Applied Mechanics Commons^™

In-Field Fuel Use And Load States Of Agricultural Field Machinery, Santosh Pitla, Joe D. Luck, Jared Werner, Nannan Lin, Scott A. Shearer

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The ability to define in-field tractor load states offers the potential to better specify and characterize fuel consumption rate for various field operations. For the same field operation, the tractor experiences diverse load demands and corresponding fuel use rates as it maneuvers through straight passes, turns, suspended operation for adjustments, repair and maintenance, and biomass or other material transfer operations. It is challenging to determine the actual fuel rate and load states of agricultural machinery using force prediction models, and hence, some form of in-field data acquisition capability is required. Controller Area Networks (CAN) available on the current model tractors …

Ni-Doped Sr2Fe1.5Mo0.5O6-Δ As Anode Materials For Solid Oxide Fuel Cells, Guoliang Xiao, Siwei Wang, Ye Lin, Zhibin Yang, Minfang Han, Fanglin Chen

Faculty Publications

10% Ni-doped Sr₂Fe_1.5Mo_0.5O_6-δ with A-site deficiency is prepared to induce in situ precipitation of B-site metals under anode conditions in solid oxide fuel cells. XRD, SEM and TEM results show that a significant amount of nano-sized Ni-Fe alloy metal phase has precipitated out from Sr_1.9Fe_1.4Ni_0.1Mo_0.5O_6-δ upon reduction at 800^◦C in H₂. The conductivity of the reduced composite reaches 29 S cm⁻¹ at 800^◦C in H₂. Furthermore, fuel cell performance of the composite anode Sr_{1.9 …}

Design Of Experimental Methods To Test The Performance Of Pads And Helmets Under Blast Loading Conditions, Kurtis Palu

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Improvised explosive devices (IEDs) have become a primary weapon in conflicts against US and allied forces. Improvements in body armor and medicine have increased the survivability of such events. These factors have caused an increase in traumatic brain injury (TBI) and mild traumatic brain injury (mTBI) induced by primary blast waves. Injury mechanisms caused from primary blast waves are not clearly understood or defined. How primary blast waves interact with materials or between narrow gaps found between helmet pads is not known. Two novel test fixtures were developed to provide a basic understanding of these two issues.

The first fixture …

Static Balancing Of The Cal Poly Wind Turbine Rotor, Derek Simon

Master's Theses

The balancing of a wind turbine rotor is a crucial step affecting the machine’s performance, reliability, and safety, as it directly impacts the dynamic loads on the entire structure.

A rotor can be balanced either statically or dynamically. A method of rotor balancing was developed that achieves both the simplicity of static balancing and the accuracy of dynamic balancing. This method is best suited, but not limited, to hollow composite blades of any size. The method starts by quantifying the mass and center of gravity of each blade. A dynamic calculation is performed to determine the theoretical shaking force on …

Matching Tractors And Implements, I W. Grevis-James

Journal of the Department of Agriculture, Western Australia, Series 4

Tractor and implement matching involves balancing implement load characteristics with tractor output characteristics to obtain the best output from the combination. Too much or too little can be costly.

How Many Acres Per Hour?, J G. Drever

Journal of the Department of Agriculture, Western Australia, Series 4

MANY farm tractor operators don't know exactly how much land is covered in an hour by implements drawn by their tractors. This information, useful on any farm where tractors are used, is of particular value in contract work.

The capacity of the machine or implement, or in other words, its rate of working, depends on the width of the machine, how fast it travels, how efficiently it is operated and the time it works.

Australian Tractor Test Report No. 41 : The Massey-Ferguson 135, G H. Vasey, F. T. Baillie

Journal of the Department of Agriculture, Western Australia, Series 4

THE Massey-Ferguson MF-135 is a general purpose tractor of 31 drawbar horsepower. It has 14.9 x 24 pneumatic tyres, and a three-speed gear box with a ratio change which, in the standard model, gives six forward and two reverse gears.

The model tested was also fitted with the optional "Multipower" facility, which gives an "on-the-go" shift to a higher speed for each gear, thus providing 12 forward and four reverse gears.

Australian Tractor Tests : International A554d : Report On Test No. 36 (Farmers' Edition), G H. Vasey, W. F. Baillie

Journal of the Department of Agriculture, Western Australia, Series 4

THIS Report is taken from the full Technical Report No. 36; results are shown here in briefer form: fuller explanations are added.

Values quoted may be rounded out to two instead of three significant figures; to this extent the values may differ slightly but not significantly from those shown in the Technical Report.

An Analysis Of Pressure Gasoline And Pressure Kerosene Stoves, Arnold E. Baragar

Nebraska Agricultural Experiment Station: Historical Research Bulletins

During the past few years inquiries have been received regarding the cost of operation, efficiency, and performance of pressure gasoline and pressure kerosene stoves. Because of the method of operation and the use of gasoline as fuel, safety from fire and carbon monoxide has been frequently questioned. Not only is it necessary to have technical information about this type of appliance in order to compare it with other types but it is further important to know whether one type of burner is superior to another; whether one type of oven construction will give better results than another and in general …