Open Access. Powered by Scholars. Published by Universities.®

Applied Mechanics Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 991 - 1020 of 1211

Full-Text Articles in Applied Mechanics

Enhanced Stability Of A Dewetting Thin Liquid Film In A Single-Frequency Vibration Field, Sergey Shklyaev, Mikhail Khenner, Alexei Alabuzhev Jan 2008

Enhanced Stability Of A Dewetting Thin Liquid Film In A Single-Frequency Vibration Field, Sergey Shklyaev, Mikhail Khenner, Alexei Alabuzhev

Mathematics Faculty Publications

Dynamics of a thin dewetting liquid film on a vertically oscillating substrate is considered. We assume moderate vibration frequency and large (compared to the mean film thickness) vibration amplitude. Using the lubrication approximation and the averaging method, we formulate the coupled sets of equations governing the pulsatile and the averaged fluid flows in the film, and then derive the nonlinear amplitude equation for the averaged film thickness. We show that there exists a window in the frequency-amplitude domain where the parametric and shear-flow instabilities of the pulsatile flow do not emerge. As a consequence, in this window the averaged description …

Go to article

Enhanced Stability Of A Dewetting Thin Liquid Film In A Single-Frequency Vibration Field, Sergey Shklyaev, Mikhail Khenner, Alexei Alabuzhev Jan 2008

Enhanced Stability Of A Dewetting Thin Liquid Film In A Single-Frequency Vibration Field, Sergey Shklyaev, Mikhail Khenner, Alexei Alabuzhev

Mathematics Faculty Publications

Dynamics of a thin dewetting liquid film on a vertically oscillating substrate is considered. We assume moderate vibration frequency and large (compared to the mean film thickness) vibration amplitude. Using the lubrication approximation and the averaging method, we formulate the coupled sets of equations governing the pulsatile and the averaged fluid flows in the film, and then derive the nonlinear amplitude equation for the averaged film thickness. We show that there exists a window in the frequency-amplitude domain where the parametric and shear-flow instabilities of the pulsatile flow do not emerge. As a consequence, in this window the averaged description …

Go to article

Morphologies And Kinetics Of A Dewetting Ultrathin Solid Film, Mikhail Khenner Jan 2008

Morphologies And Kinetics Of A Dewetting Ultrathin Solid Film, Mikhail Khenner

Mathematics Faculty Publications

The surface evolution model based on geometric partial differential equation is used to numerically study the kinetics of dewetting and dynamic morphologies for the localized pinhole defect in the surface of the ultrathin solid film with the strongly anisotropic surface energy. Depending on parameters such as the initial depth and width of the pinole, the strength of the attractive substrate potential and the strength of the surface energy anisotropy, the pinhole may either extend to the substrate and thus rupture the film, or evolve to the quasiequilibrium shape while the rest of the film surface undergoes phase separation into a …

Go to article

Dedication To Pierre Lallemand On The Occasion Of His Retirement, Dominque D'Humieres, Manfred Krafczyk, Li-Shi Luo, Robert Rubinstein Jan 2008

Dedication To Pierre Lallemand On The Occasion Of His Retirement, Dominque D'Humieres, Manfred Krafczyk, Li-Shi Luo, Robert Rubinstein

Mathematics & Statistics Faculty Publications

The fourth international conference for mesoscopic methods in engineering and science (http://www.icmmes. org), held in Munich, Germany, 16–20 July 2007, was closed with a celebration honouring Dr Pierre Lallemand on the occasion of his retirement from the Centre National de la Recherche Scientifique (CNRS) after more than 40 years of service.

Go to article

Elastic Wave Field Computation In Multilayered Nonplanar Solid Structures: A Mesh-Free Semianalytical Approach, Sourav Banerjee, Tribikram Kundu Jan 2008

Elastic Wave Field Computation In Multilayered Nonplanar Solid Structures: A Mesh-Free Semianalytical Approach, Sourav Banerjee, Tribikram Kundu

Faculty Publications

Multilayered solid structures made of isotropic, transversely isotropic, or general anisotropic materials are frequently used in aerospace, mechanical, and civil structures. Ultrasonic fields developed in such structures by finite size transducers simulating actual experiments in laboratories or in the field have not been rigorously studied. Several attempts to compute the ultrasonic field inside solid media have been made based on approximate paraxial methods like the classical ray tracing and multi-Gaussian beam models. These approximate methods have several limitations. A new semianalytical method is adopted in this article to model elastic wave field in multilayered solid structures with planar or nonplanar …

Go to article

Comparison Of Roadside Crash Injury Metrics Using Event Data Recorders, Doug Gabauer, Hampton C. Gabler Jan 2008

