Operations Research, Systems Engineering and Industrial Engineering Commons^™

Evolving Ai Integration In Complex Medical Decision-Making And Multidisciplinary Transplant Care: A Systematic Review Of Human-Ai Collaboration, Rachel L. Dzieran, Cihan H. Dagli, Robert J. Marley

Engineering Management and Systems Engineering Faculty Research & Creative Works

Purpose of Review: Artificial intelligence (AI) in healthcare has evolved dramatically from early expert systems, which were initially considered replacements for clinical judgment, to today's collaborative frameworks that aim to augment physician decision-making. This evolution is particularly crucial in domains such as transplant surgery, where decisions carry irreversible consequences and require the integration of complex, often ambiguous data. Drawing on peer-reviewed literature from 2019 to 2025, we conducted a systematic review that analyzed key elements distinguishing successful human-AI partnerships from those that fail. Recent Findings: The ideal balance incorporates human expertise into AI systems through weighted integration approaches, rather than …

Artificial Intelligence Decision Support And Pilot Performance, Aarohi Srivastava

Discovery Day - Daytona Beach

The integration of artificial intelligence (AI) into aviation decision support systems (DSS) introduces new opportunities for pilots. While these systems offer considerable benefits, ensuring safe and optimal human-AI interaction requires further research. In the case of student pilots, trust calibration, system transparency, and appropriate reliance are all factors that influence the operational success of an integrated AI system. The systems are designed with the goal of decreasing cognitive workload, increasing situational awareness (SA), and providing data-based recommendations to help the pilot make quick and accurate decisions. This study will evaluate the effects of disclosed vs undisclosed AI accuracy on student …

Human Factors Challenges In Automated Flight Operations, Jorge Ivan Gonzalez Rivera, Zoe Guyette, Emma Hatten, Katie Huynh, Benjamin Marsh

Discovery Day - Daytona Beach

Automation complacency, a critical aviation hazard, is commonly seen amongst flight crews in high-automation commercial flight decks. This issue occurs when over-reliance on automated systems leads to a decline in manual flying expertise and situational awareness, posing a severe risk of loss of control in-flight (LOC-I) and catastrophic accidents. To bridge the safety gap between current operational demands for efficiency and the regulatory requirement for pilot proficiency, this study proposes the Manual Flight Compliance and Monitoring System (MFCMS). This solution integrates engineering and administrative controls to reduce automation-related risks by mandating 15 minutes of manual flight per hour during cruise …

Customization That Clicks: Human Factors Evaluation Of A User-Centered Vehicle Customization System, Noah Clark, Shawn Mathura, Sarah Bailey, Paul Seal, Brandon Ibarra, Kailey Hrbek, Carissa Aumack, Kevin Sun, Olivia Honan, Kelly Nguyen, Caroline Deck, Brandon D. Dreslin

Discovery Day - Daytona Beach

Older adults (OAs) and drivers with disabilities (DwDs) often encounter challenges when customizing vehicle features (e.g., seat adjustment, lighting, climate control) because existing human-machine interfaces (HMIs) may not be designed to accommodate diverse sensory, motor, and cognitive capabilities. HarmonIQ is a biometric-based, user-centered vehicle customization system designed to improve accessibility and inclusivity for OAs and DwDs, developed by Embry-Riddle Aeronautical University (ERAU) in collaboration with Bethune-Cookman University (BCU). This research, supported in part by the EcoCAR Electric Vehicle Challenge, builds on Fall 2024 proofs-of-concept and Spring 2025 initial development of HarmonIQ and its components, namely the driver profile software and …

C.S.A. Assessment - Tamp Family Health Center Portal, Delante Clark

Graduate Scholarship and Creative Works

This C.A.S. assessment evaluates how the Tampa Family Health Centers website influences userattention, cognitive processing, information accessibility, navigation efficiency, and digital user experience.The assessment examines whether the platform supports intentional engagement and informed decision-making while minimizing cognitive overload, distraction, confusion, and unnecessary attentional demands.

