Chemistry Commons^™

The Reveal: A Technical Study And Conservation Treatment Of An Overpaint Portrait, Camille Ferrer

Art Conservation Master's Projects

A severely damaged 19th-century oil painting depicting a portrait of a woman was treated at Patricia H. and E. Garman Art Conservation Department. A typed letter provided by the owner mentioned that it has been previously restored yet returned with unsatisfactory results. After further examination, the painting appeared to have been previously treated multiple times by different people. There was overpaint distinctly present on the face and later discovered to be present overall. The full state of condition of the painting was initially unknown due to the sum of the surface being overpainted. However, there were evidence of paint loss …

Highly Toxic Aβ Begets More Aβ, Merc M. Kemeh, Noel Lazo

Chemistry

No abstract provided.

Application Of Functionalized Organosilicas In Adsorption Of Nitrates, Stephen Amoako

Electronic Theses and Dissertations

This study addresses the critical environmental issue of elevated nitrate levels in water bodies, primarily due to excessive use of nitrogenous fertilizers and improper waste disposal. It focuses on reducing nitrate concentrations in polluted water to permissible levels through the effectiveness of hybrid materials in nitrate adsorption. We synthesized nine amino-functionalized adsorbents using grafting and sol-gel techniques. Batch adsorption tests confirmed the high nitrate adsorption capacities of these adsorbents, with sol-gel materials showing the highest efficiency due to their abundant amino group contents. Among these, the surfactant-free, sol-gel adsorbent was the most effective, combining ease of synthesis with cost-efficiency. Our …

Excited State Processes In Radical Elaborated Platinum Donor-Acceptor Complexes, Sangita Paudel

Chemistry and Chemical Biology ETDs

Organo-transition metal complexes are being widely studied to understand their photophysical properties for their wide range of applications as efficient emitters in organic light emitting diodes (OLEDs), light emitting electrochemical cells (LEECs), etc. Cyclometalated organo-transition metal complexes such as cyclometalated square planar platinum(II) complexes are becoming suitable candidates for such applications because of their highly efficient luminescence. Understanding the excited properties of such complexes is useful in designing highly efficient and color tunable phosphors with desired excited state lifetimes. We aim to explore the influence of radical substituents on electronic structure, luminescence quantum efficiencies, and excited state lifetimes by synthesizing …

Tribocorrosion And Metal Release From Austenitic Stainless Steels 304 And 201 In Simulated Cassava Food Contact, Robert Addai, Temitope E. Olowoyo, Thalia E. Standish, Jeffrey Daniel Henderson, Ubong Eduok, Yolanda Hedberg

Chemistry Publications

Cassava is the third most significant calorie source in the tropics. Its processing has changed from traditional methods to stainless steel processing machines. This study investigated the influence of cassava on metal release from two common stainless steels, ASTM 304 and 201, with and without friction, and on tribocorrosion (multianalytically) of 304. Cassava was relatively corrosive and hindered repassivation of the surface oxide of stainless steel, but it also acted as a lubricant against mechanical friction. The combined action of friction and cassava caused a significant increase in iron, chromium, nickel, and manganese release from the stainless steels (30–35- fold …

Spectroscopic Characterization, Dft Calculations, In Vitro Pharmacological Potentials, And Molecular Docking Studies Of N, N, O-Schiff Base And Its Trivalent Metal Complexes, Ikechukwu P. Ejidike, Amani Direm, Cemal Parlak, Adebayo A. Adeniyi, Mohammad Azam, Athar Ata, Michael O. Eze, Joshua W. Hollett, Hadley S. Clayton

