An Overview Of Digital Intraoral Scanners: Past, Present And Future- From An Orthodontic Perspective, Henry Hann-Min Hwang, Chi-Wei Chou, Yi-Jane Chen, Chung-Chen Jane Yao

Taiwanese Journal of Orthodontics

Digital intraoral scanners(IOSs) have become the ongoing trend in contemporary digital orthodontics. This article aims to elaborate the past, present, and future of IOSs from an orthodontist’s perspective. We summarized the comparison between digital and conventional impression in literatures. Also, we discussed about the imaging principles and characteristics of different IOSs. Although unable to recommend the single best option, a checklist of consideration when choosing an IOSs was developed after trailing the mainstream commercial products. With technology revolution, embracing the IOSs may be essential for those interested in future digital orthodontic workflow.

Orthodontic Treatment Management For Congenitally Missing Maxillary Lateral Incisors, Yu-Ting Sun, Tao-Wei Chang, Po-Yu Yang, Tzu-Hsin Lee

Taiwanese Journal of Orthodontics

Congenitally missing of maxillary lateral incisor is one of the most common agenesis anomalies. The purpose of this review was to present the orthodontic treatment of choice for a malocclusion with missing maxillary lateral incisors. Treatment plans consist of three categories: canine substitution, single-tooth implant and tooth supported restorations. Among which the least invasive option to achieve satisfying function and aesthetics is canine substitution. Factors such as the profile of the patient, the space analysis of dentition, and the color and shape of canine should be taken into consideration for treatment choice.

Surgical-Orthodontic Correction In Skeletal Class Iii Anterior Open Bite With An Ankylosed Maxillary Molar, Chin Suppapinyaroj, Ellen Wen-Ching Ko, Yu-Ray Chen

Taiwanese Journal of Orthodontics

This case report describes the treatment of a 24-year-old woman with chief complaints of anterior open bite and long lower jaw. She had a skeletal Class III with concave facial profile, hyperdivergent facial pattern, long lower facial height, and excessive anterior open bite. Intraoral examination revealed 26 tooth ankyloses and 32, 42 congenital missing teeth. The 26 was highly-locked, showing root penetrating into the sinus floor. Treatment was performed with a modified surgery-first approach, which included 5 months of presurgical alignment phase to upright the 27 mesially-tilted tooth and to correct upper dental midline by 14 extraction. The surgeries included …

Rapid Maxillary Alveolar Expansion In Maxillary Severe Space Deficiency, Mei-Yin Chen, Wen-Ken Tai, Heng-Ming Mark Chang, Hoi-Shing Luk, Chia-Tze Kao

Taiwanese Journal of Orthodontics

Although maxillary skeletal palatal expansion was efficient to correct the transverse dental deficiency, the conventional maxillary palatal expansion is still effective in some cases. This case report describes the orthodontic treatment procedure of a 15-year-old female patient who was diagnosed as Angle’s Class I malocclusion with severe space deficiency. The space deficiency of 11 mm was noted in maxillary arch in conjunction with severe overjet, blocked-in lateral incisors, high maxillary vault, posterior crossbite and V shape arch-form. The treatment plan presented non-extraction with rapid maxillary alveolar expansion in upper arch. The Hyrax expander was used in a rhythm of 2 …

Orthodontic Treatment Combined With Maxillary Posterior Subapical Osteotomy In Severe Anterior Open Bite, Jui-Hsien Yang, Yun-Yun Wu

Taiwanese Journal of Orthodontics

A 29-year-old woman presented with severe anterior open bite (−6 mm). Eight-month presurgical orthodontic treatment involving arch rounding and leveling was performed, with the upper arch treatment from canine to canine only. Bilateral maxillary posterior subapical osteotomy (PSO) for posterior intrusion was performed for 6-week fixation. Postsurgical orthodontic treatment followed, resulting in a total treatment time of 19 months. Cephalometric X-ray superimposition revealed that the anterior overbite was corrected by 9 mm (from -6mm to +3 mm), and the lower mandibular plane angle changed from 38.4° to 35.4°. Therefore, counterclockwise rotation of the mandible improved the facial profile. In conclusion, …

