Operations Research, Systems Engineering and Industrial Engineering Commons^™

Security Risks Of Ai-Generated Code In Software Development, Maame Agyekum

Cybersecurity Undergraduate Research Showcase

Artificial Intelligence(AI) has recently forced change globally, public Institutions and as well as national security. Advancement in machine learning, mixed datasets have enabled significantly powerful systems while being capable of operating at a large scale. As innovation and technological advancement increases at rapid pace, issues like a regulation gap where scientific development far exceeds the government’s ability to regulate and establish an effective oversight. As a result, Artificial Intelligence has been controlled by private companies, leading to an industry where speed and profit often outweigh safety and ethical responsibility.

A Causal Inference Methodology For Root-Cause Diagnosis In Nonstationary Industrial Time Series, Cansu Yalim

Knowledge and Creativity Expo

Industrial fault diagnosis lacks a procedure that learns time-varying causal structure from observational time series, makes identifiability limits explicit, and uses intervention-based reasoning to support root-cause assessment under industrial constraints. Although predictive maintenance can reduce downtime, diagnosis is often expert-rule-based or association-driven; pipelines may elevate downstream symptoms alongside true drivers and provide limited guidance on which feasible action would change a fault trajectory under current operating conditions. Because operating phases and fault progression create regime shifts, industrial systems rarely follow a single stable mechanism. This study develops and evaluates a three-stage, regime-aware causal diagnostic protocol based on a time-varying Dynamic …

A. Vs. I In Ai: Is There A Threshold To "Engineered" Intelligence?, Joshit Mohanty

Engineering Management & Systems Engineering Faculty Publications

Despite artificial intelligence reshaping the world, its development generates uncertainties regarding future capabilities. AI simultaneously exists as an artifact of engineering design and as autonomous intelligence, creating an observer-participant feedback loop. This paper proposes that embodied AI faces a bandwidth-limited intelligence threshold T_h that it arises from B = min(C_sens,C_Act). However, Shannon capacity measures bits while intelligence operates on concepts, necessitating a dual-channel model separating physical bandwidth B_io from representational capacity B_rep. Intelligence emerges as multi-dimensional rather than scalar, with components exhibiting different bandwidth dependencies. Surpassing T_h requires either new sensing methods expanding B, enhanced representational frameworks, or reconceptualization within …

Part Ii: Industrial Information Integration Review 2020-2025, Jinzhi Li

Information Technology & Decision Sciences Faculty Publications

Industrial Information Integration Engineering (IIIE) has become increasingly essential for improving operational efficiency and harmonizing heterogeneous industrial systems through advanced digital integration approaches. Fueled by rapid advancements in Industry 4.0 technologies—including digital twins, artificial intelligence, immersive interfaces, and IoT infrastructures—IIIE is substantially transforming traditional enterprise architecture and integration frameworks. This systematic review synthesizes recent developments and emerging trends, with particular attention to the accelerating adoption of digital twins and the deepening convergence between operational technologies (OT) and information technologies (IT) across multiple sectors. While notable progress has been made, significant challenges persist, especially in developing resilient integration architectures and fully …

A Macrocognitive Design Taxonomy For Simulation-Based Training Systems: Bridging Cognitive Theory And Human-Computer Interaction, Jessica M. Johnson

Virginia Digital Maritime Center (VDMC) Faculty Publications

Simulation-based training systems are increasingly deployed to prepare learners for complex, safety-critical, and dynamic work environments. While advances in computing have enabled immersive and data-rich simulations, many systems remain optimized for procedural accuracy and surface-level task performance rather than the macrocognitive processes that underpin adaptive expertise. Macrocognition encompasses higher-order cognitive processes that are essential for performance transfer beyond controlled training conditions. When these processes are insufficiently supported, training systems risk fostering brittle strategies and negative training effects. This paper introduces a macrocognitive design taxonomy for simulation-based training systems derived from a large-scale meta-analysis examining the transfer of macrocognitive skills from …

Distilling The Complexity Of Agent-Based Simulations Into Textual Explanations Via Large Language Models, Noé Y. Flandre, Philippe J. Giabbanelli