Michigan Tech Publications, Part 2

In this study, trivalent metal complexes of the category: [M(L)(H2O)nCly] obtained from the interaction of metal3+ ion salts with organic N, N, O-Schiff base (HL) (where: HL = 4-{(Z)-((2-{(E)-((2-hydroxyphenyl)methylidene)amino}ethyl)imino)methyl}-2-methoxyphenol; n, y = 1 or 2 and M = Ti(III), Fe(III), Ru(III), Cr(III) and Al(III)) were synthesized and characterized viz molar conductance, FT-IR, and UV–Vis spectroscopies, elemental analyses, thermal analyses (TGA and DTA), and UV–Vis spectroscopy, theoretical calculations. A distorted octahedral structure around the metal ions was proposed based on the obtained experimental and calculated data. Thermal examination of the complexes signposts the step-by-step disintegration to give the final decomposition product …

Hydrothermal Synthesis Of (C5h14n2)[Cocl4]⸳0.5h2o: Crystal Structure, Spectroscopic Characterization, Thermal Behavior, Magnetic Properties And Biological Evaluation, Sandra Walha, Noureddine Mhadhbi, Basem F. Ali, Abdellah Kaiba, Ahlem Guesmi, Wesam Abd El-Fattah, Naoufel Ben Hamadi, Mark M. Turnbull, Ferdinando Costantino, Houcine Naïli

Chemistry

The organic-inorganic compound (C₅H₁₄N₂)[CoCl₄]⸳0.5H₂O, I, was characterized by various physicochemical techniques. The X-ray diffraction analysis revealed that the compound crystallizes in the centrosymmetric space group C2/c of the monoclinic system. The atomic arrangement the Co(II) complex is built from isolated [CoCl₄]^2– anions, 1-methylpiperazine-1,4-diium [C₅H₁₄N₂]²⁺ cations and free water molecules. The crystal structure study showed that the cohesion of I is assured through N–H···Cl and N–H···O hydrogen bonds giving birth to a 3-D architecture. Hirshfeld surface analysis revealed that Cl···H/H···Cl and …

Positron Emission Tomography In Oncology And Environmental Science, Samantha Delaney

Dissertations, Theses, and Capstone Projects

The last half century has played witness to the onset of molecular imaging for the clinical assessment of physiological targets. While several medical imaging modalities allow for the visualization of the functional and anatomical properties of humans and living systems, few offer accurate quantitation and the ability to detect biochemical processes with low-administered drug mass doses. This limits how physicians and scientists may diagnose and treat medical issues, such as cancer, disease, and foreign agents.

A promising alternative to extant invasive procedures and suboptimal imaging modalities to assess the nature of a biological environment is the use of positron emission …

Non-Destructive Determination Of Surface Area In Reverse Phase Chromatographic Columns, Margaret Figus

Seton Hall University Dissertations and Theses (ETDs)

Excess adsorption isotherms of acetonitrile and methanol from water were measured on eight commercial columns. Columns used in this study represent the latest examples in column development and include three different poroshell columns (Kinotex C18, Ascentis C18, and Halo C18) as well as conventional columns with significantly different adsorbent geometries (Allure C18, YMC C18) and various hybrid-silica columns (Gemini C18, Xterra C18, and XBridge C18). Comparison of the excess adsorption isotherms measured on all these columns and expressed in surface-specific form demonstrated significant similarity of the adsorption properties of all columns, which allows the introduction of the Standard Excess Adsorption …

Analysis Of The Effect Of Different Surface Preparation Methods On Corrosion Resistance And Adhesion Strength Of Astm A36 Steel Substrate With Surface Tolerant Epoxy Paint As Coating Material, Irwan Wijaya Santoso, Daffa Aqila, Rini Riastuti, Rizal Tresna Ramadhani

Journal of Materials Exploration and Findings

In the industrial world, to extend the service life of materials, protection methods are carried out to slow down the material's corrosion rate. The protection method that is often used is the coating method. The coating method is a protection method by coating the substrate material using a coating material to prevent contact between the substrate material and the environment. In this research, the substrate material used is ASTM A36 steel and the coating material used is Surface Tolerant Epoxy paint. The independent variable used in this study lies in the surface preparation method which consists of: solvent cleaning, hand …

