Open Access. Powered by Scholars. Published by Universities.®

Operations Research, Systems Engineering and Industrial Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1171 - 1200 of 13937

Full-Text Articles in Operations Research, Systems Engineering and Industrial Engineering

Improving The Availability Of Aluminium Sheath Extrusion Machines In The Cable Industry, Jirathana Vasinyont Jan 2025

Improving The Availability Of Aluminium Sheath Extrusion Machines In The Cable Industry, Jirathana Vasinyont

Chulalongkorn University Theses and Dissertations (Chula ETD)

Aluminium sheath extrusion machines (AL Seamless) play a critical role in the production of high-voltage cables, ensuring the integrity and quality of electrical transmission infrastructure. However, after commissioning such machines at PD Company was fraught with challenges, including frequent breakdowns, limited machine availability, and production inefficiencies. The underlying issues stemmed from inadequate standard operating procedures (SOPs), insufficient knowledge transfer during commissioning, and suboptimal maintenance practices. To address these challenges, this research applied structured methodologies, including Failure Mode and Effects Analysis (FMEA) to identify critical failure points and root causes, and Total Productive Maintenance (TPM) to improve operational reliability. Knowledge transfer …

Go to article

Risk Management For Irrigation Water Pumping Project In Myin Gyan District, Myanmar, Ye Lin Aung Jan 2025

Risk Management For Irrigation Water Pumping Project In Myin Gyan District, Myanmar, Ye Lin Aung

Chulalongkorn University Theses and Dissertations (Chula ETD)

This study evaluates risk and performance management in the Si Mee Khon irrigation water pumping project in Myin Gyan District, Myanmar. Although intended to supply irrigation to 5,000 acres of farmland, the project has fallen short of planned targets. By Q3 2025, 53.62% of the budget had been spent while only 44% of the intended coverage had been completed, signalling significant delays and cost inefficiencies. The research identifies and prioritises key risks, assesses their effects on schedule and cost performance, and proposes mitigation strategies. A mixed-method approach was used, combining interviews with twenty MOALI officials and quantitative analysis based on …

Go to article

Reliability Of An Extended Version Of The 3m™ Eargage Tool To Assess Earcanal Size And Assist Earplug Selection, Bastien Poissenot-Arrigoni, Laurence Martin, Alessia Negrini, Djamal Berbiche, Olivier Doutres, Franck Sgard Jan 2025

Reliability Of An Extended Version Of The 3m™ Eargage Tool To Assess Earcanal Size And Assist Earplug Selection, Bastien Poissenot-Arrigoni, Laurence Martin, Alessia Negrini, Djamal Berbiche, Olivier Doutres, Franck Sgard

Études primaires

Objective: Evaluate the ability of an extended version of the 3 MTM Eargage to estimate the earcanal size and assess the likelihood that a particular earplug can fit an individual’s earcanal, ultimately serving as a tool for selecting earplugs in the field. Design: Earcanal morphology, assessed through earcanal earmolds scans, is compared to earcanal size assessed with the extended eargage (EE) via box plots and Pearson linear correlations coefficients. Relations between attenuation measured on participants (for 6 different earplugs) and their earcanal size assessed with the EE are established via comparison tests. Study sample: 121 participants exposed to occupational noise …

Go to article

การวิเคราะห์ความสามารถในการขับขี่และพฤติกรรมจากความเหนื่อยล้าโดยใช้สัญญาณภาพ, ภาสวิชญ์ บุญนุช Jan 2025

การวิเคราะห์ความสามารถในการขับขี่และพฤติกรรมจากความเหนื่อยล้าโดยใช้สัญญาณภาพ, ภาสวิชญ์ บุญนุช

Chulalongkorn University Theses and Dissertations (Chula ETD)

