Operations Research, Systems Engineering and Industrial Engineering Commons^™

Control Policies For A Dynamic Storage System With Multiple Lifts And Shuttles, Iris F.A. Vis, Hector J. Carlo, Paloma Diaz, Maria E. Laboy, Bruno Vanwijgaarden

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

New types of Automated Storage and Retrieval Systems, able to achieve high throughput levels, are continuously being developed and require new control polices to take full advantage of the developed system. In this paper we study a dynamic storage system as developed by Vanderlande Industries consisting of a conveyor, two lifts, multiple transfer shuttles, and a storage rack. One of the decision problems for this system is the scheduling problem of the two lifts. In other words, which lift is going to handle which request and in which order. In this paper, we derive an integrated look-ahead heuristic based on …

Digital Human Models Of People With Disabilities, Ron Hamameh

Wayne State University Theses

The current state-of-the-art in Digital Human Modeling (DHM) allows for full simulation and analysis of any task a person is required to perform at home, at work, in the military, in space, in sports, etc. The problem is that the software is missing a very important population: people with physical disabilities. What modifications and enhancements must be made to existing, commercially available DHM software to include this population?

Low-Cost Obstacle Detection Sensor Array For Unmanned Agricultural Vehicles, Santosh Pitla, Joe D. Luck, Scott A. Shearer

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

Mobile robots deployed for agricultural applications must operate in harsh environments where they encounter a variety of both moveable and immovable obstacles. Typically, robots utilize vision sensors to learn about the environment in which they are working. In this study, a low-cost infra-red (IR) sensor array was developed to act as an obstacle detection aid for an unmanned agricultural vehicle (UAgV). The IR sensor array developed consists of six IR sensors mounted on two orthogonal steel plates. The array of sensors was continuously oscillated about the yaw-axis to traverse a 200° field of view in front of the UAgV. Three …

Microbial Treatment Of Swine Fecal Waste To Generate Long-Chain Linear Alkanes After Fast Pyrolysis, Lisa A. Fitzgerald, C. Ziemer, S. E. Lizewski, Bradley R. Ringeisen, K. Henry, Justin C. Biffinger

United States Navy: Publications

Research into the generation of energy from human and animal waste has been primarily focused on gas production (especially methane and hydrogen). While there is some work concentrated on ethanol and biodiesel creation from wastes (fuels used for ground transportation primarily), increasing research interest has been recently directed toward long chain hydrocarbon production for aviation fuels. Kerosene components from swine fecal waste have been generated from four natural sources: undigested dietary lipids, host lipids excreted in feces, bacterial cell walls and products of bacterial fermentation.

Structure–Property Relations Of Cyclic Damage In A Wrought Magnesium Alloy, J. D. Bernard, J. B. Jordon, M. F. Horstemeyer, H. El Kadiri, J. Baird, Dabid Lamb, Alan A. Luo

United States Army: Publications

The fatigue properties of an extruded Mg–3Al–0Mn magnesium alloy component were evaluated experimentally. Fully reversed, strain control fatigue tests were conducted on specimens extracted from regions with a varying grain size and texture. Scanning electron microscopy was employed to establish structure–property relations between microstructure and cyclic damage. Relations were drawn between microstructural features such as particle size, grain size, initial Taylor factor and the number of cycles to failure.

Time And Degree Of Glycemic Derangement Are Associated With Increased Mortality In Trauma Patients In The Setting Of Tight Glycemic Control, Michael G. Corneille, Celina Villa, Steven Wolf, Joel E. Michalek, Inkyung Jung, Charles E. Wade, John G. Meyers, Daniel L. Dent, Deborah Mueller, Ronald M. Stewart

United States Army: Publications

BACKGROUND: Tight glucose control (TGC) may reduce mortality in critically ill trauma patients. We hypothesize that euglycemia is beneficial, and a measure considering time and degree of hyperglycemia is most associated with mortality.

