Operations Research, Systems Engineering and Industrial Engineering Commons^™

Re-Evaluating Coverage Metrics For Wireless Sensor Network Border Security Applications, Kevin Haney

Industrial Engineering Undergraduate Honors Theses

Wireless sensor networks are an emerging technology used to monitor an environment over time. One specific application of the wireless sensor network is the border security application. Researchers have adapted coverage metrics from general wireless sensor network literature to fit the border security application. While some of the adapted metrics count the number of sensors detecting a potential target, others measure the distance between a potential target and its nearest sensor. No existing metric accounts for both of these factors. To take advantage of this gap and to attempt to increase the accuracy to which coverage is measured in this …

Improvement Of Geometric Quality Inspection And Process Efficiency In Additive Manufacturing, Yu Jin

Graduate Theses and Dissertations

Additive manufacturing (AM) has been known for its ability of producing complex geometries in flexible production environments. In recent decades, it has attracted increasing attention and interest of different industrial sectors. However, there are still some technical challenges hindering the wide application of AM. One major barrier is the limited dimensional accuracy of AM produced parts, especially for industrial sectors such as aerospace and biomedical engineering, where high geometric accuracy is required. Nevertheless, traditional quality inspection techniques might not perform well due to the complexity and flexibility of AM fabricated parts. Another issue, which is brought up from the growing …

Gridhub: A Grid-Based, High-Density Material Handling System., Gang Hao

Electronic Theses and Dissertations

In the past twenty years, the share of e-commerce has increased (FRED, 2019). Since more and more activities, such as picking and sorting customers’ orders, are done in warehouses, high efficiency warehouses are in demand. Furthermore, the efficiency of warehouses is related to customer satisfaction (Colla and Lapoule, 2012). Storage systems are key components in warehouses, which are related to the efficiency of warehouse operations. In this dissertation, we address an automatic puzzle-based storage system under decentralized control. We call this system GridHub. GridHub meets standards of Industry 4.0 (Lasi et al., 2014), and it features high throughput with parallel …

A Machine Learning Approach For Allocating Route Cost To Customers For Transportation And Logistics Services., Alison Davis

Electronic Theses and Dissertations

Advancements in big data enabled management practices inspire logistics companies to study deeper into their transportation operations with a data driven approach. One such question asks: How can a logistics firm identify high-cost customers in their service network? In the presence of rich data on routes involving many customers, this thesis develops a framework to allocate a route cost among customers that the route serves, where each route is associated with multiple route features related to the transportation cost. Cost is allocated using the proportional allocation approach in combination with the random forest method in machine learning. First, this framework …

Effects Of Design Autonomy On The Flow Experience, Antonio F Coriano

Electronic Theses and Dissertations

Most modern workplace settings are laden with operating procedures aimed at standardizing action in the name of efficiency. The cost of this standardization is the autonomy of the operator. Mihaly Csikszentmihalyi stated the problem concisely in his 1975 work Beyond Boredom and Anxiety “… [M]ost of the institutions that take up our time…are organized around the assumption that serious work is grim and unpleasant. Because of this assumption, most of our time is spent doing unpleasant things”. An experiment was created to study and better understand how to redress this harmful situation. Sixteen subjects were given a SolidWorks computer-aided design …

Determining The Efficacy Of Additive Manufacturing For The Aerospace Spare Parts Supply Chain, Kyle O'Brien

Electronic Theses and Dissertations

This thesis investigates how additive manufacturing (AM) based on-demand part production can supplement or replace the traditional production and inventory in typical aerospace’s spare parts supply chain systems. This study focuses on the operational characteristics of AM and its impacts on the overall logistics of plant-level operations. To capture the microscopic operational aspects of the AM production, a discrete-event simulation based approach was adopted, with key AM operation resources (e.g. AM system, operator) and attributes (e.g. AM manufacturing speed, individual part characteristics and demands) accounted for in the modeling process. In addition, a benchmark warehouse inventory model was also established …