อาการเหนื่อยล้ายังคงเป็นประเด็นด้านความปลอดภัยที่สำคัญในกลุ่มผู้ขับรถบรรทุก ซึ่งมักจะส่งผลให้ระดับความสามารถในการขับขี่ลดลงและเพิ่มความเสี่ยงต่อการเกิดอุบัติเหตุ การศึกษาในครั้งนี้นำเสนอแนวทางการใช้แบบจำลองการเรียนรู้ของเครื่อง (Machine Learning) โดยมีการรวมข้อมูลเหตุการณ์การเกิดพฤติกรรมของผู้ขับขี่ที่ตรวจจับได้จากระบบ AI Camera และข้อมูลด้านประชากรศาสตร์และลักษณะการทำงาน เพื่อทำนายระดับความสามารถในการขับขี่ที่ลดลงที่มีสาเหตุมาจากอาการเหนื่อยล้า โดยทำการศึกษาจากข้อมูลจำนวน 600 วัน ซึ่งประกอบไปด้วยผู้ขับขี่จำนวน 105 คน โดยแบ่งระดับความสามารถในการขับขี่ออกเป็น 3 ระดับ ได้แก่ ความสามารถปกติ ความสามารถลดลง และความสามารถที่มีความเสี่ยงสูง โดยสังเกตจากพฤติกรรมการตอบสนองขณะขับขี่ การวิเคราะห์จะพิจารณาการรวมข้อมูลด้านประชากรศาสตร์และลักษณะการทำงาน วิธีการพัฒนาเกณฑ์ในการระบุระดับความสามารถในการขับขี่ กรอบเวลาในการสังเกตอาการเหนื่อยล้า และคุณภาพของข้อมูลเชิงพฤติกรรม โดยใช้แบบจำลองการเรียนรู้ของเครื่องภายใต้กรอบเวลาในการสังเกตที่แตกต่างกันก่อนเกิดที่ระดับความสามารถในการขับขี่ลดลง ผลการศึกษาแสดงให้เห็นว่าปัจจัยด้านประชากรศาสตร์และปัจจัยที่แสดงลักษณะการทำงานช่วยเพิ่มความแม่นยำในการทำนาย โดยสำหรับการศึกษานี้ แบบจำลองชนิด LightGBM ให้ผลการทำนายที่ดีที่สุดที่ค่าความแม่นยำ 90% ภายใต้เงื่อนไขเหตุการณ์ที่ผ่านการตรวจสอบและใช้กรอบเวลา 8 นาที ซึ่งสะท้อนให้เห็นถึงประโยชน์ของการใช้กรอบเวลาสั้นในการตรวจจับอาการเหนื่อยล้า การวิเคราะห์ความสำคัญของแต่ละปัจจัย (Feature Importance) พบว่า การหาว การปฏิบัติงานต่อเนื่องเกิน 4 ชม. และการหลับตา เป็นตัวบ่งชี้ทางพฤติกรรมที่สำคัญที่สุดตามลำดับ ในขณะที่อายุ การยกของก่อนขับรถ ช่วงเวลาในการทำงาน ประสบการณ์ในการทำงาน เป็นปัจจัยด้านประชากรศาสตร์และการทำงานที่มีอิทธิพลต่อการลดลงของระดับความสามารถในการขับขี่ ผลการศึกษานี้ชี้ให้เห็นถึงความสำคัญของการรวมข้อมูลเหตุการณ์ที่ผ่านการตรวจสอบเข้ากับลักษณะเฉพาะของผู้ขับขี่ และกรอบเวลาในการสังเกตอาการเหนื่อยล้าที่เหมาะสม เพื่อใช้ในการประเมินระดับความสามารถที่ลดลงที่มีสาเหตุจากอาการเหนื่อยล้าได้อย่างมีประสิทธิภาพในงานขนส่ง

Go to article

การเปรียบเทียบขนาดของรอยฝ่าเท้าที่ได้จากเครื่องพิมพ์รอยฝ่าเท้า 3 มิติ แบบพกพาและโฟมพิมพ์เท้า, วรัญญา รัตนสุมาวงศ์ Jan 2025

การเปรียบเทียบขนาดของรอยฝ่าเท้าที่ได้จากเครื่องพิมพ์รอยฝ่าเท้า 3 มิติ แบบพกพาและโฟมพิมพ์เท้า, วรัญญา รัตนสุมาวงศ์

Chulalongkorn University Theses and Dissertations (Chula ETD)

