Civil and Environmental Engineering Commons^™

Analyzing Impacts Of Transportation And Non-Transportation Activities On Human Health With An Advanced Platform For Collecting Travel And Physical Activity Data, Raed Abdullah Hasan

Dissertations

Recently much attention is paid to the lack of physical activities that may cause the health problems in many counties. Travel activities provide a certain amount of physical activities, and the active transportation, such as walking and cycling, becomes more important as an essential element of transportation. The active transportation is expected to contribute to improving human health by reducing cardiovascular disease, obesity, and premature death. However, detailed relationship between the transportation choices and human health has not been well understood. Therefore, there is a need for investigating traveler behaviors and how their choices affect physical activities and public health. …

Green Up Pavement Rehabilitation Design Tool, Dragos Andrei, Robert E. Kochan, Jose H. Perez

Mineta Transportation Institute

While designers produce pavement rehabilitation recommendations every day, for projects of all sizes, most designers have little information on the environmental impact of their recommendations. This research developed a new decision tool, called the “Green Up Pavement Rehabilitation Design Tool,” to allow the comparison of different rehabilitation solutions in terms of greenhouse gas emissions and to encourage sustainable practices such as materials recycling and the use of permeable, cool, and quiet pavement surfaces. The project aligns with the major goal of California Senate Bill 1, which is “to address deferred maintenance on the state highway system and the local street …

Defining Boat Wake Impacts On Shoreline Stability Toward Management And Policy Solutions, Donna Marie Bilkovic, Molly M. Mitchell, Jennifer Davis, Julie Herman, Elizabeth Andrews, Angela King, Pamela Mason, Navid Tahvildari, Jana Davis, Rachel L. Dixon

Civil & Environmental Engineering Faculty Publications

Coastal economies are often supported by activities that rely on commercial or recreational vessels to move people or goods, such as shipping, transportation, cruising, and fishing. Unintentionally, frequent or intense vessel traffic can contribute to erosion of coastlines; this can be particularly evident in sheltered systems where shoreline erosion should be minimal in the absence of boat waves. We reviewed the state of the science of known effects of boat waves on shoreline stability, examined data on erosion, turbidity, and shoreline armoring patterns for evidence of a response to boat waves in Chesapeake Bay, and reviewed existing management and policy …

Viral Surrogates In Potable Reuse Applications: Evaluation Of A Membrane Bioreactor And Full Advanced Treatment, Katerina Papp, Duane Moser, Daniel Gerrity

Civil and Environmental Engineering and Construction Faculty Research

This study employed quantitative polymerase chain reaction (qPCR) to evaluate the occurrence and removal of five microbial surrogates at two water reuse facilities. The surrogates were (1) the 16S rRNA gene; (2) the AllBac assay for Bacteroides; (3) the Bacteroides bacteriophage ϕB124-14ϕB124-14; (4) the Bacteroides bacteriophage ϕcrAssphage; and (5) the pepper mild mottle virus (PMMoV). Log removal values (LRVs) were quantified for a membrane bioreactor (MBR) and across a full advanced treatment (FAT) train. PMMoV, ϕB124-14ϕB124-14, and ϕcrAssphageϕcrAssphage were detected in the MBR feed at concentrations of approximately 103 gene copies(gc)/mL103 gene⁢ copies(gc)/mL, 105 gc/mL105 gc/mL, and 106 gc/mL106 gc/mL, …

Safety Assessment Of Road Vehicle In Crosswind Considering Driver Behavior, Jiexuan Hu

LSU Doctoral Dissertations

With expansion of the economy, more and more highway networks extend to coastal areas and mountain valley areas. Vehicles will be exposed to strong crosswinds when driven on these highway roads, especially in hurricane season and in winter in these two different topographic areas. Strong crosswinds threaten the safety of transportation infrastructure and passing vehicles in forms of vehicle accidents that usually result in traffic blockage and driver injury, posing negative effects on economic growth. This dissertation aimed to evaluate the vehicle safety when running through crosswinds in consideration of driver behaviors.