METHODS: We performed a review of intensive care unit trauma patients admitted for more than 3 days between January 2005 and December 2007 on a TGC protocol with a goal of 80 to 110 mg/dL. Hyperglycemic, hypoglycemic, and euglycemic time ranges, and area of interpolated curves above and below 80 to 110 mg/dL were assessed. Associations with mortality were based on logistic regression models adjusted for age, …

Activity Of Topical Antimicrobial Agents Against Multidrug-Resistant Bacteria Recovered From Burn Patients, Jessie S. Glasser, Charles H. Guymon, Katrin Mende, Steven E. Wolf, Duane R. Hospenthal, Clinton K. Murray

United States Army: Publications

Background:

Topical antimicrobials are employed for prophylaxis and treatment of burn
wound infections despite no established susceptibility breakpoints, which are becoming vital in an era of multidrug-resistant (MDR) bacteria. We compared two methods of determining topical antimicrobial susceptibilities.

Methods:

Isolates of Pseudomonas aeruginosa, methicillin-resistant Staphylococcus aureus (MRSA), extended spectrum beta-lactamase (ESBL) producing Klebsiella pneumoniae, and Acinetobacter baumanii-calcoaceticus (ABC) from burn patients were tested using broth microdilution and agar well diffusion to determine minimum inhibitory concentrations (MICs) and zones of inhibition (ZI). Isolates had systemic antibiotic resistance and clonality determined. MDR included resistance to antibiotics in three or more …

Socio-Demographic And Drug Use Factors Associated With Hiv-1 Recombinants And Dual Infections In Northern Thai Drug Users: Associations Of Risk With Genetic Complexity, G. H. Kijak, C. Beyrer, S. Tovanabutra, T. Sripaipan, V. Suriyanon, N. Moqueet, E. Sanders-Buell, P. Saokhieo, U. Timpan, J. Jittiwutikarn, M. L. Robb, D. L. Birx, D. D. Celentano, F. E. Mccutchan

United States Army: Publications

Background:

Dual infection with diverse HIV strains can foster the emergence of recombinants. The resulting  increase in viral genetic diversity is a major challenge for vaccine development HIV treatment. In this study we aim to investigate the socio demographic factors associated with an increasing level of genetic diversity among HIV strains in a population of drug-users in Northern Thailand.

Methods:

From 1999 through 2000, 2231 volunteers were enrolled in the Opiate- Users Research in Chiang Mai, Thailand. HIV subtype analysis was conducted among those HIV-1 seropositive (n = 347) using a multi-region hybridization assay. Social and demographic variables were assessed …

Toxicity And Bioaccumulation Of Tnt In Marine Fish In Sediment Exposures, Guilherme R. Lotufo, William Blackburn, Sydney J. Marlborough, John W. Fleeger

United States Army: Publications

The bioaccumulation potential and toxicity of 2, 4, 6-trinitrotoluene (TNT) spiked to sediment was evaluated in juvenile sheeps head minnows (JSHM, Cyprinodon variegatus) and adult freckled blennies (FB, Hypsoblennius ionthas). The JSHM were exposed for 4 days in the presence or absence of a mesh separating fish from sediment. FB were exposed to sediment for 7 days. During the 24-day storage period(4 °C), extensive transformation of spiked TNT occurred and concentrations are expressed as the sum of TNT, aminodinitrotoluenes and diaminonitrotoluenes (Sum TNT), on a dry weight basis. Sum TNT in the overlying water, not exchanged during exposure, …

A Value Model For Product Development Process Using Lean Principles, Salik Yadav

Masters Theses

"This research presents a value quantification model for multi-stage product development Process (PDP) using lean value principles. The PDP stages considered in this research include conceptual development, systems design, detailed design and prototyping stages. The value at any of the PDP stages is formulated as a function of six factors: (a) importance of customer requirements, (b) cost of customer's ownership, (c) parts/service availability, (d) weighted average cost of capital, (e) information evolution, and (f) risk reduction. Factors (a)-(d) are adequately addressed in the literature. This study focuses on information evolution and risk reduction factors. These two factors are defined by …

Strategic Process Integration Of Energy And Environmental Systems In Wastewater Treatment Plants, Bharath Kumar Gangichetty

Masters Theses

"Green environmental practices are increasingly important in combating serious global energy and environmental issues. Most wastewater treatment facilities were built when energy costs were not a concern; however, an increasing demand for energy, changing climatic conditions, and constrained energy supplies have resulted in the need to apply more energy-conscious choices in the maintenance or upgrade of existing wastewater treatment facilities. A detailed analysis of the majority of water and wastewater treatment services shows that most facilities operate far below the efficiency levels needed for effective energy use. Failure to comply with regulated environmental standards is also a problem. Although standards …

