Civil and Environmental Engineering Commons^™

Tiny Home Retail, Shane M. Simpson

Construction Management

Tiny homes on wheels are exploding in popularity all around the world. Television shows and YouTube channels dedicated to tiny homes have garnered cult followings. Many people view purchasing or constructing a tiny home as a viable option to gain freedom and escape the perceived trap of renting or home ownership. There seems to be a market for these homes, however, after research I found purchasing one can be extremely expensive. Therefore, I decided I would contact manufacturers in China and enter a partnership where I would attempt to sell their tiny homes for a profit. I created a website …

Implementing An “Intro To Sst” Topics Course, Connor M. Cody

Construction Management

This study is designed to gauge Cal Poly Construction Management students interest level in a potential new topics course, “Intro to SST”, that will feature small building projects and emphasize construction safety. With this course, students will be more experienced and safe with building in the SST prior to the Residential and Commercial building labs, as well as receiving a brief knowledge of what goes into the trade jobs on a day to day basis. Students were asked to answer ten questions – nine survey and one free response. These questions were designed to provide quantitative and qualitative data that …

Documentation Of Concrete Slabs Prior To Pours, Peter D. Riley

Construction Management

Concrete slabs in multi-level commercial building projects contain many components that become no longer visible once concrete has been poured. As building designs advance and continue to locate components in concrete, it is important to document what these slabs contain in order to verify accurate craftsmanship and allow for improved future construction workflows and building modernizations. This paper explores current industry needs for proficient documentation as well as practices to achieve this. A case study was conducted, testing four devices that analyzed feasibility factors for realistic implementation by a contractor such as cost, interoperability, and level of skill required for …

A Case Study On The Use Of Drones On Heavy Civil Construction Projects, William Devers

Construction Management

Even though the construction industry is known for being behind the curve in adopting new technologies for change, construction professionals are constantly striving for ways to save money and improve efficiency. The emergence of drone technology in recent years has sparked new interest among these professionals for those exact reasons. These flying machines offer numerous benefits to construction companies such as bypassing traditional surveying methods, using photogrammetry to create 3D models used for estimating quantities, improving team communication, ensuring worker safety, increasing owner satisfaction, among other benefits. In this case study, personal interviews will be conducted on a single construction …

Site Safety In San Luis Obispo County, Crystal Becerra

Construction Management

Site safety is a key determinant in a project’s success. In order for a site safety plan to be effective it needs to be implemented and enforced from management all the way down to the laborers on site and it must be site specific. The goal of every safety plan is to identify potential hazards and to have zero accidents throughout the project’s construction. An accident on the jobsite can cause a project to be delayed, increase overall cost, and can even cause a fatal accident (Randle, 2018). This paper will investigate the factors affecting the lack of safety compliance …

A Case Study On The Feasibility Of Shipping Container Homes As Housing For Disaster Victims, Devin C. Cameron

Construction Management

This case study is designed to examine the feasibility and possible implementation of the use of modified steel shipping container units, as temporary relief housing for victims of natural disasters. In this study we will analyze an on-going shipping container project being constructed in Santa Rosa, CA as well as use previously constructed research on this type of construction. The point of this research is to develop and analyze areas in which shipping container projects like this one could be more expeditious and more cost efficient in the future. In short, my findings proved modular shipping container home construction, as …

Poly Canyon Observation Deck, Harrison James Woods, Anthony Joseph Pellegrini

Construction Management

This senior project paper will delve into the background, setbacks and triumphs that where undergone during the course of this project based senior project- The first permanent structure in Poly Canyon in 15 years. Built in true “Learn By Doing Fashion” in the experimental, hands-on lab that some may better know as “Architecture Graveyard.” The project was one of extreme adversity, from fundraising difficulties and a condensed schedule, to unique site conditions and lack of manpower. The students involved in this project showed a strong sense of purpose and determination to see this structure through to completion.