Firstly, the aerodynamic characteristics of road vehicles were …

A Practitioner’S Guide To Small Unmanned Aerial Systems For Bridge Inspection, Sattar Dorafshan, Robert J. Thomas, Calvin Coopmans, Marc Maguire

Electrical and Computer Engineering Faculty Publications

Small unmanned aerial system(s) (sUAS) are rapidly emerging as a practical means of performing bridge inspections. Under the right condition, sUAS assisted inspections can be safer, faster, and less costly than manned inspections. Many Departments of Transportation in the United States are in the early stages of adopting this emerging technology. However, definitive guidelines for the selection of equipment for various types of bridge inspections or for the possible challenges during sUAS assisted inspections are absent. Given the large investments of time and capital associated with deploying a sUAS assisted bridge inspection program, a synthesis of authors experiences will be …

Practitioner's Guide To Small Unmanned Aerial Systems For Bridge Inspection, Sattar Dorafshan, Robert J. Thomas, Calvin Coopmans, Marc Maguire

Civil Engineering Faculty Publications

Small unmanned aerial system(s) (sUAS) are rapidly emerging as a practical means of performing bridge inspections. Under the right condition, sUAS assisted inspections can be safer, faster, and less costly than manned inspections. Many Departments of Transportation in the United States are in the early stages of adopting this emerging technology. However, definitive guidelines for the selection of equipment for various types of bridge inspections or for the possible challenges during sUAS assisted inspections are absent. Given the large investments of time and capital associated with deploying a sUAS assisted bridge inspection program, a synthesis of authors experiences will be …

Source-Separated Urine Nitrification And Ion Accumulation In Sub-Irrigated Planters Using Domestic Wastewater, David A. Forrest

Civil Engineering ETDs

Wastewater reuse is a field at the crux of the food-energy-water nexus. This nexus is a modern attempt at qualifying relationships between resource availability and stewardship, and the choices and needs of market-driven culture. This study aims to develop simple low-tech systems to use domestic wastewater or source-separated urine, treated onsite, for domestic container garden water and nutrient supply. Four experiments were conducted to assess specific aspects of this technology to help develop relevant stages in this reuse chain.

The objective of the first experiment was a proof of concept to assess compatibility of sub-irrigated planters (SIP) with treated domestic …

The Application Of Gray-Scale Level-Set Method In Segmentation Of Concrete Deck Delamination Using Infrared Images, Chongsheng Cheng, Zhigang Shen

Department of Construction Engineering and Management: Faculty Publications

Conventional nondestructive delamination detection of concrete pavements through thermography is often based on temperature contrasts between delaminated and sound areas. Non-uniform backgrounds caused by the environmental conditions are often challenging for contrast-based methods to robustly differentiate the delaminated areas from the sound areas. Instead of focusing on the temperature contrast, this study proposes a temperature gradient-based level set method (LSM) to detect boundaries for delamination segmentations. A modified edge indicator function is developed to represent the normalized temperature gradient of a thermal image. The experimental study was conducted to evaluate its applicability and stability for boundary detection in terms of …

Using Phenomenography In Engineering Education, Una Beagon

Other resources

A phenomenographic study of academic conceptions of professional skills in engineering programmes in Ireland

Restoration Of Defaced Serial Numbers Using Lock-In Infrared Thermography (Part I), Ikwulono Unobe, Lisa Lau, John Kalivas, Rene Rodriguez, Andrew D. Sorensen

Civil and Environmental Engineering Faculty Publications

Infrared thermal imaging is an evolving approach useful in non-destructive evaluation of materials for industrial and research purposes. This study investigates the use of this method in combination with multivariate data analysis as an alternative to chemical etching; a destructive method currently used to recover defaced serial numbers stamped in metal. This process involves several unique aspects, each of which works to overcome some pertinent challenges associated with the recovery of defaced serial numbers. Infrared thermal imaging of metal surfaces provides thermal images sensitive to local differences in thermal conductivity of regions of plastic strain existing below a stamped number. …

Restoration Of Defaced Serial Numbers Using Lock-In Infrared Thermography (Part Ii), Ikwulono Unobe, Lisa Lau, John Kalivas, Rene Rodriguez, Andrew D. Sorensen