Strategic Criteria For Evaluating Inland Freight Hub Locations, Robert Tyler Lipscomb

Masters Theses

"The aim of this thesis is to develop criteria that can be used to evaluate the current capabilities and sustainability of inland freight hubs. A review of the literature highlights the need for a more efficient freight distribution system to combat supply chain deficiencies and the important role that inland freight hubs play in creating this system. Also in the literature is a call for a more comprehensive approach to hub development decisions and the use of multi-criteria decision analysis. The decision to devote resources to logistics developments in a specific region must consider many factors that are both quantitative …

Detection Of Explosive Threats By Using Embedded Wireless Sensor Based Networks, Jake Daniel Hertenstein

Masters Theses

"This thesis focuses on the development of novel schemes for the detection of unintended electromagnetic emissions (UEE) from passive radio frequency (RF) receivers and chemical and biological (CB) agents for the purpose of locating explosive threats (ET) to improve survivability for equipment and personnel in the surrounding environment. The methods and architectures used in this work were developed for use with wireless sensor networks (WSNs). While previous work has shown that highly sensitive equipment is capable of long-range detection of UEE the intention of this work is to develop a network of small, low cost smart sensor nodes (SSNs) capable …

Improving Resiliency Using Graph Based Evolutionary Algorithms, Jayakanth Jayachandran

Masters Theses

"Resiliency is an important characteristic of any system. It signifies the ability of a system to survive and recover from unprecedented disruptions. Various characteristics exist that indicate the level of resiliency in a system. One of these attributes is the adaptability of the system. This adaptability can be enhanced by redundancy present within the system. In the context of system design, redundancy can be achieved by having a diverse set of good designs for that particular system. Evolutionary algorithms are widely used in creating designs for engineering systems, as they perform well on discontinuous and/or high dimensional problems. One method …

Development Of A Contingency Capillary Wastewater Management Device, Evan A. Thomas

Mechanical and Materials Engineering Faculty Publications and Presentations

The personal body-attached liquid liquidator (PBALL) is conceived as a passive, capillary-driven, contingency wastewater disposal device. In this contingency scenario, the airflow system on the NASA crew exploration vehicle is assumed to have failed, leaving only passive hardware and vacuum vent to dispose of wastewater. To meet these needs, the PBALL was conceived to rely on capillary action and urine wetting conditions from 0° < θadv ∼ 90°, be adaptable for both male and female use, collect and retain up to 1 L of urine, minimize splash-back, and allow continuous draining of the wastewater to vacuum while minimizing cabin air loss. A subscale PBALL test article, which was tested on NASA's reduced-gravity aircraft in April 2010, successfully demonstrated key components of this design.

Development Of A Framework To Evaluate Human Risk Towards Sustainable Risk Management, Ra'ed M. Jaradat, Rani A. Kady, C. Ariel Pinto

Engineering Management & Systems Engineering Faculty Publications

Risk managers are constantly faced with the challenge of making decisions at various levels of their organizations. One of the challenges, which often times is unavoidable, lies in assigning a monetary value to human risks. Such challenge necessitates engineering managers to make educated decisions on the level of risk that the organizations and businesses should accept when it comes to human. The purpose of this study is to suggest a suitable framework that captures this aspect of engineering Risk Management in order to make rational and sustainable decisions about such assessed risk. This will be accomplished by exploring the tools, …

Investigating Fabrication Methods For Micro Single-Chamber Solid Oxide Fuel Cells, Man Yang

Dissertations

A Solid Oxide Fuel Cell (SOFC) is a green energy technology that offers a cleaner and efficient alternative to fossil fuels. The efficiency and utility of SOFCs can be enhanced by fabricating miniaturized component structures within the fuel cell footprint. This research focuses on the microfabrication of parallel-connected inter-digitized design of micro single chamber SOFC (µ-SC-SOFCs). In this dissertation, candidate micro/nano fabrication techniques to precisely fabricate micro patterns on planar substrates have been studied. These include EBL, soft lithography, photolithography, and direct-writing. After analyzing preliminary results, two combinational approaches were further investigated. The first method involves the combination of the …

Project And Risk Management: A Systematic Approach, Baqer Alali, C. Ariel Pinto, Andreas Tolk, Rafael Landaeta