VMASC Publications

Communicating the design and results of agent-based models (ABMs) to subject matter experts is challenging, which hinders participation and limits trust in simulation-based decision support. Large language models (LLMs) can communicate ABMs as textual summaries, thus complementing traditional disclosure through statistical and visualization techniques. While prior work translated the structure of conceptual models into narratives via LLMs, our extension covers the dynamics of simulation models via an automated simulation-to-text method that extracts contextual information from NetLogo ABMs, performs repeated simulations, and generates narrative descriptions (including the model’s purpose, parameters, and simulation dynamics) using mutimodal LLMs. Furthermore, four summarization algorithms spanning …

Distributed Semi-Speculative Parallel Anisotropic Mesh Adaptation, Kevin Garner, Polykarpos Thomadakis, Nikos Chrisochoides

Computer Science Faculty Publications

This paper presents a distributed memory method for anisotropic mesh adaptation that is designed to avoid the use of collective communication and global synchronization techniques. In the presented method, meshing functionality is separated from performance aspects by utilizing a separate entity for each - a multicore cc-NUMA-based (shared memory) mesh generation software and a parallel runtime system that is designed to help applications leverage the concurrency offered by emerging high-performance computing (HPC) architectures. First, an initial mesh is decomposed and its interface elements (subdomain boundaries) are adapted on a single multicore node (shared memory). Subdomains are then distributed among the …

Toward Secure And Practical Machine Learning-Based Access Control: A Framework With Real-World Constraints And Adversarial Analysis, Olusesi Balogun, Mohammad Ghasemigol, Zhipeng Cai, Daniel Takabi

School of Cybersecurity Faculty Publications

Attribute-Based Access Control (ABAC) frameworks coordinate access requests based on subject, object, and environment attributes, as well as policy rules, and are widely used in corporate security systems. Recently, machine learning has been applied to ABAC to address policy-generation imbalances, misassigned privileges, and attribute leakages. However, existing MLBAC techniques do not consider the structural constraints and attribute interdependencies present in traditional ABAC systems. Moreover, these frameworks have not been extensively evaluated under black-box attack scenarios. To address these gaps, we propose extensions to MLBAC that integrate structural constraints, attribute dynamism, and attribute weighting into the MLBAC objective function. Additionally, we …

From Comparison To Integration: Building Energy Simulation Tool Variability And The Case For Intelligent Retrofit Workflows, Amir Safari, Dalya Ismael, Mahsa Safari, James Freihaut

Engineering Technology Faculty Publications

As the urgency to address climate change and modernize energy infrastructure grows, the building sector plays a key role in improving energy efficiency and reducing carbon emissions. This study evaluates five energy retrofit strategies for Building 101 at The Navy Yard in Philadelphia, comparing two real-world proposals from energy service companies with three simulation-based packages derived from Building Energy Simulation (BES) tools. The study examined whether advanced BES tools provide greater accuracy and decision-making value compared to simpler alternatives. Electricity savings ranged from 5 % to 40 %, gas savings from 29.7 % to 61 %, and annual cost reductions …

Generative Ai And Llm Applications In Renewable Energy And Smart Grids: A Systematic Review For The Sustainable Energy Transition, Umit Cali, Ugur Halden, Merlinda Andoni, Ferhat Ozgur Catak, Si Chen, Benoit Couraud, Emre Kantar, Samuel Knapper, Ibrahim Kucukdemiral, Huseyin Kusetogullari, Murat Kuzlu, Yashar Mousavi, Sonam Norbu, Taha Selim Ustun, David Flynn

Engineering Technology Faculty Publications

The global energy transition toward decarbonization and digitalization requires advanced methods to manage decentralized, data-intensive cyber-physical energy systems. This systematic review analyzes 106 research studies on Generative Artificial Intelligence (GenAI) and Large Language Models (LLMs) in renewable energy and smart grids, organized into seven application clusters covering forecasting, system design, operation, reliability, data and cybersecurity, and energy markets. The review situates these applications within a Cyber-Physical-Social Systems (CPSS) framework. Results show that GANs dominate current applications (47.2%), followed by LLMs (10.4%) and VAEs (9.4%), with growing adoption of diffusion and score-based models (7.5% each). Selected studies report improved probabilistic forecasting …

