Operations Research, Systems Engineering and Industrial Engineering Commons^™

A Building Energy Efficiency Optimization Method By Evaluating The Effective Thermal Zones Occupancy, Anna Laura Pisello, Michael Bobker, Franco Cotana

Publications and Research

Building energy efficiency is strongly linked to the operations and control systems, together with the integrated performance of passive and active systems. In new high quality buildings in particular, where these two latter aspects have been already implemented at the design stage, users’ perspective, obtained through post-occupancy assessment, has to be considered to reduce whole energy requirement during service life. This research presents an innovative and low-cost methodology to reduce buildings’ energy requirements through post-occupancy assessment and optimization of energy operations using effective users’ attitudes and requirements as feedback. As a meaningful example, the proposed method is applied to a …

An Automated Forward Operating Base Electrical Distribution System Simulator, Onur Kahveci, Mariesa L. Crow, Steven Corns

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, an automated forward operating base electrical distribution system simulator (ODCC) is developed. the ODCC has been developed based on the open platform distribution system simulator (DSS) that is able to create variable models of electrical systems and performing many types of analysis. © 2012 IEEE.

College Of Engineering Senior Design Competition Fall 2012, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Senior Design Experience

Part of every UNLV engineering student's academic experience, the Senior Design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs and prototypes a product in this required element of the curriculum. Working in teams, the senior design project encourages students to use everything learned in the engineering and computer design programs to create a practical, real world solution to an engineering challenge.

Beyond the classroom ...

Because of the requirement to work in teams, students also build good communication skills, presentation skills and even business writing skills. They also have to …

Strider: Manufacturing Processes, Michael Warren-Angelucci

Industrial and Manufacturing Engineering

The goal of the Strider Project is to create a mobility device that can support a person with weakened leg strength and enable them to be supported and maintain a standing position. A prototype of the Strider was created by three Mechanical Engineering students as their senior project. The topic of this senior project was to analyze and create a manufacturing process for the manufacture of the Strider that will be ergonomic and cost effective.

There were many things that needed to be accomplished in order to create the manufacturing process. The first step was to verify that the prototype …

Applications Of Cobb-Douglas Production Function In Construction Time-Cost Analysis, Ashkan Hassani

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Cobb-Douglas Production Function was widely used in economics and productivity studies across many sectors. The function’s quantitative modeling of resource inputs and production outputs is appealing to the research domain of construction management. In this thesis we explored this function’s application in construction schedule crashing and project risk analysis related to duration of construction projects. Existing research on construction time-cost tradeoff issues rarely explore the origin of the crashing cost which is defined as the cost needed to shorten the project to the desired duration. In the existing literature crashing cost function was either assumed without much justification, or came …

Three-Dimensional Indoor Rfid Localization System, Jiaqing Wu

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Radio Frequency Identification (RFID) is an information exchange technology based on radio waves communication. It is also a possible solution to indoor localization. Due to multipath propagation and anisotropic interference in the indoor environment, theoretical propagation models are generally not sufficient for RFID-based localization. In fact, the radio frequency (RF) signal distribution may not even be monotonic and this makes range-based localization algorithms less accurate. On the other hand, range free localization algorithms, such as k Nearest-Neighbor (kNN), require reference tags to be spread throughout the whole three-dimensional (3D) space which is simply not practical. In this work, a hybrid …

Modeling System Of Systems Acquisition, Nil Kilicay-Ergin, Paulette Acheson, John Colombi, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

System of systems (SoS) acquisition is a dynamic process of integrating independent systems. This paper describes modeling of the SoS acquisition environment based on the Wave Process Model. Agent-Based modeling methodology is utilized to abstract behavioral aspects of the acquisition process. © 2012 IEEE.

Acuta Enews December 2012 Vol. 41, No. 12

ACUTA Newsletters

In this issue...

Strategic Planning & Tampa in January

ACUTA Is Looking for a Few Good Coordinators

Wi-Fi Goes Gigabit-802.11 ac

Info Links

Preparing the Workplace for "Deep Diversity"

Get Your Logos Here!