Accuracy Of A Smartphone-Based Orthodontic Treatment Monitoring Application, Heather Moylan

Theses and Dissertations

Objectives: Dental Monitoring® (“DM,” Dental Monitoring, Paris, France), is a cloud-based software that allows orthodontists to track patients’ treatment remotely. The purpose of this study was to investigate the accuracy of the software in making linear measurements.

Methods: Patients took intraoral photographs using the DM application, immediately followed by impressions for plaster models. Intercanine and intermolar width and arch depth measurements were made by DM and compared to measurements made on the plaster models. Data was analyzed using two one-sided t-tests for equivalence with equivalence bounds of

+/-0.5mm. Significance level was set at 0.05.

Results: Thirty sets of measurements were …

Comparison Of Hiring Strategies Of Orthodontic Private Practitioners, Steven C. Petritz

Theses and Dissertations

COMPARISON OF HIRING STRATEGIES OF ORTHODONTIC PRIVATE PRACTITIONERS

By Steven C. Petritz, D.D.S.

A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science in Dentistry at Virginia Commonwealth University

Virginia Commonwealth University, 2018

Thesis Director: Bhavna Shroff, D.D.S., M.Dent.Sc., M.P.A.

Virginia Commonwealth University Department of Orthodontics Program Director

Purpose: Evaluate factors that influence hiring outcomes of clinical and non-clinical staff in orthodontic private practices.

Methods: Orthodontists (n=1968) were surveyed regarding their hiring methods and outcomes. Responses were summarized using descriptive statistics. Chi-square tests were used to compare between hiring strategies and outcomes. …

Evaluation Of Fit For 3d Printed Retainers As Compared To Thermoform Retainers, David J. Cole

Theses and Dissertations

ABSTRACT

EVALUATION OF FIT FOR 3D PRINTED RETAINERS AS COMPARED TO THERMOFORM RETAINERS

By David Cole, D.M.D.

A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science in Dentistry at Virginia Commonwealth University

Thesis Directors: Eser Tüfekçi, D.D.S., M.S., Ph.D., M.S.H.A.

Professor, Department of Orthodontics

Sompop Bencharit, D.D.S., M.S., Ph.D.

Associate Professor and Director of Digital Dentistry, Department of General Practice

Introduction: Despite recent advances in three-dimensional (3D) printing, little information is available on 3D printed retainers

Methods: Three reference models were used to fabricate traditional vacuum formed, commercially-available vacuum formed, and 3D printed …

Orthodontists’ And Patients’ Preferences In Website Design In The Selection Of An Orthodontic Practice: A Comparative Study, Taylor R. Brown

Theses and Dissertations

Objective: To determine which website characteristics are preferred by orthodontists, adult patients, and parents of patients.

Materials and Methods: 1,000 active members of the American Association of Orthodontists and 750 active orthodontic patients/parents were sampled. Participants rated the importance of website characteristics, indicated presence of those characteristics on the current website, and ranked sample website images. Preferences were compared between orthodontist and the patient/parent group using t-tests and sample websites were compared using ANOVA models and Tukey’s adjusted post-hoc tests. Significance level was set at 0.05.

Results: 11 of the 16 website features showed significant differences between patients/parents and orthodontists. …

The Effect Of Mechanical Vibration On Pain And Rate Of Tooth Movement During Initial Orthodontic Alignment, Leslie Ellingson

Theses & Dissertations

Purpose: The purpose of this investigation was to evaluate the effect of mechanical vibration on pain experienced and rate of tooth movement (OTM) during the initial alignment phase of orthodontic treatment.

