Operations Research, Systems Engineering and Industrial Engineering Commons^™

Establishing Employee Sense Of Belonging In A Busy Work Environment, Zoe A. Rodriguez

2024 Spring Honors Capstone Projects - Archive

This honors thesis capstone project explores the concept of an employee’s sense of belonging within a busy work environment. A department within ABC Company faces operational challenges regarding their daily tasks. The Honors contribution addresses the comparison between the busy work environment at ABC Company and existing literature to provide scholarly-supported recommendations and mitigation strategies for ABC Company. Existing literature underscores the importance of understanding contributing influences on an employee’s sense of belonging within the workplace. The honors contribution adds value by closing the information gap within companies that operate under a busy work environment and strategies of how to …

Modeling Of Multi-Period Disaster Logistics Planning In The State Of South Carolina, Emma Simon

All Theses

South Carolina is one of the most vulnerable states in the United States to the impact of hurricanes. Currently, when threatened with a natural disaster such as a hurricane, the state government makes many vital decisions based on knowledge and experience. In this study, the distribution of disaster relief commodities to meet immediate needs is analyzed through two models for the case of South Carolina to generate an optimal logistics strategy that considers the social vulnerability of affected populations. The first model is a multi-objective pre-disaster logistics model that uses a four-index formulation for the multiple trip vehicle routing problem. …

A Comprehensive Analysis Of Training Induced Heat-Related Injuries At Fort Moore, Anthony Beger

Data Science Undergraduate Honors Theses

Heat related injuries are a significant problem for the United States Armed Forces. There were over 11,000 confirmed cases of heat-related illnesses that were diagnosed at more than 230 military installations from 2018-2022. These injuries are primarily due to hyperthermia (i.e., abnormally high body temperature) resulting from extreme environmental temperatures, high humidity, medications, or excessive physical work or exercise. Fort Moore has the most heat related injuries of any installation in the U.S. Department of Defense since it is home to one of the largest U. S. Army training posts with most training involving intensive outdoor activity in high heat …

Comparing North American Professional Sports League Season Formats Using Monte Carlo Simulation, Lathan Gregg

Industrial Engineering Undergraduate Honors Theses

Each NFL, NBA, and MLB season consists of a regular season, in which teams play a set number of scheduled games and a playoff, in which qualifying teams compete for a championship. At the conclusion of each season, teams are ranked based on their performance throughout the season. This study aims to investigate the ability of each league's season format to accurately rank teams using Monte Carlo simulation. Matches between two teams are simulated by using the team’s assigned strength ranks to calculate a winning probability for each team. The winning probabilities are simulated with different skill values, dictating how …

Using Convolutional Neural Networks For Autonomous Drone Navigation, Joshua Jowers

Industrial Engineering Undergraduate Honors Theses

Unmanned Aerial Vehicles (UAVs), more commonly known as drones, serve various purposes, notably in military applications. Consequently, there arises a need for navigation methods impervious to intercepted signals [1]. Previous research has explored numerous solutions, including machine learning. This paper delves into a specific machine learning approach employing a Convolutional Neural Network (CNN) to discern image locations [2]. It elucidates the conversion of a CNN model between two machine learning libraries and presents results from multiple experiments examining parameters and factors influencing the approach's efficacy. These experiments encompass testing different data sources, image quantities, and processing pipelines to gauge their …

The Importance Of Data Preparation In A Data Science Problem, Sophia Beard

Data Science Undergraduate Honors Theses

This study is going to be based on an inventory outlier automation data science problem that is being solved to identify and prescribe inventory level outliers to help keep shelves stocked in terms of beverages. The objective of this paper will address why it is so important to understand the data that is involved in a particular data science problem and how planning ahead ensures a successful outcome in the data science world. In this data science project, Spatiotemporal Outlier Analysis for Inventory Intervention Automation, it was crucial for the team to understand, research, and visualize the data we were …

Great South Metals: Slitter Head Building Process, Nabhan Karim, Evan Swierski, Raven Morin, Patrick Kelsey, Michael Williams

Senior Design Project For Engineers

Great South Metals (GSM) operates two steel slitter machines, which take large coils of flat rolled steel and cut them into smaller strips for use in customers’ applications. Setting up the working components of each machine, called the slitter head, is a precise and arduous task. This system relies on several manually performed calculations and acute attention to detail; and thus, is prone to human error. The management at GSM commissioned our team to simplify the slitter head assembly process by creating an automated computer program and make additional recommendations to improve their operations.