Locating Emergency Shelters While Incorporating Spatial Factors, Justin Taylor

Graduate Theses and Dissertations

In the immediate response phase of a natural disaster, local governments and nonprofit agencies often establish shelters for affected populations. Decisions regarding at which locations to open shelters are made ad hoc based on available building inventory, and may result in high travel impedance to reach shelters and congestion. This thesis presents a shelter location optimization model based on the two-step floating catchment area (2SFCA) method. The 2SFCA method creates a shelter accessibility score for each areal unit (e.g., census block group) which represents the ability for persons in the unit to access shelter capacity with low travel impedance, relative …

Joint Location And Inventory Models And Algorithms For Deployment Of Hybrid Electric Vehicle Charging Stations., Jie Zhang

Electronic Theses and Dissertations

This thesis describes a study of a novel concept of hybrid electric vehicle charging stations in which two types of services are offered: battery swapping and fast level-3 DC charging. The battery swapping and fast-charging service are modeled by using the M/G/s/s model and the M/G/s/$\infty$ model, respectively. In particular, we focus on the operations of joint battery swapping and fast charging services, develop four joint locations and inventory models: two for the deployment of battery swapping service, two for the deployment of hybrid electric vehicle charging service. The first model for each deployment system considers a service-level constraint for …

Optimization And Simulation Models To Improve Access To Organ Transplantation In The United States., Fatemeh Karami

Electronic Theses and Dissertations

Organ allocation in the U.S. is administrated by the United Network of Organ Sharing (UNOS). UNOS’s mission is to ensure fair and equitable allocation of organs as stated in the Code of Federal Regulations, which reads "neither place of residence nor place of listing shall be a major determinant of access to transplant". Despite the regulations, there has been endless controversy surrounding the disparity in access to organ transplants. In this context, the primary research goal in this dissertation was to reduce geographic disparity in access to transplants in the U.S., with a focus on heart and kidney transplants. To …

Mathematical Modeling Approaches In Sustainable Food Supply Chains, Amin Gharehyakheh

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Access to high quality and safe food is vital for sustainable development in societies. Perishable foods lose a major portion of their quality after harvesting until the consumption point due to poor storage and distribution conditions. Thus, improvements in food supply chain operations are very critical in the sustainable development of society and the industry. The first part of this dissertation seeks to find a cost-effective and reliable tool to monitor the quality loss and implementation of the least shelf life first-out inventory management policy in food banks. Application of the Gompertz model and Arrhenius equation based on time-temperature data …

Low Latency Anomaly Detection With Imperfect Models, Samrat Nath

Graduate Theses and Dissertations

The problem of anomaly detection deals with detecting abrupt changes/anomalies in the distribution of sequentially observed data in a stochastic system. This problem applies to many applications, such as signal processing, intrusion detection, quality control, medical diagnosis, etc. A low latency anomaly detection algorithm, which is based on the framework of quickest change detection (QCD), aims at minimizing the detection delay of anomalies in the sequentially observed data while ensuring satisfactory detection accuracy. Moreover, in many practical applications, complete knowledge of the post-change distribution model might not be available due to the unexpected nature of the change. Hence, the objective …

Hierarchical Multiagent Reinforcement Learning For Maritime Traffic Management, Arambam James Singh, Akshat Kumar, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

Increasing global maritime traffic coupled with rapid digitization and automation in shipping mandate developing next generation maritime traffic management systems to mitigate congestion, increase safety of navigation, and avoid collisions in busy and geographically constrained ports (such as Singapore's). To achieve these objectives, we model the maritime traffic as a large multiagent system with individual vessels as agents, and VTS (Vessel Traffic Service) authority as a regulatory agent. We develop a hierarchical reinforcement learning approach where vessels first select a high level action based on the underlying traffic flow, and then select the low level action that determines their future …

Route Choice Behaviour And Travel Information In A Congested Network: Static And Dynamic Recursive Models, Giselle De Moraes Ramos, Tien Mai, Winnie Daamen, Emma Frejinger

