Civil and Environmental Engineering Commons^™

Fatigue And Healing Performance Of Asphalt Materials Modified With Nanomaterials And High-Polymer Asphalt Binders, Samuel M. Addai

Theses and Dissertations

Fatigue cracking is one of the primary distress mechanisms affecting asphalt pavement durability under repeated traffic loading and environmental aging. Although asphalt binders possess an inherent ability to heal micro-damage during rest periods, this healing capacity is often insufficient to fully counter progressive fatigue damage under field conditions. This thesis investigates the fatigue and self-healing behavior of asphalt binders and mixtures modified with nanomaterials and advanced polymer-based systems. Nanomodified binders were evaluated using Linear Amplitude Sweep (LAS) and Linear Amplitude Sweep with Healing (LASH) tests within the VECD framework to quantify fatigue resistance and healing behavior under different rest periods …

Transport Properties And Microstructural Development Of Co₂-Cured, Co₂-Infused, And Cold-Weather Concrete, Arlene Jane Looc

Theses and Dissertations

This research aims to advance the understanding of durability and transport behavior in emerging CO₂-cured and cold-weather concrete technologies. Limited work has examined long-term durability indicators such as permeability, resistivity, and pore connectivity in these types of concrete. To bridge this gap, the study evaluates transport properties alongside microstructural changes that govern the progression of hydration and the evolution of pore structure. This study measures transport properties, determines correlations between resistivity and fluid ingress, and analyzes the evolution of pore structure. To achieve this, the experimental program evaluated three concrete mixtures for external CO₂ exposure, nine for dry ice infusion, …

Performance Evaluation And Sustainable Benefits Of Using Metakaolin And Recycled Steel Fibers In Concrete, Lova Raju Surla, Ramprasad Naik Desavathu, Raja Murugadoss Jeyaraju

Journal of Sustainable Construction Materials and Technologies

The rapid accumulation of waste vehicle tires and the increasing demand for cement pose significant environmental challenges through land pollution and CO2 emissions. The combined use of recycled steel fibers (RSFs) recovered from waste tires and supplementary cementitious materials (SCMs) offers a sustainable solution to these issues. This study investigates concrete incorporating 20% fly ash (FA), varying metakaolin (MK) contents (4–16%), and RSF dosages of 0.5–1.5%. Mechanical properties (compressive, split tensile, and flexural strengths) and durability characteristics (sorptivity, water absorption, chloride permeability, and homogeneity) were evaluated at 7, 28, and 90 days. Results showed that the mixture containing 20% FA …

Climate-Responsive Design For Sustainable Construction: Passive Strategies In Domestic Architecture Supporting Sustainability, Nahed Chakouf

Journal of Sustainable Construction Materials and Technologies

This study explores climate-responsive design in domestic architecture, focusing on the application and effectiveness of passive strategies across various climatic regions, including the UK, hot-arid, tropical, and cold climates. A qualitative comparative case study method was used to explore different passive design strategies, integration of sustainability, procurement, the coordination of stakeholders, and compliance with regulations in residential architectural projects under varying climate conditions. Drawing from a combination of historical case studies and original architectural projects, the research evaluates how spatial configuration, material selection, solar orientation, shading, ventilation, and insulation are optimized to achieve thermal comfort and energy efficiency. In temperate …

Investigation Of Energy Efficiency Of An Autonomous Mobile Photovoltaic-Thermal (Pv/T) System With A Polycarbonate Absorber, Sanjar Kodir Ugli Shoguchkarov, Anvar Rakhmat Ugli Rakhmatov, Rushana Husen Kizi Abdullaeva, Orazbek Maratbay Ugli Temirbaev

Technical science and innovation

This study analyzes the enhancement of energy efficiency in photovoltaic-thermal (PV/T) systems, which enable the simultaneous generation of electrical and thermal energy from solar radiation. The research focus is an autonomous mobile unit based on multi-channel polycarbonate heat collectors with a hydraulic diameter of 8 mm, characterized by their lightweight nature and superior corrosion resistance compared to conventional metal absorbers. Experimental investigations were conducted at the solar testing field of the Physical-Technical Institute of the Academy of Sciences of Uzbekistan under extreme continental climatic conditions to determine the system's stable thermophysical indicators. The results demonstrated that active water cooling using …

