For Building Sustainable And Resilient Infrastructure, Zachary Grasley

Publications

External sulfate attack is a complex phenomenon and is manifested in the form of large expansion, cracking, and spalling depending on the exposure solution and material constituent properties. Several models were developed in the past to demonstrate sulfate attack mechanisms that account for the diffusion of sulfate ions into the porous concrete and the successive deformation triggered by the chemical reaction and precipitation of expansive agents. However, none of these models accounts for the effect of the migration of solvent water from the low solute concentration solution to high solute concentration solution driven by the osmotic pressure. Osmotic pressure is …

In-Situ Mechanical Characterization For Compacted Aggregates, Douglas Cortes, Paola Bandini

Publications

The evaluation of compacted unbound aggregate layers is perhaps the most common undertaking in transportation-related projects. The assessment of compaction compliance in engineered fills, subgrades, subbases, and bases in roadways and railways is central to ensure longevity of ground transportation infrastructure. In many cases, premature failures in roadways that originate in the unbound aggregate layers can be traced back to inadequate compaction. These failures are preventable, provided the problem areas can be identified by a suitable field test during construction. The most widely used method for compaction assessment during construction is the nuclear density gauge (NDG) test. While the device …

Bridge Inspecting With Unmanned Aerial Vehicles R&D, Paul Darby, Vijaya Gopu

Publications

The project achieves through research including literature, on site interviews, and experimentation: 1) a recommendation for a UAV-based system to practically assist in routine bridge inspection work in the State of Louisiana, 2) the identification and description of advantages, disadvantages, and limitations in the use of UAVs for routing bridge inspection work in Louisiana, and 3) provided recommendations for future work. The Yuneec H520 aircraft and its E90 camera are recommended, as is the need for a boat to be included as part of the system. The recommended system has advantages in reaching portions of the bridge that are difficult …

Use Of Rice Hull Ash (Rha) As A Sustainable Source Of Construction Material, Zahid Hossain, Ashraf Elsayed

Publications

With the imminent shortage of natural resources, the need to find sustainable development is the highest in recent history. Therefore, this study examines the potential uses of Rice Hull Ash (RHA) as a sustainable cementitious material (SCM) in preparation of concrete. This study also assesses the use of RHA as an alternative of commonly used polymers in preparing high-grade asphalt binders. RHA is a potential sustainable solution because it is currently being treated as an agricultural waste material, yet its high silica content makes it a potential construction material. Three different sizes of RHA (600 µm, 150 µm, and 44 …

Development Of A Self-Healing And Rejuvenating Mechanisms For Asphalt Mixtures Containing Recycled Asphalt Shingle, Marwa Hassan

Publications

The objective of this study was to test the hypothesis that hollow-fibers encapsulating a rejuvenator product could improve both self-healing, rejuvenation, and mechanical properties of asphalt mixtures. Hollow-fibers containing a rejuvenating product were synthesized via a wet spinning procedure with sodium-alginate polymer as the encapsulating material. An optimization of the production parameters for the synthesis of fibers was performed to develop fibers suitable for high-temperature and shear stress environment typical of asphalt mixture production. A self-healing experiment was conducted to evaluate the healing/rejuvenation capabilities of sodium-alginate fibers in asphalt mixtures with varying types of binders and recycled materials. Based on …

Development Of Environmentally-Friendly Stabilization Methods For Transportation Infrastructure Based On Geopolymers, Miladin Radovic, Anand Puppala

Publications

Geopolymers (GPs) have received much attention as an eco-friendly and sustainable alternative to conventional chemical additives, since they can be processed at room temperatures from aqueous solutions by utilizing waste materials (e.g. fly ash) or abundant natural sources (e.g. clay). A collaborative research study is carried out by teams from Texas A&M University (TAMU) and University of Texas at Arlington (UTA) to investigate the effectiveness of GPs for stabilizing base and subgrade materials by considering the strength and shrink-swell characteristics. Two types of clay, obtained from the North Dallas area, were mixed with a potassium-based GP synthesized from metakaolin and …

Sustainable And Equitable Financing For Pedestrian Infrastructure Maintenance, Gregory Rowangould

Publications

In many communities, pedestrian infrastructure is discontinuous, inaccessible to those with physical disabilities, and poorly maintained. Correcting these problems would be a first step in providing infrastructure to achieve the active travel and related transportation goals of many communities. One nearly universal challenge to maintaining sidewalks in a state of good repair and addressing environmental justice concerns is an adequate, sustainable, and equitable source of funding. Municipal governments across the country maintain and repair their streets and roadways; however, most require residents to maintain and repair public sidewalks adjacent to their property. These policies are difficult to enforce and may …

Bridge Deck Overlays Using Ultra-High Performance Concrete, Craig Newtson, Brad Weldon

Publications

This study investigated the use of a locally produced ultra-high performance concrete (UHPC) as an alternative to typical overlay materials. Several bond strength tests including slant-shear, splitting tension, and direct tension tests were performed to assess the bond strength between UHPC and normal strength concrete (NSC) substrate with varying surface textures. Tests were also conducted to assess the early-age and longer-term shrinkage behavior and coefficient of thermal expansion of the UHPC as well as rapid chloride permeability testing. Good bond between UHPC and NSC substrate was observed even with inadequate surface texture. Combined shrinkage and thermal effects were investigated for …

The Professional Constructor, Full Issue, Volume 43, Number 02

The Professional Constructor

No abstract provided.

