Operations Research, Systems Engineering and Industrial Engineering Commons^™

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

Antropometri Tangan Penduduk Kota Ambon Sebagai Dasar Perancangan Ergonomis, Puan Maryam Leaongso, Wilma Latuny, Aminah Soleman

National Journal of Occupational Health and Safety

The limited availability of hand anthropometric data for the Indonesian population, particularly for the residents of Ambon City, may affect the accuracy of designing ergonomic products, work equipment, and public facilities. This study aimed to measure and analyze 25 hand dimensions of the Ambon City population based on gender and age, and to compare the measurement results with national anthropometric data. This research employed a quantitative method with a descriptive design through an anthropometric approach. Data were collected directly from 200 respondents, consisting of 100 females (aged 18–40 years) and 100 males (aged 20–40 years). Data analysis was performed using …

Modeling Psychological And Demographic Predictors Of Analog Astronaut Mission Participation, Christian Yeara Herrero, Frányerson R. López Ochoa, Mackenzie Thomas, Phoebe Fleshman

Student Research Symposium (SRS)

As plans accelerate to send humans into orbit and to other celestial bodies, whether to lunar outposts, Mars bases, or commercial space stations, it becomes increasingly important to understand how to maintain healthy, cohesive, and productive crews in confined, isolated environments. A practical way to study human adaptation to these conditions is through analog astronaut missions on Earth. Although imperfect, these facilities provide the closest Earth-based simulation of space mission conditions. Currently, over ten analog research centers are operating worldwide, including NASA’s Human Exploration Research Analog (HERA) and the Crew Health and Performance Exploration Analog (CHAPEA) habitats. Selecting and recruiting …

Modeling Individual Self-Protective Behavior During Epidemics, Geonsik Yu, Michael J. Garee, Mario Ventresca, Yuehwern Yih

Faculty Publications

Protecting public health from infectious diseases requires collective action, as individual behaviors—such as vaccination and mask-wearing—directly influence disease dynamics. During the COVID-19 pandemic, unexpected public responses often undermined the effectiveness of interventions, highlighting the need to understand collective behavioral patterns and motivations to design more effective mitigation strategies. This study presents an agent-based simulation model that captures how individuals adjust self-protective behaviors based on evolving opinions about disease risk and examines how these decisions interact with external factors, such as public health interventions, to shape collective outcomes. To improve the representativeness of the simulated population, multiple datasets were integrated to …

A Systems Perspective On Workstation Ergonomic Principles And Their Application In Emergency Care Environments, James Espinosa, Alan Lucerna

Rowan-Virtua Research Day

Background: Workstation ergonomic principles are commonly included in mandatory healthcare training programs. These recommendations—monitor height relative to eye level, neutral arm positioning, and adjustable seating—derive largely from occupational ergonomics literature designed to reduce musculoskeletal strain and improve comfort during computer work. Emergency Departments (EDs), however, represent dynamic environments with shared workstations and workflow interruptions that may influence the implementation of these recommendations.

Objective: To summarize the evidence supporting commonly taught workstation ergonomic principles and frame them within a systems perspective of ED work environments.

Methods: Narrative review of occupational ergonomics guidelines, ergonomic intervention studies, and human factors literature relevant to …

Factors Affecting Pedestrian-Vehicle Conflicts: An Empirical Analysis, Christo D. Jamo

Honors Scholar Theses

The number of pedestrian deaths increased by 78% between 2009 and 2023, while other motor vehicle crash deaths increased by 13% in the same period [1]. To identify potential pedestrian safety measures, this study analyzed the effects of location-based demographics, pedestrian phasing type, and other physical infrastructure and behavior variables on the probability of pedestrian-vehicle conflicts at signalized intersections, which is a surrogate measure of crash risk. Data were collected from 55 intersections in Connecticut, and the pedestrian-vehicle interactions were classified by severity based on the Swedish Traffic Conflict Technique: undisturbed passage, potential conflict, minor conflict, or serious conflict. Because …