Comparison Of Roadside Crash Injury Metrics Using Event Data Recorders, Doug Gabauer, Hampton C. Gabler

Faculty Journal Articles

The occupant impact velocity (OIV) and acceleration severity index (ASI) are competing measures of crash severity used to assess occupant injury risk in full-scale crash tests involving roadside safety hardware, e.g. guardrail. Delta-V, or the maximum change in vehicle velocity, is the traditional metric of crash severity for real world crashes. This study compares the ability of the OIV, ASI, and delta-V to discriminate between serious and non-serious occupant injury in real world frontal collisions. Vehicle kinematics data from event data recorders (EDRs) were matched with detailed occupant injury information for 180 real world crashes. Cumulative probability of injury risk …

Go to article

). Size Dependency Of The Elastic Modulus Of Zno Nanowires: Surface Stress Effect, Guofeng Wang, Xiaodong Li Dec 2007

). Size Dependency Of The Elastic Modulus Of Zno Nanowires: Surface Stress Effect, Guofeng Wang, Xiaodong Li

Faculty Publications

Relation between the elastic modulus and the diameter (D) of ZnOnanowires was elucidated using a model with the calculated ZnOsurface stresses as input. We predict for ZnOnanowires due to surface stress effect: (1) when D>20nm, the elastic modulus would be lower than the bulk modulus and decrease with the decreasing diameter, (2) when 20nm>D>2nm, the nanowires with a longer length and a wurtzite crystal structure could be mechanically unstable, and (3) when D<2nm, the elastic modulus would be higher than that of the bulk value and increase with a decrease in nanowire diameter.

Go to article

Nanoindentation Of The A And C Domains In A Tetragonal Batio3 Single Crystal, Young-Bae Park, Matthew J. Dicken, Zhi-Hui Xu, Xiaodong Li Oct 2007

Nanoindentation Of The A And C Domains In A Tetragonal Batio3 Single Crystal, Young-Bae Park, Matthew J. Dicken, Zhi-Hui Xu, Xiaodong Li

Faculty Publications

Nanoindentation in conjunction with piezoresponse force microscopy was used to study domain switching and to measure the mechanical properties of individual ferroelectric domains in a tetragonal BaTiO3 single crystal. It was found that nanoindentation has induced local domain switching; the a and c domains of BaTiO3 have different elastic moduli but similar hardness.Nanoindentationmodulus mapping on the a and c domains further confirmed such difference in elasticity. Finite element modeling was used to simulate the von Mises stress and plastic strain profiles of the indentations on both a and c domains, which introduces a much higher stress level than …

Go to article

Impact Of A Microwave Curing Process On Tensile Strength Of Selected Carbon Fiber Composites, Brian B. Balzer Aug 2007

Impact Of A Microwave Curing Process On Tensile Strength Of Selected Carbon Fiber Composites, Brian B. Balzer

All-Inclusive List of Electronic Theses and Dissertations

The traditional process for curing carbon fiber (CF) composites has been the autoclave system. A review of recent research indicates curing CF composites in a microwave oven has the potential for reducing processing time. The problem statement of the experimental study was that the impact of a microwave curing process on tensile strength of selected CF composite specimens was unknown. The research study describes the statistical procedure and analysis of data to answer the specific question for the experimental trials: What is the effect on the tensile strength of cured CF composite samples due to the relationship of the autoclave …

Go to article

Reliability Of Concrete Masonry Unit Walls Subjected To Explosive Loads, Christopher D. Eamon Jul 2007

Reliability Of Concrete Masonry Unit Walls Subjected To Explosive Loads, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

This study discuses the development of a procedure that can be used to assess the reliability of concrete masonry unit infill walls subjected to personnel-delivered blast loads. Consideration is given to maintain reasonable computational effort for both the structural analysis and reliability models. Blast load and wall resistance models are developed based on experimental and analytical data, and resistance is evaluated with a large strain, large displacement transient dynamic finite element analysis. A sensitivity analysis is conducted to identify significant random variables and a reliability analysis conducted with a feasible level of computational effort. Reliability indices are estimated for two …

Go to article

An Experimental Evaluation Of Performance Variance For Internally Threaded Geometry Related To Extended Tap Wear In Low Carbon Steel, Todd E. Alberts May 2007

An Experimental Evaluation Of Performance Variance For Internally Threaded Geometry Related To Extended Tap Wear In Low Carbon Steel, Todd E. Alberts

All-Inclusive List of Electronic Theses and Dissertations

The development of internal threads in a manufactured part is in many cases one of the final operations in the production workflow. Quality issues in thread form development can destroy a part that has previously undergone expensive machining. The issue of tap wear is one of the multi-faceted elements that have a direct correlation on the quality of threaded components. The purpose of this research centers on resultant mechanical pull performance for the stripping of internally threaded geometry in low carbon steel as measured over various increments of the tap cutting life cycle.

