Operations Research, Systems Engineering and Industrial Engineering Commons^™

System Dynamics And Multi-Agent Simulation Research On Ground Combatpersonnel Attrition, Xiaoxiong Hao, Jianwei Ma, Zhaohui Huang, Yungui Wang

Journal of System Simulation

Abstract: In order to study the law of the combat personnel attrition and guide the military medical logistics support, the relevant researches are systematically sorted out and the key questions are clarified. Based on Lanchester equation theory, a system dynamics model of the combat attrition process is established, and the consistency between the model conclusion and the historical experience is analyzed. A multi-agent model of the combat attrition process is also constructed, and the advantages and disadvantages of the two models are analyzed. The main conclusion is that the theoretical model’s outcomes of combat attrition are relatively consistent with the …

Modeling Method Of Emergency Response Based On Internal And External Areas Of Disaster Zone, Liang Wei, Yanyan Huang, Jianyu Wang

Journal of System Simulation

Abstract: The insufficient ability of the rescuers and the insufficient self-rescue ability of the victims are the two main reasons of the low efficiency in some conventional event emergency. An emergency response model which combines the rescue ability and the self-rescue ability is presented. The division of the internal and the external system in the disaster field is defined, the basic structure of the model and the emergency response process characteristics are described. MAS (multi-agent system) is used to describe the law of the emergency behavior. The synergistic rescue effect is simulated through an imaginary case. The results show that …

Time Domain Vertical Dynamics Model Of Electric Vehicle Considering Electric Motor Vibration, Guoying Tian, Pengyi Deng, Shulei Sun, Yiqiang Peng, Haiying Lu

Journal of System Simulation

Abstract: On the basis of considering the electric motor vibration, a time domain vertical dynamics model of the electric vehicle with 11 DOF is built, and the road roughness input model and the numerical method are given. Aiming at an electric passenger vehicle, the basic characteristics of the typical vehicle dynamics responses under the condition of the impulse and random road roughness inputs are calculated, the influence of the different mount stiffness, damping and motor mass on the motor and the vehicle vibration is analyzed under the condition of the impulse input. The results show that the proposed model is …

Trajectory Planning Of Wheeled Mobile Robot Based On Model Predictive Control, You Bo, Mingrui Wang, Li Zhi, Ding Liang

Journal of System Simulation

Abstract: Aiming at the underactuation of the Wheeled Mobile Robot (WMR) and considering the various limitations and constraints during the actual operation, a trajectory planning method based on the Model Predictive Control (MPC) is proposed.This method can deal with the kinematics constraints, physical constraints and obstacle avoidance constraints unifiedly and effectively. It can generate the feasible trajectories that conform to the characteristics of the car body model and satisfy the various constraints. It fully guarantees the feasibility, safety and efficiency of the autonomous driving of wheeled mobile robots. The simulation results fully verify the effectiveness of the proposed method.

Fault Diagnosis Method Of Vehicle Power Supply Based On Deep Learning And Sequential Test, Li Wei, Bingxiang Zhou, Dongnian Jiang

Journal of System Simulation

Abstract: Focus on the health maintenance of vehicle power supply, a fault diagnosis method of vehicle power supply is proposed, which is based on the long and short time memory LSTM(Long Short Time Memory) network and the sequential probability ratio test SPRT(Sequential Probability Ratio Test). Based on the LSTM network, the multivariate time series model of vehicle power supply is established, and the SPRT method is used to perform the adaptive multi-sample fault diagnosis. The experiment on the vehicle power supply simulation system shows that the LSTM diagnosis model has stronger learning and mapping capabilities, and the fault diagnosis method …

Research On Flight Ground Service Time Prediction Based On Deep Neural Network, Zhiwei Xing, Li Biao, Zhu Hui, Luo Qian

Journal of System Simulation

Abstract: Flight ground service time prediction is one of the key issues in improving the airport operational efficiency and decision making capacity. Taking into account the complexity, particularity and uncertainty of the service process, a Gaussian probability model of flight ground service resource in place time is established, a flight ground service time prediction model based on the deep neural network is proposed. According to the regular changes of operational data, the model parameters are adjusted to reducet the generalization error caused by other factors. The research results show that the average absolute error of time prediction under single …