Engineering Management & Systems Engineering Faculty Publications

The main purpose of this paper is to discuss three related topics of project management, systems management, and risk management. The issue that would be addressed in this paper is how risks are addressed in project and systems management, and how risks are propagated between projects and systems. A framework is proposed to overcome the problem of risk propagation from project to the systems. It was shown that the proposed framework can be deployed to existing risk management process with reasonable interventions (e.g. process prescribed by PMI). Finally a proof-of-concept application shows potential of the framework for various types of …

Enterprise Business Alignment Using Quality Function Deployment, Multivariate Data Analysis And Business Modeling Tools, Diala Gammoh

Electronic Theses and Dissertations

This dissertation proposes two novel ideas to enhance the business strategy alignment to customer needs. The proposed business alignment clock is a new illustration to the relationships between customer requirements, business strategies, capabilities and processes. To line up the clock and reach the needed alignment for the enterprise, a proposed clock mechanism is introduced. The mechanism integrates the Enterprise Business Architecture (EBA) with the House of Quality (HoQ). The relationship matrix inside the body of the house is defined using multivariate data analysis techniques to accurately measure the strength of the relationships rather than defining them subjectively. A statistical tool, …

Knowledge Management Determinants Of Continuance Behavior: Evaluating The Air Force Knowledge Now Knowledge Management System, Eric Tucker

Electronic Theses and Dissertations

Knowledge management (KM) encompasses the set of capabilities, processes, tools, and techniques for the most effective use of knowledge by an organization. The goal of KM is to improve the organization's ability to create, transfer, retain, and apply knowledge. Knowledge management is a goal that many organizations seek to achieve. Organizations apply their strategies, plans, and implementation to achieve KM. Organizations use technology to implement their KM strategy. For some, this approach has worked well; however, for others, the results have fallen short. KM shortcomings revolve around employees' infrequent use of the technology. This research seeks to understand what influences …

Time Depedent Queuing Models Of The National Airspace, Chatabush Roongrat

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Air transportation in the US system has dramatically changed in the past few decades. The National Airspace System (NAS) has increasingly become congested. A high volume of air traffic demand is one of the major challenges of the NAS. However, air traffic is very difficult to study due to many uncertainties involved. It is important that we be able to understand the relationship under uncertainties due to aviation operations, precision of navigation and control, and traffic flow efficiency. Many queuing models have been studied to better understand and quantify these relationships. In the past decade, most queuing network models assume …

Quality Analysis In Flexible Manufacturing Systems With Batch Productions, Junwen Wang

University of Kentucky Doctoral Dissertations

To improve product quality and reduce cost, batch production is often implemented in many exible manufacturing systems. However, the current literature does not provide any method to analyze the quality performance in a flexible manufacturing system with batch production.

In this research, we present an analytical method with closed-form formula to evaluate the quality performance in such systems. Based on the model, we discover and investigate monotonic and non-monotonic properties in quality to provide practical guidance for operation management. To improve product quality, we introduce the notions of quality improvability with respect to product sequencing. In addition, we develop the …

Hazard Identification, Risk Assessment And Risk Control (Hirarc) In A Corrugated Box Manufacturer., Fraziel Barahim

Student Works (2010-2019)

Packaging is one of the biggest industries in the world. It involves paper, glass,metal, flexible and plastic. The corrugated paper packaging worldwide has been growing at 3% to 4% per annum. In line with the expansion of the corrugated paper packaging manufacturing, the potential hazards to human physical and health, property and the environment posed by its operations and production activities have created an increase in awareness and brought up safety issues amongst industry, government and public. The hazard identification and risk assessment plays a role in a number of areas in the safety management, including regulatory policies and guidelines, …

An Analysis Of The Integration Of Lean And Safety, Pankaj Mahesh Pai

Masters Theses

"The lean philosophy has proven potential to help businesses improve productivity and reduce its losses. Lean can give businesses a cutting edge in this age of global competition. The fundamental principle of lean is to identify wastes in the system and reduce or eliminate them. There is a concern that during lean implementations, the focus on productivity may result in health and safety issues being ignored or worse, changes driven by lean may introduce new hazards. The relationship between lean and safety is not clearly understood. Lean and safety should be compatible. Both strive to improve processes. Both are against …