Numerical Modeling Of Submarine Minibasin Flow And Morphodynamics, Elena Bastianon

Theses and Dissertations

Intraslope basins, or minibasins, are important morphological features of the continental slope in both modern and ancient sedimentary systems. Minibasins have an elliptical or spherical shape with a steep inlet or proximal zone followed by an almost horizontal basin floor, and an overflow zone near the downstream basin lip. These basins are filled with sediment transported by successive events of turbidity currents and other types of submarine flows. The work presented here focuses on turbidity current sedimentation in intraslope minibasins, which is often described in terms of the ‘fill-and- spill’ conceptual model. The ‘fill-and-spill’ model has been used previously to …

Characterization Of The Spatial And Temporal Changes In River Geometry And Sand Load With Field Data Analysis And 1d Numerical Modeling, Zeyad Ayoob Sulaiman

Theses and Dissertations

The quantification of the changes in channel geometry and sand load that have occurred on the Missouri River after engineering works and that characterize the Altamaha River in the fluvial-tidal transition zone is the main objective of this research. Dam construction and channelization on the Missouri River resulted in flow regulation, sediment shortage by dam reservoir trapping, channel straightening and narrowing. Quantifying the morphodynamic response of the Lower Missouri River to these engineering projects at short and long-time scales is a difficult problem that we approach with the analysis of the available field data and with the aid of a …

The Restoration Of The Nile River And Its Delta, Egypt. Numerical Modeling, Basim Mohammed Naseef Al-Zaidi

Theses and Dissertations

The construction of the High Aswan Dam significantly reduced the flood flows and the sediment supply to the Egyptian portion of the Nile River. Consequences of this changes in river hydrology are diffuse channel bed erosion in the upstream part of the river, in- channel sedimentation in the downstream part of the system, delta recession, habitat deterioration, wetlands loss, water pollution, and environmental problems. The feasibility of a Nile River-Delta restoration project with controlled flow releases and sediment augmentations at Aswan is here investigated with the aid of site-specific one-dimensional morphodynamic models. The water source for the restoration project, based …

Shear Strength Characteristics And Failure Mechanism Of Slopes In Overconsolidated Soils Of Nebraska, Hossein Bahmyari

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Geotechnical engineers deal with some challenging problems when encountering long-term slope stability in overconsolidated clays and clayey shales. One of these problems is determining a suitable method to estimate the reliable shear strength of overconsolidated clayey soils for long-term slope stability. According to Eversol (2013), one half of the counties in Nebraska have experienced slope failure in overconsolidated soils, especially in north and east Nebraska. In this research, shear strength characteristics of overconsolidated clayey soils of Nebraska is investigated in regard to long-term stability of slopes, and the failure mechanism in such soils is examined.

Undisturbed samples from boring logs …

Does Length Of Ride, Gender Or Nationality Affect Willingness To Ride In A Driverless Ambulance?, Stephen Rice, Scott R. Winter, Rian Mehta, Joseph R. Keebler, Bradley S. Baugh, Emily C. Anania, Mattie N. Milner

Publications

Due to the frequent lack of ambulances and personnel, the purpose of this study was to examine consumers’ willingness-to-ride in an ambulance that was either driven by a human driver or completely automated (with no human driver) based on the gender of the participant and their nationality, either Indian or American. A two-study experimental design was utilized using over 1,000 participants. In Study 1, the length of the ride and the type of driver were manipulated while in Study 2, the length of the ride was manipulated across genders and nationality. Study 2 also collected affect measures to complete a …

Thermal Bridging In Concrete Sandwich Walls, Taylor J. Sorensen, Robert J. Thomas, Sattar Dorafshan, Marc Maguire

Faculty Publications

Energy efficiency requires continuity of the insulation system in structural and architectural details.