Use Of New Improved Methods For Assessing The Engineering-Geological Characteristics Of Deposits By Depth (Using The Example Of The Akba Deposit)., Elboy Shavkatovich Qurbonov Salom, Abduboqib Djalilovich Karimov, Yokub Yarash Ugli Isomiddinov

Technical science and innovation

The article examines the fracturing and filtration properties of rocks in boreholes, rock outcrops, and underground mine workings at the Akba gold deposit. Based on the results of hydrogeological and engineering-geological studies, methods that fully meet modern requirements were used, the values of the RMR rating of rocks and the indicators of the qualitative content of RQD rocks, as well as the intervals of their changes, were studied, as a result of which it became possible to quickly and accurately assess the strength state of the rock mass of the deposit territory by depth and area.

Modeling Of Terpolymerization Kinetics And Determination Of Reactivity Ratios In The Tdma–Styrene–Maleic Anhydride System, Shohrux Boboxon Ugli Mavlonov, Sadriddin Fayzullayevich Fozilov

Technical science and innovation

In this study, the kinetics of terpolymerization, compositional evolution, and monomer reactivity ratios in the TDMA–styrene–maleic anhydride system were comprehensively investigated. Increasing the initiator concentration from 16.8×10⁻⁶ to 51.3×10⁻⁶ mol•L⁻¹ led to an increase in conversion from 6.4% to 15.2% and reaction rate from 4.075×10⁻⁶ to 8.965×10⁻⁶ mol•L⁻¹•s⁻¹. At low conversion (Xw≈0.02–0.09), the terpolymer composition remained close to the initial feed, although deviations due to differences in monomer reactivity were observed. With increasing conversion, some systems exhibited stable composition (±0.02), while others showed compositional drift (increase of MA fraction from 0.50 to 0.70). The determined reactivity ratios (rTDMA/St≈0.99; rSt/TDMA≈1.62; rTDMA/MA≈2.02; …

Development Of An Optimal Composition Of A Composite Solvent For Asphalt–Resin–Paraffin Deposits, Gulmira Abduvaliyevna Tadjiyeva, Xasan Irgashevich Kadirov, Shaxnoza Abduvaliyevna Tadjiyeva, Fazliddin Zokir Ugli Murodullayev, Bekmurodjon Baxtiyorjon Ugli Raximjonov

Technical science and innovation

A solvent formulation composed of aromatic hydrocarbons of the C9 fraction and aliphatic alcohols in a 1:1 ratio, supplemented with 1–3 wt.% of a nonionic surfactant, has been developed. The proposed composition demonstrates more than a twofold increase in dissolving and washing efficiency toward paraffin-type asphaltene–resin deposits. Furthermore, the solvent system exhibits pronounced depressant–dispersant properties with respect to paraffin-containing organic deposits. Although numerous investigations have addressed the development of technologies for removing organic deposits in oilfield equipment—primarily focusing on specific aspects of eliminating or preventing asphaltene–resin–paraffin deposits (ARPD) in wells—limited attention has been given to the design of integrated approaches. …

Technology For Obtaining Aliphatic Amines Based On Liquid By-Products Of Polymerization Processes, Kamila Sabirbaevna Allanazarova, Ulugbek Komiljonovich Urinov

Technical science and innovation

Polymerization processes generate considerable amounts of liquid secondary by-products, which are often underutilized despite their significant chemical potential. Addressing the need for sustainable resource use, this study aims to develop a technological method for converting these by-products into valuable aliphatic amines. The experimental approach involved the pre-treatment of liquid polymerization by-products through fractional distillation to isolate C3–C10 fractions, followed by catalytic amination using Raney nickel under controlled temperature (160°C) and pressure (12 atm) conditions. Analytical methods including gas chromatography-mass spectrometry (GC-MS) and Fourier-transform infrared spectroscopy (FTIR) were employed to characterize the reaction products. The results demonstrated the successful formation of …

