Civil and Environmental Engineering Commons^™

Aerodynamic Flutter And Buffeting Of Long-Span Bridges Under Wind Load, Shuqian Liu

LSU Doctoral Dissertations

With the continuous increase of span lengths, the aerodynamic characteristics of long-span bridges under external wind excitation have become much more complex and wind-induced vibration has always been a problem of great concern. The present research targets on the aerodynamic performance of long-span bridges under wind load with an emphasis on bridge flutter and buffeting.

For the aerodynamic flutter analysis of long-span bridges, the present research investigated the effects of the wind turbulence on flutter stability. The characterizations of the self-excited forces are presented in both the frequency-domain and in the time-domain, and the flutter analysis is conducted under both …

Quantitative Evaluation Of A Lightweight Sediment For A Physical Model Of The Lower Mississippi River, Mauricio Hooper

LSU Doctoral Dissertations

The Lower Mississippi River Physical Model (LMRPM), housed at the LSU Center for River Studies on the Baton Rouge, LA Water Campus, is a distorted, movable bed model comprising the lower 195 miles of the Mississippi River from Donaldsonville through the Head of Passes into the Gulf of Mexico. Since the LMRPM was designed to replicate the hydraulics (i.e., flow and river stages) and bulk non-cohesive sediment transport, the model lightweight sediment must replicate both the incipient motion and two-dimensional dune characteristics (height and length). In addition, the model scale and distortion require that the sediment time scale be determined …

Unified Strength Model Of Asphalt Mixture Under Various Loading Modes, Chengdong Xia, Songtao Lv, Lingyun You, Dong Chen, Yipeng Li, Jianlong Zheng

Department of Civil, Environmental, and Geospatial Engineering Publications

Although the rutting resistance, fatigue cracking, and the resistance to water and frost are important for the asphalt pavement, the strength of asphalt mixture is also an important factor for the asphalt mixture design. The strength of asphalt mixture is directly associated with the overall performance of asphalt mixture. As a top layer material of asphalt pavement, the strength of asphalt mixture plays an indispensable role in the top structural bearing layer. In the present design system, the strength of asphalt pavement is usually achieved via the laboratory tests. The stress states are usually different for the different laboratory approaches. …

Model Of A Sulfur-Based Cyclic Denitrification Filter For Marine Recirculating Aquaculture Systems, Zhang Cheng

USF Tampa Graduate Theses and Dissertations

Recirculating aquaculture systems (RAS) are a type of near zero-discharge fish production system that is used to treat and recirculate aquaculture wastewater and increase the biomass stocking density in the fish tank. The RAS presented in this thesis was a marine system which was operated with two temporally independent cycles, Loop 1, a continuous loop, and Loop 2, an intermittent loop. Flow in the RAS was switched between the two loops by a solenoid valve. During the operation of Loop 1, components involved in the cycle were successively the fish tank for fish production, solids filters for solids removal and …

Estimation Of Number Of People Living In Developing Countries That Received Water From A Spring Source, Prapti Shinde

USF Tampa Graduate Theses and Dissertations

In the year 2000, 170 countries decided to stand together and solve some primary and common global problems like poor health, water, and sanitation. Obtaining access to safe drinking water is every individual’s right. The UN defines safe drinking water as “the water required for each personal or domestic use must be safe, therefore free from micro-organisms, chemical substances and radiological hazards that constitute a threat to a person's health” (UNDESA, 2014). This thesis focuses on identifying the number of people who potentially receive spring water from a piped source in rural mountainous areas. There are three significant steps and …

Multinomial Logit Analysis Of Injury Severity In Crashes Involving Emotional Drivers, Kristen Hubbert

Research Horizons Day Posters

No abstract provided.

Removal And Recovery Of Nutrients From Wastewater In Urban And Rural Contexts, Kevin Daniel Orner

USF Tampa Graduate Theses and Dissertations

Efforts to remove and recover nutrients from wastewater are motivated by the United Nations Sustainable Development Goals and the National Academy of Engineering Grand Challenges of Engineering. Of the seventeen Sustainable Development Goals (SDGs), multiple SDGs relate to managing nutrients in wastewater. SDG 6, which is to “ensure availability and sustainable management of water and sanitation for all,” contains targets that aim to improve water quality by reducing pollution, halve the amount of untreated wastewater released to the environment, and increase recycling and safe reuse of wastewater (UN, 2017). SDG 2 seeks to improve food security and SDG 12 seeks …

Development And Application Of Decision-Making Tool For Rural Spring-Sourced Gravity-Fed Community Managed Water Systems, Oswaldo Galicia