Webinar: Universal Service & Royalty Payments Due

Using Social Media to Connect

Thanks to Our 2012 Exhibitors

Number 10 on a List of 10 Hard Things IT Must Learn to Accepts

Welcome New Members

Check It Out

Machining Stability Of Wire Edm Of Titanium, Farnaz Nourbakhsh

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

This work presents an experimental investigation of wire electro-discharge machining (WEDM) of titanium alloy. The outstanding characteristics of titanium alloys such as their compatibility and noticeable physical, mechanical and biological performances has led to increased application of them in various industries especially in biomedical industries over the last 50 years. However, due to low thermal conductivity of titanium and its alloys and their reactivity with cobalt in most tool materials, there are some difficulties in machining titanium and its alloys by conventional machining. On the other hand, unconventional machining processes especially Wire Electrical Discharge Machining (WEDM) are more appropriate techniques …

A Simulation-Based Decision Support System To Model Complex Demand Driven Heathcare Facilities, Amr Arisha, Michael Thorwarth

Conference papers

Simulating healthcare processes is a sophisticated endeavor. Treatment processes and patient arrival patterns differ significantly in their statistical attributes and implicate a high degree of variability. In addition, there are several types of interconnected processes of medical staff involved that accompany a patient’s journey through the healthcare facility. Replicating this behavior with process flow models in a discrete event simulation model is highly complex and therefore difficult to create while maintaining a high degree of precision. A framework is thus introduced which delivers an algorithm that allows to implement Multiple Participant Pathway Modeling (MPPM) under the consideration of Flexible Resource …

Multi-Citeria Framework For An Emergency Department In An Irish Hospital, Waleed Abo Hamad, Amr Arisha

Conference papers

Health research is one of these priorities in every economy and through this research an emphasis will be put on translational research in the context of more sustainable and efficient healthcare system (translation of operations management practices to clinical applications). Healthcare systems in general and Emergency Departments in particular around the world are facing enormous challenges in meeting the increasingly conflicting objectives of providing wide accessibility and efficiency while delivering high quality and prompt services. The proposed framework integrates simulation modeling, balanced scorecard, and multi-criteria decision analysis aiming to provide a decision support system to emergency department managers. Simulation outputs …

Managing Elective And Non-Elective Case Assignments For An Operating Room Suite, Narges Hosseini

All Dissertations

The success of operating room management depends on all levels of decision making, from strategic to tactical and operational decisions. One key decision in systems with block booking is to assign sufficient amount of block time to surgeons and surgery groups. While the typical method of block assignment identifies the share of surgery groups from OR times based on average of past usage, this method does not count for the difference between cost of under and overtime. One of the goals of this research is to develop a decision framework for block assignment. This work is presented in chapter two. …

Sustainability For Die Manufacturing: Comparative Study Of Wedm And Milling, Matthew S. Kalus

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Sustainability is more important in today's culture due to the increasing demand for a more eco-friendly society. Concentrations in minimizing and reducing environmental impacts, energy and natural resources have been forthcoming in industry. The tool, mold and die industries are the most well known industries that machine harder materials using mills and WEDM. The objective of this thesis was to compare the sustainability differences in both of these machines utilizing the accepted standards for evaluating the manufacturing process performance for sustainability. These standards include the evaluation of the process parameters, raw materials, power, tools and fluids which all contribute to …

An Unabridged Approach To Lean Implementation: Understanding The Impact Systemically And Supporting The Operational Changes, Joseph D. Wolkiewicz

Industrial Technology Theses

Lean Material Strategy (Lean) has become a governing principle for many companies. These strategies help managers identify waste within the process, and once visible, drive it from the system. One of the principal objectives of this approach is to achieve greater manufacturing efficiency. It is current practice, at a publically held automotive corporation (Company X), to employ Lean in new program launches for its manufacturing sites. While Lean served as the theoretical foundation for design of new assembly systems at Company X sites, insufficient consideration was given to developing an integrated “big picture” solution to the implementation of these new …

Cytoskeletal Strains In Modeled Optohydrodynamically Stressed Healthy And Diseased Biological Cells, Sean S. Kohles, Yu Liang, Asit K. Saha

Mechanical and Materials Engineering Faculty Publications and Presentations

Controlled external chemomechanical stimuli have been shown to influence cellular and tissue regeneration/degeneration, especially with regards to distinct disease sequelae or health maintenance. Recently, a unique three-dimensional stress state was mathematically derived to describe the experimental stresses applied to isolated living cells suspended in an optohydrodynamic trap (optical tweezers combined with microfluidics). These formulae were previously developed in two and three dimensions from the fundamental equations describing creeping flows past a suspended sphere. The objective of the current study is to determine the full-field cellular strain response due to the applied three-dimensional stress environment through a multiphysics computational simulation. In …

Flow Behavior Modeling And Process Control Of Electrically-Assisted Forming (Eaf) For Sheet Metals In Uniaxial Tension, Joshua Jones

All Dissertations

This work studies the influence of an applied electrical current on magnesium sheet metal and introduces models which are successful in predicting the deformation behavior (i.e. material flow stress, local material strain, and thermal response). Also, this work examined the theory of electroplasticity by studying prior proposed theories and by quantifying the prior theories potential for improved dislocation mobility. From this analysis, a single dominant mechanism is determined and the theory of electroplasticity is explained using this single mechanism. The theory discussed in this work is supported by experimental testing and microstructure analysis.
In addition to studying the exact electroplastic …