Process Of Adopting And Implementing Bim Technology: A Case Study, Andy J. Stone

Construction Management

On any relatively large construction project, coordination between stakeholders, project managers, superintendents, subcontractors or any other entity becomes vitally important to the project’s success. Building Information Modeling (BIM) creates a virtual design model of a building, which helps construction managers increase efficiency in terms of cost, schedule and overall quality. By connecting 3-D models to coordination and clash detection software’s, construction managers can solve issues quicker or prevent them from happening in the first place. This case study aims to analyze the implementation and use of BIM technology by Shawmut Design and Construction. This study will also focus on the …

Employing Biomimicry In Urban Metamorphosis Seeking For Sustainability: Case Studies, M. Salim Ferwati, Maryam Alsuwaidi, Arezou Shafaghat, Ali Keyvanfar

Faculty Articles

Objective: The current study has aimed to develop the framework of biomimicry involvement in urban metamorphosis for sustainability. This research has engaged four objectives to achieve the aim. Objective one is to explore the rudiment interaction between human and nature through interrogating history, nature’s design. Objective two is to excavate the biomimicry in emulating nature’s genius. Objective three is to investigate the association between biomimicry and sustainable development, focusing on architectural features. Objective four is to develop the framework based on the biomimicry rules for human evolution and survival in the natural environment. Methodology: To achieve objective one, the grounded …

A Framework For Bim Model-Based Construction Cost Estimation, Michael Clark

Master's Theses

This thesis presents a framework to conduct a quantity take-off (QTO) and cost estimate within the Building Information Modeling (BIM) Environment. The product of this framework is a model-based cost estimating tool. The framework addresses the cost uncertainty associated with the detailed information defining BIM model element properties. This cost uncertainty is due to the lack of available tools that address detailed QTO and cost estimation using solely a BIM platform. In addition, cost estimators have little experience in leveraging and managing information within semantic-rich BIM models. Unmanaged BIM element parameters are considered a source of uncertainty in a model-based …

Field Emissions Of Methane And Nitrous Oxide From California Landfills, Alexandra D. Limpert

Master's Theses

Comprehensive and systematic aerial and field investigations were conducted at representative California landfills to quantify emissions of methane and nitrous oxide. Landfills are highly engineered; however, they are one of the largest anthropogenic sources of greenhouse gases, causing human health and safety concerns. Methane (CH₄) and nitrous oxide (N₂O) are significant greenhouse gases with high global warming potentials that are generated in a landfill environment.

For site selection, sites were evaluated based on waste in place, climate zone, faults and oil and gas operations, population density, cover conditions and percentage of cover types, age of waste, …

Analysis Of The Effects Of Adaptive Ramp Metering On Measures Of Efficiency With A Proposed Framework For Safety Evaluation, Jacky Loh

Master's Theses

Adaptive ramp metering (ARM) is a widely popular intelligent transportation system (ITS) tool that boasts the ability to reduce congestion and streamline traffic flow during peak hour periods while maintaining a lower implementation cost than traditional methods such as freeway widening. This thesis explores the effectiveness of ARM implementation on an 18 mile segment of the Interstate 80 (I-80) corridor in the Bay Area residing in northern California. Smaller segments of this particular segment were analyzed to determine the effective length of ARM on efficiency at various lengths originating from a known bottleneck location. Efficiency values were also compared against …

Carbonate Chemistry Characterization In A Low-Inflow Estuary With Recent Seagrass Loss, Jolie Higgins

Master's Theses

Estuaries are dynamic environments that are strongly affected by natural variability, as well as direct and indirect anthropogenic impacts. A better understanding of the drivers of carbon fluxes and biogeochemical variability in estuarine systems is needed, particularly with the increasing threat of ocean acidification. Morro Bay in Central California is a small nationally protected estuary, with seasonally low freshwater inputs. Since 2007, the bay has experienced a significant loss of native seagrass, Zostera marina, which is an important component of the marine ecosystem. Because seagrass photosynthesis decreases carbon dioxide and increases oxygen in the water column, the loss of seagrass …