Analysis And Redesign Of I-680 And Mission Boulevard Interchange, Melissa Elian-Carrillo

Civil, Environmental and Sustainable Engineering Senior Theses

The existing four cloverleaf design of the I-680 Mission Boulevard Interchange in Fremont, California, was analyzed at merge, diverge, basic, and weaving freeway segments. After the traffic analysis of all the segments, the critical segment for redesign was the merge segment of I-680 South to Mission Boulevard westbound, due to a failing Level of Service. Over a span of 17 years (2018-2035) a comparison of the current condition and the redesign was executed for crashes, congestion, air pollution, noise, greenhouse gases, and required road facilities and traffic services. The construction costs of the redesign as well as aesthetic, health, disaster …

Experimental Tests And Numerical Simulations For Failure Investigation On Corrugated Boxes Used On Household Appliance Packaging, Diego Fernandes Rodrigues, José Carlos Pereira

Journal of Applied Packaging Research

Packages made of corrugated paper are fundamental to the protection, transportation and handling of the appliance product market. During the storage and sales stages of a product, the package must resist compressive loads in different directions beyond moderate impacts. In this context, the objective of this work is to develop and implement a post-processor that allows the simultaneous analysis of two of the most common failure modes of packages made of corrugated paper: failure due to tensile or compressive stress limit, and failure due to local buckling, when the buckling of the faces of the corrugated paper between two peaks …

Field Instrumentations And Numerical Analysis Of Geosynthetic Reinforced Soil – Integrated Bridge System (Grs-Ibs), Allam Ardah

LSU Doctoral Dissertations

Geosynthetic reinforced soil (GRS) is a special soil with geosynthetic fabric closely stacked in layers as soil stabilization and considered an alternative design method to the conventional bridge support technology. In this research study, a field case study of Maree Michel bridge, which is located in Route LA 91 Vermilion Parish in Louisiana, was instrumented with six different types of instrumentations to monitor the performance of GRS-IBS bridge abutment and to develop 2D and 3D finite element models. The instrumentations include Shape Acceleration Array (SAA), earth pressure cells, strain gauges, piezometers, and thermocouples. Additionally, surveying was conducted at the bridge …

Managing Diffuse Phosphorus At The Source Versus At The Sink, Katrina A. Macintosh, Brooke K. Mayer, Richard W. Mcdowell, Stephen M. Powers, Lawrence A. Baker, Treavor H. Boyer, Bruce E. Rittmann

Civil and Environmental Engineering Faculty Research and Publications

Judicious phosphorus (P) management is a global grand challenge and critical to achieving and maintaining water quality objectives while maintaining food production. The management of point sources has been successful in lowering P inputs to aquatic environments, but more difficult is reducing P discharges associated with diffuse sources, such as nonpoint runoff from agriculture and urban landscapes, as well as P accumulated in soils and sediments. Strategies for effective diffuse-P management are imperative. Many options are currently available, and the most cost-effective and practical choice depends on the local situation. This critical review describes how the metrics of P quantity …

Map Based Discovery Of Hydrologic Data In The Hydroshare Collaboration Environment, Zhaokun Xue, Alva Couch, David G. Tarboton

Civil and Environmental Engineering Faculty Publications

Data discovery refers to the process of locating pre-existing data for use in new research. In the HydroShare collaboration environment for water science, there are more than twenty kinds of data that can be discovered, including data from specific sites on the globe, data corresponding to regions on the globe, and data with no geospatial meaning, such as laboratory experiment results. This paper discusses lessons learned in building a data discovery system for HydroShare. This was a surprisingly difficult problem; default behaviors of software components were unacceptable, use cases suggested conflicting approaches, and crafting a geographic view of a large …

Physical Modeling Of Flow Nets In Groundwater And Determination Of Hydraulic Conductivity, Hannah Nicholas, Moses Karakouzian

AANAPISI Poster Presentations

The goal of this study is to physically model the paths that water particles take through soil, and estimate hydraulic conductivity for several soil configurations. Water paths, or flow lines, are shown by injecting dye into sand contained in a rectangular acrylic glass tank with a vertical barrier in the center; water is poured on one side of the tank and a pump is used to maintain constant head loss. If flow lines are formed, a flow net is to be drawn using photos of the tank and hydraulic conductivity is to be calculated.

This project consists of four phases: …

Coir Fiber Reinforced Concrete, Jose De La Serna, Moses Karakouzian

AANAPISI Poster Presentations

This poster exhibits the testing and research done on general Portland Cement Concrete with the addition of coir (coconut) fibers as reinforcement. Using the fundamental constituents of cement (water, cement, fine and coarse aggregate) and processed coir fiber, concrete specimens were batched to test for compressive and flexural strengths (per appropriate ASTM standards). Cylindrical and rectangular beam specimens were subjected to loadings until failure occurred. The capacity and modes of failures of the specimens were observed. It was determined that:

• The addition of processed coir fibers decreases the overall strength of general Portland Cement Concrete. • The tested concrete’s …

Some Aspects Of Studying The Structure Of Construction Materials By The Method Of Mercury Purometry, Anvar Ishanovich Adilkhodjayev, I.A. Kadirov

Journal of Tashkent Institute of Railway Engineers

The article gives a classification of methods for controlling the porous structure of materials. The parameters of the porosity of aerated concrete were investigated by the method of mercury porosimetry. The method of mercury porosimetry is based on the fact that a liquid that does not wet a solid penetrates into its pores only when exposed to external pressure. The total porosity of aerated concrete according to mercury porosimetry is 49.28%