Materials and Methods: Participants were randomly allocated to control, low frequency or high frequency. An electric toothbrush was modified to provide high frequency vibration. A low frequency vibration device was acquired from a commercial vendor. Experimental groups applied vibration to the dentition for 20 minutes daily. All participants completed questionnaires using visual analog scales at five time points. Pain experience was measured in millimeters (mm) with the scale measuring …

Factors Associated With Orthodontically Induced Apical Root Resorption Of Maxillary Incisors, Brandon Malan

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: Resorption of root apices is a ubiquitous occurrence in orthodontic treatment. Although most occurrence of resorption during orthodontic treatment is clinically inconsequential, a small percentage of patients have a severe amount of root structure that is lost. There are factors that are widely accepted as responsible for apical root resorption (RR), such as heavy compressive forces on the periodontal ligament (PDL). Unfortunately, it is still largely unpredictable if one patient will experience more root loss than what is considered normal. Thus, it is of clinical interest to further study what factors play a role in RR. Purpose: The purpose …

Comparison Of Tooth Length Measurements Made On Cbct And 3t Mr Images, Danielle A. Piano

Loma Linda University Electronic Theses, Dissertations & Projects

Objective: The aim of this study is to compare tooth length measurements made on cone beam computed tomography (CBCT) scans and 3-Tesla (3T) magnetic resonance (MR) scans. Materials and Methods: One CBCT scan (NewTom5G, AFP Imaging, USA) and one 3T MR scan (Siemens Medical Solutions, DE) as performed on 12 subjects. CBCT images were captured with an 18x16 inch field of view that covered the whole head. Contiguous sagittal MR images of the whole head were produced in a 3.0T imaging system with a T1-weighted 3D imaging sequence (Magnetization Prepared Rapid Acquisition by Gradient Echo (MP-RAGE), TP/TE = 1950/2.26 ms) …

Prediction Of Root Form Using Crown Data: Mandibular Left First Premolar, Matthew E. Durschlag

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: The purpose of this study was to determine if a statistical shape model (SSM) of the lower left first premolar, consisting of both crown and root data, could adequately describe the root form from a surface scan consisting of only crown data. Secondly, it tested if there were any angles or measurements on the tooth crown that correlate with any aspects of root morphology. The average orthodontist practicing today or in the near future is likely to use or own a digital intraoral scanner in their office. Yet optical scans only allow visualization of the crowns of teeth and …

Effects Of Wire Material, Deflection, And Interbracket Distance On Burstone Bracket Geometry Force Systems, Skyler J. Liatti

Loma Linda University Electronic Theses, Dissertations & Projects

Objective. This paper aims to quantify the effect of wire material, dimension, and deflection on the most identifiable feature of the six-geometries: the moment dissociation point (force system with no moment on the lesser angled bracket), which may or may not occur at the classically defined geometry IV. Materials and Methods. A six-degree of freedom load cell was used to measure the force systems in different combinations of wire materials, wire dimensions, total angle of bracket, and interbracket distance. Brackets were progressively rotated through Burstone and Koenig’s six geometries and the moment on the right bracket was plotted against the …

Effects Of Palatal Expansion On Speech Production, Jason Milton Meinhardt

Master's Theses (2009 -)

Introduction: Rapid palatal expanders (RPEs) are a commonly used orthodontic adjunct for the treatment of posterior crossbites. RPEs are cemented to bilateral posterior teeth across the palate and thus may interfere with proper tongue movement and linguopalatal contact. The purpose of this study was to identify what specific role RPEs have on speech sound production for the child and early adolescent orthodontic patient. Materials and Methods: RPEs were treatment planned for patients seeking orthodontics at Marquette University. Speech recordings were made using a phonetically balanced reading passage (“The Caterpillar”) at 3 time points: 1) before RPE placement; 2) immediately after …

The Effect Of Heat Treatment On The Bending Properties Of A Cobalt-Chromium Orthodontic Wire, Alex Schwab

Master's Theses (2009 -)