Techno-Enviro-Economic Analysis Of Precipitated Calcium Carbonate Production From Carbon Dioxide In Cement Industry Flue Gas And Calcium Hydroxide, Natalia Debora Panggabean, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

CCUS is a technological solution to reduce emissions from the cement industry, which is the second largest CO2-intensive industry. This study aims to analyze technical, economic, and environmental performance of Precipitated Calcium Carbonate (PCC) synthesis in cement industry flue gas. The process simulation includes the CO2 capture system from cement plant, CO2 captured used as feedstock for PCC synthesis process through its reaction with calcium hydroxide. The simulation was carried out using ASPEN Plus software. Technical analysis was performed to determine the CO2 capture efficiency and PCC synthesis efficiency. Economic analysis was conducted to calculate CO2 capture cost and production …

Feasibility Analysis Of Thermal Oxidizer To Determine Remaining Life Using Fitness- For-Service Level 3 Method, Yudhi Yudistirawan, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra, Dewi Kurnia Suci, Agung Putra Mahardhika

Journal of Materials Exploration and Findings

An aged thermal oxidizer (TOX) in the oil and gas industry necessitates a comprehensive evaluation to ensure its continued safe operation. This study presents a Remaining Life Assessment (RLA) and a Fitness for Service (FFS) evaluation for the four main components of the TOX, in accordance with API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div-1 standards. The investigation includes the determination of maximum stress and maximum temperature required to assess the operational viability of the reactor. The four components are radiant, convection, transition, and stack sections—were modeled using the finite element method (FEM). Following the geometric modeling, …

Ai Agent For Healthcare Education, Sudhanshu Tarale

Shelby Hall Graduate Research Forum Presentations

No abstract provided.

Proactive Safety Reasoning In Human-Robot Collaboration In Disassembly Through Llm-Augmented Stpa And Fmea, Morteza Jalali Alenjareghi, Fardin Ghorbani, Samira Keivanpour, Yuvin Adnarain Chinniah, Sabrina Jocelyn

Études primaires

Disassembly tasks in human–robot collaboration (HRC) environments present safety challenges due to hazardous materials, control system variability, and physically demanding operator tasks. To address these challenges, we propose an AI-augmented risk assessment framework integrating System-Theoretic Process Analysis (STPA) and Failure Mode and Effects Analysis (FMEA). This framework is implemented in four configurations: Term Frequency– Inverse Document Frequency (TF-IDF), Fine-tuned Large Language Models (LLMs), Retrieval-Augmented Generation (RAG), and RAG with a structured Knowledge Graph (KG) built from safety standards. The system supports real-time, standards-compliant safety reasoning by generating interpretable, context-specific recommendations. We evaluate these configurations across GPT-3.5 TURBO, GPT-4o, GPT-4.1, and …

A Study Of Perceptions, Readiness, Benefits, And Barriers Related To Exoskeleton Adoption In New Jersey’S Warehousing Sector, Terry Asante

Theses

The warehousing industry in New Jersey remains a vital component of the region's logistics network, employing more than 200,000 workers who routinely engage in lifting, bending, overhead reaching, and other physically demanding activities. These exposures contribute to musculoskeletal disorder (MSD) rates that exceed national averages, particularly affecting the low back and shoulders. Nationally, MSDs account for an estimated $420 billion in combined direct and indirect costs each year, underscoring the need for interventions that can effectively reduce biomechanical strain. Industrial exoskeletons have emerged as a potential solution, with prior research demonstrating reductions in muscle activation, perceived exertion, and fatigue during …

Analysis Of Leakage In Nearshore Pipelines Using Fitness For Service Method To Ensure Mechanical Integrity Based On Api-579 Level 3, Elriandri Elriandri, Dedi Priadi

Journal of Materials Exploration and Findings

The Fitness for Service (FFS) analysis is performed as a quantitative assessment to evaluate the integrity condition of a pipeline. Essentially, FFS assessment helps determine whether equipment components can operate safely despite existing deficiencies. This evaluation is carried out using the Finite Element Method (FEM). In the case of an underwater pipeline that experiences leak due to anchor pull at the flange connection, it undergoes plastic deformation and is lifted approximately 1 meter. As a mitigation step, inspection and repairs have been carried out by the company. Subsequently, modeling is performed to reconstruct the deformation process of the pipeline. Then, …