USF Tampa Graduate Theses and Dissertations

People all over the world still lack access to safe drinking water service. Those with access experience several issues during the first few years of installation that impede on their overall access. In order to improve water services, not only is a proper decision-making tool necessary, taking into account key factors that impact sustainable water service, but proper monitoring and evaluation is also important in ensuring service for the long term. There are several developed assessment tools used for monitoring and evaluation of water systems post-construction, applicable in various scenarios. However, there are only few tools available to facilitate the …

Behavior Of Non-Ductile Slender Reinforced Concrete Columns Retrofit By Cfrp Under Cyclic Loading, Wisam Amer Aules

Dissertations and Theses

In the Middle East region and many countries in the world, older reinforced concrete (RC) columns are deemed to be weak in seismic resistance because of their low amount of reinforcement, low grades of concrete, and large spacing between the transverse reinforcement. The capacity of older RC columns that are also slender is further reduced due to the secondary moments. Appropriate retrofit techniques can improve the capacity and behavior of concrete members. In this study, externally bonded Carbon Fiber Reinforced Polymer (CFRP) retrofit technique was implemented to improve the behavior of RC columns tested under constant axial load and cyclic …

Evaluation Of Photogrammetry And Inclusion Of Control Points: Significance For Infrastructure Monitoring, Renee Oats, Rudiger Escobar-Wolf, Thomas Oommen

Department of Civil, Environmental, and Geospatial Engineering Publications

Structure from Motion (SfM)/Photogrammetry is a powerful mapping tool in extracting three-dimensional (3D) models from photographs. This method has been applied to a range of applications, including monitoring of infrastructure systems. This technique could potentially become a substitute, or at least a complement, for costlier approaches such as laser scanning for infrastructure monitoring. This study expands on previous investigations, which utilize photogrammetry point cloud data to measure failure mode behavior of a retaining wall model, emphasizing further robust spatial testing. In this study, a comparison of two commonly used photogrammetry software packages was implemented to assess the computing performance of …

Seismic Behavior Of Screen Grid Core Insulated Concrete Form Walls, Anwer Sabah Mohammed Mohammed

Dissertations and Theses

The use of the insulated concrete form (ICF) walls in residential buildings has increased over the past few decades. Much research has been conducted to evaluate the lateral strength of these walls by applying monotonic and cyclic loadings. In the current study, full-scale shake table experiments were employed to evaluate the in-plane behavior of four screen grid insulated concrete form (SGICF) walls. The first two wall specimens utilized dry fit insulated form blocks made from recycled expanded polystyrene granules that were bonded together with cement. When stacked, the cavities in the blocks formed a grid of cores that are evenly …

Evaluation Of Strand To Grout Bond In Post-Tensioned Tendons With Corrosion Inhibiting Penetrants, Kurt Kupselaitis

USF Tampa Graduate Theses and Dissertations

Post tensioning bridges is an efficient way of construction where segments of a bridge are strung together using small diameter high strength strands. The steel strands are passed through internal and/or external ducts within the concrete segments, jacked to high levels of stress, anchored using steel wedges, and then filled with a corrosion inhibiting filler. A cementitious material called grout has been widely used for over 50 years as this filler. The Federal Highway Administration design and construction manual provides recommendations in the properly filling techniques to ensure the tendons are full of grout. Despite the level of detail the …

Civil Engineering And Construction News, Georgia Southern University

Civil Engineering & Construction: News & Publications (2011-2022)

• Dr. David W. Scott named Chair, Department of Civil Engineering & Construction

Adsorption Of Organic Micropollutants Onto Biochar: A Review Of Relevant Kinetics, Mechanisms And Equilibrium, Yiran Tong, Patrick J. Mcnamara, Brooke K. Mayer

Civil and Environmental Engineering Faculty Research and Publications

As an alternative to activated carbon, biochar has been considered for removal of organic micropollutants from water and wastewater via adsorption. This review elaborates on the fundamental basis of adsorption kinetics, mechanisms, and equilibrium with respect to biochar-based adsorption of micropollutants. The objectives include: 1) linking biochar surface properties with adsorption abilities, 2) categorizing the kinetics of adsorption of aqueous-phase organic compounds onto biochar, 3) categorizing the molecular-scale interactions between organic micropollutants and biochar, and 4) reviewing existing quantitative methods for characterizing adsorption equilibrium of organic micropollutants from water onto an adsorbent surface. To fulfill these goals, the relationships among …

Iron Mediated Organic Preservation In A River Influenced Continental Margin, Neha Ajit Ghaisas