ความแม่นยำของเครื่องมือใหม่ที่ถูกพัฒนามาใช้ทดแทนเครื่องมือเดิม เป็นปัจจัยสำคัญต่อความน่าเชื่อถือ ได้มีการพัฒนาเครื่องพิมพ์รอยฝ่าเท้า 3 มิติแบบพกพาเพื่อทดแทนการใช้โฟมพิมพ์เท้า และใช้ iPhone 12 mini เป็นอุปกรณ์สแกนรอยฝ่าเท้าเพื่อทดแทนเครื่อง 3D scanner เพื่อประเมินให้เห็นว่าสามารถนำเครื่องพิมพ์รอยฝ่าเท้า 3 มิติแบบพกพาและ iPhone 12 mini มาใช้ทดแทนได้ จึงได้มีการออกแบบการทดลองแบบ Randomized Complete Block Design (RCBD) โดยศึกษาปัจจัยของประเภทเครื่องมือที่ใช้พิมพ์รอยฝ่าเท้า ได้แก่ โฟมพิมพ์เท้า และ เครื่องพิมพ์รอยฝ่าเท้า 3 มิติ แบบพกพา และประเภทเครื่องสแกน 3 มิติ ได้แก่ 3D scanner และ iPhone 12 mini การทดสอบได้เก็บข้อมูลเท้า 18 ข้าง จากผู้เข้าร่วมวิจัย 9 คน โดยพิมพ์ลงบนเครื่องพิมพ์รอยฝ่าเท้า 3 มิติ แบบพกพาและโฟมพิมพ์เท้า และทำซ้ำ 3 ครั้ง รอยฝ่าเท้าที่ได้ถูกสร้างรูปร่างรอยฝ่าเท้าดิจิตอลด้วย iPhone 12 mini และ 3D scanner เพื่อเก็บข้อมูลตัวชี้วัดทั้ง 7 ตัว ได้แก่ ความกว้างรอยฝ่าเท้า ความยาวรอยฝ่าเท้า ความสูงรอยฝ่าเท้าในพื้นที่บริเวณอุ้งเท้า 4 ตำแหน่ง และความสูง Metatarsal head ที่ 3 จากผลการวิเคราะห์ทางสถิติแบบ Randomized Complete Block Design (RCBD) ที่ระดับความเชื่อมั่น 95% พบว่าตัวชี้วัดทั้ง 7 ตัว ของเครื่องพิมพ์รอยฝ่าเท้า 3 มิติ แบบพกพากับโฟมพิมพ์เท้าไม่มีความแตกต่างกันอย่างมีนัยสำคัญ และการใช้ iPhone 12 กับ 3D scanner ไม่มีความแตกต่างกันอย่างมีนัยสำคัญเช่นกัน ผลการวิจัยสรุปได้ว่า …

Go to article

Physics-Informed Deep Learning With Kalman Filter Mixture For Traffic State Prediction, Niharika Deshpande, Hyoshin (John) Park Jan 2025

Physics-Informed Deep Learning With Kalman Filter Mixture For Traffic State Prediction, Niharika Deshpande, Hyoshin (John) Park

Engineering Management & Systems Engineering Faculty Publications

Accurate traffic forecasting is crucial for understanding and managing congestion for efficient transportation planning. However, conventional approaches often neglect epistemic uncertainty, which arises from incomplete knowledge across different spatiotemporal scales. This study addresses this challenge by introducing a novel methodology to establish dynamic spatiotemporal correlations that captures the unobserved heterogeneity in travel time through distinct peaks in probability density functions, guided by physics-based principles. We propose an innovative approach to modifying both prediction and correction steps of the Kalman Filter (KF) algorithm by leveraging established spatiotemporal correlations. Central to our approach is the development of a novel deep learning model …

Go to article

Zero Trust Architecture As A Risk Countermeasure In Small-Medium Enterprises And Advanced Technology Systems, Ahmed M. Abdelmagid, Rafael Diaz Jan 2025

Zero Trust Architecture As A Risk Countermeasure In Small-Medium Enterprises And Advanced Technology Systems, Ahmed M. Abdelmagid, Rafael Diaz

Engineering Management & Systems Engineering Faculty Publications

The growing sophistication of cyberattacks exposes small- and medium-sized businesses (SMBs) to a widening range of security risks. As these threats evolve in complexity, the need for advanced security measures becomes increasingly pressing. This necessitates a proactive approach to defending against potential cyber intrusions. Emerging technologies, such as blockchain, artificial intelligence, and Zero Trust security framework, offer crucial tools for strengthening the digital infrastructure of SMBs. The Zero Trust architecture (ZTA) holds significant promise as a critical strategy for protecting SMBs. While existing literature explores the implementation of ZTA in various business settings, discussions specifically addressing the financial, human resource, …

Go to article

Sampling Balanced High-Quality Data To Train An Automatic Mesh Generator, Jie Pan, Jingwei Huang, Gengdong Cheng, Yong Zeng Jan 2025

