Operations Research, Systems Engineering and Industrial Engineering Commons^™

3d Reconstruction Of Uav Sequence Image Based On Motion Structure Graph, Yuhao Wu, Xuefeng Cao, Jinchao Peng, Lianrui Xu

Journal of System Simulation

Abstract: UAV sequence image has the characteristics of high overlap and strong topological connection. Aiming at the inefficient and unstable in processing the large-scale UAV images of the existing incremental 3D reconstruction algorithm, a 3D reconstruction method based on motion structure graph is proposed. The image matching index is established by using the geolocation information and IMU data to improve the image matching efficiency, and the random motion consistency algorithm is used to calculate the relative motion; motion structure graph is used to represent the "association" between images, and closed-loop detection algorithm is used to eliminate the false edges. Under …

Intelligent Evaluation Of Simulation Training For Aerial Ammunition Technical Support, Xu Gang, Zhang Lei, Tian Lei

Journal of System Simulation

Abstract: Quantitative evaluation is an important part of the simulation training of the Aviation Ammunition technical support. In order to realize the automatic evaluation of the simulation training, intelligent evaluation technology is introduced, and a prediction model based on Sigmoid regression is proposed. On the basis of analyzing the linear relationship of the sample data of the performance indicators, a subset of the characteristic indicators is selected as the input of the prediction mathematical model. In order to avoid the gradient descent method falling into the local solution problem, the gradient descent + PSO algorithm is presented. After testing the …

Modeling And Simulation Of Quadrotor Uav With Vector Thrust Based On Backstepping, Zhou Nan, Wang Liang, Jianliang Ai

Journal of System Simulation

Abstract: Combined with characteristics of the traditional quadrotor and the quad tilt-wing UAV, a quadrotor UAV with the vector thrust (VTQ) is proposed. This UAV has the ability of vertical take-off and landing and hovering, as well as the high maneuverability of the traditional quad tilt-wing UAV. It has the ability of completing the diversified tasks by being specified the desired yaw angle and pitch angle. Control system adopts the method of the layered design. The upper layer is the position control system, the lower layer is the attitude control system, and the control laws are both designed by the …

Dynamics Modeling And Simulation Of Gait Rehabilitation Robot Based On Lie Groups And Lie Algebras Theory, Bingjing Guo, Jianhai Han, Xiangpan Li, Yan Lin

Journal of System Simulation

Abstract: A pneumatic-driven gait rehabilitation robot based on rigid mechanism and flexible driver is designed. To explore the dynamic characteristics of the human-robot harmony system constructed by patients and the exoskeleton robot, the dynamic models of human, robot and human-robot system in different gait phases are established based on Lie group and Lie algebra theory. The driving and energy characteristics of three rehabilitation training modes of passive, active assistance and resistance are analyzed. The robot joint driven moment and the human active moment are simulated to verify the Lie group and Lie algebraic modeling method and the dynamic model. It …

Simulation Optimization Of Initial Fire Evacuation Schemes For Vertical Ship Lift, Chen Shu, Xi Yan, Jianping Wang, Menghan Shang, Li Zhi

Journal of System Simulation

Abstract: In order to improve the efficiency of fire evacuation in the initial stage of the vertical ship lift and reduce the evacuation time, the structure and evacuation channel of the vertical ship lift are analyzed to identity the vertical evacuation path. The vertical evacuation time is determined by comparing the evacuation time of stairs and elevator based on the docking rules of cargos. Aiming at the shortest vertical evacuation time the evacuation time of the different docking elevations is simulated to obtain the optimal evacuation plan. The results show that, when the distance between the docking elevation and the …

Attribute Proxy Re-Encryption For Ciphertext Storage Sharing Scheme On Blockchain, Xiaohong Zhang, Lanlan Sun

Journal of System Simulation

Abstract: In order to implement the information storage sharing service safely and efficiently, a blockchain storage sharing scheme supporting the attribute proxy re-encryption and keyword retrieval is proposed. By the nodes classification and ciphertext storage separation, the anti-collusion attack is better implemented. The smart contract design of the information transaction is introduced and the information sharing parties can communicate spontaneously without the participation of the central organization. By the attribute-based proxy re-encryption algorithm, the information owner can share the information with other users without re-encrypting, uploading, and downloading information, and relieves the burden of the high-frequency access of the cloud …

