Operations Research, Systems Engineering and Industrial Engineering Commons^™

Quality Control Of Combustion Of Gaseous Fuel In Furnaces, Azamat Toirovich Rajabov

Chemical Technology, Control and Management

The issues of research and development of systems for monitoring the availability and quality of the process of fuel combustion in industrial furnaces are interpreted. The perspective of using new elements in control systems - communication sensors for the presence and quality in gas-burning installations and furnaces are shown. A method has been developed to control the optimal aeration coefficient based on the extreme of the total integral amplitude-frequency characteristic of the flame conductivity pulsations, which makes it possible to control the quality characteristics of gas-burner devices and control the ratio of the components of the combustible mixture with high …

Regular Algorithms For Adaptive Identification Of Linear Non-Stationary Systems, H.Z. Igamberdiyev, H.I. Sotvoldiev, U.F Mamirov

Chemical Technology, Control and Management

The article deals with the formation of regular algorithms for adaptive parametric spline identification of linear non-stationary systems. Analyzed the issues of constructing adaptive identification of continuous linear non-stationary systems with monotonic and sign-constant parameters. In this case, in a non-stationary system, the entire observation interval is in some way divided into sub-intervals. Identification is carried out at each of the parameter constancy intervals, while the parameter matrix is re-evaluated for the next interval. The input data of the system are determined with an error depending on the error of approximating the state of the system by splines and approximating …

Sampling-Based Algorithms For Two-Stage Stochastic Programs And Applications, Siavash Tabrizian

Operations Research and Engineering Management Theses and Dissertations

In this dissertation, we present novel sampling-based algorithms for solving two-stage stochastic programming problems. Sampling-based methods provide an efficient approach to solving large-scale stochastic programs where uncertainty is possibly defined on continuous support. When sampling-based methods are employed, the process is usually viewed in two steps - sampling and optimization. When these two steps are performed in sequence, the overall process can be computationally very expensive. In this dissertation, we utilize the framework of internal-sampling where sampling and optimization steps are performed concurrently. The dissertation comprises of two parts. In the first part, we design a new sampling technique for …

End Milling Process Modeling Using Artificial Neural Networks, Khaled Abdel-Hamid Elsayed

Archived Theses and Dissertations

No abstract provided.

Deep Multi-Modal U-Net Fusion Methodology Of Infrared And Ultrasonic Images For Porosity Detection In Additive Manufacturing, Christian E. Zamiela

Theses and Dissertations

We developed a deep fusion methodology of non-destructive (NDT) in-situ infrared and ex- situ ultrasonic images for localization of porosity detection without compromising the integrity of printed components that aims to improve the Laser-based additive manufacturing (LBAM) process. A core challenge with LBAM is that lack of fusion between successive layers of printed metal can lead to porosity and abnormalities in the printed component. We developed a sensor fusion U-Net methodology that fills the gap in fusing in-situ thermal images with ex-situ ultrasonic images by employing a U-Net Convolutional Neural Network (CNN) for feature extraction and two-dimensional object localization. We …

Effects Of The Inclusion Of Rice Hull Derived Bio-Oil On Wood Pellet Production, Tyler E. Lowe

Theses and Dissertations

Wood pellet production has become an advancing industry for the sake of reducing greenhouse emissions into the atmosphere especially, in European Union countries. Researchers and industry executives seek new methods and materials to improve the pelletization process. Rice hulls or husks has the potential to aid in wood pelletization as they possess high calorific values. This study focuses on using rice hull derived bio-oil from pyrolysis, which will also decrease ash content, as an additive to aid in the wood pelletization process. Using two groups of rice hull derived bio-oil as an additive in wood pelletization: Group 1 uses heavy …

A Dual Perspective Towards Building Resilience In Manufacturing Organizations, Steven A. Fazio

Theses and Dissertations

Modern manufacturing organizations exist in the most complex and competitive environment the world has ever known. This environment consists of demanding customers, enabling, but resource intensive Industry 4.0 technology, dynamic regulations, geopolitical perturbations, and innovative, ever-expanding global competition. Successful manufacturing organizations must excel in this environment while facing emergent disruptions generated as biproducts of complex man-made and natural systems. The research presented in this thesis provides a novel two-sided approach to the creation of resilience in the modern manufacturing organization. First, the systems engineering method is demonstrated as the qualitative framework for building literature-derived organizational resilience factors into organizational structures …

Leveraging Choice Modeling Technique For Enhancing The Cyber Resilience Of The Smart Grid, Kesava Karishma Devi Dadi

Theses and Dissertations

This research focuses on the cyber-attack of the smart grid and its retrieval to a normal state by estimating the smart grid's resilience. This study developed a theoretical model to estimate the resilience of the smart grid using choice modeling. A utility function is formulated based on various factors and sub-factors of resilience to estimate the resilience of the smart grid. Choice modeling is applied to estimate the model parameters in various fields such as marketing, energy, transportation, and health and to predict the outcome.

