Applied Mechanics Commons^™

Experimental And Numerical Study On The Influence Of Carbon Fiber Reinforcement On The In-Plane Compressive Properties Of 3d Printed Hexagonal Honeycomb Core Structures, Deon Wallace

All Theses

There is difficulty with numerically replicating the behavior of composite honeycomb core structures numerically due to the trouble of gathering material properties from a hollow structure. Also, complex part geometries and carbon fiber reinforcement strategies can lead to unwanted structural weaknesses and variance in material properties that may not be reflected in numerical analysis when the part is additively manufactured. In this study, edgewise compressive testing is used to characterize the mechanical behavior and performance characteristics of these structures. The experimental results indicate an increase in the Young’s moduli of the honeycomb core structures as carbon fiber concentration increases. However, …

Predicting Long-Term Creep Behavior Using Short-Term Stress Relaxation Data In Expanded Polyethylene Foam, Andrew M. Seelig

All Theses

Closed cell expanded polyethylene (EPE) foams are widely used for protective packaging due to their high energy absorption properties and recyclability. However, these foams can be subjected to sustained compressive stresses (13.78 - 36.20 kPa), depending on density and application, leading to time-dependent deformation (creep). Creep reduces cushioning performance, making its understanding critical for effective protective packaging. Two standards, ASTM D3575 and ASTM D2221, define methods for conducting compressive creep tests on foam materials, with test durations extending up to 1000 hours. Accelerated methods such as Time Temperature Superposition (TTS) and the Stepped Isostress Method (SSM) have been explored for …

Tsunamigenesis On A Buoyant Granular Layer As A Model Of Ice Mélange In Ice-Choked Fjords, Nathan F. Reyner

All Theses

Glacial calving events can often create destructive tsunami waves in ice-choked fjords in the arctic region, posing a threat to local inhabitants and damaging coastlines. Here the sea is covered by a polydisperse granular material called ice mélange, whose properties can affect the wave characteristics. To investigate the role of a buoyant granular layer, as a model of ice mélange, on tsunami generation, or tsunamigenesis, a series of laboratory experiments were conducted by collapsing a column of dense granular material into a body of water with a layer of buoyant particles distributed across the liquid surface. Experiments were performed over …

Mechanistic Insights Into Polymer-Assisted Graphene Exfoliation: The Roles Of Velocity, Adhesion, Cohesion, Temperature, Peeling Mode, And Edge Defect Via Coarse-Grained Molecular Dynamics, Linjiale Dai

All Theses

Graphene exfoliation is a critical step in the fabrication of high-quality graphene

layers. However, the underlying fracture mechanisms remain poorly understood. In this

work, I employed coarse-grained (CG) molecular dynamics (MD) simulations to

investigate how factors such as interfacial binding energy, substrate cohesion, temperature,

peeling mode, and edge defects influence the outcome of the exfoliation process. To model

polymer-assisted mechanical exfoliation, I used a finite-size system in which multilayer

graphene (MLG) is sandwiched between two thin polymer films. Leveraging the

spatiotemporal efficiency of the CG model, I performed fifty simulation iterations per

parameter set and analyzed the results from a …

Influence Of Hygrothermal Conditions Of The Bistability Of Asymmetric Carbon Fiber Laminate Composites, Celia Hill

All Theses

Carbon fiber-reinforced polymer (CFRP) laminates have widespread use in many industries because of their exceptional strength-to-weight ratio. Carbon fiber laminates following an asymmetric layup orientation can exhibit bistability meaning the laminate can exist at two stable geometric configurations. The morphing characteristics of bistable CRFP has a growing level of interest because of its potential in various applications including space aircraft structures for easy repair, automotive structures for energy dissipation and ergonomics, robotics for flexible motion and energy harvesting. Existing research shows that both moisture and temperature affect the material properties and behavior of CFRP laminates, however, the influence of moisture …

Improved Ballistic Impact Resistance Of Nanofibrillar Cellulose Films With Discontinuous Fibrous Bouligand Architecture, Colby Caviness

All Theses

Natural protective materials offer unparalleled solutions for impact-resistant material designs that are simultaneously lightweight, strong, and tough. Particularly, the dactyl club of mantis shrimp features chitin nanofibrils organized in a Bouligand structure, which has been shown to effectively dissipate high-impact energy during powerful strikes. The mollusk shells also achieve excellent mechanical strength, toughness, and impact resistance with a staggered, layer-by-layer structure. Previous studies have shown that hybrid designs, by combining different bioinspired microstructures, can lead to enhanced mechanical strength and energy dissipation capabilities. Nevertheless, it remains unknown whether combining Bouligand and staggered structures in nanofibrillar cellulose (NFC) films, forming a …

The Generation Of A Physics Informed Machine Learning Model To Predict Defect Evolution In Materials & On The Thermally Activated Regime Of Dislocation Motion: A Simulation Driven Study On The Mechanical Behavior Of Crystals, Liam Myhill

All Theses

Line defects in crystals, known as dislocations, govern the mechanisms of plastic deformation at the micro-meso scale. The study of dislocations has proliferated the field of materials science and engineering for since the 1950’s, and modern studies show increasing utilization of computational methods to model the evolution of line defects in material systems. In keeping with modern research practice, the studies herewith demonstrate the use of advanced computing to generate models which can be used to better understand the behaviors of dislocations within crystal matrices. An advanced high-throughput model for a physically informed machine learning graph neural network (PIML-GNN) is …