LSU Doctoral Dissertations

Continental margins such as the Mississippi river influenced Louisiana shelf (MIS), are important land-ocean interfaces where excessive water column productivity and rapid burial results in large amounts of organic carbon (OC) being sequestered in the sediments. The preservation of OC in sediments is controlled by a number of processes among which mineral-OC interactions are considered to be more important. Specifically, the interactions between sediment iron (Fe) species and OC have been shown to promote carbon preservation. However, the exact nature of preservation mechanism is not well understood and is based on limited global data, which specifically lacks estimates from large …

High Friction Surface Treatment Initiatives By Indot: Spec Development, Joseph Bruno

Purdue Road School

In-House Project Design, Special Provision Specification, and Initial Test Results—Highfriction surface treatment (HFST) has been proactively utilized as a cost-effective solution to reducing vehicle crashes at curves across the country. As an initiative, INDOT is currently installing HFST at 26 locations statewide, mainly horizontal curves with high crash rates. This session consists of two presentations to share the information on the development, expected benefits, project design, and initial test results based on the HFST at these locations.

Rough Roads Ahead!?, Sarah Reed, Brooke Thomas, Jim Hellmann

Purdue Road School

Have you ever found yourself in the public's cross-hairs when it is time to implement a few roadway improvements? Are you handicapped in your ability to describe the true value of community planning and economic development planning? Come hear from one dynamic trio with the ability to identify issues and opportunities that others might not see and work to uncover even more ways tin which we are better together.

Latex Modified Concrete - Very Early Strength, Bobby Steele

Purdue Road School

INDOT came out with specifications for a very early strength concrete to use on bridge deck overlays. This concrete is fast setting, which allows overlays to be performed over a weekend and benefits the traveling public with a short duration of traffic interference. Cure time to reach the strength requirement is 3 hours. E&B Paving performed the first application with the new spec on August 26, 2018. Many changes were also made to the INDOT Specification Section 722.

Battery-Free Wireless Strain Measurement Using An Antenna Sensor, Yang Wang

INSPIRE Archived Webinars

A battery-free antenna sensor can wirelessly measure strain on a structure. Bonded to the surface of a base structure, the antenna sensor deforms when the structure is under strain, causing the antenna’s electromagnetic resonance frequency to change. This resonance frequency change can be wirelessly interrogated and recorded by a reader through electromagnetic backscattering. A radio frequency identification (RFID) chip on the sensor harnesses a small amount of energy from the interrogation signal and responds to the reader. The resonance frequency change identified by the reader is then used to determine the strain applied on the structure. The latest antenna sensor …

Use Of Penetrating Asphalt Emulsions To Address High-Void Pavement Areas, Andrew Eicher, Curt Higginbotham

Purdue Road School

Longitudinal joints are high in air voids due to compaction limitations. Lowering the void content of these areas improves the durability of the pavement. Project data indicate that rapid penetrating emulsion (RPE) fills the voids beneath the surface of the pavement, reducing air and water intrusion while maintaining surface texture, whereas traditional emulsions seal the surface only. Lab tests have been developed to quantify the penetrating ability of an emulsion and resistance to water exposure. Join us for a discussion.

Safety Improvements At Horizontal Curves, Joseph Bruno

Purdue Road School

This presentation highlights the progress INDOT has made in improving safety at horizontal curves by upgrading the signing and delineation and by applying high friction surface treatments at some locations. We will also discuss the MUTCD (Manual on Uniform Traffic Control Devices) requirements for signing horizontal curves and the approaching (December 31, 2019) FHWA target date for compliance.

Microwave Self-Healing Technology As Airfield Porous Asphalt Friction Course Repair And Maintenance System, Amir Tabakovic, Declan O'Prey, Drew Mckenna, David Woodward

Research and Innovation - Articles

A problem increasingly faced by airport authorities is the maintenance of runways. Due to their large aircraft loadings associated with take-off and landing operations, runways experience surface deterioration. Poor quality runway surfaces cannot be tolerated in such an environment. Maintenance issues must be carried out to maximise safety and minimise the risk of aircraft damage. A recent development has been the introduction of self-healing technologies such as rejuvenator encapsulation, induction and microwave heating to address these issues. This paper summarises a laboratory investigation to determine the effectiveness of microwave self-healing for crack repair of Porous Friction Course (PFC) used for …

Leveraging Telematics And Weather Data To Study The Productivity Of Roadside Mowers, Jijo K. Mathew, Matt Kraushar