Study Of Parallelized Graph Clustering Algorithm Based On Spark, Dongjiang Liu, Jianhui Li

Journal of System Simulation

Abstract: The parallelized graph clustering algorithm is researched. A new parallelized graph clustering algorithm is proposed based on Spark. As the top operation of Spark occupies a lot of memory space, a new algorithm which is used to substitute the top operation is proposed to reduce the memory consumption. By improving bottom up hierarchical clustering algorithm, the speed of the proposed algorithm is improved. A new data filtering method based on the feature of graph data is proposed. By the method, the running time and memory space comsuption is reduced greatly. The reason of the high efficiency of this filtering …

A Multi-Strategy Differential Evolution Algorithm Combined With Neighborhood Search, Can Sun, Xinyu Zhou, Mingwen Wang

Journal of System Simulation

Abstract: The difficulties of designing a multi-strategy differential evolution (DE) algorithm are how to select the mutation strategies and allocate these strategies. A multi-strategy DE algorithm combined with the neighborhood search operator is proposed. The population is divided into three subpopulations according to the fitness values, and each subpopulation employs a different mutation strategy and parameter settings to complement the search ability, to balance the exploration and exploitation ability of the whole population. The subpopulation with the best fitness values employs the neighborhood search operator to exploit possible benefit information to guide the search. Extensive experiments are carried out on …

Cae Modeling And Fault Simulation For Instantaneous Action Mechanism With High Power And Heavy Load, Teng Lin, Tang Tang, Qiaojie Li, Chen Ming

Journal of System Simulation

Abstract: A FEM simulation of a high voltage circuit breaker under actual conditions is proposed to solve the high-frequency vibration and mechanical failure problems caused by the realistic factors such as the clearance and structural elasticity of the breaker. Its operating characteristic under the high power pulse load is analyzed and the influence of the spring stiffness and dimension error on the breaker’s motion characteristics was predicted. On the basis of the dependency of the breaker’s mechanical characteristics on potential faults, critical parameters and design defects are established. The new FEM of the a high-voltage circuit breaker will replace the …

Holiday Highway Traffic Flow Prediction Method Based On Deep Learning, Xiaofeng Ji, Yicheng Ge

Journal of System Simulation

Abstract: Accurately predicting highway traffic holiday flow can provide important data for the emergency management of highway. The LSTM-SVR prediction model is established by using the theoretical framework of deep learning. The BP neural network is used to process the sample data, and the data features captured by LSTM are input into the SVR regression layer to realize the traffic flow prediction. Before and after the “Eleventh” Golden Week, the LSTM-SVR model was verified by using the traffic monitoring data of the intermodulation station in Lijiang City and the prediction results were compared with the others. It is found that …

Work In Progress: Students' Perception Of Collaborative Online International Learning, Philip Appiah-Kubi, Jennifer Nichwitz

Engineering Management and Systems Faculty Publications

Teaching and learning in the digital age harness the opportunities created by internet technologies to distribute and learn various information all over the world. This is commonly referred to as connectivism, and it values the impact of stakeholder information appraisal skills, virtual and personal communication skills [1], and the sense of cultural awareness. Collaborative Online International Learning (COIL), a type of connectivism, typically involves instructors and students from at least two geographically and culturally distinct areas who collaborate virtually on a common project for four or more weeks.

The objective is to create a culturally diverse virtual environment where students …

Embedding Computer Simulation Based Classroom Activities To Enhance The Learning Experience For Manufacturing Systems, Tzu-Liang Bill Tseng, Md Fashiar Rahman, Richard Chiou, Ivan Arturo Renteria-Marquez, Aditya Akundi, Amit J. Lopes, Jeevarathinam Senthilkumar

Manufacturing & Industrial Engineering Faculty Publications

In recent time, manufacturing environment are bracing higher end technologies to achieve high productivity, efficiency and effectiveness. Due to the adoption of the sophisticated technologies, the system is becoming very complex and stochastic. Moreover, the manufacturing system is interconnected among its different subsystems and components, which cannot be described only through the theoretical explanation. Here, computer simulation can be integrated to design and visualize the stochastic and complex system. This paper uses the advantage of simulation to describe a series classroom activity using SIMIO software, which are deployed in industrial systems simulation course in the University of Texas at El …

