Operations Research, Systems Engineering and Industrial Engineering Commons^™

Exploring Consultancy-Related Variations In Public Building Projects: A Review Towards A Management Framework, Grayson Bambaza, Ismail W. R. Taifa, George S, Mwaluko

Tanzania Journal of Engineering and Technology (TJET)

Consultancy-related variations remain one of the leading causes of cost overruns, schedule delays, quality deficiencies, and contractual disputes in public building projects. Although various studies have been undertaken to document the causes of variations in construction works, the same level of interest has not been shown for consulting services variations across the consulting services spectrum and their consequences for effective management. This study explores variations in consulting services for public works by systematically reviewing the existing literature using the PRISMA (Preferred Reporting Items for Systematic reviews and Meta Analyses) guidelines. Relevant articles published from 2020 to 2026 were retrieved from …

Urban Spatial Development Control In Tanzania: Analysis Of Factors Influencing Gis Application Using Structural Equation Modelling (Sem)., Happiness Protas Mmanda, Nestory Yamungu

Tanzania Journal of Engineering and Technology (TJET)

Rapid urbanization in developing countries has intensified urban expansion, creating challenges for sustainable development. Geographic Information Systems (GIS) enhance spatial planning, but empirical evidence on factors influencing their effectiveness remains limited. This study examines determinants of GIS application in Urban Spatial Development Control (USDC). The objectives are to (1) identify and categorize factors affecting GIS use, (2) assess relative strength, and (3) develop a validated structural model explaining GIS adoption in USDC. Data were collected from 103 LGAs by a mixed sampling method. Exploratory and Confirmatory Factor Analysis classified influencing factors into technology-related (α = 0.869, CR = 0.881), process-related …

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

C.S.A. Assessment - Tamp Family Health Center Portal, Delante Clark

Graduate Scholarship and Creative Works

This C.A.S. assessment evaluates how the Tampa Family Health Centers website influences userattention, cognitive processing, information accessibility, navigation efficiency, and digital user experience.The assessment examines whether the platform supports intentional engagement and informed decision-making while minimizing cognitive overload, distraction, confusion, and unnecessary attentional demands.

TFHC serves as a healthcare access portal providing appointment scheduling, patient resources, providerinformation, healthcare services, MyChart access, payment services, and community health resources.These functions make attention management and information clarity critical to successful user outcomes.

Stop Blaming My Users: Illumination Of The Technocentric Mythos Bias, Ervin H. Frenzel, Richard Lightcap

Journal of Cybersecurity Education, Research and Practice

 Abstract -This conceptual essay addresses the need for systemic and systematic transdisciplinary analytical techniques within cybersecurity and technical security. This conceptual essay is contingent upon recognition that cybersecurity is not simply technical in nature, it does not need an adversary, and more importantly it is based upon systems engineering and systems thinking.  The essay contributes a socio-technical attribution chain and field-specific ontology/taxonomy which distinguish user-triggered events from root causes, latent conditions, technical debt, validation failures, governance failures, and attribution bias before assigning responsibility to end users. It systematically defines an ontology inclusive of developer technical debt, organizational debt arising from …

Enhancing Community Engagement Through ‘Nitunze Kilombero’ Mobile App: Case Of Climate Land Use And Cover Management For Kilombero Basin, Ghanima Chanzi, Subira Munishi

Tanzania Journal of Engineering and Technology (TJET)

The Kilombero Basin in southeastern Tanzania faces significant challenges due to rapid land use and land cover (LULC) changes driven by climate change, population growth, and unsustainable farming practices. This study assessed the role of community engagement and digital reporting through the 'NITUNZE KILOMBERO', mobile application in supporting water resources management in the basin. The App facilitates real-time reporting of environmental issues, provides educational resources, and enables collaboration between local communities and authorities. A mixed-methods approach, including household surveys and key informant interviews, was employed to assess the app's effectiveness. Results indicate high community awareness of LULC impacts, with 85% …