Assessment Of The Melt Quality Of A 30% Scrap Adc12 Aluminium Alloy Using The Inclusion And Fluidity Measurement Instrument (Ifmi) With Mullite Ceramic Filters, Gusti Ruri Ruri Lestari, Sandya Ananda Riswan, Muhammad Anis, Ahmad Ashari, Paramita Vidya Ayuningtyas, Bambang Suharno Prof, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The increasing demand for sustainable practices in the metal casting industry has driven the use of recycled aluminum alloys such as ADC12. However, the addition of aluminum scrap tends to increase oxide inclusions, which reduce melt fluidity and compromise casting quality. This study utilizes the Inclusion and Fluidity Measurement Instrument (IFMI), equipped with mullite ceramic filters, to assess the melt quality of ADC12 aluminum alloy containing 30% scrap. Fluidity and inclusion characteristics were evaluated at five pouring temperatures (660°C, 680°C, 700°C, 720°C, and 740°C). The results show that fluidity increased with temperature, reaching a peak of 84.6 g·s⁻¹ at 740°C, …

Equipment Criticality Analysis To Determine Asset Integrity Management System Scheme In Supporting Production Optimization Scenarios In The Aeging Field, Donny Andryanto, Donanta Dhaneswara

Journal of Materials Exploration and Findings

This research investigates the production decline and cost increase in the X&Y oil and gas fields from 2022 to 2023. Production fell by 34%, while production costs per barrel rose by 79%. To address these issues, a series of optimization processes are proposed. These aim to restructure and enhance the production facilities to reduce current production costs. The optimizations include reducing pressure at the PPP Platform in 2024. Additional steps include shutting down CPP-ORF 14” pipelines and most processes at CPP 2 Platform by 2027 to convert it into an accommodation platform. Further, the plan involves optimizing the release of …

Morphological Test Of Areca Nut Fiber Ceramic Membrane Using Scanning Electron Microscopy Energy Dispersive X-Ray Mapping Spectroscopy, Amelia Marzain, Siti Umi Kalsum, Marhadi Marhadi, Ahmad Nabil Shahab

Journal of Materials Exploration and Findings

This study investigates the potential of ceramic membranes derived from areca nut fiber as a cost-effective and environmentally sustainable material for the removal of iron (Fe) and manganese (Mn) from groundwater. Two types of membranes were fabricated: one without activation and one chemically activated using 10% sodium hydroxide (NaOH). The morphological and elemental characteristics of both membranes were analyzed using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) mapping. The concentrations of Fe and Mn before and after treatment were measured using Atomic Absorption Spectroscopy (AAS). The NaOH-activated membrane exhibited a more porous surface structure and higher oxygen content, …

Real-Time Task Scheduling Strategy For 3d Printing Cloud Platforms In Health Scenes, Jianjia He, Jian Wu, Jingran Ni, Yuning Zhang, Keng Siau

Research Collection School Of Computing and Information Systems

In health scenes, 3D Printing Cloud Platform (3DPCP) needs to cope with unpredictable fluctuations in tasks and resources, but traditional scheduling methods have problems such as incomplete consideration of factors, poor optimization, and weak dynamic adaptability, which make it difficult to meet real-time scheduling requirements. To this end, the real-time task scheduling problem of 3DPCP for health scenes is defined, a real-time task scheduling model is established, the design time of user personalized services is considered, a rescheduling scheme is designed in combination with task variations and device variations, and a scheduling strategy that incorporates dynamic mechanisms and improved multi-objective …

Multi-Period Risk-Aware Procurement Optimization Under Covid-19 Disruption, Jonathan Chase, Hoong Chuin Lau, Jinfeng Yang, Lu Liu