The Development Of Authentic Virtual Reality Scenarios To Measure Individuals’ Level Of Systems Thinking Skills And Learning Abilities, Vidanelage L. Dayarathna

Theses and Dissertations

This dissertation develops virtual reality modules to capture individuals’ learning abilities and systems thinking skills in dynamic environments. In the first chapter, an immersive queuing theory teaching module is developed using virtual reality technology. The objective of the study is to present systems engineering concepts in a more sophisticated environment and measure students learning abilities. Furthermore, the study explores the performance gaps between male and female students in manufacturing systems concepts. To investigate the gender biases toward the performance of developed VR module, three efficacy measures (simulation sickness questionnaire, systems usability scale, and presence questionnaire) and two effectiveness measures (NASA …

Testing Of Methods For Reducing Motivational Bias In Multi - Criteria Decision Analysis Problems, Chadwick Samuel Kerr

Theses and Dissertations

The idea of multi-criteria decision making has been around for quite a while. All judgement tasks are potential points of bias introduction. Each judgement task was assessed to identify common biases introduced through an extensive literature review for each task and bias. In several other studies, the distinction is made between cognitive and motivational biases. Cognitive biases are widely studied and well known with mitigations that have been validated. Motivational biases are judgements influenced by the decision maker’s desire for a specific outcome, also referred to as intentional bias, that are hard to correct and received very little testing and …

Using A Systemic Skills Model To Build An Effective 21st Century Workforce: Factors That Impact The Ability To Navigate Complex Systems, Morteza Nagahi

Theses and Dissertations

The growth of technology and the proliferation of information made modern complex systems more fragile and vulnerable. As a result, competitive advantage is no longer achieved exclusively through strategic planning but by developing an influential cadre of technical people who can efficiently manage and navigate modern complex systems. The dissertation aims to provide educators, practitioners, and organizations with a model that helps to measure individuals’ systems thinking skills, complex problem solving, personality traits, and the impacting demographic factors such as managerial and work experience, current occupation type, organizational ownership structure, and education level. The intent is to study how these …

Quantitative Characterization Of Complex Systems—An Information Theoretic Approach, Aditya Akundi, Eric Smith

Manufacturing & Industrial Engineering Faculty Publications

A significant increase in System-of-Systems (SoS) is currently observed in the social and technical domains. As a result of the increasing number of constituent system components, Systems of Systems are becoming larger and more complex. Recent research efforts have highlighted the importance of identifying innovative statistical and theoretical approaches for analyzing complex systems to better understand how they work. This paper portrays the use of an agnostic twostage examination structure for complex systems aimed towards developing an information theorybased approach to analyze complex technical and socio-technical systems. Towards the goal of characterizing system complexity with information entropy, work was carried …

Process Improvement Of Honeysuckle Biscuits And Bakery, Jevon Franklin, Kaela Bellamy, Manuel Quintal, Suheyl Polat

Senior Design Project For Engineers

Honeysuckle Biscuits and Bakery is a locally owned restaurant in Downtown Kennesaw, Georgia. Mitch and Lori Phillips, the owners, opened the restaurant in 2018. The restaurant serves breakfast (with biscuits as its specialty), lunch, coffee, desserts, and specialty cakes. As the business is beginning to outgrow itself, the project manager, Kaela Bellamy, felt it was a need to look at how to best accommodate the growing demand within the new space.

Intelligent Computer System For Enhancing Value Engineering Implementation In The Egyptian Construction Industry, Hazem M. El-Senoussi

Archived Theses and Dissertations

No abstract provided.

Genetic Algorithm For Production Scheduling, Mary El-Mallakh

Archived Theses and Dissertations

No abstract provided.

Workflow Optimization Of World Micro, Inc. Quality Department, Nicholas Ricci, Rosa Lopez Gomez, Darius Ruffin, Josh Fennell

Senior Design Project For Engineers

Our group member Nick is currently an intern at World Micro, which is an electronic components distributor for companies manufacturing a variety of commercial, aerospace and military products. When electrical components are purchased from the open market, they need to be traced back to the OEM (Original Equipment Manufacturer) or have a series of tests performed to verify that the parts are authentic and work. The current process time for World Micro’s quality testing and inspection is not efficient causing long lead times, extra work hours, and extra expenses in outsourcing services.