Unmanned Crane Dispatching System Based On Grid Method In Steel Works, Weigang Li, Wang Xiao, Yuntao Zhao, Zixiang Li

Journal of System Simulation

Abstract: A grid method is used to model a storeroom to solve the problem of the unmanned crane automatic scheduling of the iron and steel industry. An improved A* algorithm is proposed to make the path planning. Different moving costs are assigned for the different route sections in storeroom and the different moving modes of cranes, and the path with the minimum total cost which can avoid the slab obstacles alongside is calculated by the algorithm. A set of intelligent dispatching rules are designed to solve the inefficiency of the manual operation, which can effectively deal with the problems about …

Vehicle Coordination Strategy For Semi-Active Suspension Vehicles, Quanmin Guo, Haowen Zhang, Wang Yan

Journal of System Simulation

Abstract: In order to realize the coordinated control of the vertical, pitch and roll vibration of vehicle, a coordinated control strategy of vehicle semi-active suspension is proposed. In the strategy, the fuzzy PID controllers estimate three adjustment forces according to the vibration state in vertical, pitch and roll directions. Through the designed force coordinator with the control parameters of the front and back axes and the steering control strategy, the expected adjustment forces are coordinated to the four magnetorheological dampers to output the adjustable damping forces and realize the coordinated control of the vehicle vibration in three directions. The experimental …

Simplification And Compression Service Construction Of 3d Model For Complex Products, Junjie Xue, Guoqiang Shi, Junhua Zhou, Huiyang Qu, Tao Luan, Ruiying Pu

Journal of System Simulation

Abstract: A simplification and compression (S&C) service construction method of the 3D model for the complex products is proposed. An improved method of the model data export and spatial index generation is adopted to preserve the assembly tree and label information of the model in the process of model S&C. An adaptive mesh simplification algorithm based on the mesh density is designed and implemented, and the meshes can be simplified adaptively on condition of satisfying the requirement of error for the geometric model. And a model data compression algorithm with the high compression ratio and efficiency is adopted to reduce …

3d Tree Model Matching Based On Tree Shape Space, Liang Shuang, Zuoteng Zhu, Jinyuan Jia

Journal of System Simulation

Abstract: The retrieval of the 3D tree models cannot get the higher accuracy, retrieving efficiency and descripting match. In order to solve the problems, a three-dimensional tree model matching method based on tree space is proposed. By constructing the tree space of the three-dimensional tree model dataset, the method computes the difference between the Euclidean distance and the geodesic distance in the tree space by means of spindle matching, contour matching, and branch matching, and gradually matches the corresponding model. The matching implementation results are displayed in the general model dataset and the self-designed model dataset respectively. …

Evaluating The Effectiveness Of Continuing Education At Emergency Medical Services, Tasmia Mustaquim

LSU Master's Theses

Emergency Medical Services (EMS) require staff to recertify periodically, which involves a significant amount of continuing education. Great effort is given to designing and delivering a continuing education program, but it is also important to know if the training had all of the intended impacts. Nationally, there is no evidence-based system in place for training evaluation at EMS. This research proposes a framework being used at East Baton Rouge Parish Emergency Medical Services (EBRP-EMS) to evaluate a course, generate reports to indicate the performance of staff, and identify areas of improvement.

The Kirkpatrick Model, which is a 4-level evaluation, is …

An Ergonomic Analysis Of Ingredient Batching In A Dairy Bottling Facility, Hayden Johnson, Laila Elhidmi

Scholars Week

Dairy production facilities rely on batching operators to unload palletized ingredients and mix them to meet ingredient specifications. Batching operators in the dairy industry are frequently required to work for prolonged periods of time in awkward postures while performing repetitive and forceful exertions. Work-related musculoskeletal disorders (WMSDs) typically impact workers’ performance and increase job discomfort. Such incidents are generally costly to employers as they often result in workers compensation claims and increased insurance premiums. The purpose of this study was to characterize the ergonomic risk factors associated with commonly performed batching processes and evaluate possible solutions to reduce exposure to …