Sampling Balanced High-Quality Data To Train An Automatic Mesh Generator, Jie Pan, Jingwei Huang, Gengdong Cheng, Yong Zeng

Engineering Management & Systems Engineering Faculty Publications

In real-world scenarios, high-quality data are often scarce and imbalanced, yet it is essential for the optimal performance of data-driven algorithmic models. Data synthesis methods are commonly used to address this issue; however, they typically rely heavily on the original dataset, which limits their ability to significantly improve performance. This article presents a quality function-based method for directly generating high-quality data and applies it to a mesh generation algorithm to demonstrate its efficiency and effectiveness. The proposed approach samples input-output pairs of the algorithm based on their feature spaces, selects high-quality samples using a defined quality function that evaluates the …

Go to article

Effect Of Alkyd And Polyester Resin Compositions On Corrosion Resistance, Blistering, And Adhesion In Utilization Of Oily Sludge As Anti-Rust Coating Material, Gerets Land Kakalang, Yohanes David Kristianto, Johny Wahyuadi Mudaryoto Dec 2024

Effect Of Alkyd And Polyester Resin Compositions On Corrosion Resistance, Blistering, And Adhesion In Utilization Of Oily Sludge As Anti-Rust Coating Material, Gerets Land Kakalang, Yohanes David Kristianto, Johny Wahyuadi Mudaryoto

Journal of Materials Exploration and Findings

Oil sludge is a waste derived from upstream and downstream activities of the oil and gas industry which is estimated at 10,000 tonnes generated from all PERTAMINA downstream activities spread across various fields, processing units and depots throughout Indonesia. Oil sludge has the same characteristics as asphalt, where asphalt in previous studies can be used as an anti-rust coating, so that the handling of oily sludge can be topped up by reusing and having its own added value. The purpose of this research is to utilise waste oily sludge as an alternative anti-rust coating material and compare alkyd resin and …

Go to article

Inspection Program Effectiveness Key Performance Indicator For Pressurized Static Equipment Integrity At Offshore Platform, Teuku Ahmad Haekal, Johny Wahyuadi Soedarsono, Badrul Munir, Muhammad Yudi Masduky Sholihin Dec 2024

Inspection Program Effectiveness Key Performance Indicator For Pressurized Static Equipment Integrity At Offshore Platform, Teuku Ahmad Haekal, Johny Wahyuadi Soedarsono, Badrul Munir, Muhammad Yudi Masduky Sholihin

Journal of Materials Exploration and Findings

One of the key challenges in asset integrity management system at offshore platform is the lack of visibility regarding performance issues and program effectiveness. Without proper performance measurement systems, it becomes difficult to address positive or negative trends promptly and for management to stay informed about the status and the impact of the inspection program. Therefore, Key Performance Indicator (KPI) is needed to measure inspection program effectiveness to prevent undesirable equipment failures that could lead to Loss of Primary Containment (LOPC) or Process Safety Event (PSE). The developed KPI is the ratio of the number of non-leak inspection findings with …

Go to article

Comparative Analysis Of Risk-Based And Time-Based Inspection Application In Hydrocarbon And Chemical Industries: A Review, Azizar Azizar, Nofrijon Sofyan Dec 2024

Comparative Analysis Of Risk-Based And Time-Based Inspection Application In Hydrocarbon And Chemical Industries: A Review, Azizar Azizar, Nofrijon Sofyan

Journal of Materials Exploration and Findings

RBI and TBI strategies are comparatively reviewed in terms of their contribution to maintaining asset integrity for asset owners in the hydrocarbon and chemical industries. The objective is to assess various methods on a cost-efficient and risk-managed operational safety basis. It utilizes common industry standards such as API 580 for RBI, and API 510, API 570, and API 653 for TBI, and also case studies and literature analysis. The analysis of data was conducted to examine how each approach deals with inspection planning and decision-making. They suggest that RBI's risk-based prioritization strategy leads to more effective management of high-risk assets, …

Go to article

Exploration Of The Iterative Design Process: Integrating A Requirements Matrix And Hazard Analysis Toolsexploration Of The Iterative Design Process: Integrating A Requirements Matrix And Hazard Analysis Tools, Blaine Edlefsen Dec 2024

Exploration Of The Iterative Design Process: Integrating A Requirements Matrix And Hazard Analysis Toolsexploration Of The Iterative Design Process: Integrating A Requirements Matrix And Hazard Analysis Tools, Blaine Edlefsen