Adaptive Electric Vehicle Routing And Charging With Deep Reinforcement Learning, Mandana Farhang Ghahfarokhi, Hyoshin Park, Venktesh Pandey, Gyugeun Yoon

Engineering Management & Systems Engineering Faculty Publications

As electric vehicles (EVs) gain popularity, efficient routing and charging solutions remain challenging due to time-dependent travel variability, sparse charging infrastructure, and heterogeneous user preferences. To address these challenges, this paper introduces a decision-support system that integrates three complementary methods: Temporal Multimodal Multivariate Learning (TMML) for real-time characterization of travel time uncertainty, Time-Dependent Shortest Path (TDSP) for reliability-aware route choice, and Deep Q-Network (DQN) reinforcement learning for adaptive charging decisions in sparse infrastructure environments. TMML updates link-level travel time distributions in real-time through Bayesian inference with cluster-based propagation, reducing uncertainties across the network. TDSP leverages these updated distributions to estimate …

Identifying Industry-Preferred Automation Software In Engineering: An Indeed-Based Analysis To Inform Engineering Technology Curriculum Design, Triet Minh Phan, Collins Okafor, Winifred Okafor, Devang Mehta, Mohsen Souissi, Jenora Waterman, Connie Mayberry, Misty Thomas, Orlando Ayala, Angie Price, Maurizio Manzo

Engineering Technology Faculty Publications

In the evolving field of automation engineering, staying aligned with industry software demands is critical to preparing graduates for the modern workforce. This study investigates the prevalence of leading industrial automation platforms—Rockwell / Allen-Bradley (RSLogix / Studio 5000), Siemens (TIA Portal / Step 7), and Schneider Electric (EcoStruxure / Unity Pro)—across job postings collected from Indeed using the keyword "automation engineering." The research compiles a structured dataset of job postings with seven fields: ID, Job Title, Organization, Rockwell / Allen-Bradley, Siemens, Schneider Electric, and Posting URL. Each entry is manually coded to indicate whether the listed software platforms are mentioned, …

A Three-Stage Causal Root-Cause Diagnostic Protocol For Nonstationary Industrial Time Series Data, Cansu Yalim, Resit Unal, Holly A. H. Handley

Engineering Management & Systems Engineering Faculty Publications

Predictive maintenance (PdM) systems effectively forecast failures, but they often fail to find root causes, particularly when system dynamics change over time. This limitation arises from applying static causal models or decoupled segmentation to handle nonstationary industrial time series. For regime-aware causal diagnostics and interventional effect estimation, we introduce a three-stage time-varying dynamic Bayesian network (TV-DBN) protocol. Using a minimum description length (MDL) objective that connects segmentation to mechanism changes, Stage I jointly infers change points and regime-specific graph structure. Stage II produces a completed partially directed acyclic graph (DAG) by orienting edges within each regime using a combination of …

Seeing The Invisible Load: Xr+ Multimodal Sensing For Cognitive Ergonomics In Industrial Training, Jessica M. Johnson, Andwele Grant

Virginia Digital Maritime Center (VDMC) Faculty Publications

Extended reality (XR) technologies are increasingly positioned as disruptive Industry 5.0 tools for human-centric industrial training and intelligent human–system integration. Coupled with multimodal sensing (eye tracking, EEG, HRV, GSR, and other physiological signals), XR environments promise to make otherwise invisible cognitive demands observable, especially for novice trainees entering complex industrial settings. Yet the evidence base is fragmented: (1) there is no quantitative synthesis of the cognitive ergonomics benefits of XR plus sensing; (2) little is known about which XR–sensor configurations yield the strongest effects; (3) prior reviews rarely focus on industrial and manufacturing tasks; (4) multimodal signals are used predominantly …

Optimizing Maintenance Routes For Highway Infrastructure Using Leader-Follower Autonomous Vehicles, Qing Tang, Chenxi Chen, Xianbiao Hu, Yuxin Ding, Tianjia Yang