Integrasi Metodologi Hazop Dalam Pengendalian Risiko Dan Keberlanjutan Operasional Pada Unit Pemulihan Urea: Studi Kasus Pada Industri Pupuk, Riny Yolandha Parapat, Arin Nur'aini Putri, Aryasatya Ramadhan Sukresno

National Journal of Occupational Health and Safety

The fertilizer industry is one of the chemical sectors with high-risk potential due to its operational processes involving hazardous materials as well as extreme pressure and temperature conditions. This study aims to identify and analyze hazards in the urea recovery unit using the Hazard and Operability Study (HAZOP) method, while also formulating effective risk control strategies to support the operational sustainability of the plant. The study was conducted directly at a commercial fertilizer plant in West Java using a semi-quantitative approach, which included field observations, review of technical documents such as Process Flow Diagrams (PFD), Piping and Instrumentation Diagrams (P&ID), …

Modeling Psychological And Demographic Predictors Of Analog Astronaut Mission Participation, Christian Yeara Herrero, Frányerson R. López Ochoa, Mackenzie Thomas, Phoebe Fleshman

Student Research Symposium (SRS)

As plans accelerate to send humans into orbit and to other celestial bodies, whether to lunar outposts, Mars bases, or commercial space stations, it becomes increasingly important to understand how to maintain healthy, cohesive, and productive crews in confined, isolated environments. A practical way to study human adaptation to these conditions is through analog astronaut missions on Earth. Although imperfect, these facilities provide the closest Earth-based simulation of space mission conditions. Currently, over ten analog research centers are operating worldwide, including NASA’s Human Exploration Research Analog (HERA) and the Crew Health and Performance Exploration Analog (CHAPEA) habitats. Selecting and recruiting …

Modeling Individual Self-Protective Behavior During Epidemics, Geonsik Yu, Michael J. Garee, Mario Ventresca, Yuehwern Yih

Faculty Publications

Protecting public health from infectious diseases requires collective action, as individual behaviors—such as vaccination and mask-wearing—directly influence disease dynamics. During the COVID-19 pandemic, unexpected public responses often undermined the effectiveness of interventions, highlighting the need to understand collective behavioral patterns and motivations to design more effective mitigation strategies. This study presents an agent-based simulation model that captures how individuals adjust self-protective behaviors based on evolving opinions about disease risk and examines how these decisions interact with external factors, such as public health interventions, to shape collective outcomes. To improve the representativeness of the simulated population, multiple datasets were integrated to …

Techno-Enviro-Economic Analysis Of Precipitated Calcium Carbonate Production From Carbon Dioxide In Cement Industry Flue Gas And Calcium Hydroxide, Natalia Debora Panggabean, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

CCUS is a technological solution to reduce emissions from the cement industry, which is the second largest CO2-intensive industry. This study aims to analyze technical, economic, and environmental performance of Precipitated Calcium Carbonate (PCC) synthesis in cement industry flue gas. The process simulation includes the CO2 capture system from cement plant, CO2 captured used as feedstock for PCC synthesis process through its reaction with calcium hydroxide. The simulation was carried out using ASPEN Plus software. Technical analysis was performed to determine the CO2 capture efficiency and PCC synthesis efficiency. Economic analysis was conducted to calculate CO2 capture cost and production …

Feasibility Analysis Of Thermal Oxidizer To Determine Remaining Life Using Fitness- For-Service Level 3 Method, Yudhi Yudistirawan, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra, Dewi Kurnia Suci, Agung Putra Mahardhika

Journal of Materials Exploration and Findings

An aged thermal oxidizer (TOX) in the oil and gas industry necessitates a comprehensive evaluation to ensure its continued safe operation. This study presents a Remaining Life Assessment (RLA) and a Fitness for Service (FFS) evaluation for the four main components of the TOX, in accordance with API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div-1 standards. The investigation includes the determination of maximum stress and maximum temperature required to assess the operational viability of the reactor. The four components are radiant, convection, transition, and stack sections—were modeled using the finite element method (FEM). Following the geometric modeling, …

Risk Identification Of Green Hydrogen Supply Chain In Ammonia Industry In Indonesia Using Delphi And Topsis Methods, Ananda Priatama, Sheila Tobing