Introduction: Elgiloy, a brand name of the original cobalt-chromium orthodontic wire, has been around for more than 50 years; yet despite this, little literature is available. Most of the literature on Elgiloy wires tends to evaluate the wires in tension. For these reasons, this study aimed to determine the bending properties of the four available tempers of Elgiloy wires and how heat treatment affects the wires’ bending properties. Materials and Methods: All four tempers of Elgiloy (red, yellow, green, and blue) were ordered in straight lengths containing 20 wires per pack that are each 0.018 inches in diameter and 14 …

Reliability Of Digital Dental Cast Measures As Compared To Cone-Beam Computed Tomography For Analyzing The Transverse Dimension, Brian Michel

Master's Theses (2009 -)

The purpose of this study was to assess the consistency in diagnosing the transverse dimension on cone-beam computed tomography (CBCT) images as compared to digital dental models. The study consisted of 11 patients with posterior crossbite at the level of the first molar and 17 patients with no crossbite at the level of the first molar. 13 patients were male and 15 patients were female with an overall mean age of 13.6 years. Eight linear measurements and two angular measurements were made on CBCT images of the patients and six linear measurements were made on the corresponding digital dental casts. …

Thermal Properties Of Commonly Used Clear Aligner Systems As-Received And After Clinical Use, Louis Wenger

Master's Theses (2009 -)

Background/Objectives: The purpose of this study was to investigate the thermal properties, particularly glass transition temperature, of the polymers that are used to fabricate three different types of modern orthodontic aligners. Invisalign, (Align Technology, Inc, Santa Clara, CA, USA), Simpli5 (Allesee Orthodontic Appliances, Sturtevant, WI, USA), and ClearCorrect (ClearCorrect, Round Rock, TX, USA) were examined both as-received and after clinical use to determine if any differences were present both between and within aligners. Materials/Methods: Orthodontic aligners were collected from three different patients using the systems under investigation after two weeks of intraoral use. Duplicate, un-used samples were obtained from the …

Direct Visual Approximation Of Arch Length Discrepancy And Cephalometric Measurements, Bradley J. Wurm

Master's Theses (2009 -)

Introduction: Arch length discrepancy and cephalometric analysis are critical components of orthodontic treatment planning. Both have direct effects on the decision to extract teeth or not and treatment mechanics as well. Visual approximation is the most common method used to analyze arch length discrepancy among practitioners. Current trends show a decrease in the amount of orthodontists completing a cephalometric analysis. Previous studies have shown a tendency for orthodontists to overestimate the degree of crowding when visually approximating on dental casts. No previous study has assessed the ability to visually approximate cephalometric angle measurements. The purpose of this survey was to …

A Retrospective Lateral Cephalometric Growth Study Of Sagittal Airway Changes, Grace H. Woo

Loma Linda University Electronic Theses, Dissertations & Projects

Purpose: This study retrospectively examined the average sagittal dimensions in the pharyngeal airway from skeletal and dental Class I males and females from 7 to 16 years of age utilizing longitudinal data from the American Association of Orthodontists Foundation Craniofacial Growth Legacy Collection. The study evaluated whether average sagittal airway dimensions differed between males and females at each age, and whether the sagittal airway dimension changed with increasing age. Materials and Methods: Sagittal airway dimension based on identifiable anatomical landmarks were digitally traced and measured from the longitudinal lateral cephalograms of 30 females and 32 males from the AAOF Growth …

Orthodontists' And Parents' Perspective Of Occlusion In Varying Anterior-Posterior Positions: A Comparative Study, David H. Lindsey

Theses and Dissertations

Objective: The purpose was to compare orthodontists’ and parents’ perception of orthodontic treatment outcomes in the anterior-posterior (AP) dimension. Assessment of treatment time and compliance were also investigated.