Effects Of Ti Addition On The Characteristics Of Al-10zn-6mg-2si/Zro2 Composites Produced By Squeeze Casting, Qesha Diva Prameshvara, Pipin Indah Lestari, Bondan Tiara Sofyan

Journal of Materials Exploration and Findings

Metal matrix composite (MMC) with 7xxx aluminum matrix is potential for ballistic applications due to the combination of strength, toughness, and light weight. Previous study successfully produced aluminum-based composites with SiC particles which were able to stop type III bullet, however cracks remained on back of the plate. Therefore, in this research, SiC was replaced by zirconia (ZrO₂) due to its high fracture toughness. Ti-B grain refiner was added to further improve toughness through grain boundary strengthening mechanism. This research developed 5 vol.% ZrO₂ strengthened Al-10Zn-6Mg-2Si composite with addition of Al-5Ti-1B grain refiner produced through squeeze casting …

Advancing Coupled Cluster Methods: Tensor Factorization And Analytic Gradient Implementation, Tingting Zhao

Chemistry Theses and Dissertations

With the rapid advancement of computing capabilities, computational chemistry has become increasingly indispensable in both experiment design and the interpretation of experimental outcomes. Wave-function-based quantum mechanistic methods are highly sought after for their ability to provide high-accuracy data and their potential for systematic improvement. However, to extend their applicability to larger molecules, it is essential to employ rank-reducing approximations to these methods. This dissertation dedicates Chapters Three and Four to the development of rank-reduced methodologies. Additionally, beyond single-point energies, molecular geometries and properties of molecule-excited states hold paramount importance across diverse fields of chemistry. Hence, Chapter Five presents the work …

Removal Of Phenol From Oilfield Produced Water Using Non-Conventional Adsorbent Medium By An Eco-Friendly Approach, Salem Jawad Alhamd, Mohammed Nsaif Abbas, Hassan Jameel Jawad Al-Fatlawy, Thekra Atta Ibrahim, Zaid Nsaif Abbas

Karbala International Journal of Modern Science

Petroleum extraction generates substantial quantities of produced water, a challenge compounded by water scarcity in oil-producing regions, notably the Middle East. Leveraging produced water effectively, adhering to environmental standards, can offer a viable solution to the issue of water scarcity. This study explores the potential of mandarin peels as an available, cost-effective adsorbent for treating synthetic aqueous solution simulated to oil-field produced water, specifically targeting phenol, a dangerous pollutant. Employing a batch-mode adsorption unit, six operational factors—phenol concentration, acidity, agitation speed, contact time, adsorbent dose, and temperature—were investigated. Results revealed an inverse relationship between phenol removal and pH, concentration, and …

The Effect Of Metabolic Modulators On The Rate Of Steady State Water Exchange In S. Cerevisiae Grown In Chemostat Bioreactors, Samantha Mumford, Mark Woods, Johnathan Dutra

Student Research Symposium

Water transport across the lipid bilayer due to osmotic stress causes a change in intracellular volume over time. At isotonic equilibrium there is no change in cell volume and yet water exchange does not stop. Water molecules continue to exchange rapidly with those of the extracellular space. The rate constant for steady state water efflux (k_io) can be measured using contrast enhanced magnetic resonance (MR) and the two-site exchange (2SX) model. k_io is known to correlate with the cellular energy molecule ATP making it a probable biomarker for metabolic diseases such as cancer. Measurements of k …

Computationally Assisted Mechanistic Analysis Of The Protonolysis Of A Pt–Me Bond, Clement Dasilva

Student Research Symposium

Mechanistic study of the protonolysis of (cod)PtMe2 could give insight into the activation of C-H bonds by platinum because it is the microscopic reverse reaction. Two possible mechanisms for the protonolysis of dimethyl platinum complexes have been proposed, with experimental and computational data supporting the single step, SE2, over the multistep, SE(ox) mechanism. New experimental work from our group supports a multi-step mechanism with multiple acid molecules. In this work, the SE2 mechanism as well as a proposed SE(ox) mechanism were computationally modeled with a single equivalent of acid, TFAH, and two equivalents using density functional theory. The modeled pathways …