Research Collection School Of Computing and Information Systems

Travel information has the potential to influence travellers choices, in order to steer travellers to less congested routes and alleviate congestion. This paper investigates, on the one hand, how travel information affects route choice behaviour, and on the other hand, the impact of the travel time representation on the interpretation of parameter estimates and prediction accuracy. To this end, we estimate recursive models using data from an innovative data collection effort consisting of route choice observation data from GPS trackers, travel diaries and link travel times on the overall network. Though such combined data sets exist, these have not yet …

Développement D’Outils Pour L’Évaluation Du Processus D’Implantation Et L’Analyse Économique D’Une Intervention Ergonomique : Le Cas D’Une Intervention De Prévention Des Troubles Musculosquelettiques Dans L’Industrie De L’Abattage Et De La Transformation De La Volaille, Émilie Desjardins, Hélène Sultan-Taïeb, France St-Hilaire, Nicole Vézina, Élise Ledoux, Patricia Bélanger, Rita Naji

Rapports de recherche scientifique

Depuis les années 1990, Nicole Vézina et son équipe ont réalisé des travaux de recherche qui ciblent l’apprentissage de l’affilage et de l’aiguisage des couteaux dans un objectif de prévention des troubles musculosquelettiques (TMS). Le cas à l’étude est une intervention implantée dans le département d’éviscération d’une usine d’abattage et de transformation de la volaille située au Québec. Il s’agit d’une intervention ergonomique de prévention des TMS avec plusieurs types de transfert d’apprentissage dans un contexte de travail à la chaîne à cadence élevée. L’objectif général de cette étude était de développer des outils de collecte de données adaptés aux …

Designing An Adjustable And Transportable Staircase, Allison Currey

Undergraduate Honors Thesis Projects

People climb stairs every day, whether it is at work, a store, or at home; however, there are populations such as people who are elderly, with pathologies, with Parkinson’s disease, or have suffered from a stroke that see climbing the stairs as a challenging task and it decreases their mobility and quality of life. Factors such as muscle weakness, strategy, and balance have been previously investigated in these populations during stair climbing. However, few studies have researched how stair climb ability, balance, and perception of difficulty are influenced by step height. The objective of this thesis is to design a …

Aerial Screw Vtol Rotorcraft, Macale Rielly, Alexa Culp, Thomas Osteen, Adeline Perry

Senior Design Project For Engineers

Known as the “Renaissance Man,” DaVinci’s impressive knowledge of mechanics and inventive prowess would influence engineers and innovators hundreds of years later to make human flight a reality. However, due to the limited capacity of engineering and manufacturing at the time, his invention had been shallowly investigated in a production setting. This project strove to properly acknowledge DaVinci’s invention by thorough examination and critical analysis of his concept with the hopes of gaining a better understanding of why it is considered the “foundation of vertical flight”.

An iterative design approach was employed, utilizing faculty and university resources, team knowledge from …

Kennesaw State University - Maintenance Optimization And Cost Analysis, Mary E. Ogidigben, David T. Murphy, William L. Fowler

Senior Design Project For Engineers

The Department of Housing and Residence Life was looking for ways to improve the quality of their work while saving costs at the same time. The department allowed the team to look over their work orders where the team noticed over 50% of the work orders were related to room turnover. After this discovery, the team focused all efforts on room turnover and went over the process in detail with management. The team asked to see the standard operating procedure for room turnover and learned that most of the staff did not know they had one.

The team wanted to …

A System Dynamics Model Of Supply-Side Issues Influencing Beef Consumption In Nigeria, Kelechukwu G. Odoemena, Jeffrey P. Walters, Holger Maximilian Kleemann

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

The per capita consumption of beef in Nigeria is reducing amidst a rising population that is dependent on beef as a major source of animal protein. In this paper, a system dynamics (SD) model was developed with the aim of testing exploratory policies aimed at reversing this trend. The simulations of various policy tests showed that, of all the policies tested, having a higher carcass yield seems to be the most efficient solution, but its feasibility faces some steep biological and ecological challenges. However, a combination of policies that cuts across the land–cattle–market nexus is necessary to obtain a consumption …