Using Value Stream Mapping For Cost Modeling, Emily Marie Tucker

Masters Theses

"This thesis presents an effective cost model for the Selective Laser Sintering (SLS) process used in additive manufacturing practices. The various factors that influence the total cost of a build on both small and large frame machines are discussed. These attributes, which include labor and overhead rates, material costs, and process times, combine to generate the driving force behind a manufacturer's decision to use the small or large SLS machine for mass production. By developing and evaluating a current state value stream map for the small SLS machine, a financial analysis of the SLS process can be performed. By assigning …

Fusion Of Imprecise Qualitative Information, Florentin Smarandache, Xinde Li, Xianzhong Dai, Jean Dezert

Branch Mathematics and Statistics Faculty and Staff Publications

In this paper, we present a new 2-tuple linguistic representation model, i.e. Distribution Function Model (DFM), for combining imprecise qualitative information using fusion rules drawn from Dezert-Smarandache Theory (DSmT) framework. Such new approach allows to preserve the precision and efficiency of the combination of linguistic information in the case of either equidistant or unbalanced label model. Some basic operators on imprecise 2-tuple labels are presented together with their extensions for imprecise 2-tuple labels. We also give simple examples to show how precise and imprecise qualitative information can be combined for reasoning under uncertainty. It is concluded that DSmT can deal …

E-Quality: Using Dimensional Index Values Towards Improving Classification Accuracy, Prashanth Devaram

Open Access Theses & Dissertations

E-quality is a process through which inspection of the process and quality of the part produced is done online resulting in the improvement of the process and reduction in the amount of time consumed for the overall process. Automated quality control involves using a methodology to classify the parts based on the dimensions of the features on a part. However, achieving 100% classification accuracy is not an easy task, especially in area of quality control where small differences in dimensions result in part fall into a different category. In this study, a novel approach for modifying the data before being …

An Improved Methodology For Filling Missing Values In Spatiotemporal Climate Data Set, Antti Sorjamaa, Amaury Lendasse, Yves Cornet, Eric Deleersnijder

Engineering Management and Systems Engineering Faculty Research & Creative Works

In This Paper, an Improved Methodology for the Determination of Missing Values in a Spatiotemporal Database is Presented. This Methodology Performs Denoising Projection in Order to Accurately Fill the Missing Values in the Database. the Improved Methodology is Called Empirical Orthogonal Functions (EOF) Pruning, and It is based on an Original Linear Projection Method Called Empirical Orthogonal Functions (EOF). the Experiments Demonstrate the Performance of the Improved Methodology and Present a Comparison with the Original EOF and with a Widely Used Optimal Interpolation Method Called Objective Analysis. © Springer Science + Business Media B.v. 2009.

A Continuous Regression Function For The Delaunay Calibration Method, Francesco Corona, Elia Liitiäinen, Amaury Lendasse, Roberto Baratti, Lorenzo Sassu

Engineering Management and Systems Engineering Faculty Research & Creative Works

The Delaunay Tessellation and Topological Regression is a Local Simplex Method for Multivariate Calibration. the Method, developed within Computational Geometry, Has Potential for Applications in Online Analytical Chemistry and Process Monitoring. This Study Proposes a Novel Approach to Perform Prediction and Extrapolation using Delaunay Calibration Method. the Main Property of the Proposed Extension is the Continuity of the Estimated Regression Function Also Outside the Calibration Domain. to Support the Presentation, an Application in Estimating the Aromatic Composition in Light Cycle Oil by Near Infrared Spectroscopy is Discussed. © 2009 Ifac.

Use Of Web-Based Lessons Of Statistical Concepts With Graphics And Animation To Enhance The Effectiveness Of Learning, Lavanya Pillala

Browse all Theses and Dissertations

Statistics is of critical importance to engineers. However, many engineering students struggle to grasp the meaning of statistical concepts and the idiosyncrasies of statistical methodologies. Because of this problem, instructors of statistics are constantly searching for better ways to help students understand statistical concepts. The goal of this project is to design and develop web-based lessons that use graphics and animations to enhance the effectiveness of students' learning of statistical concepts.

Lessons of three important statistical concepts have been developed for this thesis - normal distribution, central limit theorem and confidence & tolerance intervals - following well-recognized instructional design development …