Civil & Environmental Engineering Faculty Publications

The Autonomous Truck Mounted Attenuator (ATMA), a leader–follower style connected and automated vehicle system, enhances safety during transportation infrastructure maintenance in work zones. However, the significantly lower speed of ATMA, compared to regular vehicles, causes moving bottlenecks that reduce roadway capacity and prolong queuing, leading to further delays. Different ATMA routes lead to varying patterns of time-dependent capacity drop, affecting the user equilibrium traffic assignment and resulting in differing system costs. This study aims to optimize ATMA routing within a network to minimize the system cost associated with its slow-moving operation. To this end, a queuing-based traffic assignment approach is …

Bridging Mission And Execution: Integrating Participatory Design In Early-Phase Mission Engineering For Stakeholder Alignment And Mission Clarity, Rafi Soule

Knowledge and Creativity Expo

This research examines mission framing during the early phase of Mission Engineering. Stakeholder interpretations diverge under ambiguity. Interoperability constraints are often not surfaced early. These conditions reduce mission clarity and weaken mission-to-system mapping readiness. The study integrates a participatory design-inspired, artifact-first workflow with RAG-enabled retrieval from a closed corpus to support evidence-grounded reasoning and traceable citations.

Phase 1 uses an online survey to establish baseline patterns in practice (N = 86). Shared understanding is positively associated with mission clarity (r = 0.60, p < 0.001). Phase 2 uses a time-bounded comparative workshop with two conditions. Expert reviewers rate mission statement quality higher for the participatory design condition (mean 3.5) than the traditional condition (mean 2.8). Technical feasibility ratings are similar across conditions. Phase 3 demonstrates RAG-enabled, closed-corpus, retrieval-supported traceability using the Referencer tool. It is reported as a proof-of-concept for evidence-grounded rationale and auditability, and as a pathway …

Generative Ai-Driven Optimization In Flexible And Reconfigurable Manufacturing Systems, Salah Hammedi, Hicham Chaoui, Lotfi Nabli

Electrical & Computer Engineering Faculty Publications

Flexible and Reconfigurable Manufacturing Systems (FRMSs) are essential for coping with variability in modern production environments; however, efficient scheduling and rapid reconfiguration remain challenging. This paper presents a hybrid optimization framework that integrates Colored Petri Net (CPN) modeling with Generative Artificial Intelligence (GenAI) to enhance scheduling performance and system adaptability. The CPN formalism ensures verifiable modeling of system dynamics, while a transformer-based generative model produces candidate scheduling and reconfiguration strategies. Simulation experiments were conducted under static, dynamic, and adaptive scenarios, including machine breakdowns and dynamic job arrivals. Performance was evaluated using makespan, mean flow time, machine utilization, and reconfiguration latency. …

Generalized Inverter Fault Detection Using Normalized Current Features And A Lightweight Bilstm Network, Mohammad Zamani Khaneghah, Mohamad Alzayed, Hicham Chaoui

Electrical & Computer Engineering Faculty Publications

Fault detection and diagnosis of three-phase inverter-fed motor drives is essential for ensuring system reliability, safety, and continuous operation in applications such as electric vehicles and industrial automation. This paper proposes a data-driven fault detection framework based on normalized current features and a lightweight bidirectional long short-term memory (BiLSTM) network which can be generalized to different motor power rating in the same controller system. A compact set of six time-domain features, consisting of the mean and root-mean-square (RMS) values of the phase currents, is extracted and normalized with respect to the average RMS value. This normalization effectively removes dependency on …

Statewide Corridor Evacuation Response And Re-Entry Behaviors In Florida During Hurricane Irma, Xin Wang, Yuan Zhu, Hong Yang, Kun Xie

Electrical & Computer Engineering Faculty Publications

Hurricane Irma stands as one of the most destructive tropical storms to make landfall in the United States, particularly impacting the State of Florida, where it prompted the largest evacuation in history with approximately 7 million residents. The profound consequences of mass evacuation underscore the critical need to understand travel behaviors during hurricane evacuation and the recovery process. This research analyzes statewide evacuation and re-entry patterns, leveraging diverse datasets, including TTMS data from main corridors and GIS data. A statewide corridor-based empirical analysis framework is constructed to characterize evacuation and re-entry response patterns using sensor-based traffic observations. The results show …

Improving Medical Diagnostics With Vision-Language Models: Convex Hull-Based Uncertainty Analysis, Ferhat Ozgur Catak, Murat Kuzlu, Taylor Patrick, Michel Audette