When Optimal Isn’T Optimal, Robin Burk

Operations Management Presentations

Whether you’re an operations manager, a financial executive, an engineer, or an analyst, chances are you’ve been taught to optimize the outcomes of your decisions. And taken in a vacuum, that makes a good deal of sense. But as the new discipline of complex adaptive networks shows, in our heavily interconnected, interdependent world optimizing can introduce hidden vulnerabilities to surprisingly expensive failures. In this webinar we’ll discuss examples of such failures and identify conditions for which a satisfactory but not optimal solution is the best approach overall.

Multi-Objective Signal Timing Optimal Model For Rural-Urban Fringe Area Intersection, Xiaoyu Zhang, Chunfu Shao

Journal of System Simulation

Abstract: With the acceleration of the urbanization process in our country, the road traffic problems in the urban-rural fringe area are becoming serious. In order to improve the traffic efficiency, environmental benefits and traffic safety, a multi-objective optimal model for signal timing is established under the comprehensive consideration of several factors, such as the delay, capacity, number of stops and vehicle emissions. The genetic algorithm is used to solve the problem. A typical intersection is taken as the example for the analysis and the improved design schemes can be achieved and evaluated by the road traffic simulation. The …

Lightmap-Based Gi Collaborative Rendering System For Web3d Application, Shao Wei, Liu Chang, Jinyuan Jia

Journal of System Simulation

Abstract: For the real-time dynamic lighting rendering in low-end web environment, a view-independent collaborative real-time rendering system is presented. The whole system consists of a cloud renderer which produces the global illumination, a web renderer which computes the local illumination, and a scalable collaboration solution which takes the user behavior into account to adjust the range and frequency of the lighting computation. The cloud renderer computes the lighting data into the Lightmap, streams the Lightmap to the web client. After computing the direct light, the web renderer achieves the global illumination information by Sampling the Lightmap, and shows the …

Research On Modeling And Analyzing Method Of Task-Oriented Network Information System Of Systems, Zhu Tao, Weitai Liang, Songhua Huang, Jieyong Zhang

Journal of System Simulation

Abstract: As the catalyst and fusion agent of the system combat capability in the information age, the network information system of systems has been changing the form of information-based warfare and the mode of combat effectiveness generation. On the basis of studying the concept of the network information system of systems and introducing association mapping rules between tasks and systems, a new modeling and analyzing method of the network information system of systems with two dimensions and four networks, based on super-network and service-oriented characteristics, is proposed. The definitions of services information flow motif delay, the task execution accuracy …

Thinking On Digital Twin For Weapon System, Junhua Zhou, Junjie Xue, Heyu Li, Ji Hang, Tingyu Lin, Guoqiang Shi

Journal of System Simulation

Abstract: The main development process of the digital twin technology is reviewed and its necessity for the weapon system is put forward. The definition and composition of the digital twin for the weapon system is given and its application architecture and key technologies, such as the construction of the digital thread, bi-directional collaborative simulation and control, intelligent autonomous evolution, digital twin operation support based on the container-simulation-cloud, et al, are analyzed. The preliminary research and practice of some key technologies is expounded, and the future research directions are summarized and looked forward to.

Modeling And Propeller Location Optimization For Diving Propeller Vehicle, Jianjun Zhang, Yang Bing, Jinhui Wu, Yan Qiang

Journal of System Simulation

Abstract: Focus on the rapid physical exertion and the poor flexibility of diving propeller vehicle, a wearable diving propeller equipped with buoyancy control devices is proposed, and the position of the propeller in the device is optimized. The human body structure is regarded as a rigid body to establish a spatial 6-degree-of-freedom motion equation, and its surrounding hydrodynamic performance is analyzed. The hydrodynamic parameters in the model are obtained based on the FLUENT. The propeller position optimization model based on the minimum external force of rectilinear diving and slewing motions is established. The optimization results demonstrate that the optimized …

