Chemical Engineering Commons^™

An Analytical Investigation Into Solute Transport And Sorption Via Intra-Particle Diffusion In The Dual-Porosity Limit, Lucy C. Auton, Maria Aguareles, Abel Valverde, Timothy G. Myers, Marc Calvo-Schwarzwalder

All Works

We develop a mathematical model for adsorption based on averaging the flow around, and diffusion inside, adsorbent particles in a column. The model involves three coupled partial differential equations for the contaminant concentration both in the carrier fluid and within the particle as well as the adsorption rate. The adsorption rate is modelled using the Sips equation, which is suitable for describing both physical and chemical adsorption mechanisms. Non-dimensionalisation is used to determine the controlling parameter groups as well as to determine negligible terms and so reduce the system complexity. The inclusion of intra-particle diffusion introduces new dimensionless parameters to …

Understanding The Impact Of Microplastic Contamination On Soil Quality And Eco-Toxicological Risks In Horticulture: A Comprehensive Review, N. P. Gayathri, Geena Prasad, Vaishna Prabhakaran, Vishnu Priya

Research outputs 2022 to 2026

The horticulture sector, essential for global food production, confronts significant challenges with prevalent pollutants, mainly microplastics. The presence of microplastics in the food chain has induced physiological stress and a multifactorial food safety concern. The complexity of the problem, arising from intricate interactions among microplastics, organisms, and ecosystems, poses a substantial challenge to food safety, necessitating an immediate strategic perspective due to the associated risks to human health and eco-toxicology. Significant knowledge gaps persist regarding their impact on terrestrial ecosystems, especially in horticulture. This study addresses the urgent need to comprehend the implications of microplastics on soil health, eco-toxicological risks, …

Creation And Fill Of An Eocene Incision On A Leeward Margin Of An Isolated Carbonate Platform, Northeast Sirte Basin, Libya, Muneer Abdalla, Wan Yang, Abdlsaid Ibrahem, Salah Hassan, Alzobeere Bogzil

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The recognition of incised valleys and the reconstruction of their filling history are significant for defining unconformity surfaces and their stratigraphic framework, particularly when detailed petrographic data are missing. However, little of such research is published so far on the characterization and factors influencing the development of incised valleys using three-dimensional seismic and well data. Thus, this work aims to examine and analyze the geometry and factors controlling the formation and sediments filling of an eocene incised valley in a sequence stratigraphic frame using an integration of three-dimensional seismic and well data from ne sirte basin, libya. The eocene incised …

A New Design Strategy For Sizes Of Polymer Gel Treatments Derived From A Comprehensive Assessment Of Their Case Histories, Munqith Aldhaheri, Abdullah Almansour, Na Zhang, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The incentive to revive brownfield oil production extends the interest to apply polymer gel treatments in injection wells. Virtually, volumes of previous remediations implemented in similar reservoir types are used to size new jobs. Such an analogy-based design procedure imposes a need to evaluate the most frequent designs for each reservoir type based on a comprehensive field survey. This survey provides a new treatment sizing strategy for polyacrylamide-polymer bulk gels by reviewing their field applications in 653 injection wells. The new strategy proposes using the average and most frequent gel volumes per reservoir type as an initial estimate of the …

A Comprehensive Review Of Fischer-Tropsch Synthesis Processes To Produce Sustainable Diesel And Aviation Fuel, Joseph C. Steinagel

Honors College Theses

The greatest threat known to humankind today is global warming. It affects every nation on the planet and the natural order of all living things. Consequently, this ongoing crisis necessitates action to scientifically revolutionize important areas of society, including researching modern adaptations of the transportation industry. In that regard, it has been determined that an effective short-term answer to eliminating carbon emissions is to produce sustainable fuels that run cooperatively with the well-established machines of today. Sustainable aviation fuel (SAF) is one such topic of interest, and the Fischer-Tropsch synthesis process is an effective way of producing SAF. To that …

Poster Session: Onu Engineering Freshman And Senior Design Projects, Keith Schimmel

Scholar Week 2016 - present

This poster session is held Friday, April 19, 4:45-6:15pm, with food served, in the Reed Hall of Science Tech Center.