A Predictive Modeling Approach For Assessing Seismic Soil Liquefaction Potential Using Cpt Data, Jonathan Paul Schmidt

Master's Theses

Soil liquefaction, or loss of strength due to excess pore water pressures generated during dynamic loading, is a main cause of damage during earthquakes. When a soil liquefies (referred to as triggering), it may lose its ability to support overlying structures, deform vertically or laterally, or cause buoyant uplift of buried utilities. Empirical liquefaction models, used to predict liquefaction potential based upon in-situ soil index property measurements and anticipated level of seismic loading, are the standard of practice for assessing liquefaction triggering. However, many current models do not incorporate predictor variable uncertainty or do so in a limited fashion. Additionally, …

Sidewalks To Nowhere: A Tool To Prioritize Pedestrian Improvements, Ho Yan Lai

Master's Theses

Walkability as a concept that captures the ability to walk from one place to another has multiple dimensions. Between traversability to being a proxy for better urban places, there are also numerous measurements of walkability that attempts to quantify certain or all aspects of walkability. It is, however, unclear, through a review of available literature, how these measurements of walkability relate to each other statistically. This methodology focuses on generating a framework for analysts to evaluate and prioritize pedestrian infrastructure. WalkScore™ (WS), HCM Pedestrian Level of Service (PLOS), Average Nodal Degree (AND), and Intersection Density are the four metrics selected …

In-Plane Cyclic Behavior Of A Steel Mesh Reinforced Cob Wall, Julia Fremuth Sargent

Master's Theses

This thesis presents the results from in-plane cyclic testing of a reinforced cob wall. Cob is an earthen building material composed of sand, clay, straw and water. Cob is typically constructed with no steel reinforcement; however, the California Building Code requires reinforcement in all buildings for resisting seismic forces. The purpose of this thesis is to provide additional technical data to integrate cob into the building code.

Test results are reported for a 7’ x 8’ x 14” wall with two layers of welded wire steel reinforcement constructed on a reinforced concrete foundation. In-plane cyclic loading was performed on the …

Liquidated Damages: An Analysis Of Their Use And Effectiveness, Alfredo N. Aragon

Construction Management

A construction company’s success and/or failure is dependent upon project completion with respect to time and budget. Failure to meet the contract completion date results in a loss of profit for owners and contractors alike. In order to help mitigate project delays, liquidated damage clauses have been included into construction contracts. Incorporating provisions within the construction contracts in the form of liquidated damages aims to help shift the financial burden when there is a failure to meet contractual obligations, hopefully offering quick compensation for delays. Unlike general or actual damages, liquidated damages are pre-defined and agreed upon prior to entering …

Next-Generation Rainfall Idf Curves For The Virginian Drainage Area Of Chesapeake Bay, Xixi Wang, Xiaomin Yang, Zhaoyi Cai

Civil & Environmental Engineering Faculty Publications

Probability-based intensity-duration-frequency IDF curves are needed but currently lacking for Department of Defense DoD to construct and manage its infrastructure in changing climate. The objectives of this project were to 1 develop an innovative approach for considering rainfall non-stationarity in developing such IDF curves and 2 apply this approach to the state of Virginia. In this regard, the observed data on 15-min rainfall at 57 gauges and the precipitations projected by twelve pairs of Regional Climate Model RCM and Global Circulation Model GCM were used. For a given gauge or watershed, in terms of fitting the empirical exceedance probabilities, a …

Advanced Concrete Course For Cal Poly Construction Management Department, Dante N. Feliciano

Construction Management

This senior project provides a solution to the Construction Management Department at Cal Poly, San Luis Obispo whose curriculum lacks an individual Concrete course. With Concrete being one of the most used building material worldwide, this course will help immensely. The goal of this project is to fill the gap with an Advanced Concrete Course that is prepared and ready to be introduced to future students. The course has an emphasis on outside research learning – where the student gets to become the instructor. Carefully thought out and executed lecture materials are included in the course. Lecture slides give background …

Development Of A Topics Course For Construction Management, William Harrison Wygal