Theses

The iterative design process is applied to multiple industry sectors from software development to product manufacturing. The cyclical approach integrates the steps of design, prototyping, and testing toward the realization of a user's specified needs. The use of a requirements traceability matrix and hazard analysis documentation that supports the definition of the iterative design process is explored. These design project management tools are applied to a case study involving workholding design for a Wire Electrical Discharge Machining (Wire-EDM) manufacturing process. This industry-relevant case study is conducted in collaboration with New Jersey Precision Technologies, Incorporated (NJPT). The design requirements involve both …

Go to article

Forecasting Air Pollution Driven By Vehicle Growth, Public Transport, Industry, And Household Waste, Chandra Harjono, Ludy Gianto, Rachmattullah Sidik, Dyah Lestari Widaningrum Dec 2024

Forecasting Air Pollution Driven By Vehicle Growth, Public Transport, Industry, And Household Waste, Chandra Harjono, Ludy Gianto, Rachmattullah Sidik, Dyah Lestari Widaningrum

Journal of Environmental Science and Sustainable Development

Jakarta, Indonesia's bustling capital, is grappling with escalating air pollution levels attributed to a confluence of socio-economic and infrastructural factors. This study employs Vensim modelling to project PM2.5 pollution trends through 2040, analysing the dynamic interplay among major contributors: increased vehicular emissions, industrial activities, public transportation deficiencies, and waste management inefficiencies. Materials and Methods: The method that will be used in this air pollution analysis is to integrate empirical data spanning three years to construct a predictive model underpinned by a robust causal loop diagram that elucidates the relationships between system variables and air quality. The results of this paper …

Go to article

Development Strategies For Grid-Connected Utility-Scale Solar Photovoltaic To Increase Renewable Energy Penetration, Surya Budi Ariyadi, Widodo W Purwanto Dec 2024

Development Strategies For Grid-Connected Utility-Scale Solar Photovoltaic To Increase Renewable Energy Penetration, Surya Budi Ariyadi, Widodo W Purwanto

CSID Journal of Infrastructure Development

The government of Indonesia has launched programs to decarbonize its power systems by replacing fossil fuel-based plants with renewable energy. Solar photovoltaic (PV) deployment faces economic and technical barriers despite abundant solar irradiance. This study evaluates techno-economic strategies for 10 MW grid-connected solar PV systems, comparing two scenarios: without Battery Energy Storage System (BESS) and with BESS to reduce grid reliance. Key interventions were analyzed for their economic impacts, including tariff adjustments, carbon tax implementation, and competitive auction schemes. The results show that without BESS, the project achieves an Internal Rate of Return (IRR) of 21.30%, making it highly feasible. …

Go to article

Digital Twin And Cybersecurity In Additive Manufacturing, Lidong Wang Dec 2024

Digital Twin And Cybersecurity In Additive Manufacturing, Lidong Wang

Journal of Cybersecurity Education, Research and Practice

Additive manufacturing (AM) has been applied to automotive, aerospace, medical sectors, etc., but there are still challenges such as parts’ porosity, cracks, surface roughness, intrinsic anisotropy, and residual stress because of the high level of thermal gradient. It is significant to conduct the modeling and simulation of the AM process and achieve quality products. Digital Twin (DT) can help AM with forecasting defects/errors through simulation and real-time process monitoring. DT is a concept of Industry 4.0, and its digital structure reflects the real-time behaviors of a cyber-physical or physical system. This paper introduces the progress of DT applications in AM, …

Go to article

A Fast Federated Learning-Based Crypto-Aggregation Scheme And Its Simulation Analysis, Boshen Lü, Xiao Song Dec 2024

A Fast Federated Learning-Based Crypto-Aggregation Scheme And Its Simulation Analysis, Boshen Lü, Xiao Song

Journal of System Simulation

Abstract: To solve the problem of increased computation and communication costs caused by using homomorphic encryption (HE) to protect all gradients in traditional cryptographic aggregation (cryptoaggregation) schemes, a fast crypto-aggregation scheme called RandomCrypt was proposed. RandomCrypt performed clipping and quantization to fix the range of gradient values and then added two types of noise on the gradient for encryption and differential privacy (DP) protection. It conducted HE on noise keys to revise the precision loss caused by DP protection. RandomCrypt was implemented based on a FATE framework, and a hacking simulation experiment was conducted. The results show that the proposed …