The capstone engineering senior design projects at Olivet Nazarene University involve interdisciplinary engineering teams completing real-life projects sponsored by companies, mission organizations, and professional society competitions. The engineering first-year design projects at Olivet Nazarene University involve interdisciplinary engineering teams proposing product improvement designs, using Computer Aided Design (CAD) software. Posters for both the senior and freshman engineering design projects will be presented during this poster session.

Scaling And Optimizing Agitated Tanks For The Homogenization Of Complex Biological Suspensions, Josh Dittmer, Cara Serpe, Sterling Staranchuk

Scholar Week 2016 - present

This study presents an investigation of the agitated tank mixing dynamics across various scales, including lab, two pilot, and full scales, focusing on human blood plasma Kistler-Nitschmann-Cohn (KNC) I+II+III suspensions. The methods employed are empirical tank mixing correlations within the KaeMix software package and Computational Fluid Dynamics (CFD) modeling using ANSYS Fluent. Tank and agitator geometries were generated in ANSYS Workbench and meshed in ANSYS Fluent with varied cell sizes to capture detailed dynamics near the agitators and in the bulk fluid. Kaemix analysis provided rapid computation of bulk mixing times at different scales. Beyond simulations, the project aims to …

Seeding Effects Of Submicron Caal-No3 Ldh Particles On The Hydration And Properties Of Portland Cement And Sulfoaluminate Cement Pastes, Sukanta K. Mondal, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Layered Double Hydroxide (LDH) Is Reported To Improve The Durability Of Concretes, Primarily Due To Its Ability To Exchange Anionic Species, Including Chloride, Which Is Implicated In Corrosion-Driven Durability Issues. However, There Is No Comprehensive Study Investigating The Effect Of LDH On The Properties Of Different Cement Systems At Both Early And Mature Ages. In This Study, The Early Age And Mature Age Properties Of Portland Cement (OPC) And Calcium Sulfoaluminate (CSA) Cement Pastes Seeded With Submicron-Sized Calcium Aluminum-NO3 LDH (CaAl-NO3 LDH) Were Investigated. The Effects Of The 1–5%mass Dosage Of LDH On The Hydration Of Both Cement Systems Were …

Assessing Hydrolysis Performance Of Ce(Oh)4@Pim-1 Composites Functionalized With Amidoxime, Aldoxime, And Carboxylate Groups Toward Dimethyl 4-Nitrophenylphosphonate, A Nerve Agent Simulant, Peter O. Aina, Sukanta K. Mondal, Ali A. Rownaghi, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

In recent years, significant attention has been directed toward evaluating the reactivity of diverse polymers to gauge their catalytic activity against hazardous chemicals. Among these polymers, pim-1 has emerged as an exceptional candidate due to its noteworthy attributes including high surface area, excellent solubility, and the capability to fine-tune the nitrile functional groups along its polymeric backbone. In this study, we explored the impact of different functional groups, such as amidoxime (ax), aldoxime (ox), and carboxylate (cooh), on the degradation of dimethyl 4-nitrophenylphosphonate (dmnp) in comparison to pure pim-1 and their respective ce(oh)4-loaded polymer composites. Remarkably, the pim-1-ax analog exhibited …

Research On 3d Printing Resin Exposure Properties And Its Application On Centrifugal Microfluidic Platform Based On Fluorescence Detection, Zheng Qiao

LSU Doctoral Dissertations

This dissertation encapsulates significant advancements in the field of SLA 3D printing and centrifugal microfluidics. Central to the research is the development of a novel mathematical model for predicting trapped resin thickness in SLA 3D printing, a groundbreaking contribution that addresses a critical aspect of printing intricate structures. This model, the first to establish a mathematical relationship for resin thickness, is rooted in a comprehensive study of the resin curing process. The research leverages the concept of 'critical dosage' for resin curing, leading to a more refined and theoretically grounded approach for calculating curing thickness. Experimentation further validates the model, …