Go to article

Observations Of Structural Damage Caused By Hurricane Katrina On The Mississippi Gulf Coast, Christopher D. Eamon, Patrick Fitzpatrick, Dennis D. Truax Apr 2007

Observations Of Structural Damage Caused By Hurricane Katrina On The Mississippi Gulf Coast, Christopher D. Eamon, Patrick Fitzpatrick, Dennis D. Truax

Civil and Environmental Engineering Faculty Research Publications

The loads associated with Hurricane Katrina led to the destruction or severe damage of approximately 130,000 homes and over 200 deaths in the state of Mississippi. This paper discusses the results of a field inspection of structural damage along the state’s Gulf Coast area caused by this hurricane. It was found that reinforced concrete, steel frame, and heavy timber structures generally performed well, with minimal structural damage. Precast concrete, light frame wood, and bridge structures generally performed poorly. Non-structural components of all building types, in particular facades and interior partitions subjected to storm surge, were typically destroyed. For various structures, …

Go to article

Influence Of Van Der Waals Forces On Increasing The Strength And Toughness In Dynamic Fracture Of Nanofibre Networks: A Peridynamic Approach, Florin Bobaru Ph.D. Jan 2007

Influence Of Van Der Waals Forces On Increasing The Strength And Toughness In Dynamic Fracture Of Nanofibre Networks: A Peridynamic Approach, Florin Bobaru Ph.D.

Department of Engineering Mechanics: Faculty Publications

The peridynamic method is used here to analyse the effect of van der Waals forces on the mechanical behaviour and strength and toughness properties of three-dimensional nanofibre networks under imposed stretch deformation. The peridynamic formulation allows for a natural inclusion of long-range forces (such as van der Waals forces) by considering all interactions as ‘long-range’. We use van der Waals interactions only between different fibres and do not need to model individual atoms. Fracture is introduced at the microstructural (peridynamic bond) level for the microelastic type bonds, while van der Waals bonds can reform at any time. We conduct statistical …

Go to article

Slow Flow Between Concentric Cones, O. Hall, C. P. Hills, A. D. Gilbert Jan 2007

Slow Flow Between Concentric Cones, O. Hall, C. P. Hills, A. D. Gilbert

Articles

This paper considers the low-Reynolds-number flow of an incompressible fluid contained in the gap between two coaxial cones with coincident apices and bounded by a spherical lid. The two cones and the lid are allowed to rotate independently about their common axis, generating a swirling motion. The swirl induces a secondary, meridional circulation through inertial effects. For specific configurations complex eigenmodes representing an infinite sequence of eddies, analogous to those found in two-dimensional corner flows and some three-dimensional geometries, form a component of this secondary circulation. When the cones rotate these eigenmodes, arising from the geometry, compete with the forced …

Go to article

Reliability-Based Optimization Of Fiber-Reinforced Polymer Composite Bridge Deck Panels, Michel D. Thompson, Christopher D. Eamon, Masoud Rais-Rohani Dec 2006

Reliability-Based Optimization Of Fiber-Reinforced Polymer Composite Bridge Deck Panels, Michel D. Thompson, Christopher D. Eamon, Masoud Rais-Rohani

Civil and Environmental Engineering Faculty Research Publications

A reliability-based optimization (RBO) procedure is developed and applied to minimize the weight of eight fiber-reinforced polymer composite bridge deck panel configurations. The method utilizes interlinked finite element, optimization, and reliability analysis procedures to solve the weight minimization problem with a deterministic strength constraint and two probabilistic deflection constraints. Panels are composed of an upper face plate, lower face plate, and a grid of interior stiffeners. Different panel depths and stiffener layouts are considered. Sensitivity analyses are conducted to identify significant design and random variables. Optimization design variables are panel component ply thicknesses while random variables include load and material …

Go to article

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor Jun 2006

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Go to article

Elastic Modulus Of Amorphous Sio2 Nanowires, Hai Ni, Xiaodong Li, Hongsheng Gao Jan 2006

Elastic Modulus Of Amorphous Sio2 Nanowires, Hai Ni, Xiaodong Li, Hongsheng Gao

Faculty Publications

Amorphous SiO2 nanowires with diameter ranging from 50 to 100 nm were synthesized using chemical vapor deposition(CVD) under an argon atmosphere at atmospheric pressure. Nanoscale three-point bending tests were performed directly on individual amorphous SiO2 nanowires using an atomic force microscope (AFM).Elastic modulus of the amorphous SiO2 nanowires was measured to be 76.6±7.2GPa, which is close to the reported value of the bulk SiO2 and thermally grown SiO2 thin films, but lower than that of plasma-enhanced CVD SiO2 thin films. The amorphous SiO2 nanowires exhibit brittle fracture failure in bending.