Adaptive – Compositional Method For Coordinating Subsystems At Different Levels In Hierarchical Control Systems, Husan Zakirovich Igamberdiyev, Uktam Farxodovich Mamirov Mr, Inomjon Ilxom Ugli Abdukaxxarov Mr

Technical science and innovation

This paper examines the problem of synthesizing algorithms for the composition of subsystems at various levels within complex hierarchical control systems under conditions of uncertainty and resource constraints. It is demonstrated that classical composition algorithms, which rely on the intersection of admissible sets and the use of local optimality criteria, suffer from several significant drawbacks. These include a combinatorial increase in complexity, dependence on the expert selection of parameters, and limited applicability in dynamic environments. To overcome these shortcomings, an adaptive-compositional method is proposed. This method is based on the dynamic recalculation of coordination parameters, the integration of model predictive …

Calculation Of The Basic Parameters Of The Hybrid Power Plant (Hpu) On The Spark Car, Rustam Raximovich Tillahodjaev, Jamoliddin Pardaboy Ugli Turdiev

Technical science and innovation

This article presents one of the effective ways to improve fuel efficiency and reduce emissions of toxic substances, the use of internal combustion engines with the use of an electric drive in their designs. In recent years, two directions in the development of cars with electromechanical drives have been clearly identified, the first is the creation of a pure electric car, the second is the development of an electromechanical drive with a combined (hybrid) power plant. Due to the lack of efficient energy storage available for mass production, pure electric vehicles have relatively low mileage on a single charge. This …

Experimental Study Of An Automotive Cooling System With A Mechatronic Control System, Avaz Israilovich Yangibayev

Technical science and innovation

This article presents the results of experimental investigations of a passenger car engine cooling system equipped with a mechatronic control system. The experiments were conducted on an intelligent hardware-software laboratory test bench developed using original components of a Chevrolet Gentra vehicle. The study determined the thermodynamic response characteristics and energy performance of the system under varying ambient temperatures (-10 to +50 °C) and engine thermal loads. The experimental results demonstrated that the mechatronic system can maintain coolant temperature with minimal fluctuation amplitude, ensure smooth transient processes, and significantly reduce electrical energy consumption. Based on the obtained results, scientific and practical …

Human Cancer Genomes Harbor The Mutational Signature Of Tobacco-Specific Nitrosamines Nnn And Nnk, Michael Korenjak, Nuri Alpay Temiz, Stéphane Keita, Bérénice Chavanel, Claire Renard, Cécilia Sirand, Jiehong Guo, Et Al.

Michigan Tech Publications

BACKGROUND: Tobacco use is linked to multiple cancer types and a quarter of cancer deaths. Tobacco smoke contains numerous mutagenic chemicals such as polycyclic aromatic hydrocarbons (PAH), however, the mutagenicity of many chemicals in tobacco products remains underexplored. The tobacco-specific nitrosamines 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) and N'-nitrosonornicotine (NNN), both International Agency for Research on Cancer (IARC) Group 1 carcinogens, form pre-mutagenic pyridyloxobutyl (POB) DNA adducts, yet little is known about the associated genomic mutation landscape(s) in humans. METHODS: We applied bulk and error-corrected next-generation sequencing to a battery of experimental systems comprising mammalian cell lines and animals exposed to NNK or NNN, …

Project Prioritization For Near-Optimal Functionality Risk Reduction In Bridge Networks, David Y. Yang, Anteneh Deriba

Civil and Environmental Engineering Faculty Publications and Presentations

Bridge retrofit prioritization is commonly guided by structural vulnerability, traffic conditions, or indirect consequences following a single bridge failure. However, these metrics often fail to identify retrofit projects that maximally reduce system-level functionality risk, because they do not account for the consequences of joint failures among multiple bridges. This presentation develops a mathematically rigorous, gradient-based approach to bridge retrofit prioritization for achieving a near-optimal reduction in functionality risk. This risk is formulated as the expected increase in total travel time given probabilistic bridge survival or failure under external stressors such as earthquakes. By reinterpreting risk as the evidence term in …