Construction Management

The Cal Poly Construction Management program has been proven to produce some of the most prepared graduates heading into new careers in every facet of the construction industry. Speaking with faculty member Tom Kommer, we have concluded that there is a need for an increased focus on construction risk management within the curriculum. In order to develop a course which would suitably educate Cal Poly Construction Management students in the topic of risk management, I performed a literary review during which I determined which risks are most prevalent within the construction industry and how firms in the construction industry manage …

Fatigue Performance Of Rc Beams Strengthened With Near Surface Mounted Cfrp Composites, Tamer Ghaith Mousa Eljufout

Dissertations

Bridges have a fundamental role in improving the effectiveness of highways and providing an expedient and express traffic system. Over time, Reinforced Concrete (RC) bridges degrade due to gradually increased traffic loads and environmental deteriorations. Subsequently, service loads might cause higher stresses in concrete and steel reinforcement than stresses considered in the design stage. This affects the structural performance of RC beams and leads to sudden fatigue failure. As such, there is an essential need for rehabilitation to avoid hazards and tragedies.

Carbon Fiber Reinforced Polymer (CFRP) composites are becoming widely used to strengthen RC bridges. Near Surface Mounted (NSM) …

Assessing Infrastructure Elements Using Automated Object Detection Technique In Smart City Applications, Majid Mastali

Dissertations

Nowadays, road features are becoming more complex leading to more complicated complaints regarding urban environments. Point Cloud Data (PCD) processing is an essential element for detecting objects and analysing human driving behavior to identify the variables defining challenging objects and maneuvers in smart cities. PCDs include a range of processing, including indirect processing (e.g., data converting, cleaning process) and direct process (e.g., pass through elevation filter, statistical outlier removal, normal estimation as well as classification). Static and dynamic object detection and analysis are typically considered the most sophisticated options subsumed under PCDs. They involve direct evaluation of both static and …

Analysis Of Disengagements In Semi-Autonomous Vehicles: Drivers’ Takeover Performance And Operational Implications, Francesca M. Favaro, Sky Eurich, Syeda Rizvi, Shivangi Agarwal, Sumaid Mahmood, Nazanin Nader

Mineta Transportation Institute

This report analyzes the reactions of human drivers placed in simulated Autonomous Technology disengagement scenarios. The study was executed in a human-in-the-loop setting, within a high-fidelity integrated car simulator capable of handling both manual and autonomous driving. A population of 40 individuals was tested, with metrics for control takeover quantification given by: i) response times (considering inputs of steering, throttle, and braking); ii) vehicle drift from the lane centerline after takeover as well as overall (integral) drift over an S-turn curve compared to a baseline obtained in manual driving; and iii) accuracy metrics to quantify human factors associated with the …

Electrochemically Reactive Membranes For Efficient Biomass Recovery, Pollutant Degradation And Commercialization, Likun Hua

Dissertations

Micropollution in natural waters such as rivers and groundwater aquifers is a widespread problem that prevents these potentially potable sources from being used as drinking water. In the United States, approximately two-thirds of the over 1,200 most serious hazardous waste sites in the nation are contaminated with trichloroethylene (TCE), a potentially carcinogenic compound. Other emerging and environmentally persistent organic micropollutants include polyromantic hydrocarbons (PAHs), organophosphate flame retardants, endocrine disrupting compounds (EDCs), pesticides, herbicides, pharmaceuticals and personal care products (PPCPs). Membrane filtration is one of the most efficient separation processes widely used for water treatment and pollutant removal. However, traditional membrane …

Minimizing Vehicular Traffic Via Optimized Land Use Development For A Sustainable And Equitable Future, Babu Veeregowda

Dissertations

Mixed-use developments and transit-oriented developments are becoming very common in urban areas in an effort to reduce sprawl. Numerous studies have shown that such programs would not be successful unless the mix of land uses and sizes is well-balanced and integrated with the surrounding neighborhood. Developers often ignore this aspect in favor of immediate financial gain and do not realize that there are sustainable financial benefits in land use optimization. In addition, professionals often work with limited logistics, resources, and technical knowledge and therefore struggle in setting goals and suggesting land uses that have less auto dependency based on travel …