Civil and Environmental Engineering Faculty Publications

This paper details continuing work on the development of a substantive non-destructive method to recover defaced serial numbers stamped or laser engraved into metallic objects based on lock-in infrared thermography. This method relies on the existence of a local zone of plastic strain created from stamping pressures in mechanically stamped pieces and a heat-affected zone in laser engraved samples, both extending to depths below the visible characters. The grain structure within these zones is dislocated due to the external forces applied. These deformed areas are exposed to the surface when the serial numbers are defaced. Infrared thermography utilises the change …

Synthesis & Characterization Of Polymer-Modified Calcium Silicate Hydrate For Wellbore Applications, Jeremy J. Starr

Civil Engineering ETDs

Calcium Silicate Hydrate (C-S-H) acts as the primary binding material that is mainly responsible for the strength and durability of concrete. C-S-H constitutes approximately 67% of hydrated ordinary Portland cement by volume. C-S-H forms with a range of stoichiometric formula dependent on many factors such as CaO/SiO₂ ratio. The continued rise of hydrocarbon exploration in the United States has developed the need for improved wellbore cementing materials. Binders with good bond strength to steel and rock interfaces, low shrinkage, and high cracking strength are sought by the oil and gas industry. The incorporation polymers and nano materials has evolved …

High Ammonia Strength Wastewater Treatment Using Algae, Bacteria And Ion Exchange, Nadezhda Zalivina

USF Tampa Graduate Theses and Dissertations

Nitrogen pollution has been considered one of the major problems of the 21st century. Discharge of nitrogen from improperly treated wastewaters into surface water bodies causes eutrophication and hypoxia, which results in significant environmental, public health and economic damages. In addition to the incoming flow, wastewater treatment plants generate internal highly concentrated ammonium streams, such as anaerobic digestion sidestream. As a current practice, sidestream without prior treatment is returned to the head of the plant, which increases the total incoming nitrogen load by 20-30% and often exceeds the treatment capacity. The most commonly used conventional biological nitrogen removal processes are …

Innovating Green Stormwater Infrastructure For Nutrient Management: Long-Term Field And Modeling Studies Of Conventional And Modified Denitrifying Bioretention Systems, Emma V. Lopez-Ponnada

USF Tampa Graduate Theses and Dissertations

Urban stormwater and nutrient management are increasingly important topics to address globally, as coastal urbanization increases, disturbing the natural landscape, hydrology, and water quality. Untreated urban stormwater runoff carries pollutants that enter our waterways, such as rivers and marine environments, which serve as drinking water sources, recreational sites, and locations for economic livelihood. One pollutant and nutrient of concern for water quality is reactive nitrogen (N). Since pre-industrial time, reactive nitrogen has doubled from human activity. When found in excess in waterways, nitrogen causes an overabundant growth of algae, which can result in eutrophic and hypoxic conditions, impacting ecosystems, human …

Implementations Of Resilience Engineering For Natural System Disturbances: A Panarchical Perspective, Mark Charles Stone Victoria Jaramillo

Civil Engineering ETDs

This body of work seeks to advance knowledge of resilience and resilience engineering (RE) from a practical and theoretical perspective. Three distinct applications of resilience and RE that align two fundamental frameworks are presented. The first application, a vulnerability assessment, exemplifies the largest scale of panarchy and the measuring aspect of RE. The second application, a Bayesian network approach, exemplifies the intermediate scale of panarchy and the modeling aspect of RE. The third application, an engineering design project using analytical hierarchy process (AHP), exemplifies the smallest scale of panarchy and the building aspect of RE. Studying these applications enriches understanding …

The Development Of A Novel Experiment On Confined, Flattened Brazilian Disks To Correlate Damage And Permeability In Brittle Geo-Materials, Samuel H. Boyce

Civil Engineering ETDs

This research develops a novel experiment using flattened Brazilian disks under confining pressure with concurrent permeability measurements and acoustic emission monitoring. The purpose of this work is to correlate damage and permeability in brittle geo-materials. Two series of tests are performed on concrete and one series on tuff, under a range of confining stresses between 2.76 and 13.79 MPa. Tests were continued beyond peak stress conditions, capturing data in the post-peak region. The acoustic emission data (cumulative energy and counts) are used to identify damage thresholds and track the progression of microscopic damage. This quantified damage is then correlated to …