The program we created is a …

The Importance Of Text Representation For Neural Networks Through Natural Language Processing Techniques, William Parsley

Data Science Undergraduate Honors Theses

Text representation is a fundamental aspect of natural language processing (NLP) when it comes to the performance of neural networks. Free-form text fields are being utilized in more and more industries. Anything from a description of an item on a web store to tracking service events to military-grade aircraft is being collected in free-form text. The goal of the thesis is to highlight best practices and discuss trends in data to prepare text for a neural network. It will demonstrate various techniques for representing free-form text in the context of neural networks, focusing on data preparation decisions, embedding techniques, and …

Examining The Impact Of Customer Rfp Characteristics On Award Compliance, Laasya Ravipati

Data Science Undergraduate Honors Theses

In the context of intermodal transportation, understanding the dynamics of award compliance holds significant importance for operational efficiency and strategic decision-making. Award compliance refers to the percentage of awarded freight volume that is realized, indicating the extent to which contractual agreements are fulfilled. This analysis delves into the intricate relationship between customer characteristics and award compliance, aiming to provide valuable insights into the variability and predictability of compliance rates. By analyzing Request for Pricing (RFP) data and primary awarded freight volumes, the study seeks to address the need for more accurate volume estimations, crucial for sales planning, revenue projections, and …

Examining Award Compliance To Inform Resource Allocation, Jacob Haarala

Data Science Undergraduate Honors Theses

This project focuses on JB Hunt Transport Inc's intermodal business unit (JBI) by focusing on the challenges associated with Published Pricing and Contractual Pricing. The primary issue revolves around the variance between the awarded freight volumes in Requests for Pricing (RFPs) and the actual volumes realized when the freight is shipped. This discrepancy poses challenges for effective sales planning, revenue goals, and optimal freight network management within JBI. Reporting tools, such as PowerBI, are currently used by JBI to provide insights into award compliance on a weekly basis. However, our goal with this project was to provide a deeper understanding …

Model-Based Comparison Of Biological Organism And Electro-Mechanical System Resiliency Strategies, Nicholas Ratycz

Mechanical Engineering Undergraduate Honors Theses

Bio-inspired design has been used by many engineers to solve difficult problems or to make manufacturing processes more efficient. Biomimetics is the study of implementing the structure or function of biological substances, materials, mechanisms, and processes onto artificial ones that mimic the original. The goal of the BIASD tool is to provide bio-inspiration for engineers by studying the fault-adaptive strategies that biological systems use, rather than just their structure or function. In this thesis, the fault adaptive strategies of both a biological example and that of a real cubesat are compared using three types of model-based system diagrams to show …

Cost-Risk Analysis Of The Ercot Region Using Modern Portfolio Theory, Megan Sickinger

Master's Theses

In this work, we study the use of modern portfolio theory in a cost-risk analysis of the Electric Reliability Council of Texas (ERCOT). Based upon the risk-return concepts of modern portfolio theory, we develop an n-asset minimization problem to create a risk-cost frontier of portfolios of technologies within the ERCOT electricity region. The levelized cost of electricity for each technology in the region is a step in evaluating the expected cost of the portfolio, and the historical data of cost factors estimate the variance of cost for each technology. In addition, there are several constraints in our minimization problem to …

Energy Optimization In Pneumatic Systems Using Ens-200 Energy Saving Trainer, Maha Guru Shankar Perumal