Lagrangian Relaxation For Large-Scale Multi-Agent Planning, Geoffrey J. Gordon, Pradeep Varakantham, William Yeoh, Hoong Chuin Lau, Ajay S. Aravamudhan, Shih-Fen Cheng

Research Collection School Of Computing and Information Systems

Multi-agent planning is a well-studied problem with various applications including disaster rescue, urban transportation and logistics, both for autonomous agents and for decision support to humans. Due to computational constraints, existing research typically focuses on one of two scenarios: unstructured domains with many agents where we are content with heuristic solutions, or domains with small numbers of agents or special structure where we can provide provably near-optimal solutions. By contrast, in this paper, we focus on providing provably near-optimal solutions for domains with large numbers of agents, by exploiting a common domain-general property: if individual agents each have limited influence …

Fast Variable Selection For Memetracker Phrases Time Series Prediction, Yoan Miche, Tatiana Chistiakova, Anton Akusok, Amaury Lendasse, Rui Nian, Alberto Guilléhn

Engineering Management and Systems Engineering Faculty Research & Creative Works

This Paper Proposes a Methodology using a Fast Variable Selection as a Modified Version of the Forward-Backward Algorithm. This Methodology is Adapted to the Specificities of the Data Used: Very Small Number of Samples and High Number of Variables. Such Data is Generated using Underlying Dependencies and Seasonality Assumptions, from Meme Phrases Volume Data. by the Use of a Resampling Technique Along with the Proposed Variable Selection Scheme, Significant Results Are Obtained, and the Test Normalized Mean Square Error Performances Are Improved. the Results Indicate that with the Assumptions Made on the Data Structure, Variable Selection is Desirable. Also, the …

Updated Force Model For Milling Nickel-Based Superalloys, Andrew Henderson

All Dissertations

Nickel-based superalloys are commonly used in applications which require high strength and resistance to creep and oxidation in extreme conditions. All nickel-based superalloys are considered difficult to machine; however, cast gamma-prime-strengthened nickel-based superalloys are more difficult to machine than common nickel-based superalloys. Machining comprises a significant portion of manufacturing processes and with advancements in technology and material properties, the methods and models used must be adapted in order to keep pace.
In this research, correlations are made, using fundamental principles, between measurements made with on-machine touch probes and the cutting tool's wear state, those correlations are used in an adaptive …

Integrated Production And Distribution Problem With Single Perishable Product, Wennian Li

All Dissertations

This dissertation investigated the extension of the Integrated Production and Distribution Scheduling Problem (IPDSPP) using a variety of perishable products, applying the JIP principle and make-to-order strategy to integrate the production and distribution schedules. A single perishable product with a constant lifetime after production was used in the model discussed here. The objective of the problem was to find the solution that results in minimal system total transportation costs while satisfying customer demand within a fixed time horizon. In the solution, the fleet size, vehicle route and distribution schedule, plant production batch size and schedule were determined simultaneously. This research …

Supply Chain Network Design: Risk-Averse Vs. Risk-Neutral Decision Making, Alireza Madadi

All Dissertations

Recent events, such as the Heparin tragedy, highlight the necessity for designers and planners of supply chain networks to consider the risk of disruptions in spite of their low probability of occurrence. One effective way to hedge against supply chain network disruptions is to have a robustly designed supply chain network. This involves strategic decisions, such as choosing which markets to serve, which suppliers to source from, the location of plants, the types of facilities to use, and tactical decisions, such as production and capacity allocation. In this dissertation, we focus on models for designing supply chain networks that are …

On The Maintenance Modeling And Optimization Of Repairable Systems: Two Different Scenarios, Suzan Alaswad

Graduate Theses and Dissertations

The use of mathematical modeling for the purpose of analyzing and optimizing the performance of repairable systems is widely studied in the literature. In this dissertation, we study two different scenarios on the maintenance modeling and optimization of repairable systems. First, we study the long-run availability of a traditional repairable system that is subjected to imperfect corrective maintenance. We use Kijima's second virtual age model to describe the imperfect repair process. Because of the complexity of the underlying probability models, we use simulation modeling to estimate availability performance and meta-modeling to convert the reliability and maintainability parameters of the repairable …

A Process Analysis Of Engineering Problem Solving And Assessment Of Problem Solving Skills, Sarah Grigg

All Dissertations

In the engineering profession, one of the most critical skills to possess is accurate and efficient problem solving. Thus, engineering educators should strive to help students develop skills needed to become competent problem solvers. In order to measure the development of skills, it is necessary to assess student performance, identify any deficiencies present in problem solving attempts, and identify trends in performance over time. Through iterative assessment using standard assessment metrics, researchers/instructors are able to track trends in problem solving performance across time, which can serve as a gauge of students' learning gains.
This research endeavor studies the problem solving …