Subsurface Analytics: Contribution Of Artificial Intelligence And Machine Learning To Reservoir Engineering, Reservoir Modeling, And Reservoir Management, Shahab D. Mohaghegh

Faculty & Staff Scholarship

Subsurface Analytics is a new technology that changes the way reservoir simulation and modeling is performed. Instead of starting with the construction of mathematical equations to model the physics of the fluid flow through porous media and then modification of the geological models in order to achieve history match, Subsurface Analytics that is a completely AI-based reservoir simulation and modeling technology takes a completely different approach. In AI-based reservoir modeling, field measurements form the foundation of the reservoir model. Using data-driven, pattern recognition technologies; the physics of the fluid flow through porous media is modeled through discovering the best, most …

Cardiovascular Surgery Practice Remodel: Increasing Job Satisfaction And Reducing Turnover Rates Of Advanced Practice Providers, Christian Brooks

Doctor of Nursing Practice Scholarly Project

Cardiovascular Surgery Practice Remodel: Increasing Job Satisfaction and Reducing Turnover Rates of Advanced Practice Providers

Background: The CVS practice in a Midwestern state had a shift in morale and job satisfaction in their advanced practice providers (APPs). This shift lead to the high turnover rate of 35% in 2018. In an effort to bring a halt to the high turnover rate, and to continue the excellent patient care for which the hospital is known, hospital administration became involved and set up a committee to guide the development of a new CVS APP practice model. The goal was to develop …

Bootstrap Statistics, Greg Hutto

Operations Management Presentations

Bootstrap Statistics is an intuitive approach to learning statistics because of its simplicity, freedom from assumptions and wide applicability. This webinar will refresh your knowledge of statistics and give you intuitive tools to apply concepts. We will deduce robust methods to build point estimates, interval estimates and assert differences or similarities. If time permits, we’ll even evaluate statistical power! And we’ll do it all with only one major assumption and no curtain of math or normal theory clouding our procedures. The webinar will be accompanied by three papers, tool references, slides and a sample data set with solutions.

Hybrid Vehicle-Drone Routing Problem For Pick-Up And Delivery Services Mathematical Formulation And Solution Methodology, Aline Karak

Civil and Environmental Engineering Theses and Dissertations

The fast growth of online retail and associated increasing demand for same-day delivery have pushed online retail and delivery companies to develop new paradigms to provide faster, cheaper, and greener delivery services. Considering drones’ recent technological advancements over the past decade, they are increasingly ready to replace conventional truck-based delivery services, especially for the last mile of the trip. Drones have significantly improved in terms of their travel ranges, load-carrying capacity, positioning accuracy, durability, and battery charging rates. Substituting delivery vehicles with drones could result in $50M of annual cost savings for major U.S. service providers.

The first objective of …

Application Of Theory Of Constraints (Toc) In Managing Project Information Constraints, Ferdinand Z. Prantl

EMSE Doctoral Projects

The scope of this doctoral project is the non-traditional application of Drum-Buffer-Rope (DBR) from the area of Theory of Constraints (ToC) in mitigating disruption in distribution facilities during phased upgrades caused by information constraint. The relevance of this project is that industrial equipment upgrades pose a significant risk of disrupting the operation of automated distribution facilities. It is partly due to a very high expected availability rate, as well as tight coupling with other upstream and downstream elements of the larger supply chain network. As a consequence of disruption in this scenario, losses incurred not only within the facility being …

Investigation Of Manual Material Handling On Musculoskeletal Disorder At Computer Numerical Control Workstation, Abdullah Nor Suliani

Student Works (2020-2029)

Manual Material Handling (MMH) tasks have been recognized among the major source of work-related musculoskeletal disorder (WMSD) in automotive industry and they are commonly practiced at Computer Numerical Control (CNC) workstation. At this workstation, workers act as a material transfer device in the process of loading and unloading products from pallets to machines. The physical interaction of workers to machine is not self-chosen and workers are forced to follow the pace of running CNC machine. The worst situation happens when workers are required to operate more than one machine concurrently. The mismatch interaction between workers and machine exposes workers to …

Applications Of Image Processing Techniques And Spatial Data Analytics For Pressure Mapping Analysis, Joan Yamil Martinez

Dissertations

The technological advancements in sensors, monitoring systems, and tracking devices are changing how we study our environment; big data sets are becoming more and more prevalent due to the increase of information gathered with ease. One system benefiting from these technological improvements is pressure mapping technology, an easy-to-use and cost-effective solution for assessing contact pressure distributions.