Interpretable Deep Reinforcement Learning For Element-Level Bridge Life-Cycle Optimization, David Y. Yang, Seyyed Amirhossein Moayyedi

Civil and Environmental Engineering Faculty Publications and Presentations

The new Specifications for the National Bridge Inventory (SNBI), in effect from 2022, emphasize the use of element-level condition states (CS) for risk-based bridge management. Instead of a general component rating, element-level condition data use an array of relative CS quantities (i.e., CS proportions) to represent the condition of a bridge. Although this greatly increases the granularity of bridge condition data, it introduces challenges to set up optimal life-cycle policies due to the expanded state space from one single categorical integer to four-dimensional probability arrays. This study proposes a new interpretable reinforcement learning (RL) approach to seek optimal life-cycle policies …

Magnetic Field-Induced Transformation In Polycrystalline Ni2mnal Heusler Type Magnetic Shape Memory Alloy, Choji J. Daches, Joseph W. Newkirk, Mario Buchely, Laura N. Bartlett

Materials Science and Engineering Faculty Research & Creative Works

The martensitic and magnetic transformations, as well as the mechanical properties, of Ni₂MnAl alloys in as-cast (AC) and heat-treated (HT) conditions were investigated. Magnetic-field-induced strain was evaluated via magnetostriction, with reversible strains of 0.14% and 0.2% achieved in the martensitic phase at 2 K for the AC and HT alloys, respectively. Transformation temperatures and Curie temperatures were determined under constant applied magnetic field, revealing that γ-phase inclusions in the AC microstructure suppress antiferromagnetic domain response, yielding a lower magnetization (∼8.4 emu g⁻¹) compared to the HT alloy (∼13.4 emu g⁻¹). Both alloys exhibited hysteretic behavior in the martensitic state and …

Exact X2 Statistic Critical Values For Dice Fairness Testing, Warren Campbell

SEAS Faculty Publications

Two questions were addressed: 1) What are the exact values of the c² statistic critical values? 2. Does a dice tower offer improved fairness of dice rolls?  Critical values of the statistic asymptotically approach those given by the continuous chi-square distribution, but the exact distribution is discrete.  The exact distributions only asymptotically approach the chi-square distribution, and the convergence is slow (1/number of rolls).  Th exact distributions are a function of the number of rolls, the chi-square distribution is not a function of the number of rolls.  Exact values of c² at the 90, 95, and 99 percent …

Building Resilient And Sustainable Built Environments Through Climate Adaptation, Digital Innovation, And Infrastructure Governance, Mohammed Ali Berawi, Mustika Sari, Perdana Miraj

CSID Journal of Infrastructure Development

The built environment has become one of the most important arenas for responding to climate change, resource pressure, and rapid urban transformation. Cities, infrastructure networks, buildings, and construction projects are no longer expected only to provide physical services. They are also expected to reduce environmental impact, protect communities from disruption, support economic activity, and remain useful under uncertain future conditions. This expectation places resilience and sustainability at the center of infrastructure development.

Resilience refers to the capacity of built systems to anticipate shocks, absorb pressure, recover from damage, and continue functioning. Sustainability asks whether those systems can do so while …

Analysis Of The Suitability Of C-Band Radar-Based Rainfall Data With Rain Gauge Stations In The Upper Ciliwung Watershed, Indonesia, Daffa Aliyo Ghinannafsi, Evi Anggraheni, Muhammad Rizal, Peter Hartono Halim

CSID Journal of Infrastructure Development

Accurate rainfall estimation is essential for hydrological modelling and flood risk management, particularly in mountainous watersheds where rain gauge coverage is limited. This study evaluated the performance of a calibration correction method for C-Band radar rainfall estimates in the Upper Ciliwung Watershed using data from five rain gauge stations and 100 rainfall events. Data quality was verified through outlier and consistency tests before applying a daily calibration correction factor derived from gauge observations. Radar performance was evaluated using the Nash-Sutcliffe Efficiency (NSE), Percent Bias (PBias), and Root Mean Square Error (RMSE). Before correction, radar estimates substantially overestimated rainfall, with NSE …