A Mechanism For Organizing Last-Mile Service Using Non-Dedicated Fleet, Shih-Fen Cheng, Duc Thien Nguyen, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

Unprecedented pace of urbanization and rising income levels have fueled the growth of car ownership in almost all newly formed megacities. Such growth has congested the limited road space and significantly affected the quality of life in these megacities. Convincing residents to give up their cars and use public transport is the most effective way in reducing congestion; however, even with sufficient public transport capacity, the lack of last-mile (from the transport hub to the destination) travel services is the major deterrent for the adoption of public transport. Due to the dynamic nature of such travel demands, fixed-size fleets will …

Lagrangian Relaxation For Large-Scale Multi-Agent Planning, Geoff Gordon, Pradeep Varakantham, William Yeoh, Hoong Chuin Lau, Shih-Fen Cheng

Research Collection School Of Computing and Information Systems

Multi-agent planning is a well-studied problem with various applications including disaster rescue, urban transportation and logistics, both for autonomous agents and for decision support to humans. Due to computational constraints, existing research typically focuses on one of two scenarios: unstructured domains with many agents where we are content with heuristic solutions, or domains with small numbers of agents or special structure where we can provide provably near-optimal solutions. By contrast, in this paper, we focus on providing provably near-optimal solutions for domains with large numbers of agents, by exploiting a common domain-general property: if individual agents each have limited influence …

Knowledge-Driven Autonomous Commodity Trading Advisor, Yee Pin Lim, Shih-Fen Cheng

Research Collection School Of Computing and Information Systems

The myth that financial trading is an art has been mostly destroyed in the recent decade due to the proliferation of algorithmic trading. In equity markets, algorithmic trading has already bypass human traders in terms of traded volume. This trend seems to be irreversible, and other asset classes are also quickly becoming dominated by the machine traders. However, for asset that requires deeper understanding of physicality, like the trading of commodities, human traders still have significant edge over machines. The primary advantage of human traders in such market is the qualitative expert knowledge that requires traders to consider not just …

Acuta Enews November 2012 Vol. 41, No. 11

ACUTA Newsletters

In this issue...

Hurricane Sandy Arrives on Campus

Hurricanes, Seminar & Toy Phones

Webinar: The Future of Emergency Communication in Higher Ed

Getting Ready for HD Voice

ACUTA Member Benefit: Free Corporate Webinar Webpage

Every Desk a Drafting Table: The Power of a Design Mindset

Info Links

Fall 2012 Seminar Exhibitors and Sponsors

Board Report

Bring 8 Fall Seminar Exhibitors and Sponsors

Welcome New Members

Check It Out

Process Improvements For Establishing Cmmi Certification At Company Xyz, Megan Farrell

Industrial and Manufacturing Engineering

CMMI stands for Capability Maturity Model Integration and is an enterprise-wide Process-Improvement model that provides a set of best practices that addresses productivity, performance, costs, and stakeholder satisfaction. This improvement model is generally used in computer software companied and not only does it improve their processes, but many contracts will only be awarded with those companies who are CMMI certified, so it is very important for Company XYZ. This goal of this project was to help improve the CMMI efforts at Company XYZ in 4 of the 20 distinct processes areas to attain a CMMI Maturity Level of 3. Improvement …

Design And Manufacture Of Natural Composite Canoe, Derek Baptista

Industrial and Manufacturing Engineering

Abstract

This report looks into the application and feasibility of manufacturing natural composite canoes. The main fabrics that were analyzed are flax, hemp, and jute. These were then compared to carbon fiber and fiberglass to see the difference in mechanical properties. It was found that the natural fibers have lower mechanical properties but that this could be overcome by designing a balsa wood core with ribs running up the walls. After manufacturing a hemp canoe, many lesson were learned and areas of interest were further explored. With the use of different natural fibers, these canoes can greatly reduce the carbon …

Chsr Clothing: How To Start A Small Business Clothing Line To Be Run Efficiently With Minimum Capital And Maximum Profit, Kayvon Banisalam

Industrial and Manufacturing Engineering

Executive Summary

Many clothing brands have failed because they did not design marketable products with a suitable business plan. Often times, clothing brand owners do not use the capital they possess in efficient ways. They can get caught off guard with unexpected costs and are not running the business in the most resourceful and professional way.

The goal of this project is to create a clothing brand that portrays distinctive designs to go along with an effective business model. This includes implementing decision analysis at several points of the planning phase, along with quality and cost controls. Creating quality products …