Go to article

Elastic Wave Propagation In Sinusoidally Corrugated Waveguides, Sourav Banerjee, Tribikram Kundu Jan 2006

Elastic Wave Propagation In Sinusoidally Corrugated Waveguides, Sourav Banerjee, Tribikram Kundu

Faculty Publications

The ultrasonicwave propagation in sinusoidally corrugated waveguides is studied in this paper. Periodically corrugated waveguides are gaining popularity in the field of vibration control and for designing structures with desired acoustic band gaps. Currently only numerical method (Boundary Element Method or Finite Element Method) based packages (e.g., PZFlex) are in principle capable of modeling ultrasonic fields in complex structures with rapid change of curvatures at the interfaces and boundaries but no analyses have been reported. However, the packages are very CPU intensive; it requires a huge amount of computation memory and time for its execution. In this paper a new …

Go to article

System Identification Of A Pasteurisation Process: A Comparison Of Direct And Indirect Methods, Niel Canty Jan 2006

System Identification Of A Pasteurisation Process: A Comparison Of Direct And Indirect Methods, Niel Canty

Theses

The primary focus of this research is to identify a linear model for a direct steam injection (DSI) pasteurisation process which is a component of a large-scale pilot evaporation process widely used in the dairy industry. The pasteurisation process has been identified as a key component of the evaporation process. The author believes that no previously published work has focused on identifying models for a DSI pasteurisation process which makes this work an original contribution to the area. The pasteurisation process can be modelled as a single-input, single-output (SISO) process with a measurable disturbance. Thus two transfer functions were required …

Go to article

An Experimental Investigation Of Guided Wave Propagation In Corrugated Plates Showing Stop Bands And Pass Bands, Tribikram Kundu, Sourav Banerjee, Kumar V. Jata Jan 2006

An Experimental Investigation Of Guided Wave Propagation In Corrugated Plates Showing Stop Bands And Pass Bands, Tribikram Kundu, Sourav Banerjee, Kumar V. Jata

Faculty Publications

Nonplanar surfaces are often encountered in engineering structures. In aerospace structures, periodically corrugated boundaries are formed by friction-stir-welding. In civil engineering structures, rebars used in reinforced concrete beams and slabs have periodic surface. Periodic structures are also being used to create desired acoustic band gaps. For health monitoring of these structures, a good understanding of the elastic wave propagation through such periodic structures is necessary. Although a number of research papers on the wave propagation in periodic structures are available in the literature, no one experimentally investigated the guided wave propagation through plates with periodic boundaries and compared the experimental …

Go to article

Top-Down Structure And Device Fabrication Using In Situ Nanomachining, Xiaodong Li, Xinnan Wang, Qihua Xiong, Peter C. Eklund Dec 2005

Top-Down Structure And Device Fabrication Using In Situ Nanomachining, Xiaodong Li, Xinnan Wang, Qihua Xiong, Peter C. Eklund

Faculty Publications

We demonstrate the potential of an alternative tool for the fabrication of nanoscale structures and devices. A nanoindenter integrated with an atomic force microscope is shown to be a powerful machine tool for cutting precise length nanowires or nanobelts and for manipulating the shortened wires. We also demonstrate its utility in cutting grooves and fabricating dents (or periodic arrays of dents) in ZnSnanobelts. This approach permits the direct mechanical machining of nanodevices that are supported on a substrate without the inherent complications of e beam or photolithography.

Go to article

Load And Resistance Factor Calibration For Wood Bridges, Andrzej S. Nowak, Christopher D. Eamon Nov 2005

Load And Resistance Factor Calibration For Wood Bridges, Andrzej S. Nowak, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

The paper presents the calibration procedure and background data for the development of design code provisions for wood bridges. The structural types considered include sawn lumber stringers, glued-laminated girders, and various wood deck types. Load and resistance parameters are treated as random variables, and therefore, the structural performance is measured in terms of the reliability index. The statistical parameters of dead load and live (traffic) load, are based on the results of previous studies. Material resistance is taken from the available test data, which includes consideration of the post-elastic response. The resistance of components and structural systems is based on …