Pressure mapping systems generally produce data sets of very large volume, especially when used for continuous tracking and monitoring, and are widely used for research in fields of ergonomics, sports, industries, and health disciplines. Pressure mapping systems are particularly important in the study of …

Applying Control Abstraction To The Design Of Human–Agent Teams, Clifford D. Johnson, Michael E. Miller, Christina F. Rusnock, David R. Jacques

Faculty Publications

Levels of Automation (LOA) provide a method for describing authority granted to automated system elements to make individual decisions. However, these levels are technology-centric and provide little insight into overall system operation. The current research discusses an alternate classification scheme, referred to as the Level of Human Control Abstraction (LHCA). LHCA is an operator-centric framework that classifies a system’s state based on the required operator inputs. The framework consists of five levels, each requiring less granularity of human control: Direct, Augmented, Parametric, Goal-Oriented, and Mission-Capable. An analysis was conducted of several existing systems. This analysis illustrates the presence of each …

Incorporating A Reverse Logistics Scheme In A Vehicle Routing Problem With Cross-Docking Network: A Modelling Approach, Audrey Tedja Widjaja, Aldy Gunawan, Panca Jodiawan, Vincent F. Yu

Research Collection School Of Computing and Information Systems

Reverse logistics has been implemented by various companies because of its ability to gain more profit and maintain the competitiveness of the company. However, extensive studies on the vehicle routing problem with cross-docking (VRPCD) only considered the forward flow instead of the reverse flow. Motivated by the ability of a VRPCD network to minimize the distribution cost in the forward flow, this research incorporates the reverse logistics scheme in a VRPCD network, namely the VRP with reverse cross-docking (VRP-RCD). We propose a VRP-RCD mathematical model for a four-level supply chain network that involves suppliers, cross-dock, customers, and outlets. The main …

Validation Risk Across Hierarchical Models, John B. Young

Computational Modeling & Simulation Engineering Theses & Dissertations

Modeling and simulation are applied in a great many methods across a variety of topics. Model developers and users alike have a professional duty to understand the complexities of the tools and methods they are used. Oftentimes, models that have been independently constructed and executed are used to inform one another for an analytic purpose and the compatibility of the models is not always addressed. In the literature, great attention has been paid to model validation. When using models constructively with one another, analysts must understand the bounds of model validity and ensure that the combination of models does not …

Engineering Management Competencies: A Framework For Present And Future Engineering Environments, Christopher Vaughn Barrett

Engineering Management & Systems Engineering Theses & Dissertations

Managing and directing engineering requires engineering management competencies. Although perspectives may differ concerning competencies for engineering management, identifying competencies can direct and improve management. The purpose of this research is to develop a framework of competencies for engineering managers using an inductive research design. Development of this engineering management competency framework involves an exploration of three primary research questions. The first question is ‘What are the current competencies for engineering managers?’ The response to this question provides a basis for the current state of competencies for engineering managers. The second research question, ‘What are future engineering management competencies based on …

Dod Mission Engineering And Integration Explorative-Exploitative Architecture For Technology Innovation, Jose L. Bricio-Neto

Engineering Management & Systems Engineering Theses & Dissertations

The ability of U.S. Department of Defense to achieve timely innovation in support of U.S. National Defense and Military Strategies continues to increase in significance. The growing challenges in U.S. Department of Defense (DoD) technological innovation in a context of global security and rapid pace of global competitiveness continue to reveal many shortcomings in current weapon systems development and acquisition practice. As the pace of technological innovation is accelerating, the DoD faces the challenge that the same disruptive technological advances are also being made available to or developed by its adversaries. Based on literature review, no innovation system theory exists …

Effects Of Transparency And Haze On Trust And Performance During A Full Motion Video Analysis Task, Sarah C. Leibner