Engineering Technology Faculty Publications

In recent years, vision-language models (VLMs) have been applied to various fields, including healthcare, education, finance, and manufacturing, with remarkable performance. However, concerns remain regarding VLMs’ consistency and uncertainty, particularly in critical applications such as healthcare, which demand a high level of trust and reliability. This paper proposes a novel approach to evaluate uncertainty in VLMs’ responses using a convex hull approach on a healthcare application for visual question answering (VQA). For any VLM, temperature refers to a sampling parameter used in probabilistic generation, which controls the randomness of the model’s output. The LLM-CXR model is selected as the medical …

Comparative Analysis Of Emergent Behaviors Of Three Drone Swarm System Models For Targeting Using Agent-Based Modeling And Simulation, Arsenio T. Gumahad Ii

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation introduces a novel computational simulation framework for evaluating the emergent behaviors of three swarm drone models using Agent-Based Modeling and Simulation (ABMS). The three swarm models are a Leader-Follower swarm model based on Bruckstein's antline theory, a Flocking model based on a simplified Reynolds 'Boids’ model, and a Stigmergic model with pheromone-based coordination. The primary objective of the simulation is to evaluate the performance of these models in delivering a user-defined number of drones of each type to a target area of interest in four separate scenarios, resulting in 50,000 separate simulation trials. Each scenario was structured to …

A Methodology For Model-Based Certification, Jay Albert Silverman

Engineering Management & Systems Engineering Theses & Dissertations

A need for a single source of knowledge for design decisions has led to the development of a new field of systems engineering, model-based systems engineering (MBSE) (Delligati, 2014). System certification is defined as affirming that regulatory requirements for a system have been met (Goodwin & Juzaitis, 2006). System certification is a specific application of system validation. System verification can be defined as ensuring that the system of interest (SOI), as designed, is in accordance with the design inputs/requirements. System validation can be defined as ensuring that the SOI, as designed, meets the defined system needs (Wolfgand, Katz, & Wheatcraft, …

Systems Statistical Engineering – Hierarchical Fuzzy Constraint Propagation, Hengameh Fakhravar

Engineering Management & Systems Engineering Theses & Dissertations

Driven by the growing need in the 21st century for integrating rigorous statistical analysis into engineering research, there is a movement to develop an integrated statistical engineering science within statistics and quality communities (Hoerl & Snee, 2010; Anderson-Cook et al., 2012). Systems Statistical Engineering research seeks to integrate the Causal Bayesian hierarchical modeling (Pearl, 2009) and cybernetic control theory within Beer’s Viable System Model (1972, 1979, 1985) and the Complex Systems Governance framework (Keating, 2014; Keating & Katina, 2015, 2016) to produce multivariate systemic models for robust dynamic systems mission performance. Cotter & Quigley (2018) set forth the Bayesian systemic …

Complex System Governance And Cyber Operations, Willie Gernard Mccallister

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation examines the potential integration of Complex System Governance (CSG) within cybersecurity, emphasizing the development of a reference model for Cybersecurity Infrastructures. Traditional strategies for securing digital environments have struggled to address the intricate and dynamic layers inherent in modern cybersecurity systems. The purpose of this research is to explore the applicability of CSG as a framework to assess cybersecurity infrastructure using a case study research design. The research addresses two key questions: (1) How can the CSG reference model be adapted to explore cybersecurity infrastructure? (2) What results from CSG based exploration of cybersecurity infrastructure through a case …

Mission Engineering Competencies Workshop Report: Roles, Responsibilities, And Skills, James D. Moreland, Jr. (Editor), Thomas Irwin, Robert-Allen Baker

Center for Mission Engineering (CME) Publications

This report summarizes the findings of a two-day Old Dominion University Mission Engineering Workshop involving the U.S. Navy, U.S. Marine Corps, U.S. Air Force, National Aeronautics and Space Administration, the University of New South Wales, and Old Dominion University, focused on defining the roles, competencies, and skills essential to Mission Engineering. It presents a structured competency framework and offers recommendations to guide workforce development, training, and cross-agency collaboration in support of complex, mission-driven systems.