Analysis Of Construction Safety Costs In Girder Erection Work On Toll Road Projects To Reduce Risks And Construction Accident Costs, Aditya Daniar Wicaksono, Rossy Armyn Machfudiyanto

CSID Journal of Infrastructure Development

The construction of toll roads, as part of Indonesia’s National Strategic Projects, plays a crucial role in enhancing mobility and economic competitiveness. Girder erection work constitutes one of the most critical phases in toll road bridge construction, characterized by high safety risks due to confined workspaces, technical complexity, and suboptimal risk management practices. This study aims to analyze construction safety costs in girder erection work to reduce risks and construction accident costs. The research process includes hazard identification, effective risk control analysis, risk impact valuation, and cost-benefit analysis of safety investments. The methods employed consist of secondary data analysis, risk …

Experimental Studies Of Compressive Strength Of Sustainable Concrete With Partial Cement Substitution Using Palm Oil Boiler Ash, Daral Suraedi, Jessica Sjah, Nuraziz Handika, Saffanah Fasya Aulia, Karmenita Olivia Edwardo

CSID Journal of Infrastructure Development

This study investigates the mechanical performance of sustainable concrete incorporating Palm Oil Boiler Ash (POBA) as a partial cement replacement. As the construction sector seeks to reduce CO₂ emissions and manage agro-industrial waste, POBA emerges as a promising supplementary cementitious material due to its pozzolanic potential and abundance in palm oil–producing regions such as Indonesia.Concrete specimens were prepared with POBA substitution levels ranging from approximately 10% to 30% by weight of cement, in combination with nanosilica and a polycarboxylate ether (PCE) superplasticizer to enhance performance. The mix design was developed in accordance with ACI 211 guidelines to maintain comparable workability …

Analysis Of Venture Capital Investment For Financing The Development Of The Palm Oil Industry In Indonesia For Private Companies, Salvatore Yitro, Mustika Sari, Gunawan Saroji

CSID Journal of Infrastructure Development

Indonesia is the world's largest crude palm oil (CPO) producer, accounting for 58.04% of global output from 2018 to 2022 and generating between USD 18.2 billion and USD 28.95 billion in annual foreign exchange earnings from 2016 to 2021. The downstream sector, however, remains largely controlled by foreign markets, and private companies face restricted access to conventional bank financing due to negative campaigns against Indonesian palm oil in European markets. No prior study has examined the financial feasibility of venture capital as a financing mechanism for integrated downstream palm oil development by private companies in Indonesia. This study analysed that …

Analysis Of Factors Influencing The Implementation Of Sustainable Project Management (Spm) In The Construction Industry In Indonesia, Ariq Farhan, Titi Sari Nurul Rachmawati

CSID Journal of Infrastructure Development

The construction industry contributes significantly to economic growth but also carries substantial environmental and social costs. Construction activities generate carbon emissions, consume natural resources, and produce large volumes of waste. Despite growing theoretical development of Sustainable Project Management (SPM) frameworks, empirical evidence on the actual level of SPM implementation in Indonesia's construction sector remains limited. This study aims to identify the factors that influence SPM implementation and measure the level of implementation as perceived by construction professionals. A quantitative survey was administered to 99 professionals across infrastructure, building, and industrial construction sectors in Indonesia. Data were collected through a Likert-scale …

Analysis Of The Implemetation Of Enterprise Resource Planning (Erp) Sap S/4 Hana In Cost Control Of Light Rail Transit (Lrt) Construction Projects, Rizki Zulkarnaini, Bernadette Detty Kussumardianadewi

CSID Journal of Infrastructure Development

Construction projects are expensive, complex, and difficult to keep on budget. Cost overruns are common. The consequences, including delays, disputes, and financial losses, appear repeatedly across the sector. Enterprise Resource Planning (ERP) systems have been widely adopted to address this challenge, but evidence on how SAP S/4HANA performs in Light Rail Transit (LRT) construction is limited. This study analyzed the critical success factors of SAP S/4HANA implementation and evaluated its effect on cost control performance in an LRT project in Jakarta. Data were collected from two sources: a questionnaire distributed to 50 respondents involved in the project, and cost records …

Unhsc Watershed Protection Standard Calculator, Daniel Macadam

UNH Stormwater Center

No abstract provided.