Multiscale Variability Of Heavy Metals In A Western U.S. Snowpack, Kelsey Hefner

Student Research Symposium

Natural and anthropogenically sourced particulates are deposited from the atmosphere to landscapes via dry and wet deposition, making frozen winter snowpack a natural archive of atmospheric elemental composition. Wildfires in the Western United States are increasing in extent, duration, and severity, especially in alpine regions. Severe fires remove forest canopy and can impact how atmospheric elements are dispersed and stored across snow-dominated watersheds. We evaluated Al, V, Cr, Mn, Ni, Cu, As, Zn, Se, Mo, Cd, and Pb concentrations in 394 winter snow core samples. We collected samples in 2019 and 2020 from a chronosequence of eight forests that burned …

Method Validation Of Metals In Environmental Soil Samples, Sofia Deangelis, Nana Nguyen

Student Research Symposium

Vehicles are a major source of metal accumulation in terrestrial environments. Green infrastructure, such as bioswales, has been implemented as a way to mitigate this damage. However, there is a limited understanding of the processes that occur in these bioswales as few go back after implementation to identify areas in the bioswale with accumulation of pollutants. Inductively coupled mass spectrometry (ICP-MS) has the potential to be used in this type of study due to the machine’s high sensitivity and selectivity. However complications can arise while using the ICP-MS to characterize complex environmental samples. This study seeks to optimize microwave assisted …

Competing Supramolecular Forces: Boron Coordination Vs Π-Π Stacking, Sidhaesh A. Agarwal, Gonzalo Campillo-Alvarado, Nicholas Lutz, Jesus Daniel Loya, Eric W. Reinheimer

Student Research Symposium

This study explores the impact of fluorination levels in azopyridine Lewis bases on their ability to direct the formation of B←N coordination adducts or cocrystals with phenylboronic ester. We hypothesize that the degree of fluorination can be used as a tool to control the outcome of supramolecular bonding competition, thus influencing complex self-assembly.

A series of azopyridines with varying degrees of fluorination were synthesized and reacted with phenylboronic ester. Their structures were analyzed using Hartree-Fock calculations, Hirshfeld surface analyses, and single crystal X-ray diffraction to assess the impact of fluorination on supramolecular interactions.

The study reveals that azopyridines with up …

Photocathodes From Aerobic Oxidation Of Tellurorhodamines, Amelia Jellison

Student Research Symposium

Contemporary dye-sensitized solar cells are far less efficient than silicon solar panels, therefore this project seeks to develop an improved dye sensitized photocathode. Tellurorhodamine dyes, including mesityl derivatives and tellurium black, have been chosen to increase efficiency through increased light harvesting. The photophysical and electrochemical properties of tellurorhodamines with varying structures are analyzed to quantify its efficiency to serve as a dye sensitized photo cathode. Dyes undergo aerobic oxidation facilitated by light, the absorption profile is obtained before and after. Mesityl derivatives are known to experience significant red-shifting following aerobic oxidation. At its base oxidation state, tellurium black experiences an …

An Overview Of How To Measure The Kinetic Properties Of An Anode Material For The Chlorine Evolution Reaction, Cameron Vann

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

The process of generating chlorine gas using electrolysis in aqueous systems is well established. However, a new process requires chlorine to be generated at high temperatures using molten salt. This harsh environment requires a new study of anode materials for the chlorine evolution reaction. Anode materials can be compared by their kinetic parameters, the transfer coefficient α and the exchange current i0. The basic theory of these properties as they relate to the chlorine evolution reaction has been detailed and an analysis method for finding these effective parameters has been shown and demonstrated.