Dynamic Prediction Of Runway Configuration And Airport Acceptance Rate, Yuan Wang

USF Tampa Graduate Theses and Dissertations

Automated prediction of runway configuration and airport capacity is critical for the future generation of air traffic management. In the future aviation industry, multi-sources weather forecast information will be available for air traffic decision-making units; how to use these data efficiently is key for overall efficiency of air traffic management. Currently, air traffic management personnel lack tools to assist them to translate weather forecast data into real-time airport capacity. Runway configurations and AARs of airports in a multi-airport system are determined by different air traffic controller personnel. The lack of synchronization may lead to the loss of efficiency of the …

Biointerfacial Studies Of Nitrifying Biofilms On Physically And Chemically Modified Surfaces, Philip Marley Roveto

Civil Engineering ETDs

Interactions between bacteria and surfaces during the initiation of biofilm formation are complex phenomena with significant and wide-ranging implications for nutrient cycling, ecosystem and human health, and the remediation of anthropogenic pollutants. Nitrifying biofilms are currently used for ammonia removal in wastewater treatment plant (WWTP) systems. As well-studied biofilms, they can serve as models towards understanding crucial aspects of biofilm engineering. The overall objective of this research was to better understand how variations in specific surface chemistries and topographical features affect nitrification rates and microbial populations in an effort to develop technologies for improved productivity. The experimental approach was to …

Imix Exz Wall Wp Residential Basement Waterproofing, Chad Clark

Building Academy Conference

No abstract provided.

Understanding And Utilizing Basic Codes, Rodney Johnson

Building Academy Conference

This presentation is designed for inspectors and design professionals, to have a basic understanding of how the various codes work together to accomplish a well designed and a safe building for the end user when completed and ready for occupancy. One code doesn’t fit all parts of the big picture of the design and inspection of the building during construction and at the final completion of the building prior to occupancy and one code does not address the future uses and maintenance of the structure without the assistance of the entire family of codes to support and complement one another.

Agricultural Rental Hall Wedding And Event Venues Party Barns, Sallie D. Fahey, Mike Wolf, Pat Grimes

Building Academy Conference

Rural event and wedding venues are all the rage, but many simply begin operation without proper code and zoning compliance. Rural property owners seldom understand that their old barn or new pole building was not built to Class 1 structure standards to allow public access, but when enforcement is initiated tearful brides and angry event planners blame local government. Other non-approved event venue owners are knowingly exceeding the limits and pushing enforcement of codes and public nuisance laws.

Advances In Remote Sensing To Understand Extreme Hydrological Events, Dongkyun Kim, Minha Choi, Jongho Kim, Ungtae Kim

Civil and Environmental Engineering Faculty Publications

No abstract provided.

Recovery Of Gypsum & Magnesium Hydroxide From Brackish Water By Chemical Precipitation, Sugam Tandukar

Civil Engineering ETDs

Exhaust gases from coal combustion contain contaminants such as sulfur dioxide (SO₂) and nitrous oxide (NO_x), and traces of other pollutants such as arsenic (As), mercury (Hg), nitrate (NO₃), and selenium (Se). Exhaust gas scrubbers are used to limit the emissions of these constituents to air. Treating exhaust gases to remove SO₂ is referred to as flue gas desulfurization (FGD), and the most common method is the use of wet scrubbers using limestone slurries. The limestone slurry is recycled multiple times in the scrubber, and to limit the concentration of dissolved constituents, a …

Enhancing Concrete Pavement Service Life Using Multiple Strategies To Reduce Cracking Potential, Dhanushika Mapa Mudiyanselage