Dying Of Natural Silk Deglued By Various Methods, Venera Djavdatovna Khamidova

Technical science and innovation

Products made of natural silk are indispensable for their hygienic properties and will always be in great demand. To obtain an even and intense coloration on a textile material, it is necessary to ensure its effective preparation with the most complete removal of hydrophobic contaminants (both natural and silicone oils applied during the weaving process, lubricants, etc.), which hinder the dyeing of the substrate and reduce the color characteristics of the obtained colors. Therefore, the issue of preparing natural silk for dyeing is relevant. In view of the sensitivity of the main fiber-forming component of natural silk - fibroin to …

Globular Protein For Surface Modification Of Cellulosecontaining Materials, Nodira Saydaliyeva

Technical science and innovation

The purpose of this work is the chemical modification of cotton fabrics with natural globular protein. Modification was carried out in the process of finishing cotton fabrics, after decoction and bleaching in a continuous mode. The effect of modification on the strength, protein content and functional groups of cotton fabric has been studied. According to the results obtained using the AUTOGRAPH AGS-N machine, it was found that the modification of cotton fabrics with a solution of globular protein increases the strength of the treated fabrics, depending on the concentration of the modifier and the temperature regime. Treatment with a highly …

Seismicity Characteristics Of The Gulf Of Aqaba Seismogenic Zone And Their Hazard Implications In Northwestern Saudi Arabia, Ali Abdelfattah, Mohamed Ezzelarab, Hazem Badreldin, Hassan Alzahrani, Saleh Qaysi, Bassam Abuamarah, Neil Lennart Anderson

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The seismogenic characteristics of the Gulf of Aqaba zone have been assessed using the maximum likelihood method to estimate various earthquake recurrence parameters. These parameters encompass the β-value, annual recurrence rate (λ), and maximum probable magnitude (Mmax). This assessment has identified three sub-seismogenic zones, each corresponding to specific structural faults within the Gulf. These zones are associated with the Aragonese, Arnona and Aqaba faults, delineating pull-apart basin structures in the Gulf of Aqaba. An updated earthquake catalogue has been compiled using a unified moment magnitude (Mw) scale to improve the analysis, established by developing two empirical relationships. According to the …

Cfd Study On Two-Phase Flow Patterns In A Pipe With 90º Elbow In Different Operating Conditions, Hagar Alm-Eldin Bastawissi, Mohammed Ahmed Khafagy, E. A. El Shenawy Prof. Dr., Ahmed M. Salem Dr

Journal of Engineering Research

Recently, CFD has offered a technological solution for modelling multi-phase flow in which we can make endless simulations with reduced expenses and effort in high accuracy results; we shall also mention that experimental studies have limitations for safety considerations when experimenting with flow in high temperature or pressure values or medium nature as in nuclear or chemical flows.In this paper, we used the ANSYS FLUENT CFD program to simulate the two-phase flow in a pipe to study the effect of attaching a 90-degree elbow fitting to the piping system, seeking to find out the change in the pattern and resulting …

Recent Advances In Solar Photo(Electro)Catalytic Nitrogen Fixation, Jun-Bo Ma, Sheng Lin, Zhiqun Lin, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

Ammonia (NH₃) is an essential chemical in modern society. It is currently produced in industry by the Haber-Bosch process using H₂ and N₂ as reactants in the presence of iron-based catalysts at high-temperature (400–600 ^oC) and extremely highpressure (20–40 MPa) conditions. However, its efficiency is limited to 10% to 15%. At the same time, a large amount of energy is consumed, and CO₂ emission is inevitably. The development of a sustainable, clean, and environmentally friendly energy system represents a key strategy to address energy crisis and environmental pollution, ultimately aiming to achieve carbon neutrality. …