Design For Older Adults – Functional Limitations And Human Factors Engineering, Megumi Sato Hice

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Background: Throughout the aging process, people experience changes in functional ability and such changes can happen in physical and mental functions. As a result, older adults develop limitations in their capabilities to perform daily activities. Although many studies have done to identify functional limitations for elderly, many older adults still face negative consequences in daily living conditions due to their functional declines. One of the possible causes may be a lack of feedback or participations of elderly users in the design process. Other reason could be a lack of consideration to identify the needs for a specific task associated with …

One Step At A Time: Improving The Fidelity Of Geospatial Agent-Based Models Using Empirical Data, Amy A. Marusak

Industrial, Manufacturing, and Systems Theses - Archive

Agent-based modeling is frequently used to produce geospatial models of transportation systems. However, reducing the computational requirements of these models can require a degree of abstraction that can compromise the fidelity of the modeled environment. The purpose of the agent-based model presented in this thesis is to explore the potential of a volunteer-based crowd-shipping system for rescuing surplus meals from restaurants and delivering them to homeless shelters in Arlington, Texas. Each iteration of the model’s development has sought to improve model realism by incorporating empirical data to strengthen underlying assumptions. This thesis describes the most recent iteration, in which a …

Framework Of Big Data Analytics In Real Time For Healthcare Enterprise Performance Measurements, Ahmed Mohamed

Electronic Theses and Dissertations, 2020-2023

Healthcare organizations (HCOs) currently have many information records about their patients. Yet, they cannot make proper, faster, and more thoughtful conclusions in many cases with their information. Much of the information is structured data such as medical records, historical data, and non-clinical information. This data is stored in a central repository called the Data Warehouse (DW). DW provides querying and reporting to different groups within the healthcare organization to support their future strategic initiatives. The generated reports create metrics to measure the organization's performance for post-action plans, not for real-time decisions. Additionally, healthcare organizations seek to benefit from the semi-structured …

Understanding The Behavior Of The Covid-19 Pandemic Using Data Analytics, Mohammad Reza Davahli

Electronic Theses and Dissertations, 2020-2023

In December 2019, China announced the breakout of a new virus identified as coronavirus SARS-CoV-2 (COVID-19), which soon grew exponentially and became a global pandemic. Despite strict actions to mitigate the spread of the virus in various countries, the COVID-19 pandemic resulted in a significant loss of human life in 2020 and 2021. To better understand the pandemic, this doctoral research incorporated data analytics to evaluate the behavior and impacts of the virus. The doctoral research contributed to the scientific body of the knowledge in different ways including (1) presenting a systematic literature review of current research and topics about …

Constraint Optimal Selection Techniques (Costs) For A Class Of Linear Programming Problems, Tai-Kuan Sung

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

This dissertation describes two classes of Constraint Optimal Selection Techniques (COSTs). An algorithm of each type is developed for solving nonnegative linear programming problems. In addition, geometric interpretations of these new algorithms are given, computational results for some large-scale problems are provided, and directions for future research are discussed.

An Algorithm For Biobjective Mixed Integer Quadratic Programs, Pubudu Jayasekara Merenchige

All Dissertations

Multiobjective quadratic programs (MOQPs) are appealing since convex quadratic programs have elegant mathematical properties and model important applications. Adding mixed-integer variables extends their applicability while the resulting programs become global optimization problems. Thus, in this work, we develop a branch and bound (BB) algorithm for solving biobjective mixed-integer quadratic programs (BOMIQPs). An algorithm of this type does not exist in the literature.

The algorithm relies on five fundamental components of the BB scheme: calculating an initial set of efficient solutions with associated Pareto points, solving node problems, fathoming, branching, and set dominance. Considering the properties of the Pareto set of …

Assessment Of Leadership Styles And Lean Six Sigma Critical Success Factors In The Aerospace And Defense Industry, Corey Gellis

Electronic Theses and Dissertations, 2020-2023

The Aerospace and Defense industry has shifted into a global competitive market that is prioritizing innovative advancements in technological capabilities. Corporations are now having to further develop customer focused strategies based in adding value while reducing costs. Large manufacturing corporations often embrace continuous improvement methodologies, such as Lean Six Sigma, for process improvement. Many organizations have received minimal benefit from the methodology which may link back to leadership and culture. This research examined which styles of leadership are most effective when trying to gain the most value from Lean Six Sigma within manufacturing. The research study surveyed 112 black belt …

Change Sustainment Model (Csm) To Address Industry 4.0 In A Classified Environment, Hamilton Ervin