TFHC serves as a healthcare access portal providing appointment scheduling, patient resources, providerinformation, healthcare services, MyChart access, payment services, and community health resources.These functions make attention management and information clarity critical to successful user outcomes.

Stop Blaming My Users: Illumination Of The Technocentric Mythos Bias, Ervin H. Frenzel, Richard Lightcap

Journal of Cybersecurity Education, Research and Practice

 Abstract -This conceptual essay addresses the need for systemic and systematic transdisciplinary analytical techniques within cybersecurity and technical security. This conceptual essay is contingent upon recognition that cybersecurity is not simply technical in nature, it does not need an adversary, and more importantly it is based upon systems engineering and systems thinking.  The essay contributes a socio-technical attribution chain and field-specific ontology/taxonomy which distinguish user-triggered events from root causes, latent conditions, technical debt, validation failures, governance failures, and attribution bias before assigning responsibility to end users. It systematically defines an ontology inclusive of developer technical debt, organizational debt arising from …

Late-Night And Early-Morning Train Scheduling With Non-Traffic Hour Maintenance Window In Urban Rail Transit Systems, Yaochen Ma, Hai Yang, Hai Wang

Research Collection School Of Computing and Information Systems

Regular maintenance during non-traffic hours (NTH) is vital for the resilience of urban rail transit (URT) systems, yet an insufficient NTH maintenance window poses a challenge for URT systems in various cities. For instance, the Hong Kong MTR Corporation has noted that the required NTH maintenance time often exceeds the available window, prompting service adjustments such as earlier late-night closures and/or later early-morning starts. To address this challenge, this study develops an optimal scheduling framework that links late-night and early-morning URT services through the NTH maintenance window requirement to maximize public welfare. A Decoupled Optimization Model (DOM) first derives closed-form …

Online Planning Of Power Flows For Power Systems Against Bushfires Using Spatial Context, Jianyu Xu, Qiuzhuang Sun, Yang Yang, Huadong Mo, Daoyi Dong

Research Collection College of Integrative Studies

A power station or transmission line can be affected due to bushfires, increasing operation costs. We study a fundamental but challenging problem of planning the optimal power flow (OPF) for power systems under bushfires. We develop a model to capture the stochastic nature of bushfire spread based on Moore’s neighborhood model and propose an online optimization modeling framework to sequentially plan power flows in the electricity network. Our framework assumes that bushfire spread is non-stationary over time and that the spread and containment probabilities are unknown. To address these challenges, we develop a contextual online learning algorithm that treats the …

Leveraging A Centralized Fleet Assignment Management For An Aviation Resilience, Inof Seno Acton Mr., Sutanto Soehodho, Nahry Yusuf

Smart City

Since deregulation in the aviation industry, competition among airlines has intensified. This competition is shown by the increasing number of routes, service times, aircraft, and airports served. This competition causes not all flight services to meet their targets, resulting in aircraft operating less efficiently. Passenger seats are not filled, and flight delays are becoming more frequent. Obviously, this will negatively impact consumers and the airline's finances. The study focused on assigning the fleet used to serve flights to maintain existing aviation services and improve aircraft operational efficiency. This study aims to maximize profits by optimizing fleet assignments through the Centralized …

Can Generative Ai Make Farming Decisions? Current Status And Future Pathways: A Case Study In Row Crop Production With Chatgpt, Nipuna Chamara, Yufeng Ge, Joe Luck, Yu Pan, Saleh Taghvaeian, Cory Walters, Christopher Proctor, Daran Rudnick, Daren Redfearn

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The agricultural decision-making process is experience-based, knowledge-dependent, time-sensitive, complex, and driven by historical data. Planting, fertilization, irrigation, and chemigation are key categories in farm decision-making, and currently there is no one-shot decision-support tool that covers all these activities. Generative Artificial Intelligence (AI) models are more advanced than traditional machine learning and deep learning models. These models have been trained on vast amounts of data from the internet, allowing them to accept unstructured data in various forms and generate human-like text, solutions to problems, and scenario predictions. Given this capability, we became interested in exploring the potential of generative AI in …