Open Access Theses & Dissertations

Various industries such as manufacturing and assembly, the automotive sector, printing and paper handling, packaging, aerospace, etc., widely use pneumatic systems for a variety of operations. Enterprises use pneumatic systems for cost-effectiveness, reliability, and simplicity. However, they also have certain inefficiencies, leading to high operating costs and reduced efficiency in various applications. The focus of this research is on energy optimization in pneumatic systems to improve efficiency in industrial applications, minimize energy waste, and reduce operational costs. The best practices for enhancing energy efficiency in pneumatic systems were proper system design, pressure regulation, leak detection and repair, energy-efficient components, and …

Investigating Potential Improvements To Mbse Software To Support Dodaf, Jennifer Marie Kimpson

Theses and Dissertations

The integration of models created through model-based systems engineering methods with DoDAF is not a new concept. By creating DoDAF-aligned models, DoD program managers are following DoD guidelines to hopefully achieve more effective communication with stakeholders and improve efficiency of their programs. With the use of MBSE tools to create these models, DoD program managers are able to take further advantage of the benefits of MBSE methods. However, even with the use of MBSE tools, there continue to be issues throughout DoD programs. The literature has shown that a continuous improvement approach regarding the use of MBSE tools with DoDAF …

Rsm For The Optimization Of Selective Laser Melting Process Parameters For Manufacturing Initial Layers Of Horizontal Overhang Structures, Prince Yaw Asamani

Theses and Dissertations

While prevalent in 3D printed objects, overhang features are difficult to print with selective laser melting due to the limitation of a purely vertical laser. To address this issue, overhang features are typically built on temporary supports, which are removed following printing. However, this results in wasted material and longer production time. Several authors have studied printing overhangs without support structures. However, there has not been a systematic approach to studying the effect of multiple process parameters on the quality of a printed overhang. This thesis investigates the effect of laser power, scanning speed, and hatch distance on the surface …

A Dedicated Lane Analysis For Supply Chain Resilience In The U.S.-Mexico Border: Cost-Comparison And Simulation Models, Carlo A. Zorola Gonzalez

Theses and Dissertations

Supply chains have been actively developing and implementing strategies to enhance resilience in response to various disruptive events like the COVID-19 pandemic, hurricanes, geopolitical tensions, and climate change. These strategies aim to address demand and supply imbalances, logistical challenges, and policy restrictions encountered in transborder commerce. One area significantly impacted by such disruptions is cross-border trade between the US and Mexico. Understanding these strategies is crucial for achieving supply chain resilience, defined as the ability of a supply chain to quickly adapt to sudden disruptions without affecting the flow of goods. In both the US-Mexico and US-Canada borders …

Application Of An Information Gain Model In A Motor Learning Task: An Application In A Laparoscopic Surgical Skills Task, Matthew Ball

All Theses

Psychomotor skills are comprised of physical movements and mental adaptations of movements to complete a task, generally using complex tools or components. Laparoscopic surgery training tasks are a prime example of tasks requiring psychomotor skills due to their demand for both fine hand movements and constant mental adaptation to the changing environment of the human body. A typical evaluation of these skills can be accomplished using learning curves, a graphical representation of skill growth in which a performance metric is plotted over a time experience metric. Previously, in the literature, several learning curves have been generated from the performance within …

A Transdisicplinary, Survivor-Centered Approach For Creating A System Dynamics Model Of Closed-Buyer Sex Trafficking Networks, Kemonte Yow

All Theses

One of the largest drivers of sex trafficking operations is the demand for commercial sex. To date, research from a quantitative side typically focuses on understanding how to best identify and remove victims from their trafficking situation and then support their healing and recovery. This may be because this is where data exists (in limited forms) to support quantitative modeling. This thesis broadens that scope to understand how demand for commercial sex impacts trafficking operations. In particular, this research implemented a transdisciplinary, survivor-centered approach to build a system dynamics model of a closed-buyer sex trafficking network, which is a network …

Depression And Anxiety: Investigating The Impacts Of Scheduling On The Mental Health Of Healthcare Workers During The Covid-19 Pandemic, Christofer Gonzaga