Investigation Of Gas Dynamics In Water And Oil-Based Muds Using Das, Dts, And Dss Measurements, Temitayo S. Adeyemi

LSU Master's Theses

Reliable prediction of gas migration velocity, void fraction, and length of gas-affected region in water and oil-based muds is essential for effective planning, control, and optimization of drilling operations. However, there is a gap in our understanding of gas behavior and dynamics in water and oil-based muds. This is a consequence of the use of experimental systems that are not representative of field-scale conditions. This study seeks to bridge the gap via the well-scale deployment of distributed fiber-optic sensors for real-time monitoring of gas behavior and dynamics in water and oil-based mud. The aforementioned parameters were estimated in real-time using …

Understanding Effective Elastic Properties And Stress-Strain Evolution In Composite Granular Rocks Using Discrete Element Modeling, Prasad Pothana, Fernando E. Garcia, Kegang Ling

Petroleum Engineering Posters and Presentations

The mechanical behavior of composite granular rocks is a multifaceted phenomenon relevant to various geoengineering applications. Traditional homogenization models and continuum mechanics-based numerical methods often fall short of accurately capturing the intricacies of granular materials. Granular materials exhibit heterogeneity and arching mechanisms governing the force networks that ensure system stability. Unlike continuum-based approaches, particulate discrete element methods have an advantage in assessing effective material properties by considering material heterogeneity and grain-level physical interactions. This study evaluates effective elastic properties using particle flow code using flat-joint contact law for composite binary mixtures with a stiff inclusion embedded within a matrix material. …

Harnessing Nanocellulose For Sustainable Carbon Capture: Synthesis, Processing, And Performance Evaluation, Jerred C. Wassgren

Doctoral Dissertations

Scientists and governments have recognized the need for environmental remediation, most notably with the adoption of the Paris Agreement in 2016. One of the major concerns is the production of greenhouse gases (GHGs). The major GHG is carbon dioxide (CO₂) in which humans emit over 36 gigatons yearly. Atmospheric CO₂ is responsible for 60% of the heat retained by the earth – resulting in rising temperatures, melting ice caps, and increasing ocean acidification. Therefore, a major goal of the Paris Agreement was to reduce GHG emissions as well as the capture of CO₂ from the atmosphere. …

Challenges And Opportunities In Electrification Of Adsorptive Separation Processes, Abdullah Al Moinee, Ali A. Rownaghi, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

A global energy transition from fossil-based to renewable-based systems requires advancements in various energy sectors. Current chemical separation processes are quite energy-intensive and require significant advancement to make this transition happen. In the energy transition era, reducing the dependency of separation processes on fossil-based thermal energy seems inevitable for transitioning smoothly and meeting the stringent timelines. In particular, adsorption-based separation processes have the potential to be fully electrified through innovative strategies in developing stimuli-responsive adsorbents and swing processes. In this review, we discuss the recent efforts in electrification of adsorption processes and provide an overview of emerging materials and processes. …

Highly Efficient Dopamine Sensing With A Carbon Nanotube-Encapsulated Metal Chalcogenide Nanostructure, Harish Singh, Jiandong Wu, Kurt A.L. Lagemann, Manashi Nath

Chemical and Biochemical Engineering Faculty Research & Creative Works

Carbon nanotube-encapsulated nickel selenide composite nanostructures were used as nonenzymatic electrochemical sensors for dopamine detection. These composite nanostructures were synthesized through a simple, one-step, and environmentally friendly chemical vapor deposition method, wherein the CNTs were formed in situ from pyrolysis of a carbon-rich metallo-organic precursor. The composition and morphology of these hybrid NiSe2-filled carbon nanostructures were confirmed by powder X-ray diffraction, Raman, X-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy images. Electrochemical tests demonstrated that the as-synthesized hybrid nanostructures exhibited outstanding electrocatalytic performance toward dopamine oxidation, with a high sensitivity of 19.62 μA μM-1 cm-2, low detection limit, broad linear …