Orthodontics and Orthodontology Commons^™

Medicaid In The Orthodontic Community: Provider Trends And Perceptions, Miranda L. Fabrega

Graduate Theses, Dissertations, and Problem Reports

Background and Objectives: Medicaid is a federal and state insurance program aimed at helping economically disadvantaged individuals and families with gaining access to health care. Lack of provider participation in the Medicaid program leaves many Medicaid-eligible individuals with the inability to obtain certain medical services, such as orthodontic care. The objective of this study was to use an electronic survey to better understand the beliefs and behaviors of orthodontists in regard to participation in the Medicaid program, and to determine if differences exist between Medicaid providers and non-Medicaid providers. Experimental Design and Methods: Survey: Requests to participate in an electronic …

Cbct Use In Orthodontic Residency Programs In Usa, Su Min Han

Graduate Theses, Dissertations, and Problem Reports

Background and Objectives: Cone beam computed tomography (CBCT) scans in dentistry have been up and coming forms of x-ray technology that allows cross-sectional images to form a comprehensive 3-dimensional representation of the mouth. While the typical use for CBCT imaging is reported to be for implant dentistry, there are many contexts in which it is indicated in orthodontics. There are various schools of thought regarding when CBCT is indicated for specific diagnosis of problems or general use in the collection of initial, progress and post-treatment orthodontic records. There are programs that follow the Radiology guidelines for taking CBCT scans10 and …

Passive Self-Ligating Brackets Vs. Conventional Brackets: Is There A Difference In The Transverse Dimension? A Systematic Review And Meta-Analysis, Justin Scott Tenbrook

Graduate Theses, Dissertations, and Problem Reports

Background and Objectives:

Self-ligating brackets have risen in popularity in clinical orthodontics, but many claims made by their manufacturers have been made without substantial evidence. Any differences among the bracket types are very small when consulting new peer reviewed literature testing their differences. Nevertheless, self-ligating brackets are still purported to be able to increase the dental transverse dimension more effectively than conventional brackets. In 2018, Yang et al. performed a systematic review on the transversal changes, space closure, and efficiency of conventional and self-ligating appliances. Since then, there were several clinical trials published in the literature comparing the mandibular arch …

Effect Of Pad Design And Bracket Manufacturing Method On Bracket Bond Strength, Dustin Osborne

Graduate Theses, Dissertations, and Problem Reports

Objective: The objective is to determine if there is a significant difference in shear bond strength and debonding characteristics between one-piece metal brackets made by metal injection molding (MIM) and multi-piece metal brackets made by machining then soldering/brazing with differing pad designs. Methods: A total of thirteen metal orthodontic brackets manufactured by 8 different companies were divided into two groups: one-piece MIM and multi-piece brackets. Each group consisted of 10 brackets for a total of 130 brackets. Brackets were bonded to stainless steel tubes with a universal bonding technique. Samples were tested on the universal Instron testing machine to measure …

An In Vitro Comparison Of Shear Bond Strength Between Two Orthodontic Light-Curable Adhesive Pastes, Stephanie Becker

Graduate Theses, Dissertations, and Problem Reports

Background and Objectives: A relatively new light-cure orthodontic adhesive BracePaste^® can fluoresce under UV light to assist in cleaning up excess flash after bonding. Complete removal of excess resins around the bonded brackets may minimize excessive loss of enamel upon debonding. The objective of this study was to determine the shear bond strength of BracePaste compared to that of the conventional “Transbond XT” adhesive. Additionally, enamel and bracket interfaces were examined to determine the location of bond failure and the tooth surfaces were visually examined to assess severity of enamel marks and the presence of remaining adhesives on the …

Evaluation Of Dental And Skeletal Changes With Sequential Distalization Of Maxillary Molars Using Clear Aligners: A Preliminary Study, Minh Phi Nguyen

Graduate Theses, Dissertations, and Problem Reports

Introduction: Class II malocclusions can be treated with appliances such as the pendulum appliance or distal jets to distalize maxillary molars to achieve a Class I molar relationships. It is not clear in the literature whether these clear aligners can distalize maxillary molars, dental tipping, or translation. The objective was to evaluate the dental and skeletal changes in three planes spaces using CBCT scans and compare the treatment changes with a control group of subjects. Methods: Eight Class II division 1 malocclusions patients treated with maxillary molar distalization using clear aligners. Twelve molars were evaluated for tooth movement in three …

Comparison Of Skeletal And Dentoalveolar Changes Between Two Bone-Borne Maxillary Expanders, Mohamad Sarraj

Graduate Theses, Dissertations, and Problem Reports

Introduction: Bone-borne maxillary expander (BBME) are designed to provide additional anchorage to widen the maxillary arch for patients who exhibit maxillary transverse deficiency. One form of BBME is the hybrid BBME which uses mini-implants (bone-borne) and posterior teeth (tooth-borne) as anchorage for maxillary expansion. The other form of BBME is absolute BBME which only uses mini-implants as anchorage. It is not clear in the literature if there is a difference in skeletal and dental changes with these two types of expanders. The objective of this study was to compare the skeletal, dentoalveolar, and periodontal changes between the hybrid and the …

Retrospective Evaluation Of The Changes In The Nasal And Pharyngeal Airway Volume After Miniscrew Assisted Rapid Palatal Expansion (Marpe) Appliance, Joanna Song

