Applied Mechanics Commons^™

Numerical And Machine Learning Based Recreation Of Damage Morphologies Of Barely Visible Impact Damage, Oscar A. Valdez

Mechanical and Aerospace Engineering Dissertations

Composite laminates are highly sought after in the aerospace industry as they provide strength without dramatically increasing the weight of manufactured structures. However, composite laminates are susceptible to barely visible impact damage caused by routine activities. This type of damage can easily go unnoticed while significantly reducing the load-carrying capability of the laminate. Current non-destructive evaluation techniques, such as ultrasonic scanning, can reveal the damage footprint but provide no insight into delamination through-the-thickness due to the shadowing effect. Micro-computed tomography offers ply-by-ply damage resolution but is unsuitable for field inspections and is constrained by specimen size. This study aims to …

Application-Driven Materials Development Of Solid-State Conductive Composites Of Ultra-High Molecular Weight Polyethylene, Peder Solberg

Dartmouth College Ph.D Dissertations

Ultra-high molecular weight polyethylene (UHMWPE) is a linear long chain homopolymer valued for its toughness, wear resistance, and chemical inertness. In the medical field, these properties make it the material of choice for bearing surfaces despite recognized tradeoffs between wear resistance, toughness, and oxidation resistance. Electrically conductive composites of UHMWPE show promise to enable new types of smart and active load-bearing implants in a future of personalized medicine, if beneficial properties can be maintained with the addition of solid-state additives.

Clinical need-finding conducted through Dartmouth’s Training Program in Surgical Innovation revealed several potential applications for conductive, load-bearing polymers. These include: …

Degradation Of Polymers And Polymer Composites In Extreme Environments, Ben T. Jewell

Dissertations, Master's Theses and Master's Reports

Polymeric materials are widely used in engineering applications due to their high strength-to-weight ratio, easy manufacturability, and cost-effectiveness. When incorporated into composites, they provide further performance enhancements, enabling use in demanding structural applications. However, long-term exposure to harsh environments including elevated temperatures, UV radiation, harsh chemicals, and radiation, can drive degradation processes that alter the material’s network structure, and in turn, degrade its mechanical performance. Exposure to thermo-oxidative conditions is one of the most common environments driving polymer degradation, leading to chain scission and crosslinking events, with the resulting oxidative products causing discoloration, reduced ductility, and changes in glass transition …

Finite Element Analysis And Verification Of Transverse Mechanical Properties Of Generally Cylindrical Orthotropic Constitutive Modeling Of 3-Phase Nanocomposite Unit Cell, Christopher J. Hawkins

Master's Theses

Fiber-reinforced composites are increasingly popular due to their specific strength and stiffness, making them ideal for high-performance applications. However, these materials primarily exhibit superior properties in-plane, while their out-of-plane characteristics remain comparatively weaker. Previous research has shown that the most effective method to enhance out-of-plane properties involves the incorporation of carbon nanotubes. Experimental tests have demonstrated significant improvements in properties such as tension, flexural, short beam shear, and fracture toughness. Alongside these experimental studies, analytical equations have been developed to predict the behavior of these composites under various loading conditions, including tension, bending, shear, and fracture. Existing models primarily address …

Investigation Of Fatigue Response With Analytical And Machine Learning Models And Hygroscopic Analysis Of Asymmetric Bistable Cfrp Composites, Shoab Ahmed Chowdhury

All Dissertations

Asymmetric bistable carbon fibre reinforced plastic (CFRP) composites enable a broad range of applications as they can sustain multiple stable configurations and have small snap-through load requirements. These unique features, coupled with their light strength-to-weight and stiffness-to-weight ratios, have made them preferred options for multifunctional systems. This study investigates the fatigue and hygroscopic response of 2-ply, [0/90] bistable CFRP laminates and proposes predictive modeling approaches for improved performance.

While previous studies widely researched and documented the fatigue of general composites in axial loading, fatigue analysis of asymmetric bistable composites in the out-of-plane snap-through direction is inadequate. This study performs fatigue …

A Predictive Analysis Of The Influence Of Thickness And Length On The Curvature Of Square Bistable Carbon Fiber Reinforced Composite Laminates, Stephan Terry

All Theses

This thesis presents a predictive analysis of the stability of square bistable carbon fiber reinforced composite laminates under various loading conditions. The stability of these laminates is essential to their performance and longevity and is influenced by factors such as thickness and length. Analytical and numerical techniques are used to model the behavior of these laminates, and experimental tests are conducted to validate the models. The findings of this research have implications for the design and optimization of square bistable carbon fiber reinforced composites.

The study investigates the relationships between the side length and thickness of square laminates for bistability. …

Anisotropic Material Behavior Of 3d Printed Fiber Composites, Jordan Garcia

Theses and Dissertations--Mechanical and Aerospace Engineering

Literature has shown that 3D printed composites may have highly anisotropic mechanical properties due to variation in microstructure as a result of filament deposition process. Laminate composite theory, which is already used for composite products, has been proposed as an effective method for quantifying these mechanical characteristics. Starting with the analysis of comparing the printing orientation of premanufactured carbon fiber reinforced filament, the mechanical properties of 3D printed objects were examined. The mechanical properties changed not only as a result of machine choice, but how the sample is oriented along the printing bed. The analysis continued with looking at the …

Tensile Testing Environmental Chamber – Structural, Michael Ingel, Erik Soldenwagner, Austin Marshall, Lauren Schirle

Mechanical Engineering

Environmental chambers for tensile testing machines are used to study how a multitude of materials behave in extreme temperatures. These chambers provide the necessary information to innovate cutting edge technology for materials in fields such as aerospace. These chambers are often heavy and expensive requiring a significant amount of time and money just in the installation process alone. This report will serve to outline and define the design and fabrication of an environmental chamber, conducted by a team of four senior mechanical engineering students at California Polytechnic State University, San Luis Obispo. The goals of the project include a low-weight …

Enduro Campers, Ryan J. Shomsky, Alexander W. Horst, Kevin S. Pickering, Jackson L. Aplanalp, Luke Arana, Will Firestone

Mechanical Engineering

The Enduro Campers senior project team (Formerly known as Lobo Campers senior project team) was recruited by Mr. Leif Stein to assist in the design, manufacturing, and testing of the materials and components of his company’s expedition box camper. The two main focuses of the project, divided into two sub-teams, were on the testing and manufacturing process of the materials used in the camper, and on the design and analysis of the camper’s access door, step box, and other subsystems.