Research Collection School Of Computing and Information Systems

Supply chain resilience has been a topic of active research in the operations research and AI communities for several years, but the COVID-19 pandemic threw the frailties of global supply chains into sharp relief. Disruptions and delays caused by fresh outbreaks leading to lockdowns, put severe strain on supply chains in many industries. In this work we develop lockdown-resilient procurement capabilities for a global technology company. First, through analysis of lockdown data from China we develop a logarithmic regression-based lockdown prediction method to complement a supplier risk metric for conventional risks. Second, we develop a multi-period stochastic optimization model that …

Transparent Eeg Analysis: Leveraging Autoencoders, Bi-Lstms, And Shap For Improved Neurodegenerative Diseases Detection, Badr Mouazen, Ahmed Bendaouia, Omaima Bellakhdar, Khaoula Laghdaf, Aya Ennair, El Hassan Abdelwahed, Giovanni De Marco

Manufacturing & Industrial Engineering Faculty Publications

Highlights

• Novel hybrid architecture: Combined autoencoders with bidirectional LSTM networks for enhanced EEG signal classification, achieving 98% accuracy in distinguishing AD, FTD, and healthy controls.

• Explainable AI integration: Implemented SHAP (SHapley Additive exPlanations) framework to enhance model transparency and identify entropy as the most influential feature for neurodegenerative disease detection.

• Optimal temporal segmentation: Demonstrated that 5-s EEG windows with 50% overlap provide the best balance between classification accuracy and computational efficiency.

• Comprehensive feature extraction: Utilized Power Spectral Density (PSD) analysis across standard frequency bands (Delta, Theta, Alpha, Beta, Gamma) following autoencoder-based dimensionality reduction.

• Superior performance validation: Outperformed traditional machine learning …

  ---

  Go to article

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi

Journal of Materials Exploration and Findings

Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

One of the challenges in developing and archipelagic countries such as Indonesia is maintaining energy demand in rural and isolated areas due to difficulties in electrical distribution. For instance, in areas like Bawean Island, no additional electricity capacity has been introduced in the past year, leading to an unmet potential customer demand. One of the possible options is by utilizing Hybrid Renewable Energy Systems (HRES) that are integrated with existing fossil fuel-based energy systems to support the growing energy demand in the remote island. A case study in Bawean Island is conducted with the projected energy demand covers the energy …

Remaining Life Assessment And Fitness For Service Evaluation Of Aging Chemical Reactors In Polyethylene Terephthalate Resin Industry, Aditya Pahlawan Munthe, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra

Journal of Materials Exploration and Findings

Aging chemical reactors in the polyethylene terephthalate (PET) resin industry require comprehensive evaluation to ensure safe continued operation. This study conducts a remaining life assessment (RLA) and fitness-for-service (FFS) evaluation on five 30-year-old reactors, based on API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div. 1 standards. The analysis involves corrosion rate measurement, future corrosion allowance (FCA) projection, and minimum thickness verification. Among the reactors, R-120 was found to have the shortest remaining life less than 15 years. FFS assessments using three criteria Average Measured Thickness, MAWP from Point Thickness Readings, and Minimum Measured Thickness confirm that R-120 …

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor

Journal of Materials Exploration and Findings

Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO₂ emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …

A Three-Stage Matheuristic For The Blood Stochastic Inventory Routing Problem, Vincent F. Yu, Nabila Salsabila, Aldy Gunawan, Aldy Gunawan, Nurhadi Siswanto

Research Collection School Of Computing and Information Systems

This research introduces a blood distribution system under vendor-managed inventory that considers uncertain supply and demand. We present it as the Blood Stochastic Inventory Routing Problem, formulating it as a two-stage stochastic programming model. To solve this problem, this study proposes a three-stage matheuristic that combines a perturbation heuristic, Adaptive Large Neighborhood Search, and an exact approach. From historical data of Surabaya Blood Center in Indonesia, six sets of new instances are generated under different settings. Computational results show that our proposed three-stage matheuristic outperforms CPLEX and a two-stage matheuristic by gaining optimal or better solutions within a significantly shorter …

Assessment Of H2s-Induced Cracking Susceptibility In Steam Line Pipes And Weld Zones During Geothermal Well Construction, Riene Kaelamanda Pragitta, Yudha Pratesa