Solar Photovoltaic Considerations For Operational And Warfighter Support Capabilities, Dylan Martin-Abood, Douglas Dudis, Torrey J. Wagner

Faculty Publications

This work highlights the fundamental mechanisms and historical perspective for military PV technology applications and addresses the operational considerations for effectively deploying PV technology. PV materials, structures and architectures have matured into competitive and readily available energy technologies based on their levelized cost of energy (LCOE). However, enhancing warfighting capabilities requires attention to systems considerations beyond cost per watt or LCOE. While PV is impractical for fighters and bombers as it can meet less than 1% of their power requirements, there are numerous areas that could benefit from the application of PV technology. For example, installing PV arrays on all …

Investigation Of The Process Of Self-Discharge Acid Batteries, Asilbek Kiryigitovich Mamatkulov, Eldor Ikromovich Ruzmatov, Gulniso Yulchievna Zhumaeva, Furkat Ilyasovich Erkabaev

Chemical Technology, Control and Management

In this study, investigations were conducted on the process of self-discharge of acidic car batteries. The dependence of battery discharge on environmental temperature has been studied. It was found that the self-discharge of batteries increases by up to 60% over 12 months when the temperature rises from +10⁰C to +40⁰С. Replacing the tin in the electrode alloy with a more electronegative metal has been shown to reduce the self-discharge process by up to 2% per month. Because, the self-discharge of electrode batteries made of lead-calcium alloy is relatively low, the consumption of working fluid is relatively …

Using Of Parametric Nonlinear Lc-Circuits In Stabilized Transducers Of The Number Of Phases, Ivan Mikhaylovich Bedritsky, Kamila Komilovna Jurayeva, Laziz Kholboboyevich Bozorov

Chemical Technology, Control and Management

The use of nonlinear circuits of an autoparametric nature with inductive and capacitive elements for obtaining the necessary phase shifts in single-phase-three-phase converters is considered. The amplitude-phase relations between the stresses of windings located on different rods of a three-core core are obtained. The conditions under which it is possible to stabilize the stresses of the artificial phases of the Converter, as well as the phase shifts between them, are shown.

Application Of A Convolutional Neural Networks For Images Recognition, Avazjon Rakhimovich Marakhimov, Lyudmila Petrovna Varlamova

Chemical Technology, Control and Management

In the problems of image recognition, various approaches used when the image is noisy and there is a small sample of observations. The paper discusses nonparametric recognition methods and methods based on deep neural networks. This neural network allows you to collapse images, to perform downsampling as many times as necessary. Moreover, the image recognition speed is quite high, and the data dimension is reduced by using convolutional layers. One of the most important elements of the application of convolutional neural networks is training. The article gives the results of work on the application of convolutional neural networks. The work …

Remote Measurement Of Plant Biomass By Picosecond Laser Radiation, Abdushukur Abdugafurovich Mukhamedov, Abdirashid Saribaevich Rysbaev, Shamsiddin Norchaevich Ernazarov

Chemical Technology, Control and Management

A description is given of a high-speed optical recording system that uses a solid-state yttrium-aluminum garnet Nd3+ laser that generates a train of picosecond laser pulses. It is shown that by registering and temporarily scanning the secondary fluorescence radiation excited by a sequence of picosecond pulses, it is possible to remotely determine the biomass of plants based on a prematurely created bank of laboratory data.

International Higher Education Cooperation Under Conditions Of Fuzzy Terminology: Intellectual Mobility Vector, Ulugbek Vasikovich Mannanov, Igor Ivanovich Gancherenok

Chemical Technology, Control and Management

Terminology analysis of higher education internationalization process concerning joint educational programs is fulfilled. Fuzziness of used terminology is demonstrated. Joint higher education establishments development in the framework of fractal model is suggested as a strategic direction of higher education internationalization, enhancement of its quality and a concept of effective intellectual mobility.