Go to article

Critical Node Identification Method For Unmanned Aerial Vehicle Cluster Considering Localized Features, Chenglong Shi, Xiang Hua, Dong Wang, Jinjin Zhang, Tianqi Jiang, Yuanzhang Dang Dec 2024

Critical Node Identification Method For Unmanned Aerial Vehicle Cluster Considering Localized Features, Chenglong Shi, Xiang Hua, Dong Wang, Jinjin Zhang, Tianqi Jiang, Yuanzhang Dang

Journal of System Simulation

Abstract: Aiming at the problem that the UAV cluster critical node identification methods focus on the global network and ignore the correlation between nodes and their local features, a critical nodes identification method for unmanned aerial vehicle cluster considering local features is proposed. An unmanned aerial vehicle cluster network model is constructed based on complex network theory. The Laplacian energy is introduced to evaluate the importance of node within two hops, and information entropy is combined to evaluate the importance of node in a specific motif to comprehensive identify the critical nodes. Simulation results demonstrate that this method identifies critical …

Go to article

Optimization Of Urban Agglomeration Transportation Network Evacuation Paths, Bowei He, Chengbing Li, Shida Nie, Jialin Wang Dec 2024

Optimization Of Urban Agglomeration Transportation Network Evacuation Paths, Bowei He, Chengbing Li, Shida Nie, Jialin Wang

Journal of System Simulation

Abstract: Given the complexity of the internal transportation network structure within urban agglomerations and the presence of numerous alternative routes, this paper proposes an enhanced ant colony algorithm to address the evacuation path problem of urban agglomeration transportation networks. A comprehensive urban agglomeration transportation network model is constructed, in which the issue of virtual transfer edges within the urban scope is considered and a weighting function is constructed taking into account the travelling time cost and the transferring time cost. Optimizations are applied to the ant colony algorithm, constructing an adaptive adjustment of state transitions and an information pheromone update …

Go to article

A Threat Assessment Method In Uncertain Dynamic Environments, Mei Yang, Bingkun Wang, Zhongjie Zhang, Yan Zeng, Jian Huang Dec 2024

A Threat Assessment Method In Uncertain Dynamic Environments, Mei Yang, Bingkun Wang, Zhongjie Zhang, Yan Zeng, Jian Huang

Journal of System Simulation

Abstract: A threat assessment method based on priori information and dynamic observation results is studied for the existence of dynamic uncertainty in complex war systems. The data mining is applied to obtain prior knowledge on the battlefield situation and construct an equipment-related confidence matrix. The sensor model is constructed to dynamically update the number of blue-side entities under the current situation by using the Bayesian method and considering both intelligence and observation results. The threat evaluation indicators and their weights are determined, and the TOPSIS method is used to finish the threat assessment. This method can well describe the complex …

Go to article

Research On Adaptive Scheduling Of Single-Arm Cluster Tools For Throughput Ratio Of Multiple Wafer Types With Concurrent Processing, Chunrong Pan, Yu Cui, Wenqing Xiong, Hao Zhou, Jiliang Luo Dec 2024

Research On Adaptive Scheduling Of Single-Arm Cluster Tools For Throughput Ratio Of Multiple Wafer Types With Concurrent Processing, Chunrong Pan, Yu Cui, Wenqing Xiong, Hao Zhou, Jiliang Luo

Journal of System Simulation

Abstract: Concurrent processing makes the wafer fabrication process prone to deadlocks and completion node ambiguity. A Petri net model is established to describe the system operation process by taking for the single-arm cluster tools for fully parallel processing of two wafer types as the research object, and a control strategy is developed to avoid the system deadlock. Based on the Petri net model, the temporal properties of the system is analyzed based on earliest starting strategy, and the action cycle sequence of robot is determined during the monitoring cycle for different scenarios of lot switching in a single production monitoring …

Go to article

Research On Latent Space-Based Anime Face Style Transfer And Editing Techniques, Haixin Deng, Fengquan Zhang, Nan Wang, Wancai Zhang, Jierui Lei Dec 2024

Research On Latent Space-Based Anime Face Style Transfer And Editing Techniques, Haixin Deng, Fengquan Zhang, Nan Wang, Wancai Zhang, Jierui Lei