Characterization Of Mechanically Recycled Polylactic Acid (Pla) Filament For 3d-Printing By Evaluating Mechanical, Thermal, And Chemical Properties And Process Performance, Mahsa Shabani Samghabady

All Theses

Polylactic acid (PLA) is a biopolymer made from renewable resources such as sugar and corn. PLA filament is a popular material used in Fused Deposition Modeling (FDM) 3D-printing. While this material has many advantages, all the failed parts, support structures, rafts, nozzle tests, and the many prototype iterations during the 3D-printing process contribute to the plastic pollution and release of greenhouse gases. Although PLA is biodegradable, it can take years to degrade in landfills. Instead of throwing away PLA waste and buying new filaments, PLA can be recycled. Amongst the different recycling technologies, mechanical recycling is the most environmentally friendly. …

A Predictive Analysis Of The Influence Of Thickness And Length On The Curvature Of Square Bistable Carbon Fiber Reinforced Composite Laminates, Stephan Terry

All Theses

This thesis presents a predictive analysis of the stability of square bistable carbon fiber reinforced composite laminates under various loading conditions. The stability of these laminates is essential to their performance and longevity and is influenced by factors such as thickness and length. Analytical and numerical techniques are used to model the behavior of these laminates, and experimental tests are conducted to validate the models. The findings of this research have implications for the design and optimization of square bistable carbon fiber reinforced composites.

The study investigates the relationships between the side length and thickness of square laminates for bistability. …

Comparative Design Space For Bistable Composites: An Integrated Framework Of Optimization, Finite Element Analysis, And Experimental Testing, Jonathan Bolanos

All Theses

Bistable composites are a class of advanced materials that can actuate between two stable shapes, making them attractive for a wide range of engineering applications. However, designing these composites to achieve optimal performance remains a challenging task. To address the challenge, this research develops an integrated framework that combines a genetic algorithm optimization technique, finite element analysis in Abaqus, and experimental testing to explore the design comparative space for square bistable composites composed of DA 409 carbon fibers. This leads to the study of generating an optimization algorithm to account for the relationship between the chances of a successful maximum …

Multiple Objective Function Optimization And Trade Space Analysis, Yifan Xu

All Theses

Optimization can assist in obtaining the best possible solution to a design problem by varying related variables under given constraints. It can be applied in many practical applications, including engineering, during the design process. The design time can be further reduced by the application of automated optimization methods. Since the required resource and desired benefit can be translated to a function of variables, optimization can be viewed as the process of finding the variable values to reach the function maxima or minima. A Multiple Objective Optimization (MOO) problem is when there is more than one desired function that needs to …

Tunable Filtration Of Particles During Dip-Coating, Connor Copeland

All Theses

When a solid substrate is withdrawn from a liquid bath a thin coating is deposited whose thickness is given by the Landau-Levich-Derjaguin (LLD) law. We perform an experimental study of dip coating of particle suspensions showing that particles of a given size can become entrained in the meniscus by the competition between viscous and surface tension forces. This is called capillary filtration and can be used as a tunable dynamic filter. For single particle suspensions, filtration can be in terms of either clumps or single particles, with the relevant entrainment points depending upon the rheology of the working fluid, either …

Creep Behavior Of A Ti-Based Multi-Principal Element Alloy, Benjamin Elbrecht

All Theses

Abstract

The understanding of microstructural damage mechanisms is the foundation of better understanding existing materials and future material development. There are significant challenges to measuring these damage mechanisms in-situ as continuous observation of the state of the microstructure is difficult or impossible for many experimental setups. This thesis presents a method for measuring grain boundary sliding (GBS) and local strain concentrations in-situ via a Heaviside function based algorithm. GBS is the shearing of two grains along their shared grain boundary and is a common damage mechanism in creep which presents as a discontinuity that can be measured with a Heaviside …

Examining The Different Snap-Through Characteristics Of Bistable Cfrp Composite Laminates, Vishrut Deshpande

All Theses

Bistable carbon fiber composites, whose bistability arises from having asymmetric fiber layouts in different layers, have shown immense potential for use in shape morphing and adaptive structure applications. While many studies in this field focus on these composite laminates’ external shapes at the two stable states, their snap-through behavior of shifting from one stable shape to the other remains a critical aspect to be investigated in complete detail. Moreover, symmetric loading conditions have been extensively studied based on the classical lamination theory, but the asymmetric loading conditions received far less attention. Therefore, this study examines an asymmetric, localized point load …

A Manufacturing-To-Response Pathway For Formed Carbon Fiber Reinforced Polymer Composite Structures, Madhura Limaye

All Theses

Over the past decade, there has been an increased adoption of thermoplastic and thermoset based continuous carbon fiber reinforced polymer (CFRP) composites for structural applications in several industries. Among the different manufacturing methods, thermoforming process for thermoplastic based continuous CFRP’s offer a major advantage in reducing cycle times for large scale productions. Similarly, out-of-autoclave curing process for thermoset based continuous CFRP’s using heated tooling enables production of large composite structures. However, these manufacturing processes can have a significant impact on the structural performance of parts by inducing undesirable effects. These effects include inhomogeneous fiber orientations, thickness variations, and residual stresses …