Explainable And Hybrid Machine Learning For Predicting Fatal Crash Risk, Hussein Khanjar, Abdolmajid Erfani

Michigan Tech Publications

Road traffic fatalities remain one of the most persistent public safety challenges, demanding predictive models that are not only accurate but also reliable and interpretable. While numerous machine-learning models have been developed for crash severity prediction, most remain limited in three critical dimensions: they simplify the unit of analysis by focusing only on the driver or the most severe occupant per crash, they emphasize predictive performance while neglecting model confidence and probability calibration, and they often function as black boxes lacking interpretability for real-world decision support. To address these gaps, this study proposes a calibrated hybrid machine-learning framework for nationwide, …

A Machine-Learning-Based Systematic Framework For Modeling Compression And Recompression Indices For Florida Soils, Michael Morales

Doctoral Dissertations and Master's Theses

This thesis develops a machine-learning framework for estimating the compression index and the recompression index of Florida soils from routinely measured index properties, and reports two studies that build it. Consolidation settlement design requires both indices, and both are obtained from the incremental-loading oedometer test, which occupies a specimen for one to two weeks; the index tests that accompany it are complete within hours. Empirical correlations have filled that interval since the 1950s, but their coefficients are calibrated on specific soil populations and transfer poorly between regions. The first study analyzes 376 consolidation tests compiled for the Florida Department of …

How Does Competitive Adsorption Between Vma And Pce Influence Yield Stress Of Cement Paste? A Novel Insight From Interparticle Forces And Percolation Threshold, Huamin Sun, Le Teng, Xiaohan Yu, Xin Shu, Zhangli Hu, Jiaping Liu, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Viscosity modifying admixture (VMA) and polycarboxylate superplasticizer (PCE) are often combined to optimize rheological properties of cement-based materials. However, the competitive adsorption of these complex admixtures can greatly influence rheological properties. Many studies have investigated the variation of yield stress due to competitive adsorption between VMA and PCE; but the mechanisms are not fully understood. This study aims to shed a new light on this question in cement paste systems prepared with low water-to-binder ratios of 0.16–0.30. The competitive adsorption of VMA and PCE was quantitatively assessed using the Total Organic Carbon and Ultraviolet-Visible Spectroscopy measurements. The effect of competitive …

Influence Of Stormwater Flooding Events On The Mobile County School District Student Population, Kadence Kali Johnston

Honors Theses

Mobile County, Alabama, receives among the highest annual rainfall totals in the United States resulting in frequent stormwater flooding that intersects with existing socioeconomic vulnerabilities. Within the Mobile County Public School System (MCPSS), 77% of students are economically disadvantaged and over 10% experience homelessness, creating heightened risk for educational disruption during flood events. This study investigates how stormwater flooding influences school attendance, closures, and academic performance across MCPSS, providing insight into how climate-driven hazards exacerbate educational inequities. The research integrates flood frequency, school performance metrics, and GIS flood-zone mapping and teacher perceptions to understand how flooding affects student learning opportunities. …

Managing Risks Under Nuclear Power Plant Projects: A Latent Similarity-Guided Contract Customization, Mariam Elazhary, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Global energy is transforming, with nuclear power emerging as a pivotal player in achieving sustainable and low-carbon energy goals. The nature of nuclear technology introduces unique challenges, such as stringent safety and environmental requirements. Existing studies focus on general risk identification, such as supply chain delays, cost overruns, and public perception issues. However, these studies fail to address integrating these risks into tailored contractual provisions, which are critical for navigating the unique challenges of nuclear projects. The goal of this paper is to examine how standard construction contracts can be tailored to better accommodate the risks inherent in nuclear power …