Electronic Theses and Dissertations, 2020-2023

Business and engineering have long intersected with each other in industry. In actuality, they are inseparable. That notion drove the thought process and actions taken to observe phenomena within a U.S. Fortune 500, Aerospace & Defense industry, Department of Defense, independent contractor. In Aerospace & Defense, the ability to implement technology freely and change to address an ever-evolving technological landscape in the world has proven to be difficult given the nature of the work performed. U.S. national security must be protected at all times, therefore information sharing guided by a "need-to-know" basis create an inability to easily implement organizational change …

Development And Application Of A Digital Twin For Chiller Plant Performance Assessment, Mihir Kale

All Theses

As the complexity of industrial equipment continues to increase, the management of the individual machines and integrated operations becomes difficult without computer tools. The availability of streaming data from manufacturing floors, plant operations, and deployed fleets can be overwhelming to analyze, although it provides opportunities to improve performance. The use of dedicated monitoring systems in the plant and field to troubleshoot machinery can be integrated within a product lifecycle management (PLM) architecture to offer greater features. PLM offers virtual processes and software tools for the design, analysis, monitoring, and support of engineering systems and products. Within this paradigm, a digital …

Airspace Integration Of New Entrants And Safety Risk Management Models, Fadjimata Issoufou Anaroua

Doctoral Dissertations and Master's Theses

In recent years, the demand for airspace access of Unmanned Aerial Systems (UAS) increased significantly and is continuously increasing for different altitude-types UAS. A similar evolution is expected from Commercial Space Operations (CSO) in the next years. These aviation/aerospace systems will need to be seamlessly integrated into the National Airspace System (NAS), at their operational altitude levels, and accounted for from all perspectives, including proactively addressing their safety hazards. This thesis captures the requirements for the new entrants’ integration, and then identifies and analyzes the safety risks added to the NAS operations by its new entrants, the future omnipresent UAS …

Predicting Zero Bin In The Semiconductor Manufacturing Industry: Machine Learning Algorithms, Yazmin Montoya

Open Access Theses & Dissertations

The semiconductor industry has faced supply chain manufacturing shortages that ultimately led to a worldwide chip shortage during the COVID-19 pandemic. These chip manufacturers use sophisticated and advanced manufacturing machinery in their fabs to manufacture chips. As experienced during the pandemic, manufacturing unavailability is often due to the lack of critical manufacturing-related spare parts. This thesis evaluates the effectiveness of machine learning algorithms to identify significant factors contributing to manufacturing part outages (i.e., zero-bin) to keep manufacturing equipment running at total capacity within the organization. We propose clustering methods to segment the data and use logistic regression, logistic lasso regression, …

A Systematic Stakeholder-Driven Framework For Empirical Characterization And Parameterization Of Human Agents For Agent-Based Modeling Of Older Adults' Transportation, Nilufer Oran Gibson

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Standard of living for health and well-being of oneself and of one’s family is a human right. Vulnerable populations are incapable of maintaining an adequate standard of living due to several reasons, such as financial constraints, racial profiling, health conditions, aging, and the combination of these reasons. To alleviate their vulnerability, the most basic needs of the vulnerable populations must be met. Transportation is the essential link to the resources to address the basic needs of the vulnerable populations. Transportation solutions tailored for vulnerable populations to meet their basic needs have multiple dimensions that require the involvement of all government …

Development Of Metaheuristic Algorithms For The Efficient Allocation Of Power Flow Control Devices, Eduardo Jose Castillo Fatule

Open Access Theses & Dissertations

Modern energy grids have become extremely complex systems, requiring more variable and active flow control. As a remedy to this, Distributed Flexible AC Transmission Systems (D-FACTS) are cost-efficient devices used to mitigate power flow congestion and integrate renewable energies. The objective of this research is then to propose an efficient multiple objective evolutionary algorithm to solve a stochastic model for D-FACTS allocation, which aims to optimize various objectives related to cost, grid health, and environmental impacts. The model was implemented on a modified RTS-96 test system, and the results show that optimally allocating D-FACTS modules using the proposed model can …

Supply Chain Optimization Of A Local Small Business From The Food-Service Industry Using Simulation Models, Aimee Montalvo

Open Access Theses & Dissertations

Various supply chain disruptions can cause revenue losses, low productivity, and damaged reputations. Some examples of such disruptions include increased supply costs, labor shortages, pandemics, natural disasters, or transportation delays. For instance, during the COVID-19 pandemic, several small and medium enterprises (SMEs) suffered greatly from labor shortages, delayed and costly supplies, and decreased demand. In this research, we present a case study of a small local business from the fast-food industry that experienced the loss of employees and delays and analyzed the increased cost of supplies. We created visualization modules with the SMEs supply chain performance measures to see the …