Synergetic Control Of Nonlinear Dynamic Objects, Isomiddin Siddikov, Komil Usmanov, Noilakhon Yakubova

Chemical Technology, Control and Management

Considers the synthesis of effective control algorithms for a chemical reactor, which is the main one in the production of butyl alcohol. The method based on synergetic approach for transferring the apparatus from one capacity to another (specified) maintaining the required quality of the target component is proposed in order to ensure the stabilization of the concentration of target component at the outlet of the reactor under the conditions of uncertain disturbances affecting to an object. A mathematical model of the process based on a stoichiometric matrix taking into account the physicochemical properties of the process is developed. The control …

Research Properties Of Solving Problems Of Parametric Optimization, Dilnoz Tulkunovna Muhamediyeva

Chemical Technology, Control and Management

A model of parametric optimization with fuzzy initial information is constructed. The conditions and areas of application of the main methods of the theory of fuzzy sets in studies of parametric optimization are determined. A connection is established between the stability of parametric optimization problems and fuzzy optimization problems. An algorithm for solving problems by the method of parametric programming is developed for fuzzy given initial information. The admissible region of the parametric programming problem and the value of its objective function at each point of this region depend on the parameter t. A description of the method for solving …

Development Of A Control Device And Algorithm For Autonomous-Moving Systems, Farhod Qosimov, Ru Jiang, Dong Zhang, Mirkhalil Ismailov

Chemical Technology, Control and Management

The article is devoted to improving the control and algorithm for Autonomous moving systems. The function of the controller is to provide communication between the control computer and the actuator. The ATmega2560 microcontroller is selected as the main processor. The electrical diagram of additional devices of the microcontroller is formed. Printed circuit boards consisting of separate blocks are made on the basis of the electrical circuit. To exchange information with external systems and process the received data, a special algorithm for the microcontroller has been created. The microcontroller is programmed based on this algorithm. The analysis of the functioning of …

Extraction Of Chitosan From Died Honey Bee Apis Mellifera, Gulnora Akmalovna Ixtiyarova, Dilshoda Azamovna Hazratova, Bobur Nosir O’G’Li Umarov, Oksana Muratbayevna Seytnazarova

Chemical Technology, Control and Management

This article presents the results of obtaining biopolymers of chitin and chitosan from a new promising source- died honey bee apis mellifera. To obtain chitin, at the first stage, the protein (deproteination) and mineral (demineralization) constituents of subpestilence, i.e. put them in soluble state and removed. Demineralization was carried out with 2 M hudrochloric acid for 5 hours at room temperature. The process of deproteination is carried out by processing the crushed raw materials with 1 N sodium hudroxide solution for 1 hour at a temperature of 80⁰С. Each process was accompanied by washing the raw materials to …

Mathematical Modeling Of Thermal Processes Of Traction Asynchronous Engines For Diagnosis And Control Of Their Technical Condition, Nilufar Rabbanaqulovna Avezova, Javharbek Sulton Ugli Fayzullayev

Chemical Technology, Control and Management

Mathematical models of thermal processes of traction asynchronous motors are developed. A traction asynchronous motor is considered as a thermal system consisting of three bodies (stator winding, stator magnetic core and rotor), which take into account the heat exchange not only between the corresponding bodies, but also the heat exchange between each body and the environment. It is shown that the steady excess of the stator winding temperature of a traction asynchronous motor depends on the multiplicity of the stator winding current, the coefficient of electrical energy loss, and also on the temperature coefficient of the resistance of the winding …

Thermal Conductivity Performance Of 2d Hbn/Mos 2/Hybrid Nanostructures Used On Natural And Synthetic Esters, Jaime Taha-Tijerina, Hélio Ribeiro, Karla Aviña, Juan Manuel Martínez, Anna Paula Godoy, Josué Marciano De Oliveira Cremonezzi, Milene Adriane Luciano, Marcos Antônio Gimenes Benega, Ricardo Jorge Espanhol Andrade, Guilhermino José Macedo Fechine

Manufacturing & Industrial Engineering Faculty Publications

In this paper, the thermal conductivity behavior of synthetic and natural esters reinforced with 2D nanostructures-single hexagonal boron nitride (h-BN), single molybdenum disulfide (MoS2), and hybrid h-BN/MOS2-were studied and compared to each other. As a basis for the synthesis of nanofluids, three biodegradable insulating lubricants were used: FR3TM and VG-100 were used as natural esters and MIDEL 7131 as a synthetic ester. Two-dimensional nanosheets of h-BN, MoS2, and their hybrid nanofillers (50/50 ratio percent) were incorporated into matrix lubricants without surfactants or additives. Nanofluids were prepared at 0.01, 0.05, 0.10, 0.15, and 0.25 weight percent of filler fraction. The experimental …