Extensive And Intensive Margin Labor Supply On Ride-Sourcing Platforms, Hao Sun, Hai Wang, Zhixi Wan

Research Collection School Of Computing and Information Systems

The rapid expansion of ride-sourcing platforms has enabled freelance drivers to flexibly determine both their participation and working hours. Understanding this flexible labor supply behavior is essential for managing platform capacity and evaluating the impacts of pricing and incentive policies on driver welfare. This study develops a labor supply model in which drivers optimally choose whether to participate (extensive margin) and how long to work (intensive margin) to maximize their utility from consumption and leisure. The model incorporates heterogeneity in drivers’ other income, idle time, and participation costs, allowing us to analytically characterize equilibrium labor supply decisions. The results show …

To Wait Or To Transfer? A Three-Level Optimization Framework For Intermodal Transfer Coordination In First Train Timetabling And Bus Bridging Services Management, Hao Li, Liujiang Kang, Norman Weik, Huijun Sun, Qingying Lai, Zhiguang Cao

Research Collection School Of Computing and Information Systems

This study addresses the integrated optimization of the first train timetabling and bus bridging service design (FTT-BBSD) for morning transfer challenges, two critical but interdependent passenger services in the public transit system. In contrast to most existing studies and conventional approaches, this study explicitly models the influence of passenger path choices and transfer mode selections on FTT-BBSD. Through a novel dual-level network representation that integrates subway and bus systems, we formulate the FTT-BBSD problem as a mixed-integer nonlinear programming model. The model simultaneously determines subway and bus timetables and bridging line deployment to minimize total travel time for all first …

Long-Term Mine Planning: A Survey Of Classical, Hybrid And Artificial Intelligence-Based Methods, Nurul Asyikeen Azhar, Aldy Gunawan, Shih-Fen Cheng, Erwin Leonardi

Research Collection School Of Computing and Information Systems

The aim of long-term mine planning (LTMP) is two-fold: to maximize the net present value of profits (NPV) and determine how ores are sequentially processed over the lifetime. This scheduling task is computationally complex as it is rife with variables, constraints, periods, uncertainties, and unique operations. In this paper, we present trends in the literature in the recent decade. One trend is the shift from deterministic toward stochastic problems as they reflect real-world complexities. A complexity of growing concern is also in sustainable mine planning. Another trend is the shift from traditional operational research solutions — relying on exact or …

Material Costs, Karima Weinman

Masters Theses

This thesis investigates how migration fatality and disappearance data can be reinterpreted through material craft to create a more reflective encounter with information. Working with the Missing Migrants Project's dataset, this project asks how design can communicate dimensions of human loss that conventional data visualization cannot reach.

The work situates contemporary border violence within a longer colonial history, arguing that the logics of surveillance and quantification that structured European imperial expansion persist in the databases that govern mobility in the Mediterranean today.

Terrazzo is a 15th-century Venetian flooring technique built from discarded fragments bound together into a unified surface. This …

Factors Affecting Pedestrian-Vehicle Conflicts: An Empirical Analysis, Christo D. Jamo

Honors Scholar Theses

The number of pedestrian deaths increased by 78% between 2009 and 2023, while other motor vehicle crash deaths increased by 13% in the same period [1]. To identify potential pedestrian safety measures, this study analyzed the effects of location-based demographics, pedestrian phasing type, and other physical infrastructure and behavior variables on the probability of pedestrian-vehicle conflicts at signalized intersections, which is a surrogate measure of crash risk. Data were collected from 55 intersections in Connecticut, and the pedestrian-vehicle interactions were classified by severity based on the Swedish Traffic Conflict Technique: undisturbed passage, potential conflict, minor conflict, or serious conflict. Because …

Feasibility Study Of Transitioning From Thick Plates (0.250”) Mounted On 30-Point Pvc Carriers To Thinner Plate Technologies Mounted On Recyclable Foam And Pet (0.155”) For Post-Print Corrugated, Nathaniel J. Poole