Journal of Materials Exploration and Findings

The development of green hydrogen in Indonesia, while promising for supporting industrial decarbonization, remains in its early stages and faces various challenges across technical, economic, and regulatory domains. This study aims to identify and prioritize the risks linked to green hydrogen supply chain in Indonesia, particularly for applications in the ammonia industry. A set of 49 potential risk factors was initially compiled through literature review and prior studies. The Delphi method was employed with a panel of experts to validate these risks, ultimately refining the list to 27 critical risk factors. Subsequently, the Technique for Order Preference by Similarity to …

Assessing Passenger Electric Vehicle Growth Strategies And Their Impacts On Electricity Demand Load And Co2 Emissions In Aceh Province To Achieve Net Zero Emission Target By 2060, Taufik Hidayat, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

The electrification of the transport sector is a crucial pathway for achieving Indonesia’s Net Zero Emissions (NZE) target by 2060. This study assesses the potential impact of passenger electric vehicle (EV) penetration on electricity demand and CO2 emissions in Aceh Province through a scenario-based modelling approach. Two policy-aligned scenarios are assessed: a low-penetration (LP) scenario and a high-penetration (HP) scenario. Using the Gompertz model and the ASIF framework, total CO2 emissions were projected from 2020 to 2060. Results show that although higher EV penetration reduces direct emissions from internal combustion engine (ICE) vehicles, total CO2 emissions increase more significantly under …

Analysis Of Factors Enabling Organisational Governance Maturity For The Technical Audit Function In Tanzania, George C. Haule

Tanzania Journal of Engineering and Technology (TJET)

The study aimed to identify key factors contributing to Organisational Governance Maturity (OGM) of the Technical Audit Functions (TAF) in Tanzania.  The study employed a sequential approach as a research design.  The first step was to collect and analyse literature studies to identify factors enabling the OGM of the TAF.  Next, a questionnaire was administered to one hundred twenty-eight (128) respondents from seven (7) TAFs to rank the key enabling factors that were identified from the literature that influence the OGM of TAF in Tanzania.  Using data from a questionnaire administered to 128 respondents, a two-step strategy was employed to …

Revitalising Tanzania’S Textile Industry Through The Uk Textile System’S Role, Charles M. Kahabi

Tanzania Journal of Engineering and Technology (TJET)

Currently, there is the environmental and social challenges emerging from the global clothing and textile industry, specifically on textile waste management.  Additionally, the flow of second-hand clothing (SHC) between European countries especially the UK and Tanzania is increasing. In the UK, rapid growth of second-hand clothing (mitumba) driven by fast fashion results in vast quantities of discarded garments, of which only a fraction is recycled, leaving the remainder in landfills. Conversely, Tanzania has long depended on imported SHC a practice that, while affordable, has undermined local textile industries and contributed to waste accumulation. By examining Tanzania’s textile landscape, the research …

Security Risks Of Ai-Generated Code In Software Development, Maame Agyekum

Cybersecurity Undergraduate Research Showcase

Artificial Intelligence(AI) has recently forced change globally, public Institutions and as well as national security. Advancement in machine learning, mixed datasets have enabled significantly powerful systems while being capable of operating at a large scale. As innovation and technological advancement increases at rapid pace, issues like a regulation gap where scientific development far exceeds the government’s ability to regulate and establish an effective oversight. As a result, Artificial Intelligence has been controlled by private companies, leading to an industry where speed and profit often outweigh safety and ethical responsibility.

Ai-Scm Cmm: A Capability Maturity Model For Artificial Intelligence Integration In Supply Chain Management, Lordt Becklines, Omar F. El-Gayar, Patti Brooks, Insu Park

Annual Research Symposium

Artificial intelligence is increasingly deployed in supply chain management, yet many organizations struggle to align adoption efforts with process readiness, data quality, governance, and workforce capabilities, and they still lack validated supply chain specific roadmap for assessing readiness, sequencing investments, and reducing implementation risk. This study develops and evaluates a Capability Maturity Model for Artificial Intelligence Integration in Supply Chain Management to address that gap. Using a design science research approach, the study synthesizes prior literature and practitioner knowledge to define maturity dimensions, capability indicators, and staged progression levels for AI integration in supply chain contexts. The artifact and assessment …