Carbon Accountability Scores: A Process-Oriented Approach For Carbon Offsetting Using Ai Agents, Joshit Mohanty, Vaishali Vaishali

Graduate Student Government Association Research Conference

Conventional carbon offset programs rely on quantified emissions to determine balancing requirements. While this approach offers a standardized means of measuring carbon output, it often provides industries with a loophole—allowing them to offset their emissions by purchasing equivalent credits for activities such as tree planting rather than tackling inefficiencies at the source. This research proposes a process-based framework called Carbon Accountability Scores (CA scores) to offer a proactive strategy for assessing and reducing carbon footprints. Instead of focusing on the mere balancing of emitted and sequestered carbon, CA scores integrate an organization’s operational processes into the calculation, thereby offering the …

Digital Thread: Bridging Macro–Micro Services In System-Of-Systems, Joshit Mohanty

Graduate Student Government Association Research Conference

Organizations and industries increasingly rely on distributed services in decentralized environments—ranging from large-scale, system-of-system architectures to fine-grained, agent-based microservices. While this distributed paradigm offers flexibility and innovation, it presents critical challenges such as interoperability gaps, inconsistent data formats, and a lack of holistic oversight. Traditional integration approaches, including ad-hoc middleware or enterprise service buses, tend to solve these issues reactively. As a result, technical debt accumulates, stakeholder misalignments persist, and scaling to new demands becomes complex.

This research proposes digital thread (DT) as the unifying framework to create an authoritative source of truth: a continuous flow of information across the …

Meta-Clustering For Specialized Language Models: Enhancing Contextual Adaptation And Mitigating Hallucinations In Diverse Healthcare Environments, Joshit Mohanty, Vaishali Vaishali, Sandeep Kumar Nayak, Sumit Lahiri

Graduate Student Government Association Research Conference

Large Language Models (LLMs) have significantly advanced conversational AI by enabling dialogic information-seeking and task execution across diverse domains. However, their extensive parameters and broad domain scope lead to “data hallucinations.” These shortcomings are particularly evident in dynamic and diverse environments like India’s healthcare sector, where myriad languages, regional practices, and cultural nuances demand specialized, localized expertise rather than one-size-fits-all generalist models. This paper introduces a meta-clustering framework that integrates Distilled Language Models (DLMs) and Small/Specialized Language Models (SLMs) with meta-learning principles to address these limitations. By drawing on evidence from works such as MedHalu and Med-HALT, the framework seeks …

Tamos: Task-Aware Multi-Agent Orchestrator System, Joshit Mohanty, Sandeep Kumar Nayak, Sumit Lahiri

Graduate Student Government Association Research Conference

Large language models (LLMs) are increasingly at the core of multi-agent systems (MAS). However, the high resource demand, error propagation, and lack of adaptive evaluation mechanisms pose significant challenges in deploying these agentic solutions at scale. To address these concerns, this research proposes a Task-Aware Multi-Agent Orchestrator System designed to refine the agentic framework, categorizing tasks autonomously, assigning specialized evaluation datasets, and balancing token usage against functional effectiveness. This approach underscores robust data management, including AsyncHow, Mosaic AI, and Synthetic Preference Optimization (PO) corpora. Each dataset targets specific dimensions of agent performance, such as dynamic task decomposition and tool integration …

Graphtreemed: A Hybrid Graph-Tree Rag Architecture For Mission-Critical Medical Applications, Joshit Mohanty, Sandeep Kumar Nayak, Sumit Lahiri

Graduate Student Government Association Research Conference

Studies within engineering management indicate that decision-making is often based on the cognitive processing of grouped and pictographic information clusters entangled with high-level pattern recognition. Similarly, graph-based retrieval-augmented generation (RAG) architectures substantially improve diagnostic accuracy and interpretability, while tree-structured systems reduce critical misses through hierarchical reasoning. However, existing solutions often lack a unified framework that seamlessly integrates these two paradigms to address the multifaceted demands of mission-critical healthcare settings. This proposal introduces GraphTreeMed, a novel hybrid RAG architecture designed to harness the complementary strengths of graph-based and tree-based retrieval mechanisms, thereby advancing the safety and efficacy of clinical decision support …