All Theses

In the United States, the most common press configuration for brown-box printing is a 0.280” undercut press. These press configurations have long relied on thick 0.250” plates mounted on 0.030” PVC sheets to print onto corrugated substrates. Each year, around twenty million pounds of waste are produced by the printing industry, through paper waste, plate waste, among other materials. One large factor of that waste is flexographic plate waste, which either ends its life in a landfill or is repurposed into other products. This study establishes a comparison between traditionally used 0.250” plates on 30pt PVC versus 0.155” plates mounted …

A Macrocognitive Design Taxonomy For Simulation-Based Training Systems: Bridging Cognitive Theory And Human-Computer Interaction, Jessica M. Johnson

Virginia Digital Maritime Center (VDMC) Faculty Publications

Simulation-based training systems are increasingly deployed to prepare learners for complex, safety-critical, and dynamic work environments. While advances in computing have enabled immersive and data-rich simulations, many systems remain optimized for procedural accuracy and surface-level task performance rather than the macrocognitive processes that underpin adaptive expertise. Macrocognition encompasses higher-order cognitive processes that are essential for performance transfer beyond controlled training conditions. When these processes are insufficiently supported, training systems risk fostering brittle strategies and negative training effects. This paper introduces a macrocognitive design taxonomy for simulation-based training systems derived from a large-scale meta-analysis examining the transfer of macrocognitive skills from …

Five Tensions Of Artificial Intelligence Adoption For Organ Allocation: Applying The Technology–Organization–Environment Framework, Amaneh Babaee, Daniel Burton Shank, Casey I. Canfield, Joely Grace Hall, Krista L. Lentine, Henry Randall, Mark Schnitzler

Psychological Science Faculty Research & Creative Works

Background: The US organ transplantation system is pursuing modernization of the allocation process through the integration of new technologies such as artificial intelligence (AI). However, the legal and ethical issues within the transplantation industry are still of concern. Objective: We explore the opportunities and challenges for Organ Procurement Organizations (OPOs) to adopt AI. The US organ transplant system is a highly regulated industry yet open to innovation. Methods: Ten structured interviews were conducted with OPO representatives using the Extended Technology, Organization, Environment (TOE) framework. Results: Overall, we identified five core tensions in AI adoption: (1) misconceptions, (2) approach to training, …

Instructional Fidelity In Virtual Flight: Applying A Structured Learning Model For Vr-Based Pilot Training, Lindsay Gouedy, Bryce Jarrell, Mary Fendley, Brandon Wolf

Journal of Aviation/Aerospace Education & Research

As immersive training technologies reshape the future of aviation education, this study explores the impact of integrating Virtual Reality (VR) into a structured instructional model for B-52 pilot training. With the development and implementation of the I-BUFF (Integrated B-52 Unit Flight Familiarization) model, an innovative framework built upon the 4C/ID (Four Component Instructional Design) and SEEV (Salience, Effort, Expectancy, Value) models, this research evaluates whether structured VR environments improve training transfer and accelerate task proficiency for in-air refueling tasks. A sample of 233 pilot trainees was assessed across three groups: traditional training (non-VR unstructured), VR semi-structured, and VR fully structured …

From Comparison To Integration: Building Energy Simulation Tool Variability And The Case For Intelligent Retrofit Workflows, Amir Safari, Dalya Ismael, Mahsa Safari, James Freihaut

Engineering Technology Faculty Publications

As the urgency to address climate change and modernize energy infrastructure grows, the building sector plays a key role in improving energy efficiency and reducing carbon emissions. This study evaluates five energy retrofit strategies for Building 101 at The Navy Yard in Philadelphia, comparing two real-world proposals from energy service companies with three simulation-based packages derived from Building Energy Simulation (BES) tools. The study examined whether advanced BES tools provide greater accuracy and decision-making value compared to simpler alternatives. Electricity savings ranged from 5 % to 40 %, gas savings from 29.7 % to 61 %, and annual cost reductions …