Graduate Theses, Dissertations, and Problem Reports

Background and Objectives: A transverse deficiency of the maxilla is a pervasive skeletal problem that can affect almost a quarter of the primary dentition population. The interesting relationship between rapid maxillary expansion (RME) and its effects on the surrounding airway is not well described in the literature. For today’s contemporary orthodontist, there are a variety of rapid palatal expanders (RPE) and expansion protocols to prescribe for patient treatment. Of late, the miniscrew-assisted RPE (MARPE) has been receiving attention by clinicians because of its increased orthopedic effects when compared to conventional RPE while avoiding the surgical procedure needed with SARPE. …

Clear Aligner Therapy Vs. Traditional Brackets On Smile Arc, Sarah Elizabeth Larue

Graduate Theses, Dissertations, and Problem Reports

Background and Objectives: More so than ever, the public is becoming exceedingly aware of esthetics, and will evaluate their treatment outcome based upon the improvement to their smile and overall enhancement of their facial appearance. Smile arc is considered to be a key component of facial esthetics. Literature has demonstrated that orthodontic treatment mechanics utilizing traditional brackets and wires can cause flattening of the smile arc and that smiles with flatter arcs are judged to be less attractive. The aim of this study was to determine whether clear aligner therapy can help to preserve or improve the smile arc …

Early Class Iii Treatment Decision-Making, Peter Ngan, David Musich

Faculty & Staff Scholarship

Clinicians make decisions for their patients everyday. Ryan Hamilton, in his course guidebook, How You Decide: The Science of Human Decision Making, summarized the current research on the 4 R's of decision-making that matter: reference points, reasons, resources, and replacement. The authors will apply this principle in the decision- making necessary for the growing Class III patients. First, the decision on whether to treat or not to treat Class III patients in the mixed dentition rely on a thorough diagnosis and objectives for early treatment. For example, elimination of a functional shift of the mandible may be a good …

Judged Facial Attractiveness Of Extraction And Non-Extraction Orthodontic Treatment In Repose And Smiling, Nicolette R. Chahin

Graduate Theses, Dissertations, and Problem Reports

Background and Objectives: More so than ever, the public is becoming exceedingly aware of esthetics, and will evaluate their treatment outcome based upon the improvement to their smile and overall enhancement of their facial appearance. There exists a debate in orthodontics, as to whether or not extractions harm the profile. The aim of this study was to determine if facial attractiveness is harmed in subjects having completed orthodontic treatment involving the extraction of four premolars both in repose and smiling when viewed in lateral profile. Another objective is to identify any impact upper incisor retraction has on facial attractiveness. …

Impact On The Pharyngeal Airway Space After Maxillomandibular Advancement Procedure For Obstructive Sleep Apnea Patients, Ghaddy Alsaty

Graduate Theses, Dissertations, and Problem Reports

Background and Objectives: Obstructive sleep apnea (OSA) is a sleep-related breathing disorder, characterized by disrupted snoring and repetitive upper airway obstructions. Continuous positive airway pressure (CPAP) is considered the therapeutic mainstay for OSA patients. However, CPAP therapy has compliance limitations. An alternative treatment options is maxillomandibular advancement (MMA) surgical procedure. Genial tubercle advancement (GTA) is often performed concomitant with MMA for esthetic purposes. Cone-beam computed tomography (CBCT) provides the ability to visualize the upper airway and perform three-dimensional (3D) reconstructions. The purpose of this study is to evaluate the impact of MMA procedure with or without GTA on oropharyngeal …

Effect Of Shear Bond Strength With Novel Apc™ Flash-Free Brackets And Different Bonding Protocol: An In Vitro Study, Carl Bernstein

Graduate Theses, Dissertations, and Problem Reports

Background and Objectives: In today’s time, there is an increasingly crowded field of competition vying over a small subset of the population. Now, more than ever it is imperative to compete with efficiency and esthetics. Each step for orthodontic bonding procedures increases the chance for error to occur. However, orthodontic bracket, etchant, sealant, and adhesive material has the ability to improve bond strength and final outcome for the patient and provider. The aim of this study was to determine effective bonding protocols for Advanced Clarity APC™ Flash-Free Brackets and to determine if adhesive remains on enamel or orthodontic bracket after …

Skeletal, Dentoalveolar, And Periodontal Changes Of Skeletally Matured Patients With Maxillary Deficiency Treated With Microimplant‐Assisted Rapid Palatal Expansion Appliances: A Pilot Study, Peter Ngan, Uyen Kelly Nguyen, Tung Nguyen, Timothy Tremont, Chris Martin

Faculty & Staff Scholarship

Introduction: Microimplant‐assisted rapid palatal expansion (MARPE) has recently been offered to adult patients for correcting maxillary transverse deficiency. However, there is limited information in the literature on the success of this appliance and its skeletal and dental effects on skeletally matured patients. The purpose of this study was to investigate the immediate skeletal, dentoalveolar, and periodontal response to MARPE appliance using cone‐beam computed tomography in a skeletally matured patient as assessed by the cervical vertebral maturation method. Materials and Methods: Eight consecutively treated patients (2 females, 6 males; mean age of 21.9 ± 1.5 years) treated with a maxillary skeletal …