All Theses

Depression is a growing problem in the United States and has ballooned into a globally recognized mental health issue that affects shift workers in various fields (Lee et al., 2017). Rates of depression and anxiety have been shown to be substantially increasing and the COVID-19 pandemic amplified this prevalence of depression and anxiety. In the United States, the prevalence of depression symptoms was more than 3- fold higher during COVID-19 compared to before the pandemic (Ettman et al., 2020). The delivery of healthcare services is an ongoing and dynamic process, requiring clinicians to work in various shifts to ensure the …

A Design Science And Implementation Framework For Studying Interruptions And Its Application In A Dental Clinic., Carsten Ziegler

Electronic Theses and Dissertations

Interruptions during dental treatment are frequent, and often have detrimental effects on quality of care, patient safety and processing times, and have an impact on provider satisfaction and performance. Interruptions can significantly increase the cognitive load on dental providers, making it hard for them to concentrate on complex procedures. Frequent interruptions also disrupt the workflow in general, leading to delays in treatment, which can reduce the overall throughput of a clinic. Unfortunately, there is no comprehensive approach to collectively (i) analyze interruptions in dental healthcare, (ii) design an intervention, and (iii) implement and sustain it. This research proposes a comprehensive …

An Adaptive Large Neighborhood Search For The Multi-Vehicle Profitable Tour Problem With Flexible Compartments And Mandatory Customers, Vincent F. Yu, Nabila Yuraisyah Salsabila, Aldy Gunawan, Anggun Nurfitriani Handoko

Research Collection School Of Computing and Information Systems

The home-refill delivery system is a business model that addresses the concerns of plastic waste and its impact on the environment. It allows customers to pick up their household goods at their doorsteps and refill them into their own containers. However, the difficulty in accessing customers’ locations and product consolidations are undeniable challenges. To overcome these issues, we introduce a new variant of the Profitable Tour Problem, named the multi-vehicle profitable tour problem with flexible compartments and mandatory customers (MVPTPFC-MC). The objective is to maximize the difference between the total collected profit and the traveling cost. We model the proposed …

Denoising Diffusion Probabilistic Models Based Accelerated Mri, Alexander Francis Bugielski

Theses and Dissertations

Magnetic Resonance Imaging (MRI) is a cornerstone in obtaining intricate visualizations of anatomy and physiological processes within the human body. However, its extensive scan duration not only causes patient discomfort but also increases the likelihood of motion-induced artifacts in the images. To address such a challenge, this study investigates deep neural network models for reconstructing high-resolution MRI images from noisy and significantly undersampled data in a supervised learning manner. Specifically, it compares three models: a conventional U-Net, a self-attentive U-Net, and an innovative probabilistic diffusion model that builds upon the self-attentive U-Net architecture. These models are evaluated on their ability …

Modernization Of Water Flow Measurement In Open Irrigation Systems Using The Slope-Area Method, R.M. Aliev, Djalilov Anvar

Chemical Technology, Control and Management

This article describes two methods for determining water flow in open irrigation systems: “speed - area” and “slope - area”. The authors considered the problem of its modernization using the existing method for determining water flow “slope - area” in open irrigation systems. The essence of the issue is the remote transfer of parameters necessary for calculating water flow in open irrigation systems and improving the means of their processing. In scientific studies conducted by the authors, the required hydraulic parameters were studied using the “slope - area” and “speed - area” water flow methods. Based on experimentally obtained data, …

Examining Mechanical Property Differences In Concrete With Natural And Synthetic Fiber Additives, Walid Fouad Edris, Sammy Elbialy, Ayman El-Zohairy, Ashraf Mohamed Soliman

Faculty Publications

The rapid growth of Natural Fiber Laminate (NFL) innovation is a direct response to environmental challenges, positioning these materials as superior alternatives to synthetic fiber composites. This paper delved into the outcomes of an extensive experimental study investigating the influence of sisal fiber (SLF), banana fiber (BF), and glass fiber (GF) on the mechanical and microstructural characteristics of concrete. The water absorption curves were established for sisal fiber concrete (SLFC), banana fiber concrete (BFC), and glass fiber concrete (GFC). Furthermore, Scanning Electron Microscope (SEM) observations were conducted to perform microanalysis and failure analysis of the tested specimens. The results revealed …