Development Of Water Coning Control Design Metrics In Naturally Fractured Reservoirs, Samir Prasun

LSU Doctoral Dissertations

Naturally fractured reservoirs (NFRs) with bottom-water are known for their instant water breakthrough and severe water coning that reduces oil recovery. This is because water channels through the highly permeable fractures easily connecting the well to the aquifer bypassing the oil contained in the matrix. Remedial techniques such as producing below critical-oil rate, optimizing the well spacing and installing the downhole water sink (DWS)/ downhole water loop (DWL) technology, have already been successfully tested in single-porosity reservoirs (SPR). However, applicability of these techniques in NFRs are unknown since only a few studies have been performed on their feasibility in NFRs, …

Feasibility Of Electric Field Assisted Clogging Reduction In Cold Gas Spraying Nozzle, Hendric Tronsson

ENGS 88 Honors Thesis (AB Students)

The relatively novel cold spraying process expands its range of applications constantly. In order to continue this trend, this process still has various hurdles that need to be overcome such as clogging. Clogging within the cold gas spraying process causes porous coatings with less material properties and lower durability; a solution is needed in order to reduce the clogging and so expand the cold gas spraying applications. This study aimed to explore the feasibility of using an electric field to reduce clogging. To do so a simplified channel was used to simulate charged particle trajectory shifts under the influence of …

Stochastic Kriging For Random Simulation Metamodeling With Known Uncertainty, Wang Bo, Gea Haechang, Junqiang Bai, Yudong Zhang, Gong Jian, Weimin Zhang

Journal of System Simulation

Abstract: Uncertainty-based design has been widely carried out these years. In order to deal with the problems with large amount of calculation, a stochastic kriging for random simulation metamodeling with known uncertainty was derived, which firstly included intrinsic uncertainty in metamodel initial formulation to fully account for inputs uncertainty, and then incorporated the correlationships of intrinsic uncertainty among all observed points. Several examples with known uncertainty were also conducted, in which the proposed method shows much better variance predictions than other similar methods. Simulation results show the proposed method is a more general form of kriging, which can also …

Perfect Recovery (2,N) Color Visual Cryptography Scheme, Xianhuan Zhang, Zhengxin Fu, Ouyang Dan, Bin Yu

Journal of System Simulation

Abstract: Based on XOR operation and combining the characteristic of computer display technology, a perfect recovery (2,n) color visual cryptography scheme was proposed. Sharing algorithm of color secret image was designed on the basis of constructing row vectors${{V}_{1}},{{V}_{2}},\cdots ,{{V}_{n}}$. Through computing shares by XOR operation and dealing with recovery image, the secret image was recovered. The experimental results show that the scheme on the basis of keeping the simplicity in the reconstruction phase of visual cryptography can realize the secret image perfect recovery with low pixel expansion for price. Each participant only needs to carry a share …

Hybrid Quantum-Behaved Particle Swarm Optimization Algorithm For Solving Mould Job Shop Scheduling Problem, Zhou Kai, Wang Yan, Zhicheng Ji

Journal of System Simulation

Abstract: Quantum-behaved particle swarm optimization has better performance compared with particle swarm optimization, but it still has the problem of getting trapped into local optimum with premature convergence. According to the above problem, a hybrid algorithm included quantum-behaved particle swarm optimization and bat algorithm was proposed. On the one hand, the random walk strategy of bat algorithm was used to avoid getting into local optimum, on the other hand, the speed changing of bats’ sound was learned to transform the factor of quantum-behaved particle swarm optimization. The proposed algorithm was tested on five benchmark functions and a mould job shop …

Optimization Sensing Slot Under Transmission Collision Of Primary User And Secondary User In Cognitive Radio System, Chen Song, Nae Zheng, Wang Sheng

Journal of System Simulation

Abstract: In the cognitive radio system, that the primary user (PU) has collision with the secondary user (SU) when the secondary user (SU) was detected properly was considered. The queuing theory was introduced and the PU’s appearance pattern was described by M/M/1 model. Considering the length of the transmitting slot, detection probability and transmitting collision, the function of spectrum usage and transmitting time were established based on the PU’s appearance pattern. The existence of the maximum value of spectrum usage in the definition domain of the transmitting time was proved by theoretical derivation in some condition. The simulation results provide …