Purdue Road School

Mowing activities are usually reported by daily work orders and it is difficult to obtain quantitative information characterizing the utilization and productivity of the mowing operations. This research uses telematics data from commercial sensors to track the daily activity of seven mowers in the Fort Wayne district. Weather data from NOAA was also captured to estimate the weather related delays. During a one-month period, the mowers collectively covered a total of around 1170 miles and an area of nearly 1800 acres of mowing. Crews worked alternative work schedules with extended hours four days a week. On an average 9.5 hour …

Coupling Computational Fluid Dynamics Simulations And Statistical Moments For Designing Healthy Indoor Spaces, Shamia Hoque, Firoza B. Omar

Faculty Publications

Cross-contamination between occupants in an indoor space may occur due to transfer of infectious aerosols. Computational fluid dynamics (CFD) provides detailed insight into particle transport in indoor spaces. However, such simulations are site-specific. This study couples CFD with statistical moments and establishes a framework that transitions site-specific results to generating guidelines for designing “healthy” indoor spaces. Eighteen cases were simulated, and three parameters were assessed: inlet/outlet location, air changes per hour, and the presence/absence of desks. Aerosol release due to a simulated “sneeze” in a two-dimensional ventilated space was applied as a test case. Mean, standard deviation, and skewness of …

Improving Access To Clean Water Through Service Learning, Rachel E. Gehr, Tolu Odimayomi, Carolina Tornesi Mackinnon

Engagement & Service-Learning Summit

No abstract provided.

Safety Standards Must Be Met For Fire Fighting In Educational Workshops In Industrial Secondary Schools In The Arab Republic Of Egypt, Ibrahim Mahmoud Hassan, Wael Ahmed Rady, Walid Mahmoud El-Nahas

Emirates Journal for Engineering Research

The aim of the research is to establish safety standards for fire fighting within educational workshops in industrial secondary schools to determine the structural requirements for designing workshops in educational buildings and meet international standards. To achieve this a questionnaire was made and data collected for analysis and hypothesis testing using the statistical package of social Sciences (SPSS). Through the adoption of a number of different statistical methods and after conducting the analysis of research data and testing its hypotheses find a number of results, most importantly that the standards conform to international and local standards . The results also …

Exploring Boarding Strategies For High-Speed Railway, Tie-Qiao Tang, Yi-Xiao Shao, Liang Chen, Hai-Jun Huang, Ziqi Song

Civil and Environmental Engineering Faculty Publications

In light of the increasing demand for passenger transportation on high-speed railway (HSR), the pedestrian flow at HSR stations has become quite crowded in many countries, which has attracted researchers to study the HSR boarding behavior. In this paper, we propose three boarding strategies based on the features of the boarding behavior at an origin HSR station; we then use a cellular automaton (CA) model to study the impacts of boarding strategies on each passenger’s motion during the boarding process at HSR station. The simulation results indicate that some of the three strategies can optimize some passengers’ boarding time and …

Quantifying The Impact Of Weather Events On Travel Time And Reliability, Xu Zhang, Mei Chen

Kentucky Transportation Center Faculty and Researcher Publications

It is of practical significance to understand the specific impact of weather events on the operating condition of the surface transportation system so that proactive and reactive strategies can be quickly implemented by transportation agencies to minimize the negativity resulted from adverse weather events. Many studies have been conducted on quantifying such effects yet suffer from limitations such as subjectively defining a time window under uncongested conditions and not being able to account for the severe impact from weather events which result in travel time unreliability. To overcome those shortcomings in existing literature, an integrated data mining framework based on …

A Correlation Network Model For Managing Safety And Performance Issues In Bridges And Civil Infrastructures, Prasad Chetti

UNO Student Research and Creative Activity Fair

Many recent studies have shown that a large percentage of bridges in many parts of the world have low safety rating. National Bridge Inventory (NBI) database contains the information of more than 600,000 bridges, where each bridge has 116 parameters. Current safety inspections require bridge inspectors to manually inspect each bridge every few years. Manpower and budget constraints limit such approach from inspecting the bridges more frequently. Clearly, more efficient approaches need to be developed to improve the process of bridge inspection and increase the overall safety of bridges and civil infrastructures. In this study, we propose a Correlation Network …

Evaluation Of Wind And Solar Energy Investments In Texas, Byungik Chang, Ken Starcher

Civil Engineering Faculty Publications

The primary objective of the project is to evaluate the benefits of wind and solar energy and determine economical investment sites for wind and solar energy in Texas with economic parameters including payback periods. A 50 kW wind turbine system and a 42 kW PV system were used to collect field data. Data analysis enabled yearly energy production and payback period of the two systems.

The average payback period of a solar PV system was found to be within a range of 2-20 years because the large range of the payback period for PV systems were heavily influenced by incentives. …