Identifying Industry-Preferred Automation Software In Engineering: An Indeed-Based Analysis To Inform Engineering Technology Curriculum Design, Triet Minh Phan, Collins Okafor, Winifred Okafor, Devang Mehta, Mohsen Souissi, Jenora Waterman, Connie Mayberry, Misty Thomas, Orlando Ayala, Angie Price, Maurizio Manzo

Engineering Technology Faculty Publications

In the evolving field of automation engineering, staying aligned with industry software demands is critical to preparing graduates for the modern workforce. This study investigates the prevalence of leading industrial automation platforms—Rockwell / Allen-Bradley (RSLogix / Studio 5000), Siemens (TIA Portal / Step 7), and Schneider Electric (EcoStruxure / Unity Pro)—across job postings collected from Indeed using the keyword "automation engineering." The research compiles a structured dataset of job postings with seven fields: ID, Job Title, Organization, Rockwell / Allen-Bradley, Siemens, Schneider Electric, and Posting URL. Each entry is manually coded to indicate whether the listed software platforms are mentioned, …

Utilising Video Recordings To Assess Student Pilot Performance: An Exploratory Study During A Simulated Training Flight, Bradley Moncion, Shi Cao, Allison Lynch, Suzanne K. Kearns, Elizabeth Irving, Ewa Niechwiej-Szwedo

Journal of Aviation/Aerospace Education & Research

In ab initio flight training, the quality of the feedback a flight instructor provides their student is essential to their success. While other high-performance and safety-critical industries have incorporated the use of video recordings into training and assessments, the aviation industry generally has not. There are some studies addressing the potential benefits of video recordings in training professional pilots, but there is a lack of research at the ab initio level. In this study, five flight instructors assessed the performance of student pilots conducting a simulated training flight using a 4-point marking scale. The flights instructors were then tasked with …

Seeing The Invisible Load: Xr+ Multimodal Sensing For Cognitive Ergonomics In Industrial Training, Jessica M. Johnson, Andwele Grant

Virginia Digital Maritime Center (VDMC) Faculty Publications

Extended reality (XR) technologies are increasingly positioned as disruptive Industry 5.0 tools for human-centric industrial training and intelligent human–system integration. Coupled with multimodal sensing (eye tracking, EEG, HRV, GSR, and other physiological signals), XR environments promise to make otherwise invisible cognitive demands observable, especially for novice trainees entering complex industrial settings. Yet the evidence base is fragmented: (1) there is no quantitative synthesis of the cognitive ergonomics benefits of XR plus sensing; (2) little is known about which XR–sensor configurations yield the strongest effects; (3) prior reviews rarely focus on industrial and manufacturing tasks; (4) multimodal signals are used predominantly …

Too Warm To Win Big? Unpacking The Backer Dynamics Behind Female Crowdfunding Success Using A Warmth And Competence Perspective, Dan Liu

Journal of International Technology and Information Management

While crowdfunding is often heralded as a democratized funding avenue that empowers women with higher success rates, this study reveals a more nuanced picture of gender dynamics. The Stereotype Content Model suggests that women are often perceived as warmer but less competent. Using a large dataset from Kickstarter, we find that female-led projects can attract more backers, likely due to warmth-driven appeal, but receive smaller average contributions, potentially due to concerns about risk linked to lower perceived competence. However, the total funding raised by female-led campaigns is comparable to that of male-led ones, showing no clear advantage or disadvantage. This …

Online Community Dynamics: An Analysis Using Louvain During Major Sporting Events, Anushka Jaint, Yashodhan Karulkar, Kashish Jindal, Sri Sai Harshita Gadavarthi, Sanya Gulati

Journal of International Technology and Information Management

With the power of social media transforming the way people connect and interact with each other, the dynamics of community formation on platforms such as X during major events are of crucial importance. While social media is an increasingly key driver in determining interactions, little is known about the online influence forming and developing fan communities in high-stakes events. This study looks into the development of user communities for datasets drawn from Kaggle on two of the world’s largest sporting events: the FIFA World Cup 2022, or football, and the T20 World Cup 2022, or cricket, with the aim of …