Material and Methods: Parallel surveys for orthodontists (n=1000) and parents (n=750) displayed occlusions from 3 mm Class III (Cl III:3) to 3 mm Class II. Participants rated occlusal relationships on a 100 mm VAS from least to most acceptable (0-100).

Results: 233 orthodontists (23%) and 243 parents (32%) responded. Orthodontists (mean=93.9, 25.9) and parents (mean=80.7, 40.9) rated Class I (Cl I) occlusion most and Cl III:3 least acceptable. No significant difference was …

The Use Of Oral Appliances For Obstructive Sleep Apnea-Hypopnea Syndrome (Osahs ), You-Ning Gao, Jenny Zwei-Chieng Chang, Ming-Hsien Lan, Wen-Chung Chang, Yuan-Yi Tung

Taiwanese Journal of Orthodontics

The obstructive sleep apnea–hypopnea syndrome (OSAHS) is a common sleep-related breathing disorder characterized by repetitive obstructions of the upper airway during sleep. Nasal continuous positive airway pressure (CPAP) is the primary choice of treatment for OSAHS, but many patients are unable or unwilling to comply with the treatment. The modification of pharyngeal patency by oral appliances (OA) is an alternative treatment for OSAHS. This article provides a brief review and information of the oral appliance application in treating OSAHS.

Non-Surgical Treatment For A Patient With Angle Class Ii Division 2 Malocclusion With Severe Deep Bite: A Case Report, Yuan-Jung Wang, Jia-Iin Chang, Aaron Yu-Jen Wu, Ren-Jye Chen, Shiu-Shiung Lin, Te-Ju Wu

Taiwanese Journal of Orthodontics

This report describes a non-surgical orthodontic treatment for a 36-year-old male patient who had Class II division 2 malocclusion (Class II/2) with deep bite more than 100%, gingival recession, and periodontal abscess in the mandibular anterior region. Patient had history of trauma in region. The surgical intervention was once suggested but was refused by the patient. The compromised but acceptable final results were achieved by nonsurgical approach. The treatment plan included periodontal control, maxillary incisor intrusion and restoration of the collapsed occlusion. The total treatment duration was 43 months. The patient was satisfied with the treatment outcomes via interdisciplinary approach …

The Orthodontic Treatment Of Bilateral Impacted Maxillary Canines - A Case Report, Yu-Hsuan Chang-Chien, Li-Tyng Sun, Te-Ju Wu, Chia-Ling Tsai, Wei-Yung Hsu, Shiu-Shiung Lin

Taiwanese Journal of Orthodontics

The maxillary canine impaction is a specific topic in orthodontic treatment. Because of its important role in esthetics and occlusal function, preservation and alignment of the impacted canine would always be the priority in teenage orthodontics. In addition to the routine analysis of the space distribution for the impacted canines, orthodontists should also consider the growth potential to achieve proper treatment outcome. This case report presents the orthodontic treatment of a 14-year-old boy with bilateral maxillary canine impaction. With fixed orthodontic appliance, the bilaterally impacted canines were successfully aligned into maxillary dentition with good interdigitation. The prevalence, etiology and the …

Relationship Of The Surface Electromyography In Masticatory Muscles With The Vertical Facial Patt Erns And Orthodontic Tooth Movement, Carol Yi-Hsuan Chen, Ellen Wen-Ching Ko

Taiwanese Journal of Orthodontics

Introduction: Controversy about the relationship among masticatory muscles, craniofacial morphology and the orthodontic anchorage preparation has not yet been clarified in the literatures. The purpose of this study was to evaluate whether the vertical facial patterns and masticatory surface electromyography (sEMG) influence the molar anchorage and characteristic orthodontic tooth movement. Methods: Subjects for this study comprised 18 patients with a mean age of 23.7 years who had completed orthodontic treatment with therapeutic symmetric extraction. The sEMG data were acquired at the time of bracket debond. The sEMG of anterior temporalis and masseter muscles were recorded during the rest position and …