Research On Image Description Method Based On Neural Network, Kong Rui, Xie Wei, Lei Tai

Journal of System Simulation

Abstract: The automatic recognition and automatically describing image content is an important research direction to the artificial intelligence to connect the computer vision and the natural language processing. A method of describing the image content is proposed to generate the natural language by using the deep neural network model. The model consists of a convolutional neural network (CNN) and a recurrent neural network (RNN). The CNN is used to extract features of the input image to generate a fixed-length feature vector, which initializes the RNN to generate the sentences. Experimental results on the MSCOCO image description dataset show the syntactic …

Multi-Objective Dynamic Programming Algorithm Of Energy-Efficient Scheduling For Tow-Train, Xinyan Zhang, Yuqing Zhou

Journal of System Simulation

Abstract: To balance the performance and energy consumption of the mixed-model assembly lines effectively, a multi-objective energy-saving scheduling method for the tow-train is proposed. The energy-saving objective is introduced into the traditional material handling scheduling model for the tow-train and a multi-objective mixed integer programming model is constructed with two objective functions of minimizing the maximum line-side inventory and the total energy consumption. A forwards multi-objective dynamic programming based on the time window and dominance rules is presented to obtain the Pareto solutions: the definition for new states is given to obtain the Markov property, the time window and dominance …

Design Of Space-Based Surveillance Distributed Simulation System For Space Targets, Zhang Yang, Qingbo Gan, Yuan Hong, Jiangliang Fu, Chengming Sun

Journal of System Simulation

Abstract: Following the wide application of the HLA in the aerospace system simulation, the space-based surveillance distributed simulation system for the space targets based on the HLA is designed. In the infrastructure design level, the hierarchical structure including data layer, model layer and mission layer are designed. In the system design level, the simulation control members, space-based surveillance member, space target member, optical payload member, and visual simulation member are divided and confirmed. The orbit dynamics and maneuvering model, attitude dynamics and control model, payload pointing and optical imaging model are established. In system implement level, the …

One Design Mode Of Highly Configurable Modular Simulation System, Chunsheng Hu, Chengdong Xu, Penfei Zhang

Journal of System Simulation

Abstract: The computer simulation technology is an essential verification way to the design, construction and application optimization of the modern complex system. Following the continuous growing complexity of the system, the higher requirement on the configurability of the simulation system is needed to face the rapidly change. Based on the analysis on the configurability and some coupling factors with the adverse effect, a design mode of highly configurable and open and easy to expend modular simulation system is proposed. The results show that, despite the cost of some real-time performance, the design mode can realize the high configurability of the …

Modeling And Simulation Of Locating Water Resources For Forest Fire Extinguishing, Guoxiong Zhou, Li Tong, Aibin Chen, Mingfang He

Journal of System Simulation

Abstract: At the time of the forest fire, the effective water resource position is a good assistance to the firefighters to put out the fire. Taking a state-owned tree-farm, Huangfeng Bridge as an example in You Xian, an approach is proposed to optimally locate and determine the water resources to extinguish the forest fires, which uses the barycenter of a Weighted Voronoi Diagram and is generated dynamically via Cellular Automata and locally optimized by Alternative Location and Allocation algorithm. In order to reduce the low ratio impact of the water resource to the high fire risk areas, a barycenter model …

Cost-Efficiency Analysis Of Weapon System Portfolios For Effect Based Operation, Zhong Lin, Mingan Tong, Zhang Jian, Jianhai Liang

Journal of System Simulation

Abstract: In considertion of the cost-efficiency analysis of weapon system mainly for the target based operation, the uncertainties about preferences and possible interactions of different weapon systems, a cost-efficiency analysis method weapon system portfolios for effect based operation is presented. The framework of weapon system assignment for effect based operation is presented, the Bayesian network is used to build up the connection between effects and targets, and the cost-efficiency analysis model based on robust portfolio optimization is carried out. In view of the combinatorial explosion, the approximation algorithm based on the Tchebycheff norm and the linear integer programming is proposed …