Sol-Gel Synthesis And Microstructure Characterization Of Nio-Tio2 Semiconductor, Godlisten N. Shao

Tanzania Journal of Engineering and Technology (TJET)

NiO-TiO2 is a fascinating p-n semiconducting binary metal oxide with unique electronic and optical properties. The NiO-TiO2 has been synthesized using complicated preparation methods and expensive precursors that hamper their large-scale production. The present study reports the preparation of NiO-TiO2 semiconductor with improved physicochemical properties. NiO-TiO2 samples were prepared through one-pot sol-gel synthesis process followed by sintering of the as-synthesized materials at temperatures ranging from 600 to 1000 °C. The role of thermal treatment and NiO content on the microstructures was exquisitely studied. The microstructure of the NiO-TiO2 samples was examined by Raman spectroscopy, XRD, XRF, SEM-EDAX, high resolution TEM, …

Results Of Experimental Study Of Solar Collector Efficiency, Shakhnoza Sultanova, Ajargul Mambetsheripova, Jasur Safarov

Chemical Technology, Control and Management

The article considers the influence of ambient temperature on the drying efficiency depending on the incident solar radiation, changes in the average temperature of the absorber plate depending on the absorbed power, as well as the thermal efficiency of the collector at significant values of coolant flow.

Dynamic Characteristics Of Magnetoelectric Linear Actuators Of Control Systems, Мakhmudjon Muxamedovich Аbdullayev, Rasul Ernazar Ogli Abdiev

Chemical Technology, Control and Management

This paper presents the results of studies carried out on magnetoelectric drives that carry out linear movement, models of drives are built and, on their basis, studies of the main indicators associated with the movement of a linear armature are carried out, such as: speed of movement, acceleration, current values, voltage and traction force of the armature. Also presented are the results of a study of magnetoelectric linear motion drives based on an analysis of graphs of their dynamic characteristics.

Improving Technology For Producing Complex Fertilizer From Low-Grade Phosphorites Of The Central Kyzylkum, A.Zh. Allamuratova, A.U. Erkaev, A.M. Reimov, Saparbay Kazakhbaev, Dilshodbek Kurbiyazov

Chemical Technology, Control and Management

The methods of nitric acid processing of phosphate raw materials are analyzed. A technology has been developed for the nitric acid processing of phosphate raw materials into nitrogen-phosphorus fertilizer with the implementation of the process in a condensed pulp by adding sulfuric acid. A technology for producing complex fertilizers with a wide range of N:P₂O₅:K₂O ratios with improved physico-chemical parameters due to the introduction of various potassium salts into the process is proposed.

Synthesis Of Local Control Systems For Underwater Units Cleaning Bottom Sediments In Reservoirs, Yuriy Gennadiyevich Shipulin, Zebiniso Akmalovna Zayniddinova

Chemical Technology, Control and Management

The article discusses the issues of synthesizing local control systems for underwater units for cleaning bottom sediments in reservoirs. It is shown that the protection and rational use of natural reservoirs and the fight against their premature siltation is becoming an urgent task.

It is proposed to use small-sized underwater units, consisting of information and measuring devices, to carry out search work for cleaning bottom sediments under water; control systems; actuators and means of communication with humans.

It is shown that the task of controlling the loading of an underwater unit (UU) requires maintaining optimal performance while simultaneously taking into …

Algorithms For Structural Synthesis Of Control Systems For Dynamic Objects Under Conditions Of Unmeasurable Disturbances, Husan Zakirovich Igamberdiev, Uktam Farkhodovich Mamirov, Bunyod Mamurjon Ugli Buronov

Chemical Technology, Control and Management

The paper talks about ways to use inverse dynamic models to structure a control system for moving objects when disturbances are not measured. To solve the main problems that arise when implementing the inverse dynamic model method, methods for synthesizing inverse systems with given dynamic characteristics are used. The solution to this problem is obtained based on the theory that dynamic observers are invariant to unmeasured input influences. We broke down the matrix operator on the right into elementary orthogonal rotation matrices and on the left into permutation matrices to get a stable answer to the equation of the current …