Camouflage Treatment In Adult Patient With Mandibular Lateral Displacement, Transverse Deficiency And Facial Asymmetry – A Case Report, Yu-Ling Tsai, Chun-Liang Kuo, I-Hua Liu

Taiwanese Journal of Orthodontics

Facial asymmetry is common in humans. Significant facial asymmetry causes both functional as well as esthetic problems. The etiologies of facial asymmetry include congenital disorders, acquired diseases, and traumatic and developmental deformities. The causes of many cases of developmental facial asymmetry are indistinct. The principle of facial asymmetry management would be correcting the underlying disorder. Orthognathic surgery is the first and better choice if face correction is the primary consideration. Camouflage orthodontic treatment was a non-invasive option for mild to moderate severity of asymmetry. We present a case with mandibular lateral displacement, transverse deficiency and facial asymmetry in a 19-year-old …

Definitive Surgical-Orthodontic Treatment To Correct The Problems Subsequent To Early Skeletal Class Iii Camouflage, Siripatra Patchanee, Ellen Wen-Ching Ko, Cheng-Hui Lin

Taiwanese Journal of Orthodontics

This case report describes the treatment of a 21-year-old female patient who was disappointed with the outcome of a previous orthodontic treatment and complained about her chin prominent. She had skeletal Class III malocclusion with concave facial profile, hypodivergent facial pattern with deep overbite. The previous Class III camouflage orthodontic treatment was done by teeth 34, 44 extraction since she was 12 years old. With the concept of surgery-first approach, the surgical treatment plan included LeFort I osteotomy clockwise rotation of maxilla and bilateral sagittal split ramus osteotomy backward rotation of mandible with genioplasty and angle reduction in order to …

Orthodontic Treatment Of Adult Skeletal Class Ii With Idiopathic Condylar Resorption History And Severe Anterior Open Bite Without Using Temporary Anchorage Device – A Case Report, Chng-Yung Yap, Chun-Liang Kuo

Taiwanese Journal of Orthodontics

The aim was to present the treatment of an adult patient with idiopathic condylar resorption (ICR) who exhibited good adaptation of condyles after orthodontic treatment and to discuss management of anterior open bite when it is related with TMJ problems. A case of 47 y/o female with skeletal Class II, anterior open bite and ICR history under bite-plate therapy and regular follow up. Intraoral examination noted premature contact and occlusal interference over bilateral posterior teeth. Our treatment plan is orthodontic camouflage treatment to correct anterior open bite and remove all 3rd molars and hopeless UL 2nd molar. An implant was …

Investigation Of Medical Disputes Involving Dentists Performing Orthodontic Treatments In Taiwan, Chih-Ling Lin, Sheng-Pin Hsu, Yu-Kun Chih

Taiwanese Journal of Orthodontics

Introduction: Medical disputes have received increasing attention in recent years. Under the assistance of the academic and medical affairs committees of the Taiwan Association of Orthodontists, this study explored medical disputes among orthodontists performing orthodontic treatments in Taiwan in 2016. Methods: This study adopted a questionnaire survey, which was divided into three sections, namely the surveyed orthodontists’ demographic information, medical services, and subjective views on orthodontic-related medical disputes. The results were compared with those from a study conducted in 2010. Subsequently, topics related to clear aligner therapy and orthognathic surgery were examined. Results: The results indicated that 32.3% of the …

Is Early Treatment With Functional Appliances Worth The Effort? A Discussion Of The Pros And Cons Of Early Interceptive Treatment, Ib Leth Nielsen

Taiwanese Journal of Orthodontics

Early treatment of Class II, Div. 1 malocclusion is a much debated approach and some evidence based studies using a single appliance concluded that this approach was often not worthwhile. This article will discuss the pros and cons of early treatment with functional appliances and present guidelines for early treatment. The role of facial growth and dentoalveolar development, and growth intensity will be discussed as they relate to treatment outcome. A retention protocol for early treatment with functional appliances will be suggested.