USF Tampa Graduate Theses and Dissertations

Over the past years, prevention of cracking in concrete structures, especially at early age, has been a challenge facing transportation agencies. During early age, restraint of thermal and moisture related volume changes causes cracking in concrete. This research focuses on evaluating the effectiveness of different cracking mitigation strategies that can be implemented, in different concrete elements, to reduce early-age cracking incidents and therefore enhance concrete service life. To this end, a battery of field and laboratory testing were conducted, and finite element analysis was performed to better understand the mechanisms of primary significance on minimizing cracking risks commonly associated with …

Land Surface Temperature Variability Across India: A Remote Sensing Satellite Perspective, Satya Prakash, Hamidreza Norouzi

Publications and Research

Land surface temperature (LST) plays a key role in the surface energy budget computation and land surface process studies. The Moderate Resolution Imaging Spectroradiometer (MODIS) sensors onboard the Aqua and Terra satellites provide comprehensive global LST estimates at a fine spatial resolution. The MODIS products were recently upgraded to Collection 6, and shown to be more accurate than its predecessor Collection 5 products. In this study, LST and its variability have been examined across India from Collection 6 of the Aqua MODIS data at 0.05° spatial resolution for the period of 2003 to 2017. All-India mean LST characteristics show distinctive …

Damage Evaluation Of Full-Scale Rc Slab By Ultrasonic Tomography, Hiroshi Hayashida, Tamon Ueda

International Conference on Durability of Concrete Structures

There have been reports of road bridges that deteriorated after their RC slabs had been repaired. The insufficient removal of damaged materials is said to be the cause of such post-repair deterioration. Consequently, there is a call for a survey method that can detect deteriorated materials of bridges with high accuracy. Towards the development of such a method, this report focuses on ultrasonic tomography, because it can detect damage to the RC slabs of road bridges over relatively large areas. We examined the applicability of ultrasonic tomography to a method of assessing the RC slab damage by a test that …

Integrated Sensor Network For Monitoring Steel Corrosion In Concrete Structures, José Enrique Ramón-Zamora, José Manuel Gandia-Romero, Román Bataller, Ana Martínez-Ibernón, Isabel Gasch, Juan Soto

International Conference on Durability of Concrete Structures

The developed Integrated Sensor Network (ISN) allows a non-destructive monitoring of the rebar condition at different parts of the structure. The corrosion sensor allows the accurate determination of the corrosion rate (µm/year). Moreover, additional sensors are integrated in order to detect relevant changes in the concrete electrochemical condition.

The ISN has been published as an international invention patent (reference number WO 2016/177929 A1). The system is based on an economic, simple, reliable and durable technology, which makes its implementation viable on new and repaired reinforced concrete structures (RCS). Therefore, it is also possible monitoring non-accessible parts such as deep foundations …

Similarity Analysis Of Rebar Corrosion Under Different Electrochemical Accelerated Method, Chuanqing Fu, J Chen, X Jin, H Ye, Jun Zhu

International Conference on Durability of Concrete Structures

The concrete cover cracking caused by non-uniform corrosion of reinforcing bar is one of the most important reason for structure service performance degradation. The most widely used electrochemical accelerated corrosion methods include external and internal electrode methods. The reinforcement are used as anode in both methods. The different between two methods is the position of auxiliary. In external electrode method, the auxiliary is set outside the specimen, including three methods, i.e. samples whole/part submerged in saline, samples wrapped by sponge and steel mesh. The electrochemical mechanism of these four accelerated method were analyzed by using the FE software COMSOL. According …

Micro-Mechanical Analysis Of Corrosion Products Formed During Long-Term Carbonation Induced Corrosion Of Steel, Marijana Serdar, Dubravka Bjegovic, Valérie L’Hostis, Stéphane Poyet, Damien Féron

International Conference on Durability of Concrete Structures

During corrosion distinct types of corrosion products form, composed of different ratios of ferrous ions and oxide, hydroxides. Corrosion products have different physical and mechanical properties, mainly density, resistivity, volume and modulus of elasticity compared to iron. Knowing properties of corrosion products is indispensable for service life modelling of structures and can give valuable insight into the long-term corrosion propagation process. In this study micro-indentation method was used to evaluate mechanical properties of different layers formed during long-term carbonation induced corrosion of steel in concrete. Investigation was performed on three sets of reinforced concrete samples, that underwent corrosion during 50, …