A Dynamic Inspection And Replacement Policy For Systems Subject To Degradation And Periodic Shocks, Jiawen Hu, Qiuzhuang Sun

Research Collection College of Integrative Studies

Inspection is widely adopted to improve the maintenance efficiency. Most works predetermine a periodic inspection scheme and focus on optimizing the replacement threshold. However, it is reasonable to inspect less frequently when the degradation level of the system is low and to perform inspections more frequently as the degradation level increases. This work investigates a dynamic inspection and replacement policy for systems subject to regular degradation and periodic shocks. The regular degradation of the system is modeled as a Wiener process. Meanwhile, a periodic arrived shock will incur a random amount increment to the degradation, which is assumed to satisfy …

Proactive Safety Reasoning In Human-Robot Collaboration In Disassembly Through Llm-Augmented Stpa And Fmea, Morteza Jalali Alenjareghi, Fardin Ghorbani, Samira Keivanpour, Yuvin Adnarain Chinniah, Sabrina Jocelyn

Études primaires

Disassembly tasks in human–robot collaboration (HRC) environments present safety challenges due to hazardous materials, control system variability, and physically demanding operator tasks. To address these challenges, we propose an AI-augmented risk assessment framework integrating System-Theoretic Process Analysis (STPA) and Failure Mode and Effects Analysis (FMEA). This framework is implemented in four configurations: Term Frequency– Inverse Document Frequency (TF-IDF), Fine-tuned Large Language Models (LLMs), Retrieval-Augmented Generation (RAG), and RAG with a structured Knowledge Graph (KG) built from safety standards. The system supports real-time, standards-compliant safety reasoning by generating interpretable, context-specific recommendations. We evaluate these configurations across GPT-3.5 TURBO, GPT-4o, GPT-4.1, and …

A Three-Stage Causal Root-Cause Diagnostic Protocol For Nonstationary Industrial Time Series Data, Cansu Yalim, Resit Unal, Holly A. H. Handley

Engineering Management & Systems Engineering Faculty Publications

Predictive maintenance (PdM) systems effectively forecast failures, but they often fail to find root causes, particularly when system dynamics change over time. This limitation arises from applying static causal models or decoupled segmentation to handle nonstationary industrial time series. For regime-aware causal diagnostics and interventional effect estimation, we introduce a three-stage time-varying dynamic Bayesian network (TV-DBN) protocol. Using a minimum description length (MDL) objective that connects segmentation to mechanism changes, Stage I jointly infers change points and regime-specific graph structure. Stage II produces a completed partially directed acyclic graph (DAG) by orienting edges within each regime using a combination of …

Analysis Of Leakage In Nearshore Pipelines Using Fitness For Service Method To Ensure Mechanical Integrity Based On Api-579 Level 3, Elriandri Elriandri, Dedi Priadi

Journal of Materials Exploration and Findings

The Fitness for Service (FFS) analysis is performed as a quantitative assessment to evaluate the integrity condition of a pipeline. Essentially, FFS assessment helps determine whether equipment components can operate safely despite existing deficiencies. This evaluation is carried out using the Finite Element Method (FEM). In the case of an underwater pipeline that experiences leak due to anchor pull at the flange connection, it undergoes plastic deformation and is lifted approximately 1 meter. As a mitigation step, inspection and repairs have been carried out by the company. Subsequently, modeling is performed to reconstruct the deformation process of the pipeline. Then, …