Journal of System Simulation

Abstract: To address issues such as image distortion and style uniformity in existing anime style transfer networks within the field of image simulation, we propose the TGFE-TrebleStyleGAN (textguided facial editing with TrebleStyleGAN) for anime facial style transfer and editing. This framework leverages vector guidance within the latent space to generate facial imagery and incorporates a detail control module and a feature control module to constrain the aesthetic attributes of the generated images. The images generated by the transfer network serve as style control signals and constraints for fine-grained segmentation. Text-to-image generation technology captures correlations between styletransferred images and semantic information. …

Go to article

Research On Multi-Objective Gait Planning Of Biped Robot Based On Virtual Prototype, Yankai Zhang, Xuesong Wang, Yubin Jin, Dongsheng Zhang Dec 2024

Research On Multi-Objective Gait Planning Of Biped Robot Based On Virtual Prototype, Yankai Zhang, Xuesong Wang, Yubin Jin, Dongsheng Zhang

Journal of System Simulation

Abstract: A multi-objective gait optimization method based on virtual prototype is proposed to address the difficulty of balancing personalisation and performance in gait planning for bipedal robots. A scale prototype of a planar underactuated biped robot is created according to the body structure of Chinese people, and an identification approach is used to determine the robot's exact inertial parameters. A virtual prototype of the robot is created, and three optimization goals—speed, energy use, and stability are developed. Using the enhanced NSGA-II algorithm, the Pareto optimal solution set for the robot multi-objective gait planning issue is produced. Numerous gaits that conform …

Go to article

Intersection Braking Guidance For Trams Based On Lineside Signs, Wencong Tong, Jing Teng, Junxian Li, Xing Yao, Zhongjie Zhang Dec 2024

Intersection Braking Guidance For Trams Based On Lineside Signs, Wencong Tong, Jing Teng, Junxian Li, Xing Yao, Zhongjie Zhang

Journal of System Simulation

Abstract: Trams need to brake frequently due to signal control and safety speed limits at intersections. Due to the inaccuracy of distance judgment, tram drivers tend to reserve extra braking distance at intersections, resulting in lower braking coefficients and a decrease in speed. An intersection braking guidance method using lineside signs is proposed for trams to reduce braking distance redundancy and improve running speed. Drivers are guided to brake with the shortest possible distance by marking the initial braking position and speed of trams with fixed lineside signs. A tram driving simulation system was developed based on a vehicle dynamics …

Go to article

A Clustering-Based Location Allocation Method For Delivery Sites Under Epidemic Situations, Yaqiong Zhou, Junqi Chen, Weishi Li, Sihang Qiu, Rusheng Ju Dec 2024

A Clustering-Based Location Allocation Method For Delivery Sites Under Epidemic Situations, Yaqiong Zhou, Junqi Chen, Weishi Li, Sihang Qiu, Rusheng Ju

Journal of System Simulation

Abstract: To address the poor performance of commonly used intelligent optimization algorithms in solving location problems—specifically regarding effectiveness, efficiency, and stability—this study proposes a novel location allocation method for the delivery sites to deliver daily necessities during epidemic quarantines. After establishing the optimization objectives and constraints, we developed a relevant mathematical model based on the collected data and utilized traditional intelligent optimization algorithms to obtain Pareto optimal solutions. Building on the characteristics of these Pareto front solutions, we introduced an improved clustering algorithm and conducted simulation experiments using data from Changchun City. The results demonstrate that the proposed algorithm outperforms …

Go to article

Research On Verification Method Of Motor Startups In Nuclear Power Plants Based On Topology Recognition, Baozhu Li, Weijie Dong, Chao Chen Dec 2024

Research On Verification Method Of Motor Startups In Nuclear Power Plants Based On Topology Recognition, Baozhu Li, Weijie Dong, Chao Chen

Journal of System Simulation

Abstract: There are many motors in operation or on standby in nuclear power plants, and the startup of group motors will have a great impact on the voltage of the emergency bus. At present, there is no special or inexpensive software to solve this problem, and the experience of engineers is not accurate enough. Therefore, this paper developed a method and system for the startup calculation of group motors in nuclear power plants and proposed an automatic generation method of circuit topology in nuclear power plants. Each component in the topology was given its unique number, and the component class …

Go to article

Modeling And Integration Method Of Sysml Model For Complex Business Scenarios, Bing Yu, Baoran An, Shicao Zhao Dec 2024

Modeling And Integration Method Of Sysml Model For Complex Business Scenarios, Bing Yu, Baoran An, Shicao Zhao