Journal of Materials Exploration and Findings

The susceptibility of steam line pipes, especially in the HAZ (heat-affected zone) and weldment areas, to hydrogen sulfide in the geothermal industry is crucial to understand from the early stages, particularly during construction. The combination of tensile stress from residual stresses after welding and metallurgical phase transformation makes the joint areas vulnerable to sulfide stress cracking. This condition becomes even more extreme when the equipment operates during the well stimulation phase. This research assesses the severity of H₂S-induced cracking using NACE MR0175 and ISO 15156-1 standards, focusing on the effects of pH and partial pressure of H₂S (p_{H₂S …}

Development And Validation Of A Subject-Specific Integrated Finite Element Musculoskeletal Model Of Human Trunk With Ergonomic And Clinical Applications, Farshid Ghezelbash, Amir Hossein Eskandari, Amir Jafari Bidhendi, Aboulfazl Shirazi-Adl, Christian Lariviere

Études primaires

Biomechanical modeling of the human trunk is crucial for understanding spinal mechanics and its role in ergonomics and clinical interventions. Traditional models have been limited by only considering the passive structures of the spine in finite element (FE) models or incorporating active muscular components in multi-body musculoskeletal (MS) models with an oversimplified spine. To address those limitations, we developed a subject-specific coupled FE-MS model of the trunk and explored its applications in ergonomics and surgical interventions. A parametric detailed FE model was constructed, integrated with a muscle architecture, and individualized based on existing datasets. Our comprehensive validation encompassed tissue-level responses, …

Leveraging Physiological Signal Activity And Self-Report Data To Assess Students’ Trust In “My Friendly Mind” App And Its Impact On Their Mental Health Knowledge: A Mixed-Method Phase 1 Clinical Trial Focusing On Depression And Attention Deficit Hyperactivity Disorder From Human Factors Standpoint., Yeganeh Shahsavar

Graduate Theses, Dissertations, and Problem Reports (ETD)

Mental health issues have become a significant global public health concern, especially among younger generations. The growing number of mental health challenges, combined with limited access to quality care, makes the problem even worse. Studies reveal that over 70% of individuals worldwide in need of mental health services do not receive appropriate care. Digital health technologies have the potential to enhance mental health services by making them more accessible and affordable. Despite the increasing popularity of mental health mobile applications (mHealth), there remains a lack of robust evidence of their effectiveness and the level of user trust, particularly in areas …

Reliability Of An Extended Version Of The 3m™ Eargage Tool To Assess Earcanal Size And Assist Earplug Selection, Bastien Poissenot-Arrigoni, Laurence Martin, Alessia Negrini, Djamal Berbiche, Olivier Doutres, Franck Sgard

Études primaires

Objective: Evaluate the ability of an extended version of the 3 MTM Eargage to estimate the earcanal size and assess the likelihood that a particular earplug can fit an individual’s earcanal, ultimately serving as a tool for selecting earplugs in the field. Design: Earcanal morphology, assessed through earcanal earmolds scans, is compared to earcanal size assessed with the extended eargage (EE) via box plots and Pearson linear correlations coefficients. Relations between attenuation measured on participants (for 6 different earplugs) and their earcanal size assessed with the EE are established via comparison tests. Study sample: 121 participants exposed to occupational noise …

The Effect Of Need For Cognition & Need For Affect On Human Reliance And Artificial Intelligence Interactions, Aliyah Mcgowan

Doctoral Dissertations and Master's Theses

Abstract

With the increased use of Artificial Intelligence (AI) automations in fields like medical diagnoses and mental health queries, there are concerns regarding an individual’s trust and reliance on the technology. Reliance on AI output may lead an individual to accept inaccurate or incorrect information without further analysis. Trust may influence reliance and trust formation may be a product of affective processing. This study investigated the relationship between Need for Affect (NFA), Need for Cognition (NFC), and trust and reliance on AI interactions. Participants were assessed on the NFA scale for willingness to approach or avoid emotional stimuli, the NFC …