Fouling And Aging In Membrane Filtration : Hybrid Afm-Based Characterization, Modelling And Reactive Membrane Design, Wanyi Fu

Dissertations

Membrane filtration has been extensively used in water and wastewater treatment, desalination, dairy making, and biomass/water separation. However, membrane fouling, aging and insufficient removal efficiency for dissolved organic matters remain major challenges for wider industrial applications. In order to tackle these challenges, this doctoral dissertation investigates mechanisms of membrane fouling and development of antifouling membrane filtration technologies. Specifically, four major research areas are explored: (i) nanoscale physicochemical characterization of the chemically modified polymeric membranes; (ii) quantitative modelling between membrane properties and membrane fouling and defouling kinetics; (iii) development of quantitative structure-activity relationships for membranes that undergo thermal and chemical aging …

Effect Of Specimen Thicknesses On Water Absorption And Flexural Strength Of Cfrp Laminates Subjected To Water Or Alkaline Solution Immersion, Xue Zhang, Yanlei Wang, Baolin Wan, Gaochuang Cai, Yuan Qu

Civil and Environmental Engineering Faculty Research and Publications

In this paper, an experimental research was undertaken to investigate the effect of specimen thicknesses on water absorptions and flexural strengths of wet lay-up CFRP laminates subjected to distilled water or alkaline solution immersion up to 180 days. Test results showed that the water uptake and flexural strength retention of CFRP laminates were significantly affected by the adopted specimen thickness. For the same aging time, the water uptake of CFRP laminates decreased in the early stage of immersion and increased in the later stage of immersion with the increase of specimen thickness. Meanwhile, the flexural strength retention generally increased as …

Mascoma River Greenway Extension, Isalys Quiñones

ENGS 86 Independent Projects (AB Students)

In July of 2018, the Mascoma River Greenway (MRG), a 2.2-mile rail trail extending from Downtown Lebanon, NH to Glen Road in West Lebanon, NH, was completed with the help of the MRG Coalition, the Friends of the Northern Rail Trail, Lebanon Recreation and Parks, and members of the City of Lebanon. Initially, this trail was proposed to extend from Downtown Lebanon to Downtown West Lebanon and White River Junction (WRJ). With pushback from the State of New Hampshire to lease the City of Lebanon recreational usage to the New Hampshire State Department of Transportation (NHDOT) owned rail corridor, the …

Investigating The Rapid Curing Possibility Of Geopolymer Concrete, Ashlesh Banjara

Master's Theses

Recent studies of heat-cured fly ash based green geopolymer concrete have shown its suitability for fabrication of structural members. Fabrication of these structural members requires continuous moderate heating (145°F) for 24 hrs, and an oven essential, for a large member can quickly turn into an energy guzzler, potentially eliminating the green credentials of the product. The proposed research involves the development of a frontal polymerization (FP) method that achieves rapid curing of geopolymer at ambient condition after short-term heat application. Initial work shows thermal FP in geopolymer is a possibility and might be a solution to the problem. The process …

On The Inference Of The State Of Turbulence And Mixing Efficiency In Stably Stratified Flows, Amrapalli Garanaik, Subhas K. Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Scaling arguments are presented to quantify the widely used diapycnal (irreversible) mixing coefficient Γ = ∈PE/∈ in stratified flows as a function of the turbulent Froude number Fr = ∈/Nk. Here, N is the buoyancy frequency, k is the turbulent kinetic energy, ∈ is the rate of dissipation of turbulent kinetic energy and ∈PE is the rate of dissipation of turbulent potential energy. We show that for Fr≫1, Γ ∝ Fr^-2, for Fr∼ O (1), Γ ∝ Fr^-1 and for Fr ≪ 1, Γ ∝ Fr⁰. These scaling results are tested using high-resolution direct numerical …