The focus of the materials analysis and manufacturing team was based around the design parameter to use composite sandwich panels …

Peridynamic Approaches For Damage Prediction In Carbon Fiber And Carbon Nanotube Yarn Reinforced Polymer Composites, Forrest E. Baber

Theses and Dissertations

Aerospace structures are increasingly utilizing advanced composites because of their high specific modulus and specific strength. While the introduction of these material systems can dramatically decrease weight, they pose unique certification challenges, often requiring extensive experimental testing in each stage of the design cycle. The expensive and time-consuming nature of experimental testing necessitates the advancement of simulation methodologies to both aid in the certification process and assist in the exploration of the microstructure design space.

Peridynamic (PD) theory, originating from Sandia National Lab’s in the early 2000’s, is a nonlocal continuum-based method that reformulates the equation of motion into an …

Investigation Of Design, Manufacture, Analysis, And Test Of A Composite Connecting Rod Under Compression, Thomas Juhl Rohrbach

Master's Theses

Composite materials hold great potential for the replacement of traditional materials in machines utilized on a daily basis. One such example is within an engine block assembly where massive components inherently reduce the efficiency of the system they constitute. By replacing metal elements such as connecting rods, cylinder caps, or a crank shaft with composite alternatives, a significant increase in performance may be achieved with respect to mechanical strength, thermal stability, and durability, while also reducing mass. Exploration of this technology applied to a connecting rod geometry was investigated through a combination of process development, manufacturing, numerical analysis and testing. …

Prove Endurance Car Front Suspension, Lauren A. Williams, Logan Simon, Justine G. Kwan

Mechanical Engineering

This document details the collaborative Mechanical Engineering Senior Project with Cal Poly PROVE Lab on PROVE Lab’s Project 2; an electric vehicle designed to travel 1000 miles on a single charge. Logan Simon, Justine Kwan, and Lauren Williams are given the challenge of designing an innovative proof of concept front suspension suspension for this vehicle.

After detailed research of new suspension systems, it was determined that the innovative nature could be in the form of unique manufacturing methods, materials use, or mechanical design. At this point in time, this vehicle is a purely conceptual design with no concrete requirements. Therefore …

Drawing And Twisting Of Graphene Fibers, Gregory T. Lane, Robert J. Sekerak, Isaias Diaz

Mechanical Engineering

The aim of this project was to develop a more automated process for drawing and twisting of graphene fibers than was currently in place. This was implemented by having two chemical baths with variable speed rollers at either end, and intermediate roller to spool fiber between stages, and a twisting cylinder with integral spool to twist the fiber as it is collected. The goal was to have this first iteration deliver a working prototype, however due to manufacturing delays and timing constraints, that will be missed. A second follow-on project would be able to continue the work presented here and …

Finite Element Modeling Of Delamination Damage In Carbon Fiber Laminates Subject To Low-Velocity Impact And Comparison With Experimental Impact Tests Using Nondestructive Vibrothermography Evaluation, George Rodriguez Iv

Master's Theses

Carbon fiber reinforced composites are utilized in many design applications where high strength, low weight, and/or high stiffness are required. While composite materials can provide high strength and stiffness-to-weight ratios, they are also more complicated to analyze due to their inhomogeneous nature. One important failure mode of composite structures is delamination. This failure mode is common when composite laminates are subject to impact loading.

Various finite element methods for analyzing delamination exist. In this research, a modeling strategy based on contact tiebreak definitions in LS-DYNA^®was used. A finite element model of a low-velocity impact event was created to …

Experimental And Finite Element Studies Of Shock Transmission, Eldon Jerry Goddard

UNLV Theses, Dissertations, Professional Papers, and Capstones

Composite materials are more widely used today in engineering products than ever before. Shock transmission in jointed composite sections needs to be investigated to understand the affect of composite materials on the dynamic response of the system. There exists limited published work on transient shock propagation through composite sections. The aim of this study is to analyze the transient behavior of joints in composite materials subjected to low impact loads and to develop a computational model that provides an improved physics based shock model. The jointed connection will be investigated experimentally and using Finite Element Analysis (FEA). The bolted joint …

Drape Forming Machine, Adam Johnson, Will Schlosser, Brian Miller

Mechanical Engineering

The goal of this project was to build a prototype machine that formed multiple sheets of debulked pre-preg OOA carbon fiber into a 2-foot long trapezoidal shape. The machine was required to do this process semi-automatically.

Carbon Fiber Leaf Springs For Adaptive Cross Country Skiing, William Drew Atkinson

Master's Theses

This work describes the development of a custom sit ski for US Ski Team paralympian Greg Mallory from concept through prototype fabrication. The ski consists of a custom seat molded specifically for the athlete, carbon fiber leaf springs, and a custom binding attachment system compatible with NNN style cross country bindings. The sit ski is designed to maximize poling power through the use of an upright rather than reclined seating position, allowing for increased utilization of core muscle strength. The springs were designed based on information gathered by a custom National Instruments data acquisition system, and stiffness analysis was conducted …