Psychology Theses & Dissertations

Automation is pervasive across all task domains, but its adoption poses unique challenges within the intelligence, surveillance, and reconnaissance (ISR) domain. When users are unable to establish optimal levels of trust in the automation, task accuracy, speed, and automation usage suffer (Chung & Wark, 2016). Degraded visual environments (DVEs) are a particular problem in ISR; however, their specific effects on trust and task performance are still open to investigation (Narayanaswami, Gandhe, & Mehra, 2010). Research suggests that transparency of automation is necessary for users to accurately calibrate trust levels (Lyons et al., 2017). Chen et al. (2014) proposed three levels …

Game Theory Approaches For Transportation Problems, Mahdi Takalloo

USF Tampa Graduate Theses and Dissertations

This dissertation considers three separate game theory problems in transportation. In the first problem, a combinatorial auction market has been proposed for fractional ownership of autonomous vehicles. The proposed combinatorial auction has two unique features. First, the items are continuous time slots defined by bidders and second, the spatial information of bidders has been incorporated so that sharing becomes a viable plan. A conflict-based formulation of the winner determination problem has been proposed, for which an effective solution approach based on a heuristic and a maximal-clique based relaxation has been presented. The second part of the dissertation examines a pessimistic …

Lightning Prediction For Space Launch Using Machine Learning Based Off Of Electric Field Mills And Lightning Detection And Ranging Data, Anson Cheng

Theses and Dissertations

Kennedy Space Center and Cape Canaveral Air Station, FL, where the Air Force conducts space launches, are in an area of frequent lightning strikes, which is main obstacle in meeting launch goals. The 45th Weather Squadron (45th WS) ensures that any weather safety requirements are met during pre-launch and actual space launch. Using only summer months from three years’ worth of lightning detection and ranging (LDAR) and electric field mill (EFM) data from KSC, several feedforward neural networks are constructed. Separate models are built for each EFM and trained by adjusting parameters to forecast lightning 30 minutes out in the …

A Metamodel Recommendation System Using Meta-Learning, Megan K. Woods

Theses and Dissertations

The importance and value of statistical predictions increase as data grows in availability and quantity. Metamodels, or surrogate models, provide the ability to rapidly approximate and predict information. However, selection of the appropriate metamodel for a given dataset is often arduous, and the choice of the wrong metamodel could lead to considerably inaccurate results. This research proposes and tests the framework for a metamodel recommendation system. The implementation allows for virtually any dataset and preprocesses data, calculates meta-features, evaluates the performance of various metamodels, and learns how the data behaves via meta-learning, thus preparing and bettering itself for future recommendations. …

Database Analysis To Improve U.S. Transportation Command Forecasting Processes, Maxwell C. Thompson

Theses and Dissertations

The United States Transportation Command (USTRANSCOM) facilitates air, land, and sea transportation for the DOD. On a periodic basis, a myriad of different agencies within USTRANSCOM project future workload to facilitate resource planning, budgeting, and reimbursable rate identification. Within USTRANSCOM, there are a variety of databases and metrics utilized for workload forecasts; neither a standard nor a preferred technique is prescribed. Currently, USTRANSCOM faces challenges in producing accurate workload forecasts [1]. These challenges can lead to unreliable budget requests and, ultimately, hinder the effectiveness and efficiency of USTRANSCOM [1]. For the purpose of routine aircraft movements of cargo and personnel, …

Ground Weather Radar Signal Characterization Through Application Of Convolutional Neural Networks, Stephen M. Lee

Theses and Dissertations

The 45th Weather Squadron supports the space launch efforts out of the Kennedy Space Center and Cape Canaveral Air Force Station for the Department of Defense, NASA, and commercial customers through weather assessments. Their assessment of the Lightning Launch Commit Criteria (LLCC) for avoidance of natural and rocket triggered lightning to launch vehicles is critical in approving space shuttle and rocket launches. The LLCC includes standards for cloud formations, which requires proper cloud identification and characterization methods. Accurate reflectivity measurements for ground weather radar are important to meet the LLCC for rocket triggered lightning. Current linear interpolation methods for ground …