Journal of System Simulation

Abstract: The development process of complex equipment involves multi-stage business processes, multi-level product architecture, and multi-disciplinary physical processes. The relationship between its system model and various disciplinary models is extremely complicated. In the modeling and integration process, extensive customized development is needed to realize model integration and interoperability in different business scenarios. Meanwhile, the differences in modeling and interaction between different modeling tools make it difficult to support the consistent representation of models in complex scenarios. To improve the efficiency of system modeling and integration in complex business scenarios, a system modeling and integration method was proposed. This method took …

Go to article

Algorithm And Semi-Physical System Simulation For Command Intent Recognition Of Uav In Low-Resource Environment, Hongfu Liu, Yajing Fu, Wanpeng Zhang, Hu Zhang Dec 2024

Algorithm And Semi-Physical System Simulation For Command Intent Recognition Of Uav In Low-Resource Environment, Hongfu Liu, Yajing Fu, Wanpeng Zhang, Hu Zhang

Journal of System Simulation

Abstract: When a communication network is partially disabled or disrupted, an UAV is plunged into a "low-resource environment" and must rely on local hardware resources. This situation imposes constraints on computing power, storage capacity, and energy availability. To address the need for command intent recognition in such environments, a semi-physical simulation system for UAV in emergency rescue operations has been designed and implemented. Based on the low resource airborne hardware in the loop, the system simulates UAV command intention recognition and mission planning through GIS+BIM 3D environment modeling task scenarios. A new lightweight algorithm for intent recognition has been proposed, …

Go to article

Uav Swarm Obstacle Avoidance Based On Visual Filed And Adaptive Radius, Gaohang Ai, Chuntao Li Dec 2024

Uav Swarm Obstacle Avoidance Based On Visual Filed And Adaptive Radius, Gaohang Ai, Chuntao Li

Journal of System Simulation

Abstract: Aiming at the obstacle avoidance problem of large-scale UAV swarm tracking flight route, a swarm obstacle avoidance algorithm based on distributed model predictive control combined with visual field and adaptive obstacle avoidance radius is proposed. In the process of swarm flight, the UAV obtains the reference route information of the current moment according to its own position, and obtains the predicted trajectory of its neighbors through local information interaction. When encountering obstacles, the adaptive obstacle avoidance radius and field of view topology method are combined to effectively solve the problem that the internal safety distance cannot be maintained and …

Go to article

A Novel Research Pattern For The Simulation Of Complex Systems Sigd, Bin Chen, Runkang Guo, Zhengqiu Zhu, Yong Zhao, Yatai Ji, Aiguo Chen, Guangquan Cheng Dec 2024

A Novel Research Pattern For The Simulation Of Complex Systems Sigd, Bin Chen, Runkang Guo, Zhengqiu Zhu, Yong Zhao, Yatai Ji, Aiguo Chen, Guangquan Cheng

Journal of System Simulation

Abstract: The complexity of the system is mainly reflected in the numerous components and extremely complex interactions. Combined with the current trend of artificial intelligence development, this paper analyzes and considers the changes in thinking mode brought by simulation discipline research, and forms an understanding of the connotation and research scope of simulation intelligence. A new pattern for complex system simulation research is proposed: "simulation intelligence based generating decisions (SIGD)". In the SIGD pattern, the similar principles, modeling methods, and decision-guiding modes in simulation disciplines are different from those in traditional simulation. Under the guidance of this concept, a connection-oriented …

Go to article

Simulation Of Cascade Failure In Urban Rail Transit Hypernetworks Based On Hypergraph Theory, Zijin Han, Mingjun Qian, Xixian Wang, Kaiyue Zhang Dec 2024

Simulation Of Cascade Failure In Urban Rail Transit Hypernetworks Based On Hypergraph Theory, Zijin Han, Mingjun Qian, Xixian Wang, Kaiyue Zhang

Journal of System Simulation

Abstract: In order to enhance the resilience of urban rail transit networks to ensure stable operations and passenger safety in the face of emergencies, hypergraph theory is introduced to construct a hypergraph based urban rail transit hypernetwork model, and a nonlinear load-capacity cascading failure model based on passenger flow weighting is established. In response to the passenger evacuation process at actual transportation network stations, a load redistribution mechanism is proposed, taking into consideration both the network level and the importance of passenger flow. To address scenarios where stations in actual traffic networks can still accommodate loads during shutdowns, a node …

Go to article

First Prev Next Last