The Role Of Ict In Enhancing National Logistics Performance And Economic Productivity, Jin Ho Kim

Journal of International Technology and Information Management

This study sheds light on the transformative impact of Information and Communication Technology (ICT) on national productivity via logistics performance. By distinguishing between mobile and wired Internet speeds, the research demonstrates how these technologies influence logistics performance and, in turn, national productivity across different economic contexts. The findings reveal a nuanced relationship between ICT and logistics performance, with mobile ICT playing a more significant role in developing countries due to its accessibility and cost-effectiveness. In contrast, developed countries benefit from a balanced integration of both mobile and wired ICT. Moreover, the study highlights the mediating role of logistics performance in …

Blockchain As A Digital Coordination Infrastructure For Project Management: A Systematic Review And Integrative Framework, Cherie Bakker Noteboom, Sai Neelima Seru, Aravindh Sekar

Journal of International Technology and Information Management

Blockchain technology has gained increasing attention as a digital infrastructure capable of improving transparency, trust, and coordination in complex, multi-organizational project environments. However, existing research on blockchain-enabled project management remains fragmented and industry-focused, providing limited guidance for organizational adoption and integration. This study addresses this gap through a systematic literature review of 29 peer-reviewed studies, following PRISMA guidelines, to examine how blockchain capabilities are incorporated into project management practices across industries and maturity stages.

Grounded in Resource-Based View and Coordination Theory, the analysis employs a feature-to-process mapping approach to link six core blockchain capabilities—decentralization, transparency, immutability, smart contracts, traceability, and …

The Value Of Personal Data Ecosystems: A Flemish Media Sector Case Study, Maarten De Mildt, Melanie Verstraete, Sofie Verbrugge, Didier Colle

Journal of International Technology and Information Management

Personal Data Stores (PDSs) have been proposed as a privacy-preserving approach to data sharing that increases individual control over personal data while enabling new forms of cross-organizational collaboration. This collaboration leads to the emergence of Personal Data Ecosystems (PDEs). Despite growing interest in PDEs, limited research has examined how the organizational and economic barriers identified in prior studies manifest in practice. This paper investigates these challenges through a case study of the Flemish media sector within the Solid4Media project, which explores the use of PDSs to support data sharing and personalization across media organizations. Using a qualitative research design, data …

Responsible People Analytics For Remote-Work Decisions: A Machine-Learning Benchmark For Classifying Perceived Productivity, Ruth Menjivar, Nima Molavi, Narges Mashhadi Nejad

Journal of International Technology and Information Management

This study examines whether employee-perception survey data can support responsible people-analytics decisions about remote-work productivity. Using the public New South Wales (NSW) Remote Working Survey 2021 (N=1,512), the study benchmarks statistical and machine-learning classifiers for self-reported perceived productivity classes (same, less, or more productive when working remotely relative to onsite work), not objective output, under default, class-weighted, and resampling protocols. Main evidence comes from 5×5 repeated stratified cross-validation using macro F1 and balanced accuracy with fixed model specifications. Class-balanced separability is modest. Random Forest, CatBoost, and LightGBM form a leading cluster with overlapping confidence intervals (macro F1 ≈0.51–0.52). Affective/well-being items, …

Towards Developing A Career Technology Fit Framework And Analyzing Its Influence On Work-Related Outcomes Among It Professionals, Gunjan Tomer

Journal of International Technology and Information Management

With growing attrition rate and significant demand for skilled IT professionals, the importance of studying their behaviour has become important for both academia and industry. Despite ample amount of research, there is still a gap between theory and practice. Based on our qualitative study conducted on Indian IT professionals we propose that technology allocation might contribute in understanding the behaviour of IT professionals. We found that IT professionals evaluate the technology allocated to them based on their individual career motives. This evaluation, either positive or negative, influences their job outcomes. Further, we explored the factors that make a technology preferable …