Assessment Of The Melt Quality Of A 30% Scrap Adc12 Aluminium Alloy Using The Inclusion And Fluidity Measurement Instrument (Ifmi) With Mullite Ceramic Filters, Gusti Ruri Ruri Lestari, Sandya Ananda Riswan, Muhammad Anis, Ahmad Ashari, Paramita Vidya Ayuningtyas, Bambang Suharno Prof, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The increasing demand for sustainable practices in the metal casting industry has driven the use of recycled aluminum alloys such as ADC12. However, the addition of aluminum scrap tends to increase oxide inclusions, which reduce melt fluidity and compromise casting quality. This study utilizes the Inclusion and Fluidity Measurement Instrument (IFMI), equipped with mullite ceramic filters, to assess the melt quality of ADC12 aluminum alloy containing 30% scrap. Fluidity and inclusion characteristics were evaluated at five pouring temperatures (660°C, 680°C, 700°C, 720°C, and 740°C). The results show that fluidity increased with temperature, reaching a peak of 84.6 g·s⁻¹ at 740°C, …

Equipment Criticality Analysis To Determine Asset Integrity Management System Scheme In Supporting Production Optimization Scenarios In The Aeging Field, Donny Andryanto, Donanta Dhaneswara

Journal of Materials Exploration and Findings

This research investigates the production decline and cost increase in the X&Y oil and gas fields from 2022 to 2023. Production fell by 34%, while production costs per barrel rose by 79%. To address these issues, a series of optimization processes are proposed. These aim to restructure and enhance the production facilities to reduce current production costs. The optimizations include reducing pressure at the PPP Platform in 2024. Additional steps include shutting down CPP-ORF 14” pipelines and most processes at CPP 2 Platform by 2027 to convert it into an accommodation platform. Further, the plan involves optimizing the release of …

Morphological Test Of Areca Nut Fiber Ceramic Membrane Using Scanning Electron Microscopy Energy Dispersive X-Ray Mapping Spectroscopy, Amelia Marzain, Siti Umi Kalsum, Marhadi Marhadi, Ahmad Nabil Shahab

Journal of Materials Exploration and Findings

This study investigates the potential of ceramic membranes derived from areca nut fiber as a cost-effective and environmentally sustainable material for the removal of iron (Fe) and manganese (Mn) from groundwater. Two types of membranes were fabricated: one without activation and one chemically activated using 10% sodium hydroxide (NaOH). The morphological and elemental characteristics of both membranes were analyzed using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) mapping. The concentrations of Fe and Mn before and after treatment were measured using Atomic Absorption Spectroscopy (AAS). The NaOH-activated membrane exhibited a more porous surface structure and higher oxygen content, …

Resilience Engineering Via Bifurcation And Ecological Network Analysis: Demonstrated In An Electric Power Case Study, Rogelio Gracia Otalvaro

Doctoral Dissertations and Master's Theses

Modern systems are increasingly complex, interconnected cyber-physical systems that combine digital controls with physical infrastructure. This integration, along with the constant introduction of new technologies and actors into the network, enables reliable operation but introduces vulnerabilities to unexpected and varied disruptions and cascading failures, making resilience a critical concern. Traditional risk management and resilience assessment methods often struggle with the nonlinearity and dynamic behavior of these systems. This dissertation proposes a novel approach combining Bifurcation Analysis (BA) and Ecological Network Analysis (ENA) to enhance the understanding and improvement of system resilience. BA, a mathematical method from dynamical systems theory, is …

A Review Of The United States' Long Term War Support Capabilities In The Indo-Pacific Command Region, Brian J. Mullin Jr.

Theses and Dissertations

This study examines U.S. maritime transportation readiness in the Indo-Pacific, highlighting fleet age, mariner shortages, shipyard decline, and port vulnerabilities. It also considers contested logistics and technological threats. Recommendations include fleet recapitalization, mariner pipeline growth, port diversification, and defensive upgrades. The study concludes that secure sea line assumptions are outdated and calls for greater resilience, with follow-on efficiency analysis proposed for ports and ships.

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi

Journal of Materials Exploration and Findings

Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

One of the challenges in developing and archipelagic countries such as Indonesia is maintaining energy demand in rural and isolated areas due to difficulties in electrical distribution. For instance, in areas like Bawean Island, no additional electricity capacity has been introduced in the past year, leading to an unmet potential customer demand. One of the possible options is by utilizing Hybrid Renewable Energy Systems (HRES) that are integrated with existing fossil fuel-based energy systems to support the growing energy demand in the remote island. A case study in Bawean Island is conducted with the projected energy demand covers the energy …