Go to article

Evaluation Of Accuracy And Efficiency Of Some Simulation And Sampling Methods In Structural Reliability Analysis, Christopher D. Eamon, Michel D. Thompson, Zhenyu Liu Jul 2005

Evaluation Of Accuracy And Efficiency Of Some Simulation And Sampling Methods In Structural Reliability Analysis, Christopher D. Eamon, Michel D. Thompson, Zhenyu Liu

Civil and Environmental Engineering Faculty Research Publications

Numerous simulation and sampling methods can be used to estimate reliability index or failure probability. Some point sampling methods require only a fraction of the computational effort of direct simulation methods. For many of these methods, however, it is not clear what trade-offs in terms of accuracy, precision, and computational effort can be expected, nor for which types of functions they are most suited. This study uses nine procedures to estimate failure probability and reliability index of approximately 200 limit state functions with characteristics common in structural reliability problems. The effects of function linearity, type of random variable distribution, variance, …

Go to article

Mechanics Of Hydrogenated Amorphous Carbon Deposits From Electron-Beam-Induced Deposition Of Paraffin Precursor, W. Ding, D. A. Dikin, X. Chen, R. D. Piner, R. S. Ruoff, E. Zussman, X. Wang, Xiaodong Li Jul 2005

Mechanics Of Hydrogenated Amorphous Carbon Deposits From Electron-Beam-Induced Deposition Of Paraffin Precursor, W. Ding, D. A. Dikin, X. Chen, R. D. Piner, R. S. Ruoff, E. Zussman, X. Wang, Xiaodong Li

Faculty Publications

Many experiments on the mechanics of nanostructures require the creation of rigid clamps at specific locations. In this work, electron-beam-induced deposition(EBID) has been used to depositcarbonfilms that are similar to those that have recently been used for clamping nanostructures. The film deposition rate was accelerated by placing a paraffin source of hydrocarbon near the area where the EBIDdeposits were made. High-resolution transmission electron microscopy, electron-energy-loss spectroscopy, Raman spectroscopy, secondary-ion-mass spectrometry, and nanoindentation were used to characterize the chemical composition and the mechanics of the carbonaceous deposits. The typical EBIDdeposit was found to be hydrogenated amorphous carbon (a-C:H) having …

Go to article

Effect Of Edge-Stiffening And Diaphragms On The Reliability Of Bridge Girders, Christopher D. Eamon, Andrzej S. Nowak Mar 2005

Effect Of Edge-Stiffening And Diaphragms On The Reliability Of Bridge Girders, Christopher D. Eamon, Andrzej S. Nowak

Civil and Environmental Engineering Faculty Research Publications

Secondary elements such as barriers, sidewalks, and diaphragms may affect the distribution of live load to bridge girders. The objective of this study is to evaluate their effect on girder reliability if these elements are designed to be sufficiently attached to the bridge so as not to detach under traffic live loads. Simple span, two lane structures are considered, with composite steel girders supporting a reinforced concrete deck. Several representative structures are selected, with various configurations of barriers, sidewalks and diaphragms. Bridge analysis is performed using a finite element procedure. Load and resistance parameters are treated as random variables. Random …

Go to article

Medical Technology: Contexts And Content In Science And Technology, Michael A. De Miranda, Mark Doggett, Jane T. Evans Jan 2005

Medical Technology: Contexts And Content In Science And Technology, Michael A. De Miranda, Mark Doggett, Jane T. Evans

Architectural and Manufacturing Sciences Faculty Publications

No abstract provided.

Go to article

Dec 2004, Tractor Museum Dec 2004

Dec 2004, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Introductions Treasurer's Report Curator's Report

Go to article

Oct 2004, Tractor Museum Oct 2004

Oct 2004, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Old Trusty Show New Paint Scheme History of Ag Engineering Department

Go to article

Modeling Concrete Masonry Walls Subjected To Explosive Loads, Christopher D. Eamon, James T. Baylot, James L. O'Daniel Aug 2004

Modeling Concrete Masonry Walls Subjected To Explosive Loads, Christopher D. Eamon, James T. Baylot, James L. O'Daniel

Civil and Environmental Engineering Faculty Research Publications

Concrete masonry unit walls subjected to blast pressure were analyzed with the finite element method, with the goal of developing a computationally-efficient and accurate model. Wall behavior can be grouped into three modes of failure, which correspond to three ranges of blast pressures. Computational results were compared to high-speed video images and debris velocities obtained from experimental data. A parametric analysis was conducted to determine the sensitivity of computed results to critical modeling values. It was found that the model has the ability to replicate experimental results with good agreement. However, it was also found that, without knowledge of actual …

Go to article

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo Jun 2004

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Go to article

First Prev Next Last